So I bought this Xperia SP off a friend, It had the ExistenZ 3.0.0 Rom and I updated it to the 3.3.0 OTA version. Obviously this means I can get into both recoveries that come with the ROM TWRP and Philz. I want to go back to stock now but I can't flash the stock .tft with flashtool or SUS because I can't get into Fastboot or Flashmode. When I plug the cable in and hold Vol + to get into Fastboot it does nothing and just boots normal. When I hold Vol - the main green led comes on like it should, I get an error on the PC saying the device cannot be recognised and it has malfunctioned before it could be connected and then the Green LED goes off after around 5 seconds and then it restarts and continues to boot normally. However once the main boot sequence has started I can get into the recoveries using the Vol +/- and I can flash ROM's. Is this a kernel issue ? Also I think there maybe a loss of baseband because I keep getting that no sim can be recognised but I'm unsure which is why I want to go back to stock. I also can't see if my bootloader is locked or not because the service menu app crashes when I try to see :/ It never actually gets into fastboot or flashmode.
What I'm asking is, How and if I should try and flash the stock kernel to see if I can get the FastBoot and FlashMode back.
I have Windows 8 and have installed the correct drivers by disabling signature enforcement.
Edit: I can see that it is actually trying to get into flashmode
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks in advance guys
Ricehead said:
Snip
Click to expand...
Click to collapse
Solved after repeating the driver installation process etc on a different PC (My samsung tablet :/ ) Please Close
Related
First sorry for my bad english, I´m new here, but I have flashed a TRWP Recovery for this device and I have rooted it, but when the device runs out off the battery, It get stuck in this...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The device doesn´t start, don´t turn off, and when I tried to start it into the bootloader mode the adb says that it is unauthorized.
Please some help.
yulian6766 said:
First sorry for my bad english, I´m new here, but I have flashed a TRWP Recovery for this device and I have rooted it, but when the device runs out off the battery, It get stuck in this...
The device doesn´t start, don´t turn off, and when I tried to start it into the bootloader mode the adb says that it is unauthorized.
Please some help.
Click to expand...
Click to collapse
it seems you recovery its corrupted. flash it again.
charge device for a while them remove USB cable before power on. (TRWP bug)
power and vol+ for 10s to restart device.
kativiti said:
it seems you recovery its corrupted. flash it again.
charge device for a while them remove USB cable before power on. (TRWP bug)
power and vol+ for 10s to restart device.
Click to expand...
Click to collapse
It works! but you are right the recovery image were corrupted, and fix it flashing again, thanks a lot.
I just tried to install MagiskManager and I tape on "Install to Inactive Solt"
and now QUALCOMM CrashDump Mode screen show me all the time
and I cant get in recovery mode please help me!!!
Hold volume down plus power to hard reset then immediately switch to holding volume up.
After that you should be able to plug your phone in and reflash the stock boot image.
I tried its didn’t work..
eliastheone said:
I tried its didn’t work..
Click to expand...
Click to collapse
But you can get to fastboot mode, right? I think you need to flash raw rom and start again. Unless someone else has any suggestions...
reg66 said:
But you can get to fastboot mode, right? I think you need to flash raw rom and start again. Unless someone else has any suggestions...
Click to expand...
Click to collapse
No, I couldn’t get in fastboot please help me!
eliastheone said:
No, I couldn’t get in fastboot please help me!
Click to expand...
Click to collapse
Sorry dude, no idea what to suggest of you can't even reach fastboot..
And you've plugged it into the USB on the side, right? 8 know sometimes I forget that I have to use the side one when flashing boot images and things.
No reason why magisk would cause that issue.
okay guys now somehow I cant get in the fastboot but I get this massage
"FAILED, fastboot.exe flash all WW_ZS660KL_16.0631.1908.12_M3.13.33.28-ASUS_1.1.3_Phone-user.raw failure, EXIT"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can get in it? If you can just flash the unrooted boot image.
I bought a used phone. The boot loader was unlocked from the beginning. I'm doing the steps to install Android 10, but something is weird.
I tried to go through the fastboot mode, but when I press the button, it doesn't respond, so I enter the computer through adb and there is no response, and then it returns to the system soon. When entering the boot loader mode to adb, a blue LED turns on. When I enter the recovery mode into adb, there is no reaction the same as when entering the fastboot. Also, when the power is turned off and plugged in, it automatically enters the flash mode.
When I first use the phone, the battery level is displayed when I plug it in, and it responds when I turn it on, but when I reinstall the stock rom of the same version with flashtool, nothing happens. There is no response even though I installed the 8.0 global version with the flashtool obtained from the deveploperworld homepage.
Strangely, the Android system works fine.
What should I do?
(I am Korean, and the sentences may be weird using Google Translate. Please understand.)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I installed the Google USB driver and updated it, but it looks like this..
problem Solved!
Inscartia said:
I installed the Google USB driver and updated it, but it looks like this..
Click to expand...
Click to collapse
Solved the problem! If the Google USB driver does not work when recognized as other devices, try updating with the Samsung USB driver. It is recognized as a samsung adb interface and is recognized as normal in the fastboot devices command. You can install twrp in this state!
I have 2 phone same XZ2 ( SOV37 , unlocked sim by qunlocktool )
I'm so stupid when tried to restore backup file of different of 2 different phones by qunlocktool...
Now this phone bricked
- Hold power button just see green led flash and nothing happen
- Hold power and volume up button got nothing , no led
- Still can flash rom but after done , still same...
Can I recover my phone ?
Thanks for any sugguest!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looks like you'll need to revert back to stock. You can get the firmware with Xperifirm software on your PC.
Then flash the phone with FlashTool.
It's been a while since I did this on my XZ2c so I can't provide more details, but reading about those two links should get you started.
zpunout said:
Looks like you'll need to revert back to stock. You can get the firmware with Xperifirm software on your PC.
Then flash the phone with FlashTool.
It's been a while since I did this on my XZ2c so I can't provide more details, but reading about those two links should get you started.
Click to expand...
Click to collapse
Thank you but i had to tried it before , nothing happen
sinommo said:
Thank you but i had to tried it before , nothing happen
Click to expand...
Click to collapse
Try using Sony Companion. SOMC Flash Device using same fastboot command so can be faked to fastboot.
Hi guys,
My pixel 5 died recently while playing a video. It will not turn on, nor make any sound. There is no haptic feedback as well when I start the device. The only time it is detected is when I boot it up in fastboot mode (Press and hold Power and Vol Down). It is detected as Pixel 5 on windows pc. It is detected under fastboot devices but I can't seem to do anything else with it. I am unable to get an adb connection. I don't remember if usb debugging was turned on or not on my device before it died, it most likely was enabled but can't get it connected via adb.
Note: The phone is bootloader locked
My question is can I recover my data from the phone through fastboot only without a working display?
Thanks.
Perhaps you could try booting into twrp and see if you can access the data that way?
Thanks. I did try that but I can't really boot into recovery as the device is bootloader locked.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
nabeeltariq said:
Thanks. I did try that but I can't really boot into recovery as the device is bootloader locked.
Click to expand...
Click to collapse
Oh no. I hope someone can prove me wrong but I believe your only option now is to send it in for a repair.
swangjang said:
Oh no. I hope someone can prove me wrong but I believe your only option now is to send it in for a repair.
Click to expand...
Click to collapse
This. Without bootloader unlock, your chances of dumping partitions are zero.
@nabeeltariq Are you able to access stock recovery? You may be able to sideload an OTA package to get working again.