Hi Everyone, i have searched through the forums and tried what has been said, but still no luck. I have a galaxy Gear V700
I tried numerous times on kies to update and it just would not play ball at all.Even leaving it over night, thinking maybe it is downloading something.
Today i have used Odin today, and flashed with V700XXUCNF1_V700OXACNF1_BTU
Within Odin it does the following
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
then it freezes. Because it had froze for about 25 minutes, i unpluged the Gear, to try again. All of a sudden Odin jumped up and said failed, and the Gear now is stuck with "Firmware Upgrade encountered an issue, please select recovery mode in kies and try again"
Problem is Kies 2 and 3 do not recognise the watch anymore. Odin seems to recognise it but wont allow me to do anything . I have tried using Odin to flash an original stock image, and have even tried the earlier Tizan.
I am still stuck...
I am a complete newbie on here and do not really know much about the phones and watches, but got so frustrated at not being able to upgrade the traditional way.
Any help would be greatly appreciated..
Many thanks
I am now getting this in Odin 3.09, so it seems to be going a little further, but still fails at the end
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> V700XXUCNF1_V700OXACNF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> zImage
You have to update to Tizen version NE9 first through ODIN 3.09, then update to NF1. Do not skip this step.
It has already been talked about here:
http://forum.xda-developers.com/showthread.php?t=2794780
bballengphd said:
You have to update to Tizen version NE9 first through ODIN 3.09, then update to NF1. Do not skip this step.
It has already been talked about here:
http://forum.xda-developers.com/showthread.php?t=2794780
Click to expand...
Click to collapse
Sorry being a pain in the backside, but where do i get the NE9 as all the update files i have downloaded none have NE9 or the NF1 in there names... How do i know which is the right one..
Thanks
Go here to get the NE9 for your region.
http://samsung-updates.com/device/?id=SM-V700
Many thanks
That has fixed it..... SO basically what i was doing i think, was flashing it with an update to Tizan, not the update from android to Tizan. DOH
Thanks to all that helped
.,
Related
Hi Everyone, i have searched through the forums and tried what has been said, but still no luck. I have a galaxy Gear V700
I tried numerous times on kies to update and it just would not play ball at all.Even leaving it over night, thinking maybe it is downloading something.
Today i have used Odin today, and flashed with V700XXUCNF1_V700OXACNF1_BTU
Within Odin it does the following
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
then it freezes. Because it had froze for about 25 minutes, i unpluged the Gear, to try again. All of a sudden Odin jumped up and said failed, and the Gear now is stuck with "Firmware Upgrade encountered an issue, please select recovery mode in kies and try again"
Problem is Kies 2 and 3 do not recognise the watch anymore. Odin seems to recognise it but wont allow me to do anything . I have tried using Odin to flash an original stock image, and have even tried the earlier Tizan.
I am still stuck...
I am a complete newbie on here and do not really know much about the phones and watches, but got so frustrated at not being able to upgrade the traditional way.
Any help would be greatly appreciated..
Many thanks
:crying::crying::crying:
I am now getting this in Odin 3.09, so it seems to be going a little further, but still fails at the end
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> V700XXUCNF1_V700OXACNF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> zImage
s0mewhitedude said:
I am now getting this in Odin 3.09, so it seems to be going a little further, but still fails at the end
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> V700XXUCNF1_V700OXACNF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> zImage
Click to expand...
Click to collapse
I had this issue when trying to flash an incorrect image.
Sent from my SPH-L900 using XDA Premium HD app
I have just answered your question in the Q&A forum.
Also a suggestion, please do not post questions in the General forum, and do not double post.
Hi everyone,
I bought a new samsung s6 and rooted it using pingpong, now i must unroot it so i can install the new update, well i downloaded the firmware stock odin 3.10, but everytime i try unrooting it usin odin i have this message
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My samsung is a G920F
firmware i trying to use is G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5
im so desesperate i tried so many time but no changing at all can someone help Me please
Thanks
Must use Odin v3.10.6
Neostatic17 said:
Hi everyone,
I bought a new samsung s6 and rooted it using pingpong, now i must unroot it so i can install the new update, well i downloaded the firmware stock odin 3.10, but everytime i try unrooting it usin odin i have this message
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My samsung is a G920F
firmware i trying to use is G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5
im so desesperate i tried so many time but no changing at all can someone help Me please
Thanks
Click to expand...
Click to collapse
wp4jot said:
Must use Odin v3.10.6
Click to expand...
Click to collapse
Hi wp4jot,
i have used odin 3.10.6 but it still don't work do you have an idea why its not working , or how can i solve this problem
Thanks
I don't. Did you flash all 4 files at once?
Neostatic17 said:
Hi wp4jot,
i have used odin 3.10.6 but it still don't work do you have an idea why its not working , or how can i solve this problem
Thanks
Click to expand...
Click to collapse
I had this problem.. You must have v3.10.6 and flash every file in the corresponding place, after that I still got a fail message but I tried un-checking the auto reboot option and that did the trick (this will make the phone stay in download mode even after you complete the flash, to quit download mode you must press the volume down button and the power button at the same time for about 10 seconds) hope that helps, let me know.
vontokkerths said:
I had this problem.. You must have v3.10.6 and flash every file in the corresponding place, after that I still got a fail message but I tried un-checking the auto reboot option and that did the trick (this will make the phone stay in download mode even after you complete the flash, to quit download mode you must press the volume down button and the power button at the same time for about 10 seconds) hope that helps, let me know.
Click to expand...
Click to collapse
I Have the same problem with S6- SMG20T (Dutch) Now trying to un-check the auto reboot otion. Hope it works for me.
didn't worked for me
wp4jot said:
I don't. Did you flash all 4 files at once?
Click to expand...
Click to collapse
What do you mean with that? witch 4 files?
Hope you can help me.
After a factory swipe and installing vodafone wallet on my S6 it says that it doesn't work on a rooted Phone
You have to put each file in the corresponding place, when you download the stock rom after you've extracted the zip you're supposed to have a file called AP, BL, CSC, AND the other which I cannot remember, those are the files you're supposed to flash, if you try to flash just AP like on the screenshot it's not going to work.
Neostatic17 said:
Hi everyone,
I bought a new samsung s6 and rooted it using pingpong, now i must unroot it so i can install the new update, well i downloaded the firmware stock odin 3.10, but everytime i try unrooting it usin odin i have this message
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My samsung is a G920F
firmware i trying to use is G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5
im so desesperate i tried so many time but no changing at all can someone help Me please
Thanks
Click to expand...
Click to collapse
I think you downloaded the wrong firmware for your phone, your phone is G920F and the firmware you are trying to flash is G925F.
@Neostatic17, it looks like you downloaded the wrong file. The file should be a tar.zip, not tar.md5. Once you download the correct tar.zip, extract the file and you will see 4 files within the one file you downloaded. Then flash all 4 files with odin.
Edit...Ok, I've checked my pc and the file is a tar.zip before you extract it and once it's extracted, there are 4 tar.md5 files. All you have to do is put the AP file in the AP slot, BL file in the BL slot and so on. I leave auto reboot checked, but that is up to you.
Hey guys need a little help here, i just bought a motherboard for my girlfriends s5, the old one seemed to overheated and died, yeah seriously. was just sitting on the bed.
I just spent $100 to get an AT&T Mobo, cracked open the phone and installed it. (The LCD is really thin, but to my suprise is really strong)
Stock Android 5.0 L, tried to to downgrade to 4.4.4, realize i cant now because of locked bootloader. trying to just restore back to Android 5 now.
Recovery mode presents " Firmware upgrade encountered an issue, Please select recovery mode in kies"
Download mode presents " SW Rev Check Fail : [aboot] fused > 4 Binary 3 "
I suppose this is because i flashed 4.4.2 in Odin the following
AP, CP, CSC
BL was NOT flashed!
Currently tried to find BL, AP, CP and CSC for 5.0 L, figure it would solve the problem
However my google-fuu leads me no awnsers, Closest thing i could find was.
theandroidsoul dot com /att-galaxy-s5-lollipop-update-odin-firmware-80652/
looks like it will flash 5.0 software, but.
My odin fails everytime i try, I have tried this on two computers, Windows 7 & 8
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> One Click Downloader Mode
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003>
<ID:0/003>
<OSM> All threads completed. (succeed 0 / failed 1)
I really dont think its a driver issue., tried multiple cables.
Thanks
So somehow I've managed to delete my OS on my note 5 model N9208. I've downloaded the correct firmware (i think) from sammob but when I try and flash it with Odin, Odin just crashes. I have tried putting the ROM onto a USB to MicroUSB but TWRP isn't picking up the stick.
Help please :crying:
EDIT:
Odin just come back with this
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can anybody help me please? Or just tell me if I am downloading the right ROM?
Download Samsung Smart Switch and use it. It will work and there will be no guessing which firmware you need.
CodeNameRedNeck said:
Download Samsung Smart Switch and use it. It will work and there will be no guessing which firmware you need.
Click to expand...
Click to collapse
Smart switch doesn't recognise my device, my phone doesn't get past the screen where it states it's a Note 5.
Just adb sideloaded Nameless custom rom and I've managed to get it to go to the Samsung splashscreen but won't go any further. Not sure on what to do now.
Managed to get it sorted by sideloading a custom ROM with TWRP and left it on the Samsung splashscreen for a bit. To say I only got my first ever android phone on Tuesday I am proud of myself!
/thread.
inxy said:
Managed to get it sorted by sideloading a custom ROM with TWRP and left it on the Samsung splashscreen for a bit. To say I only got my first ever android phone on Tuesday I am proud of myself!
/thread.
Click to expand...
Click to collapse
Dear Sir.
You Should Be Proud.
I am In The Same Boat As Your's.
Kindly Provide Me With PIT File.
I will be grateful.
And Have You Succeeded In Getting ODIN to Flash?
Regards
Its not a PIT File. He sideloaded a ZIP through TWRP.
fkofilee said:
Its not a PIT File. He sideloaded a ZIP through TWRP.
Click to expand...
Click to collapse
I Know That
But I want a PIT file
If He can help Me with That I will be gRateful
ok so we both have note 4s and i rooted both of our phones many months ago. i put poprocks v.13 on both phones and everything worked out fine. well over time that rom became outdated so i decided to update the phones. i updated mine to N910TUVU2EPE3_N910TTMB2EPE3_N910TUVU2EPE3_HOME.tar modem and the overdrive rom. had a few hick ups but over all went fine and my phone works great. so i decided to upgrade hers tonight. i put her phone into download mode and started odin. loaded the N910TUVU2EPE3_N910TTMB2EPE3_N910TUVU2EPE3_HOME.tar.md5 and hit start. well it failed and now the phone wont do anything. no matter what i do in odin it fails. ive tried cf-auto root it fails to. phone under download mode says blocked by r/l. odin usally stays stuck on setup connection. any ideas how to get this thing working again before she kills me?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-trltetmo-trltetmo-smn910t.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img.ext4
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Delete the .md5 and just leave it as .tar
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
assuming you ment delete the md5 from the name of file. it didnt work.
just tried cf-root with odin on her laptop and same result. seems like this phone is a paperweight. im completely dumb founded. we have the exact same phones and i did hers the same way as mine. hers failed on the first step and now it looks like im buying her a new phone. this thing wont do anything at all. it can go into download mode but no matter what you try to load through odin fails.
osiris999 said:
just tried cf-root with odin on her laptop and same result. seems like this phone is a paperweight. im completely dumb founded. we have the exact same phones and i did hers the same way as mine. hers failed on the first step and now it looks like im buying her a new phone. this thing wont do anything at all. it can go into download mode but no matter what you try to load through odin fails.
Click to expand...
Click to collapse
Do you use hangouts (google) or Skype (chat)?
It seems it would be easier to help via one of those mediums.
osiris999 said:
just tried cf-root with odin on her laptop and same result. seems like this phone is a paperweight. im completely dumb founded. we have the exact same phones and i did hers the same way as mine. hers failed on the first step and now it looks like im buying her a new phone. this thing wont do anything at all. it can go into download mode but no matter what you try to load through odin fails.
Click to expand...
Click to collapse
Dupe
I was finally able to fix this thing using Samsung smart switch emergency recovery.
osiris999 said:
I was finally able to fix this thing using Samsung smart switch emergency recovery.
Click to expand...
Click to collapse
Glad you got it working. Looks like reactivation lock was turned on on hers but not yours. I always keep it off on my devices as I would forget to check.
Sent from my SM-N910T using XDA Free mobile app