Related
i got Samsung Galaxy Note N7000
Baseband N7000XXLR but sometimes unknown
Kernel Version 3.0.15 Hydra Core V7
BUILD Number : IMM76D.XXLRQ
Running on 4.0.4 ICS
Boots takes too long in "samsung Galaxy Note n7000" and the "Samsung" it takes 10-15mins
my main problem is , that Baseband is unknown, Media/Video Player, Camera, Phone Contacts, Phone are not responding .
and in home always says "Process System is not responding"
the keyboard is not responding too, i cant even access aboutphone>Status .
and it keeps restarting,
what should i do?
Are you rooted ? If so, Make a backup of your apps with titanium backup, then, providing your on a safe kernel, Boot into recovery and do a factory reset.
If you are not on a safe kernel, then download one and flash it, Philz kernel can be flashed in stock recovery, Hydracore can be flashed via odin, the choice is yours.
Let me know if the issues persist after the reset.
when you go to about phone> can you see you IMEI number?
azzledazzle said:
Are you rooted ? If so, Make a backup of your apps with titanium backup, then, providing your on a safe kernel, Boot into recovery and do a factory reset.
If you are not on a safe kernel, then download one and flash it, Philz kernel can be flashed in stock recovery, Hydracore can be flashed via odin, the choice is yours.
Let me know if the issues persist after the reset.
Click to expand...
Click to collapse
Yes, where can i download titanium?, im using hydracore v7, how can i flashed it in stock ?
its really difficult to answer when you make 3 thread with the same issue. by the way as per previous thread, have you flashed a new firmware using Odin???
This is what i replied there
*****************************************************************************************************************
Did you download the firmware from the above thread?.. if yes unzip it and you will get a tar.md5 file. also go to philz thread and download a kernel that is same as the rom you downloaded. put the kernel in the external SD keep the rom file on PC.
now boot into download mode. ( vol dwm + pwr + home till you see N7000 logo and release). you will enter a screen asking for vol up to confirm,. press vol up
open odin on pc and connect the phone to it. the box on the left will show yellow. click on the PDA tab and navigate to the rom file. dont tick anything else other than default what is there, press start and wait for it to finish. phone will autoboot . now check if the phone is working fine or not. ... reply back for more TS
nokiamodeln91 said:
its really difficult to answer when you make 3 thread with the same issue. by the way as per previous thread, have you flashed a new firmware using Odin???
This is what i replied there
*****************************************************************************************************************
Did you download the firmware from the above thread?.. if yes unzip it and you will get a tar.md5 file. also go to philz thread and download a kernel that is same as the rom you downloaded. put the kernel in the external SD keep the rom file on PC.
now boot into download mode. ( vol dwm + pwr + home till you see N7000 logo and release). you will enter a screen asking for vol up to confirm,. press vol up
open odin on pc and connect the phone to it. the box on the left will show yellow. click on the PDA tab and navigate to the rom file. dont tick anything else other than default what is there, press start and wait for it to finish. phone will autoboot . now check if the phone is working fine or not. ... reply back for more TS
Click to expand...
Click to collapse
Sorry, no still the same,
------
yeah i downloaded the firmware that you gave me, who's philz? same kernel? wait i dont understand the "same kernel and same rom?"
Titanium
jrabz18 said:
Yes, where can i download titanium?, im using hydracore v7, how can i flashed it in stock ?
Click to expand...
Click to collapse
Titanium u can find on google play.
N as nokiamodel says first flash a philz kernel on yr phone .
Wipe all 3 major elements n the flash a stock samsung ics firmware of yr region via odin.
N mainly if u want yr phone in good condition stick onto 1 thread which u ve created.
nokiamodeln91 said:
when you go to about phone> can you see you IMEI number?
Click to expand...
Click to collapse
i cant
shabhrish said:
Titanium u can find on google play.
N as nokiamodel says first flash a philz kernel on yr phone .
Wipe all 3 major elements n the flash a stock samsung ics firmware of yr region via odin.
N mainly if u want yr phone in good condition stick onto 1 thread which u ve created.
Click to expand...
Click to collapse
sorry, i cant access wifi and google play, bcos my keyboard is not responding
jrabz18 said:
Sorry, no still the same,
------
yeah i downloaded the firmware that you gave me, who's philz? same kernel? wait i dont understand the "same kernel and same rom?"
Click to expand...
Click to collapse
which ROM did you flash? It seem you are still on the OLD rom.
Phil is a guy who makes safe stock kernels ( great) .. http://forum.xda-developers.com/showthread.php?t=1901191
when you flash the new rom check the BUILD Number eg: as you have now "IMM76D.XXLRQ" so download the LRQ kernel from his thread. If you flash a latest one then as per the eg above.
First flash the rom...
---------- Post added at 06:02 PM ---------- Previous post was at 06:02 PM ----------
jrabz18 said:
i cant
Click to expand...
Click to collapse
You can see the IMEI number becasue you can navigate to it? or is it showing unknown?
nokiamodeln91 said:
which ROM did you flash? It seem you are still on the OLD rom.
Phil is a guy who makes safe stock kernels ( great) .. http://forum.xda-developers.com/showthread.php?t=1901191
when you flash the new rom check the BUILD Number eg: as you have now "IMM76D.XXLRQ" so download the LRQ kernel from his thread. If you flash a latest one then as per the eg above.
First flash the rom...
---------- Post added at 06:02 PM ---------- Previous post was at 06:02 PM ----------
You can see the IMEI number becasue you can navigate to it? or is it showing unknown?
Click to expand...
Click to collapse
i tried to flash Rocket Rom together with Hydracore but it doesnt work so i flash ICS again in Pc Odin, and flash Hydracore OC,.
so i think i have the OLD rom?,
Seriously there's no IMEI in About phone
click on status again: IMEI = 15 digit and IMEISV = 2 digits
nokiamodeln91 said:
click on status again: IMEI = 15 digit and IMEISV = 2 digits
Click to expand...
Click to collapse
its the first time i saw it , baseband is ok now but later on unknown again.
i can see my IMEI and IMEISV,
now dial *#1234# on the dialer and see
PDA
Phone:
CSC
any that is blank?
nokiamodeln91 said:
now dial *#1234# on the dialer and see
PDA
Phone:
CSC
any that is blank?
Click to expand...
Click to collapse
now that the baseband unknown i can't access phone status again ,
i cant go to dial it goes to phone contacts, i cant type nor the keyboard show
also go to http://forum.xda-developers.com/showthread.php?t=1645202 and download the XXLR1 modem and place it on the internal SD. and install mobile odin.
open mobile odin and choose the modem.bin file you downloaded in modem section and flash it
nokiamodeln91 said:
also go to http://forum.xda-developers.com/showthread.php?t=1645202 and download the XXLR1 modem and place it on the internal SD. and install mobile odin.
open mobile odin and choose the modem.bin file you downloaded in modem section and flash it
Click to expand...
Click to collapse
i dont have mobile odin, i use cwm and Pc Odin.
there is a lite version FOC
http://forum.xda-developers.com/showthread.php?t=1347899
nokiamodeln91 said:
there is a lite version FOC
http://forum.xda-developers.com/showthread.php?t=1347899
Click to expand...
Click to collapse
how can i install it?
you can use CWM to flash it as well.
Mobile odin is installed just as any other app, put on internal storage and install the apk
So I tried to install a rom and every thing went fine. I rebooted my phone via clockworkmod and then it shows me the logo of Galaxy mini 2 and the screen gets whiter and whiter. I tried going back to CWM but it wont open the only thing i can do is go to download mode.
So if somebody coud help me i would appreciate it.
Have you tried reflashing stock?
So are we now creating new topic for every brick? I had the same problem, it's a brick. What did you do?
TheWhisp said:
So are we now creating new topic for every brick? I had the same problem, it's a brick. What did you do?
Click to expand...
Click to collapse
Sorry I didnt know there was a topic already made. I accidently flashed with CWM a rom that was not made for galaxy mini 2. So is there a way to unbrick it using odin?
easy
MINI 2 said:
Sorry I didnt know there was a topic already made. I accidently flashed with CWM a rom that was not made for galaxy mini 2. So is there a way to unbrick it using odin?
Click to expand...
Click to collapse
go into download mode and flsh stock rom via odin
did you flash the trebon build ? If so, you should be able just to reflash with odin
TheWhisp said:
did you flash the trebon build ? If so, you should be able just to reflash with odin
Click to expand...
Click to collapse
Yes i flashed the trebon build. Can somebody explain me how to flash roms with odin because i know only how to flash them with CWM?
MINI 2 said:
Yes i flashed the trebon build. Can somebody explain me how to flash roms with odin because i know only how to flash them with CWM?
Click to expand...
Click to collapse
Download a rom from sammobile for GT-S6500(D or whatever) then download odin3 put ur phone in DL mode press power vol down and home
Install kies and reboot pc
Open Odin3 go to PDA and select the file u downloaded
Press start and wait
Sent from my GT-S6500D using xda app-developers app
MINI 2 said:
Yes i flashed the trebon build. Can somebody explain me how to flash roms with odin because i know only how to flash them with CWM?
Click to expand...
Click to collapse
You could follow my TUT here. xD
take the flashing guide part
Next time, please, check carefully what you're flashing.
Thank you all for your comments.
TheWhisp said:
Next time, please, check carefully what you're flashing.
Click to expand...
Click to collapse
Will do.
How could you even flash it since the updater-script cancels installation if the device name/model number is not in the list?
TheWhisp said:
How could you even flash it since the updater-script cancels installation if the device name/model number is not in the list?
Click to expand...
Click to collapse
Idk, i downloaded it and installed with CWM 6.0.2.8. I havent had any error or warning.
If you can access the Download Mode flash the stock firmware.. mine can't even acces the Download Mode even with USBJig, it still shows a white line..
he had a soft brick, you had a hard brick.. take it to the service center
This should be posted in Q n A not in Android Development.
then report it...posting there is waste of time...since most or all of mini 2 users are here...
Please help,
I was trying to root my Samsung galaxy note gt-i9220, I followed the video instructions from rootgalaxynote.com, I used the CWM.Zip, CWM-supers-v0.87.zip and after I installed the franco kernel-r5.zip
PROBLEM: after installing the franco kernel when I restarted the system my note comes on and shows Galaxy Note GT-I9220 and after that I have a black screen.
What can I do to get back the original state, it seems I can not handle rooting it. However it can get to the download mode when I place the volume up+power+home burton.
NB: I did not use a computer while doing this neither did I backup any thing
What rom where you on before installing the new kernel?
tudeine said:
Please help,
I was trying to root my Samsung galaxy note gt-i9220, I followed the video instructions from rootgalaxynote.com, I used the CWM.Zip, CWM-supers-v0.87.zip and after I installed the franco kernel-r5.zip
PROBLEM: after installing the franco kernel when I restarted the system my note comes on and shows Galaxy Note GT-I9220 and after that I have a black screen.
What can I do to get back the original state, it seems I can not handle rooting it. However it can get to the download mode when I place the volume up+power+home burton.
NB: I did not use a computer while doing this neither did I backup any thing
Click to expand...
Click to collapse
Hello.
ROM type
nokiamodeln91 said:
What rom where you on before installing the new kernel?
Click to expand...
Click to collapse
Am sorry to say but I have no idea which rom I was using, this was my first time rooting, a friend of mine bought me this phone on a visit to china, and so I believe it was the custom rom.
And I remember it was running version 4.1.2 of the Operating system, am sorry am making it difficult to get help, but a gud learning lesson, please help.
tudeine said:
Am sorry to say but I have no idea which rom I was using, this was my first time rooting, a friend of mine bought me this phone on a visit to china, and so I believe it was the custom rom.
And I remember it was running version 4.1.2 of the Operating system, am sorry am making it difficult to get help, but a gud learning lesson, please help.
Click to expand...
Click to collapse
As far as i remember there is no franco kernel for jb 4.1.2. That's why your phone cannot boot.
The worst is flash back a stock rom unless you remember your firmware version then you can flash philz kernel
Philz kernel/stock rom
Rosli59564 said:
As far as i remember there is no franco kernel for jb 4.1.2. That's why your phone cannot boot.
The worst is flash back a stock rom unless you remember your firmware version then you can flash philz kernel
Click to expand...
Click to collapse
Ok, thanks for the help so far, I have been reading different threads about the stock rom and philz kernel,
I could not identify my stock rom, am wondering could you be knowing stock rom for the gt-i9220 if yes, please pass me the link where I can download it.
I wanted to try out that n if it does not help I can go for philz kernel.
tudeine said:
Ok, thanks for the help so far, I have been reading different threads about the stock rom and philz kernel,
I could not identify my stock rom, am wondering could you be knowing stock rom for the gt-i9220 if yes, please pass me the link where I can download it.
I wanted to try out that n if it does not help I can go for philz kernel.
Click to expand...
Click to collapse
try flashing any of the JB version of Philz kernel like DDLSC using recovery of franco kernel. You should be able to get into CWM recovery,
power failure
nokiamodeln91 said:
try flashing any of the JB version of Philz kernel like DDLSC using recovery of franco kernel. You should be able to get into CWM recovery,
Click to expand...
Click to collapse
I guess ma problems are too many, after downloading philz kernel and transferring it to an external memory card, I cannot get into the recovery mode which I were able to get to 2 days back.
I did not do anything else from the day I was trying to root and things back fired, I thought the battery had been used up but even after charging I get nothing apart from the phone being warm, when I insert the charger all I see is a battery with a circle that flashes and disappears, flashes and disappears.
Any ideas or this marks the end of this gadget
Download mode? If yes then you can flash a rom using Odin or flash Philz kernel also using Odin.. If no.., you may need to try a charged battery.
Black screen
nokiamodeln91 said:
Download mode? If yes then you can flash a rom using Odin or flash Philz kernel also using Odin.. If no.., you may need to try a charged battery.
Click to expand...
Click to collapse
I guess I have to look for a charged battery, odin cannot read the phone, however I would like to know when I unzip philz kernel folder, there are other files and I understand odin(never used it before) has options like partition,auto reboot, F.time, Boot loader,PDA, phone, csc
I need to know which ones should I select, and if am using PDA which file from extracted philz kernel do I select.
tudeine said:
I guess I have to look for a charged battery, odin cannot read the phone, however I would like to know when I unzip philz kernel folder, there are other files and I understand odin(never used it before) has options like partition,auto reboot, F.time, Boot loader,PDA, phone, csc
I need to know which ones should I select, and if am using PDA which file from extracted philz kernel do I select.
Click to expand...
Click to collapse
For flashing Philz kernel using odin you need to use .tar file instead of .zip file. Also no need to extract anything from .tar file. Leave everything in odin as it is and put the .tar file in PDA section, if at all odin can detect your phone. remember, this needs to be performed in download mode.
I made it
treacherous_hawk said:
For flashing Philz kernel using odin you need to use .tar file instead of .zip file. Also no need to extract anything from .tar file. Leave everything in odin as it is and put the .tar file in PDA section, if at all odin can detect your phone. remember, this needs to be performed in download mode.
Click to expand...
Click to collapse
Thanx so much man, thanks a bunch, I can say the phone is up and running, however, everything is in Chinese, I do not Chinese, I cannot tell what the words mean, but all I know the philz kernel procedure using odin has worked.
now I need help to change the language, did I download the wrong kernel,
this is what I used: PhilZ-cwm6-DDLSC-ODD-4.93.6.tar,md5
Another problem I have observed, when you switch on the device it brings a yellow triangle with an exclamation mark in the middle
tudeine said:
Thanx so much man, thanks a bunch, I can say the phone is up and running, however, everything is in Chinese, I do not Chinese, I cannot tell what the words mean, but all I know the philz kernel procedure using odin has worked.
now I need help to change the language, did I download the wrong kernel,
this is what I used: PhilZ-cwm6-DDLSC-ODD-4.93.6.tar,md5
Another problem I have observed, when you switch on the device it brings a yellow triangle with an exclamation mark in the middle
Click to expand...
Click to collapse
Do you mean everything is in chinese in recovery or it boots up to home screen and there everything is chinese? You can leave the yellow triangle alone, first get it working once it does you can use triangle away app from xda or play store to remove it.
Sent from my GT-N7000 using Tapatalk
working
treacherous_hawk said:
Do you mean everything is in chinese in recovery or it boots up to home screen and there everything is chinese? You can leave the yellow triangle alone, first get it working once it does you can use triangle away app from xda or play store to remove it.
Sent from my GT-N7000 using Tapatalk[/QUOTE
What I meant, the phone boots up to home screen but everything was in Chinese, however, I managed to change the language to English, now the phone is working I can receive and make calls,browse, I have the supersu icon (I do not know what it does) on my home screen and some icons are in Chinese, I still don't have play store, and I still have the yellow triangle.
Below are my phone details now:
model nmbr: GT-N7000
android version:4.1.2
baseband: I92220ZCLSG
KERNAL VERSION: 3.0.31-906407
BUILD NUMBER: JZO54K.I9220ZCLSG
DO I HAVE TO CHANGE, OR THIS IS OK
Thanx so much mean while atleast its now up and running
Click to expand...
Click to collapse
I think the Chinese version didn't have playstore and all. You may need to flash a rom of n7000 to get all the access..
Hi XDA members,
so heres the deal.
I have a GT-N7000, I got it from a friend, but it was soft bricked. with the kies emergency error.
i tried to do the emergency recovery with kies, but it said "GT-N7000 does not support initializing".
SO my next thought was Odin. ive downloaded about 3 or 4 firmware files. flashed them and i get stuck at the "SAMSUNG GALAXY NOTE GT-N7000" screen everytime.
i dont know what firmware it was on, and since it wont boot the only information i can provide is whats on the sticker under the battery.
idk if it was rooted, or on jb/ics/gb or custom rom. idk about the kernel. please someone help me fix this ill provide any information i can. :good: :highfive:
Is flash successful? Have you tried flashing Philz kernel through odin? Then try getting into recovery.
nokiamodeln91 said:
Is flash successful? Have you tried flashing Philz kernel through odin? Then try getting into recovery.
Click to expand...
Click to collapse
yeah the jellybean stock flashed successfully, the ics didnt. it failed during the FSFactory.
i think this is the emmc brick but i cant find a gingerbread rom to flash from odin
Flash Philz kernel and try to get into recovery.
nokiamodeln91 said:
Flash Philz kernel and try to get into recovery.
Click to expand...
Click to collapse
i tried philz , odin just gets stuck when trying to flash it
Hi Im trying to help out a friend whos note 4 SM N910T keeps booting in recovery mode. There is no possible way to flash another rom to fix it without the use of Odin but for some reason I cant find a ROM in .tar format to flash it.
Any help with this? Thanks
TempezT said:
Hi Im trying to help out a friend whos note 4 SM N910T keeps booting in recovery mode. There is no possible way to flash another rom to fix it without the use of Odin but for some reason I cant find a ROM in .tar format to flash it.
Any help with this? Thanks
Click to expand...
Click to collapse
Flash twrp recovery in odin and flash any n910t rom from twrp.
Trex888 said:
Flash twrp recovery in odin and flash any n910t rom from twrp.
Click to expand...
Click to collapse
Hi ,my note 4 boots on twrp only but for some reason will not mount internal xd,system,data anything I canot flash anything from withing phone, I try flashing stock with odin but something since to went run I can sure use a rom tar to give it a shot.
androidtv11 said:
Hi ,my note 4 boots on twrp only but for some reason will not mount internal xd,system,data anything I canot flash anything from withing phone, I try flashing stock with odin but something since to went run I can sure use a rom tar to give it a shot.
Click to expand...
Click to collapse
You cannot flash custom rom in odin even if it's in tar format.
Check twrp version should be latest and must be for your particular model.
Make wipe first before flashing any rom to avoid and errors.
Trex888 said:
You cannot flash custom rom in odin even if it's in tar format.
Check twrp version should be latest and must be for your particular model.
Make wipe first before flashing any rom to avoid and errors.
Click to expand...
Click to collapse
Thanks will try that.
Trex888 said:
You cannot flash custom rom in odin even if it's in tar format.
Check twrp version should be latest and must be for your particular model.
Make wipe first before flashing any rom to avoid and errors.
Click to expand...
Click to collapse
This is whats been happening.
androidtv11 said:
This is whats been happening.
Click to expand...
Click to collapse
You have emmc read fail if you see at the top in download mode.
You might look at link below could help.
https://forum.xda-developers.com/note-4-tmobile/general/ddi-mmcread-failed-boot-error-fix-t3434335
Trex888 said:
You have emmc read fail if you see at the top in download mode.
You might look at link below could help.
https://forum.xda-developers.com/note-4-tmobile/general/ddi-mmcread-failed-boot-error-fix-t3434335
Click to expand...
Click to collapse
Thank for the help.