ok guy, i just got my milestone today..(milestone 1).. so i already root with z4root 1.3 and success. the problem is, i cant enter te recovery mode... i already turn of the phone, then turn on while holding the x button and release it when see motorola.. then hold camera and volume up button... but the screen didnt change, it stuck at screen with triangle and ! symbol screen....
can someone help me since i really want to load custom rom into my milestone...
problem solved, i just need to hold volume up button first then press camera button after triangle symbol... can not hold simultaneously
I can't go to recovery mode via press vol up+home+power
it's showing error message on screen RAMDUMP MODE,Cause:Force Upload
anybody help me?
Thank you,
Sent from my GT-P7300 using xda premium
somboons said:
I can't go to recovery mode via press vol up+home+power
it's showing error message on screen RAMDUMP MODE,Cause:Force Upload
anybody ,can help me?
Sent from my GT-P7300 using xda premium
Click to expand...
Click to collapse
press volume+ and power only------2 buttons release the butons after 3 sec when you see samsung logo.
giving you a big thank
thank you very much
lol even i had the same problem cause i was used to sgs i9003
Can Someone post a video or anything about this i have tried so much but cant reach the recovery mode ... i hold the 2 buttons and after seeing the samsung logo i wait 3 secs and stop holding them then wen i see the android logo i press the the menu button once and after some seconds the phone restarts with the samsung logo and then the normals boot cycle.
naseer97 said:
Can Someone post a video or anything about this i have tried so much but cant reach the recovery mode ... i hold the 2 buttons and after seeing the samsung logo i wait 3 secs and stop holding them then wen i see the android logo i press the the menu button once and after some seconds the phone restarts with the samsung logo and then the normals boot cycle.
Click to expand...
Click to collapse
1. Power off device (pull batt)
2. Press and hold Vol+ button
3. Press and hold Power button
4. Release Power as soon as the big Samsung Galaxy S logo appears
5. Release Vol+ as soon as the recovery menu appears
This always works. Did you install Faemod?
If you are getting into Ramdump Mode you must be holding the Home button too...
For all this: please use the Q&A thread or CWM recovery thread for questions. Do not open new topics, they pollute the forums. And also definitely read the wiki, this is all explained in there...
how to get of ram dump mode
nikagl said:
1. Power off device (pull batt)
2. Press and hold Vol+ button
3. Press and hold Power button
4. Release Power as soon as the big Samsung Galaxy S logo appears
5. Release Vol+ as soon as the recovery menu appears
This always works. Did you install Faemod?
If you are getting into Ramdump Mode you must be holding the Home button too...
For all this: please use the Q&A thread or CWM recovery thread for questions. Do not open new topics, they pollute the forums. And also definitely read the wiki, this is all explained in there...
Click to expand...
Click to collapse
i tried evrythng its not hapning...please help me out...if i press jus vol+ button and power button thn 1 cell icon error sign and comp icon is being shown
dhawal123 said:
i tried evrythng its not hapning...please help me out...if i press jus vol+ button and power button thn 1 cell icon error sign and comp icon is being shown
Click to expand...
Click to collapse
Then you have not installed any recovery. Please refer to the noobguide and continue there:
http://forum.xda-developers.com/showthread.php?t=1578821
Make sure to read the sections about installing a recovery...
error in upgarde
nikagl said:
Then you have not installed any recovery. Please refer to the noobguide and continue there:
http://forum.xda-developers.com/showthread.php?t=1578821
Make sure to read the sections about installing a recovery...
Click to expand...
Click to collapse
i was upgrading my firmware for i9001 through kies but it got stuck and i had to unplug it after that i am just getting ""PHONE--ERROR SIGN--COMPUTER SIGN""
what should i do??
please help...
dhawal123 said:
i was upgrading my firmware for i9001 through kies but it got stuck and i had to unplug it after that i am just getting ""PHONE--ERROR SIGN--COMPUTER SIGN""
what should i do??
please help...
Click to expand...
Click to collapse
That all depends on whether you want to continue "the legal way" or fix it yourself using stuff you find here. When a Kies upgrade fails I would go to the reseller where you bought the device to get it fixed. If you really want to do it yourself for whatever reason, find yourself a new ROM that belongs to your device (what was you ROM version before you started the upgrade?) and install it through ODIN. That will fix it...
Regards,
Nika.
stuck clockrecovery-ramdump mode in downloading mode
Hello, i install clockwork mode(Samsung galaxy s plus) and then when i reboot my phone i go again to clockwork recovery mode, i am trying to fix it with downloading mode but the screen writes RAMDUPT MODE cause:Force upload.
Can you please tell me what can i do to fix my phone?
nakos13 said:
Hello, i install clockwork mode(Samsung galaxy s plus) and then when i reboot my phone i go again to clockwork recovery mode, i am trying to fix it with downloading mode but the screen writes RAMDUPT MODE cause:Force upload.
Can you please tell me what can i do to fix my phone?
Click to expand...
Click to collapse
try pressing volume+power (2 button) release the buttons after 3 sec when you see samsung logo.
RESOLVED:-http://forum.xda-developers.com/showthread.php?t=1905675&page=2 or here http://forum.xda-developers.com/showthread.php?p=30415128#post30415128
xsenman said:
try pressing volume+power (2 button) release the buttons after 3 sec when you see samsung logo.
Click to expand...
Click to collapse
steel nothing.i press up and power button.I wait 3 seconds after the samsung logo appears and then the screen go again to clockrecovery mode.
When i get on the battery the phone start automatically and go to the recovery clockwork menu!so i prees in the recovery up and power but nothing
This is where I am
nikagl said:
That all depends on whether you want to continue "the legal way" or fix it yourself using stuff you find here. When a Kies upgrade fails I would go to the reseller where you bought the device to get it fixed. If you really want to do it yourself for whatever reason, find yourself a new ROM that belongs to your device (what was you ROM version before you started the upgrade?) and install it through ODIN. That will fix it...
Regards,
Nika.
Click to expand...
Click to collapse
All right.
It all started when I was going to download new firmware via Kies. Got stuck at 3%, tried recovering firmware through kies, still stuck at 3%. Tried another computer with recovery code. Didn't work at all. Called Samsung support, they showed me the forced recovery but it still doesn't work. When I do the [Vol+]+[Power]+[Home] (which is what Samsung support told me) it shows "RAMDUMP MODE,Cause:Force Upload". When I do the [Vol+]+[Power]-combo it goes into the [Phone--Exclamation Mark--Computer]-sing (Does that sign have a name? Like BSOD or RROD?).
So now I'm at the same crossroad as the last guy.
No matter what button-combinations I use I end up stuck (One time, don't know what buttons I pressed. It showed the Android-bot with the text "Downloading... Don't turn off target" (or "Don't unplug device" don't remember). I think it must be because it was in the middle of a firmware upgrade when all of this started).
So my question is what do I do now?
I can't go the legal way because I can't find my receipt and the store say "Without a receipt we can't do nothing".
I can't go directly to Samsung support because they say "Oh we're not quite sure, go to the store".
I don't know if I can install a new ROM through Odin since I don't know what ROM I had before the firmware upgrade.
(I'm a noob, I'm the kind of guy who, as long as it works, don't know what ROM I have installed).
Anyhow, if anyone out there have any idea what I should do I'd be very thankful.
I've already clicked the thank you-button on all the helpful posts in this thread.
Bump
Please forgive me.
Bumping this thread since the life of my phone is at stake.
Some one of you guys has to know how to fix this?
Finbel said:
Please forgive me.
Bumping this thread since the life of my phone is at stake.
Some one of you guys has to know how to fix this?
Click to expand...
Click to collapse
look in My Android Solutions
Please turn off your phone and wait until it is completely shut down
Press please the power + the volume up button for 10 seconds
When you see a Box with an android icon press once the menu button to be able to use it
:good::good::good:
can't get rid of RAMDUMP MODE
nikagl said:
That all depends on whether you want to continue "the legal way" or fix it yourself using stuff you find here. When a Kies upgrade fails I would go to the reseller where you bought the device to get it fixed. If you really want to do it yourself for whatever reason, find yourself a new ROM that belongs to your device (what was you ROM version before you started the upgrade?) and install it through ODIN. That will fix it...
Regards,
Nika.
Click to expand...
Click to collapse
I did evry thing but it display same screen How can I get rid of that can any one help me
My phone look like RAMDUMP ARM9 MODE
mbba67 said:
press volume+ and power only------2 buttons release the butons after 3 sec when you see samsung logo.
Click to expand...
Click to collapse
My phone look likes crashed again. RAMDUMP ARM9 MODE
what to do when i press the power button is showing RAMDUMP ARM9 MOD
QCSBL_FLASH.c LINE=0
Format:
qxdm message ;
-----------------------------------------------------------------------------FSA INFO--------------------------------------------------------------------------------------
---------------------------------------------------------------------
CONT=0X1F
intl1 =0*00 int2 = 0*00
dtype1 =0*00dtype2 = 0*00
manual1 =0*00 manual2 = 0*00
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------
##########################################
what to do help me
please
mnksngh706 said:
My phone look likes crashed again. RAMDUMP ARM9 MODE
what to do when i press the power button is showing RAMDUMP ARM9 MOD
QCSBL_FLASH.c LINE=0
Format:
qxdm message ;
-----------------------------------------------------------------------------FSA INFO--------------------------------------------------------------------------------------
---------------------------------------------------------------------
CONT=0X1F
intl1 =0*00 int2 = 0*00
dtype1 =0*00dtype2 = 0*00
manual1 =0*00 manual2 = 0*00
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------
##########################################
what to do help me
please
Click to expand...
Click to collapse
Try volume - and power, see if you get download mode??/
My phone is AT & T MB886 with native JB. I could access the black screen with blue letters, I made the recovery, clearing cache, etc etc etc, will not start, see the initial logo motorola and then the screen stays black. how I can reinstall the operating system android jb?? can be done from the SD?? as I do?? before I pass this problem had the phone rooted. The problem appeared after doing a factory restore on the phone tonces not start and I am the black screen with very little light.
Easy fix dude!
Follow these steps to put your device into fastboot.
(1. Turn off your phone.
(2. Hold vol up + vol down, immediately.
(3. Use vol down to quickly scroll to "ap fastboot."
(4. Press vol up.
(5. Connect usb to the pc.
(6. follow this tutorial by Huatz84.
Good luck dude.
OK!!!
Codex01 said:
Easy fix dude!
Follow these steps to put your device into fastboot.
(1. Turn off your phone.
(2. Hold vol up + vol down, immediately.
(3. Use vol down to quickly scroll to "ap fastboot."
(4. Press vol up.
(5. Connect usb to the pc.
(6. follow this tutorial by Huatz84.
Good luck dude.
Click to expand...
Click to collapse
sorry for my English, I'm from Argentina. After three attempts I managed to install android, it works fine, no problems, and is the same as it was before. This same process can install any other ROM?? you could tell me what to do to transfer to SD memory phone memory or install applications on the SD??
So as title suggest, having hard time accessing the recovery. Cannot into it. So, if you guys dont mind, post here the right combo and sequence, how to access the recovery. I have managed it before, even writen down how its supposed to be done, but doesnt work for me now anymore, the way it used.
// EDIT
And just when i bothered to make this topic, i found how it actually works, by trial and error.
Into BOOTLOADER: Press and hold POWER, then press and hold VOL DOWN, once the logo appears, let go off the POWER, but keep pressing the VOL DOWN until till the bootloader appears.
Past the DEAD DROID, into RECOVERY: Press both POWER and VOL UP, until the recovery meny appears.
My phone was frozen when I was taking a video,
then I forced restart the phone by pressing power button until it restarted.
However, my phone stuck at the android logo for a quite long time with the screen on, so I decided to do a factory reset.
I have tried the following steps on my friend's phone as we bought exactly same phone,
and succeded at first attempt.
1, volume down + power button goes into boot options.
2, then android logo, then about 2 seconds later, dead android guy would appear.
HERE is my phone's problem:
in this step after showing android logo, my phone would vibrate once and then just gone black,just like turning off. NO DEAD ANDROID GUY showed up. Certainly would not be able to do the rest steps.
I have searched and tried so many methods that others used when they could not get into the bootloader. NONE of them succeded.
So I need help, guys.
Anyone got any ideas.
Thanks in advanced !!!
no one ?
I guess I had to bring it to the store for repairing.
bluecard said:
no one ?
I guess I had to bring it to the store for repairing.
Click to expand...
Click to collapse
1. power button + volume(down) button
then in bootloader menu:
2. volume(down) button to goto down to 'recovery'
3. volume(up) button for selecting it
Alternative I would try this:
power button + volume(down) button
then in bootloader menu stay here connect usb and use fastboot on pc.
fastboot flashall factoryImage ????
bitstra said:
1. power button + volume(down) button
then in bootloader menu:
2. volume(down) button to goto down to 'recovery'
3. volume(up) button for selecting it
Alternative I would try this:
power button + volume(down) button
then in bootloader menu stay here connect usb and use fastboot on pc.
fastboot flashall factoryImage ????
Click to expand...
Click to collapse
post in right forum........... see my signature for 5.0.2 easy installer or search for my kitkat version in xt1068 forum