Hey guys, I am currently running rooted stock 4.4.2. This morning I got an OTA notification. I tried searching for info on it but I can't find anything except the April update. Anyone else got info on this update?
Nothing for me, im on NE3 4.4.2 kitkat
Sent from my SAMSUNG-SGH-I537 using XDA Premium 4 mobile app
thewarhawk said:
Hey guys, I am currently running rooted stock 4.4.2. This morning I got an OTA notification. I tried searching for info on it but I can't find anything except the April update. Anyone else got info on this update?
Click to expand...
Click to collapse
What firmware are you currently on? You might want to check out the i537 Firmware Thread.
Devo7v said:
What firmware are you currently on? You might want to check out the i537 Firmware Thread.
Click to expand...
Click to collapse
You're right, I'm a build behind, I guess it was such a minor update there wasn't much news about it. My bad, thanks for the info.
Related
I have AT&T and just wanted to make sure, the newest firmware that came out I am able to use towelroot again right?
So if I wanted to update to the new firmware with the fingerprint scanner improvements etc
I would have to unroot my phone, try to do the OTA? Is there any other way I can do this? I remember I renamed some files to try and stop updates but don't remember exactly where.
Is there an alternative way of doing it? can someone explain the steps I need to do? and what if I do a nandroid backup through safestrap, can I use this same back up with the new firmware or would I have to start over from scratch?
I can't live without root, I like using on screen buttons on my S5
What firmware version are you currently on? Both the original ANCE and the AND3 OTA can be rooted. Haven't seen anything yet about something newer than AND3.
LoSt180 said:
What firmware version are you currently on? Both the original ANCE and the AND3 OTA can be rooted. Haven't seen anything yet about something newer than AND3.
Click to expand...
Click to collapse
Build number KOT49H. G900AUC2AND3
so it's safe to update with the newer firmware from AT&T?
btort1 said:
Build number KOT49H. G900AUC2AND3
so it's safe to update with the newer firmware from AT&T?
Click to expand...
Click to collapse
You already have the newest firmware available from AT&T and yes you can root that. If you start getting update notifications then I would hold off on those until someone can verify if root is achievable. So far AT&T has pushed out an update newer than what you already have.
If they have pushed out a newer update what's the numbers on it. I haven't been on xda since rooting my S5 and was wondering if we can safely update and keep root.
Sent from my "ROOTED" SAMSUNG-SM-G900A using XDA Premium 4 mobile app
PS4AndroidHacker said:
If they have pushed out a newer update what's the numbers on it. I haven't been on xda since rooting my S5 and was wondering if we can safely update and keep root.
Sent from my "ROOTED" SAMSUNG-SM-G900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
AT&T hasn't released it yet
I just get it 17.05 MB update on my Note 3. Now software is 4.4.4 DNL3. Anybody else ? Did anybody know what update is about? 100% stock firmware here.
Post a pic of the build please
Here is a screenshot
You said DNL3. We already had DNL1. I thought there was another update on top of the one already sent
norbarb said:
I just get it 17.05 MB update on my Note 3. Now software is 4.4.4 DNL3. Anybody else ? Did anybody know what update is about? 100% stock firmware here.
Click to expand...
Click to collapse
no update here
http://www.att.com/esupport/article.jsp?sid=KB423151&cv=820&_requestid=7953482#fbid=bnOJqOpizUO
carl1961 said:
no update here
http://www.att.com/esupport/article.jsp?sid=KB423151&cv=820&_requestid=7953482#fbid=bnOJqOpizUO
Click to expand...
Click to collapse
I'm sorry this is old update. I miss spell . It is DNL1. Phone is use by my wife and I did not follow this forum.
Sent from my SAMSUNG-SM-N910A using XDA Premium HD app
I received the same update and my info looks the same as posted.
What was the update? It was just a few days ago, I already had the 4.4.4.
I looked at a different site and found out it was an update to the 4.4.4
They even had a link to the AT&T site to show what it updated.
norbarb said:
I just get it 17.05 MB update on my Note 3. Now software is 4.4.4 DNL3. Anybody else ? Did anybody know what update is about? 100% stock firmware here.
Click to expand...
Click to collapse
I think it was a security update
Hi I own a note 4 N910CXXU1ANL3 and I'm not receiving the lollipop ota update. I'm still on 4.4.4 and when I check for update it says latest version already installed.
What to do, considering lollipop has been pushed to all other versions as per my knowledge.
Tnx in advance!
Sent from my SM-N910C using Tapatalk
Lollipop sucks anyway, so ...
Cryss said:
Lollipop sucks anyway, so ...
Click to expand...
Click to collapse
+1
I turned ota off so I wont get it. KK is fine until Lollipoop is sorted or we get M, yeah right.
You can download it from here http://www.sammobile.com/firmwares/database/SM-N910C/ and flash it with odin.
Hello there was a new firmware update posted on Sam Mobile for the SM-9208 Taiwan today (N9208ZZT2AOK2). Has anyone updated to it yet? If so do you notice any difference and if are you still rooted.
Yeah, just noticed this update on Samobile but have not flashed yet. It is new firmware dated at 09/11. Wonder what are the changes.......
Sent from my SM-N9208 using Tapatalk
Just got the update pushed to me, didn't even look what was new, sorry.
are any of you who took the new SM-N9208 update rooted? or were you able to root after the update? thanks for taking time to respond to my question.
cortez.i said:
are any of you who took the new SM-N9208 update rooted? or were you able to root after the update? thanks for taking time to respond to my question.
Click to expand...
Click to collapse
If you're rooted it won't update OTA. I used ODIN to upgrade to K2 and I've experienced no problems.
Detroitking02 said:
If you're rooted it won't update OTA. I used ODIN to upgrade to K2 and I've experienced no problems.
Click to expand...
Click to collapse
Agreed. That's the plan. I meant to ask if you're able to re-root after taking the update, using one of the root kernels. (Was posting my question in a hurry as I was going through TSA Checkpoint).
Sent from my SM-N9208
cortez.i said:
Agreed. That's the plan. I meant to ask if you're able to re-root after taking the update, using one of the root kernels. (Was posting my question in a hurry as I was going through TSA Checkpoint).
Sent from my SM-N9208
Click to expand...
Click to collapse
yap you can re-root after flashing it in odin, there is no problem in it and no major changes found in ok2 other than a few little ones
ravian29 said:
yap you can re-root after flashing it in odin, there is no problem in it and no major changes found in ok2 other than a few little ones
Click to expand...
Click to collapse
confirmed. flashed and rerooted w/o issue. only noticeable difference was the "Android Upgrading Screen" it's now full screen and similar to the one on my T-Mo Note 5 w/MM. @ravian29 - thanks for your reply as well.
Detroitking02 said:
Hello there was a new firmware update posted on Sam Mobile for the SM-9208 Taiwan today (N9208ZZT2AOK2). Has anyone updated to it yet? If so do you notice any difference and if are you still rooted.
Click to expand...
Click to collapse
you can go there to download
As usual xda members ... Flash this using Odin ... im currently having issues with my dropbox account, So if somebody can get it uploaded to android file host please do ...
AP_ATT_G920AATT4CPG1_CL7368506_QB10212583_REV02_user_low_ship.tar.md5
BL_G920AUCS4CPG1_CL7368506_QB10212583_REV02_user_low_ship.tar.md5
CP_G920AUCS4CPG1_CL7368506_QB10212583_REV02_user_low_ship.tar.md5
CSC_ATT_G920AATT4CPG1_CL7368506_QB10212583_REV02_user_low_ship.tar.md5
https://drive.google.com/open?id=0B-fzI2nnMvViQ3h6ZnREU1BKbEE
Thanks Jusemejose,
and thanked.
Thank you!!
Sent from my Andromax I56D2G using Tapatalk
Has anyone Flashed yet?
loustu said:
Has anyone Flashed yet?
Click to expand...
Click to collapse
Just finished flashing and restoring. So far so good. Anyone have a changelog for this update?
I'm currently on PD6. Can I flash this on top of that via odin or are there incremental updates I need to do prior to this? Thanks for the guidance!
Sent from my SAMSUNG-SM-G920A using XDA Premium 4 mobile app
destrorox said:
I'm currently on PD6. Can I flash this on top of that via odin or are there incremental updates I need to do prior to this? Thanks for the guidance!
Sent from my SAMSUNG-SM-G920A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I flashed PF1 over PD6 on my G920AZ. Should be fine.
Question about updating
Hi, first post on xda.
My phone is an AT&T version but I live in AU, and I want to update it to marshmallow from what it is currently on (5.1.1), and it won't update since I'm not in the U.S.
It's currently on AUCU3BO12.
Can I flash this PG1 without upgrading to anything else first? Can it go from 5.1.1 to 6.0.1 directly from BO12? (According to AT&T's website, BO12 is a bit down the line in terms of updates, there have been a number since).
Edit: Also, which .tar file do I use out of the 4?
Thanks!
Does anyone know the answer to the above?
Finally unbricked my G920 Samsung Galaxy S6 with this
Thank you so much for this. I bricked my phone by stupidly flashing a 5.1 firmware and i've been scrambling to fix it for about a week now. And I couldn't find these files anywhere. Thank you so much
megalucario1900 said:
Thank you so much for this. I bricked my phone by stupidly flashing a 5.1 firmware and i've been scrambling to fix it for about a week now. And I couldn't find these files anywhere. Thank you so much
Click to expand...
Click to collapse
So your phone was on 5.1 and you went straight to 6.0.1 with this? No intermediate updates?
bro i have sameboi2 do u upgraded to marshmallow help ?
---------- Post added at 02:41 PM ---------- Previous post was at 02:36 PM ----------
My phone is an AT&T S6 and I want to update it to marshmallow from what it is currently on (5.1.1), and it won't update since I'm not in the U.S.
It's currently on AUCU3BO12.
Can I flash this PG1 without upgrading to anything else first? Can it go from 5.1.1 to 6.0.1 directly from BO12? (According to AT&T's website, BO12 is a bit down the line in terms of updates, there have been a number since).
Edit: Also, which .tar file do I use out of the 4?
oo0spyder0oo said:
Hi, first post on xda.
My phone is an AT&T version but I live in AU, and I want to update it to marshmallow from what it is currently on (5.1.1), and it won't update since I'm not in the U.S.
It's currently on AUCU3BO12.
Can I flash this PG1 without upgrading to anything else first? Can it go from 5.1.1 to 6.0.1 directly from BO12? (According to AT&T's website, BO12 is a bit down the line in terms of updates, there have been a number since).
Edit: Also, which .tar file do I use out of the 4?
Thanks!
Click to expand...
Click to collapse
Same question... Have you tried?
codei5503 said:
Same question... Have you tried?
Click to expand...
Click to collapse
Nope, haven't risked anything going wrong
is it possible
I am currently running G920AUCU1AOE2 (5.0.2). can i update straight to this version?
TechShopGlobal said:
I am currently running G920AUCU1AOE2 (5.0.2). can i update straight to this version?
Click to expand...
Click to collapse
same question ...
can we go straight to PG1 from G920AUCU1AOE2 (5.0.2) ?
TechShopGlobal said:
I am currently running G920AUCU1AOE2 (5.0.2). can i update straight to this version?
Click to expand...
Click to collapse
I just have updated my s6 from G920AUCU1AOE2 (5.0.2) to this version without any proplems :good:
ahmede90 said:
I just have updated my s6 from G920AUCU1AOE2 (5.0.2) to this version without any proplems :good:
Click to expand...
Click to collapse
Flashed on mine (BOI2, 5.1.1) and it's stuck in the samsung galaxy s6 powered by android screen.
Already restarted to recovery and wiped cache partition and factory reset from there. Still stuck in boot screen...
Any help?
EDIT: Flashed all 4 files this time and it worked. Only flashed the AP file the first time (which people all over the internet say you only need to do) but I had to flash all 4 and now it works. Thank you!
How to flash this os into my S6 without bricking my device ??
hashim_ayyub said:
How to flash this os into my S6 without bricking my device ??
Click to expand...
Click to collapse
You just need to load all 4 files up in Odin (AP, BL etc.) and click start.
Make sure your phone is in download mode.