Database Develop

[Q] m7 weird brick need help

Hi guys .last month weird thing happen
My m7 lose signal then i restarted the phOne suddenly bricked ..
the problem
Stuck on bootloop
Lost my access to recovery
RUU not stocking but not showing any error (RUU.exe)
I think its because the kernel i have instaled (elementarX 14)
I think sumting wrong with emmc or mid (pn071****)
My rom arhd62
Cid-11111111
Hboot-1.44.0000
Baseband-4a.14.3250.13
eMMC-boot
M7_ul s-off
Modelid n071
I searched all over the place ..need help ppl

Can u try reflashing recovery through fastboot? Sometines the kernel if flashed improperly can wipe recovery partition and it needs to be reflashed....reflash recovery through fastboot and reflash with fastboot flash recovery yourrecoveryname.img
Sent from my HTCONE using Tapatalk

knockratos said:
Hi guys .last month weird thing happen
My m7 lose signal then i restarted the phOne suddenly bricked ..
the problem
Stuck on bootloop
Lost my access to recovery
RUU not stocking but not showing any error (RUU.exe)
I think its because the kernel i have instaled (elementarX 14)
My rom arhd62
Cid-11111111
Hboot-1.44.0000
Baseband-4a.14.3250.13
eMMC-boot
M7_ul s-off
Modelid n071
I searched all over the place ..need help ppl
Click to expand...
Click to collapse
Post the output of fastboot getvar all except IMEI and S/N.
have you tried to flash your recovery + erase cache?

alray said:
Post the output of fastboot getvar all except IMEI and S/N.
have you tried to flash your recovery + erase cache?
Click to expand...
Click to collapse
I alredy did that ..
i try reflash the twrp then the rom.zip the zip say error not enough space
i try to erase system and stuff failed too

knockratos said:
I alredy did that ..
i try reflash the twrp then the rom.zip the zip say error not enough space
i try to erase system and stuff failed too
Click to expand...
Click to collapse
fastboot getvar all

alray said:
fastboot getvar all
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN071****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4241mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.092s

knockratos said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN071****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4241mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.092s
Click to expand...
Click to collapse
What ruu are you trying to use? With s-off it should be quite easy to restore your phone...
did you modified your MID?

alray said:
What ruu are you trying to use? With s-off it should be quite easy to restore your phone...
did you modified your MID?
Click to expand...
Click to collapse
RUU m7 u jb 50 htc europe 1.29.401.2.r.radio 4a1432501310331150release311663signed24..
First time i bricked and it works ..after that i allways use nandroid ..but now doesnt work and i dont have acces to recovery

knockratos said:
RUU m7 u jb 50 htc europe 1.29.401.2.r.radio 4a1432501310331150release311663signed24..
First time i bricked and it works ..after that i allways use nandroid ..but now doesnt work and i dont have acces to recovery
Click to expand...
Click to collapse
So you are using a ruu.exe. What version of windows do you have? 7, 8 or 8.1?

alray said:
What ruu are you trying to use? With s-off it should be quite easy to restore your phone...
did you modified your MID?
Click to expand...
Click to collapse
knockratos said:
RUU m7 u jb 50 htc europe 1.29.401.2.r.radio 4a1432501310331150release311663signed24..
First time i bricked and it works ..after that i allways use nandroid ..but now doesnt work and i dont have acces to recovery
Click to expand...
Click to collapse
1- JTAG repair ? (thanks @scotty1223 )
2- you have a UL model it seems not a U
@alray link him the MID change tool (not the ENG method ) change mid to PN0710000 then he can go on with an m7_ul ruu... or whatever need to be done, good luck

mid change tool:
http://forum.xda-developers.com/showthread.php?t=2535365

nkk71 said:
1- JTAG repair ? (thanks @scotty1223 )
2- you have a UL model it seems not a U
@alray link him the MID change tool (not the ENG method ) change mid to PN0710000 then he can go on with an m7_ul ruu... or whatever need to be done, good luck
Click to expand...
Click to collapse
Windows 7
What is jtag repair
long time agO the RUU was working fine (the brick was only freeze on bootloop but whit recovery)
But now it REBOOTLOOP over and over and i lost access to recovery ..
The RUU do its job sucessfuly but not stocking (doing nothing)
I guess i didnt chage any mid
I have to change ? How ? And than what ?
Is it possibly that is kernel issue ?
Dont know what to do

knockratos said:
Windows 7
Dont know what to do
Click to expand...
Click to collapse
alray is helping you plenty, so return in kind by at least pressing his thanks button

nkk71 said:
alray is helping you plenty, so return in kind by at least pressing his thanks button
Click to expand...
Click to collapse
Done but im new in here ..

alray said:
mid change tool:
http://forum.xda-developers.com/showthread.php?t=2535365
Click to expand...
Click to collapse
How i can install the mid change if i dont have access to recovery?

alray said:
mid change tool:
http://forum.xda-developers.com/showthread.php?t=2535365
Click to expand...
Click to collapse
Hi tried using fastboot flash zip ..it says failed remote not allowed

knockratos said:
Hi tried using fastboot flash zip ..it says failed remote not allowed
Click to expand...
Click to collapse
download twrp 2.6.3.3 from here and save it to your adb/fastboot folder
check MD5 before flashing: 72067aefb69541d40e8420d7aa46408d
boot phone in bootloader mode and flash the recovery:
Code:
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootlader
then boot in recovery mode (TWRP main menu)
Download the MID change tool from here and save it to your adb/fastboot folder
check md5 value: ae54b6e28a925270661994dbe16eb742
push the tool:
Code:
adb push MID_Change_1.01.zip /sdcard/
in twrp, select ''install'' browse sdcard and select ''MID_Change_1.01.zip'' then ''swipe to confirm flash''.
The aroma installer will start:
select ''next'' at the ''welcome screen''
Thick the check box ''I agree with these Terms of Use'', then select ''next''
select ''next'' at the ''Credit and Support'' screen
at the CID Options screen, select ''PN0710000'' then select ''next''
at the ''ready to install'' screen, select ''install now''
wait for the mid tool to do its magic (few seconds) and select ''next''
at the ''Actions were successful'' screen, select ''Finish''
Now you are back in TWRP recovery
select ''back'' twice and then ''reboot'' and choose ''bootloader''
You are now back in bootloader mode
change your cid to match the RUU:
Code:
fastboot oem writecid HTC__001
fastboot reboot-bootloader
download the ruu from here
check md5: 9ad4111ce86981e3dffcce6d9ee80551
launch the ruu and follow instructions.
stay s-off and bootloader unlocked.

alray said:
download twrp 2.6.3.3 from here and save it to your adb/fastboot folder
check MD5 before flashing: 72067aefb69541d40e8420d7aa46408d
boot phone in bootloader mode and flash the recovery:
Code:
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootlader
Not working cant enter to recovery mode and it keeps reboot loop
I think if the recovery start work i will use my nandroid backup ..and the RUU wont be necessary i guess
How to check the md5 value ?? @alray I realy apreciate what u doing to help me .thnks ..
Click to expand...
Click to collapse

knockratos said:
Not working cant enter to recovery mode and it keeps reboot loop
Click to expand...
Click to collapse
You mean the phone bootloop when you are trying to enter recovery or it bootloop as soon you enter bootloader?
Try holding power + vol down until the phone boot in bootloader and stop looping
How to check the md5 value ??
Click to expand...
Click to collapse
check ''not so FAQ #1'' at the end of this post (from nkk71's guide)
or
http://lmgtfy.com/?q=how+do+i+check+md5+windows

alray said:
You mean the phone bootloop when you are trying to enter recovery or it bootloop as soon you enter bootloader?
Try holding power + vol down until the phone boot in bootloader and stop looping
check ''not so FAQ #1'' at the end of this post (from nkk71's guide)
or
http://lmgtfy.com/?q=how+do+i+check+md5+windows
Click to expand...
Click to collapse
It means that boot loop when i enter recovery mode or factory reset mode or turn on the phone( of course)
Keep boot over and over ..
But the bootloader is fine .

[HELP] Soft Brick M7wls

Okay, so yesterday I came into an HTC One that was on Sprint. I have an AT&T micro sim so naturally I went to work to root, s-off, etc. so I could Simunlock it. I did it all and then started to install a custom rom. Android 4.4.2 Kitkat. got stuck in a bootloop, went to wipe cache and accidentally wiped the whole system and everything pretty much.
I think something is wrong with the partitions. Maybe some corrupted data along the line with all my..mess ups.
I should've researched more before I delve into this and I'm getting a lot of knowledge out of this but it's not enough.
It would be highly appreciated if someone could help me out. I've read countless threads, tried to redo the RUU or something. Nothing to avail and I can't sideload because my adb won't work in cmd for some reason.
here's a lil info from the getvarall command from the All in One Kit exe:
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 1.00.20.1108
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: edit
imei: edit
meid: edit
product: m7_wls
platform: HBOOT-8064
modelid: PN0720000
cidnum: SPCS_001
battery-status: good
battery-voltage: 4317mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
If you need more info, just ask. I'll do all I can, but I'm pretty novice with this. *sigh*

OneLyfe said:
Okay, so yesterday I came into an HTC One that was on Sprint. I have an AT&T micro sim so naturally I went to work to root, s-off, etc. so I could Simunlock it. I did it all and then started to install a custom rom. Android 4.4.2 Kitkat. got stuck in a bootloop, went to wipe cache and accidentally wiped the whole system and everything pretty much.
I think something is wrong with the partitions. Maybe some corrupted data along the line with all my..mess ups.
I should've researched more before I delve into this and I'm getting a lot of knowledge out of this but it's not enough.
It would be highly appreciated if someone could help me out. I've read countless threads, tried to redo the RUU or something. Nothing to avail and I can't sideload because my adb won't work in cmd for some reason.
here's a lil info from the getvarall command from the All in One Kit exe:
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 1.00.20.1108
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: REMOVE
imei: REMOVE
meid:
product: m7_wls
platform: HBOOT-8064
modelid: PN0720000
cidnum: SPCS_001
battery-status: good
battery-voltage: 4317mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
If you need more info, just ask. I'll do all I can, but I'm pretty novice with this. *sigh*
Click to expand...
Click to collapse
First, please remove your IMEI and Serialno from your first post!
Follow the steps in this post, including the prerequisites.

OneLyfe said:
Okay, so yesterday I came into an HTC One that was on Sprint. I have an AT&T micro sim so naturally I went to work to root, s-off, etc. so I could Simunlock it. I did it all and then started to install a custom rom. Android 4.4.2 Kitkat. got stuck in a bootloop, went to wipe cache and accidentally wiped the whole system and everything pretty much.
I think something is wrong with the partitions. Maybe some corrupted data along the line with all my..mess ups.
I should've researched more before I delve into this and I'm getting a lot of knowledge out of this but it's not enough.
It would be highly appreciated if someone could help me out. I've read countless threads, tried to redo the RUU or something. Nothing to avail and I can't sideload because my adb won't work in cmd for some reason.
here's a lil info from the getvarall command from the All in One Kit exe:
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 1.00.20.1108
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno:
imei:
meid:
product: m7_wls
platform: HBOOT-8064
modelid: PN0720000
cidnum: SPCS_001
battery-status: good
battery-voltage: 4317mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0
If you need more info, just ask. I'll do all I can, but I'm pretty novice with this. *sigh*
Click to expand...
Click to collapse
dont post IMEI, MEID and SERIALNO
if you have used a toolkit from this forum, you probably have flashed an incompatible recovery and rom for a gsm variant (yours is cdma-sprint)
you'll have to flash a sprint (m7wls) recovery, format everything and then push and install a sprint rom
---------- Post added at 08:00 PM ---------- Previous post was at 07:57 PM ----------
majmoz said:
First, please remove your IMEI and Serialno from your first post!
Follow the steps in this post, including the prerequisites.
Click to expand...
Click to collapse
thanks for sharing this guide:good:, but this is for the M7_U and UL. OP can use the guide but must make sure to flash a M7WLS recovery, not that one linked in the guide.
+
he will need to wipe + format data from recovery. flashing the wrong recovery probably screwed is data partition.

alray said:
dont post IMEI, MEID and SERIALNO
if you have used a toolkit from this forum, you probably have flashed an incompatible recovery and rom for a gsm variant (yours is cdma-sprint)
you'll have to flash a sprint (m7wls) recovery, format everything and then push and install a sprint rom
---------- Post added at 08:00 PM ---------- Previous post was at 07:57 PM ----------
thanks for sharing this guide:good:, but this is for the M7_U and UL. OP can use the guide but must make sure to flash a M7WLS recovery, not that one linked in the guide.
+
he will need to wipe + format data from recovery. flashing the wrong recovery probably screwed is data partition.
Click to expand...
Click to collapse
I have TWRP 2.6.3.0 and as far as I know it's for M7wls. It won't let me mount cache or anything anymore. When I'm attempting to use adb the device won't show up on the list and I can't find it at all so I can't push roms over even with minimal adb and fastboot.
Is there something I'm missing?
I just miss having an OS so much.. lool

OneLyfe said:
I have TWRP 2.6.3.0 and as far as I know it's for M7wls. It won't let me mount cache or anything anymore. When I'm attempting to use adb the device won't show up on the list and I can't find it at all so I can't push roms over even with minimal adb and fastboot.
Is there something I'm missing?
I just miss having an OS so much.. lool
Click to expand...
Click to collapse
just to be sure flash this one: http://techerrata.com/file/twrp2/m7wls/openrecovery-twrp-2.6.3.0-m7wls.img
check md5 is good: b940a8e63bf1992b7a16546915c6bc7c
Code:
fastboot flash recovery openrecovery-twrp-2.6.3.0-m7wls.img
fastboot erase cache
fastboot reboot-bootloader
then boot in twrp and check if you have adb connection:
Code:
adb devices
if not, re-install the drivers correctly (refer to the guide)
if ok then, push a WLS rom:
wipe everything + format data then:
Code:
adb push rom.zip /sdcard/
and install the rom

alray said:
just to be sure flash this one:
check md5 is good: b940a8e63bf1992b7a16546915c6bc7c
Code:
fastboot flash recovery openrecovery-twrp-2.6.3.0-m7wls.img
fastboot erase cache
fastboot reboot-bootloader
then boot in twrp and check if you have adb connection:
Code:
adb devices
if not, re-install the drivers correctly (refer to the guide)
if ok then, push a WLS rom:
wipe everything + format data then:
Code:
adb push rom.zip /sdcard/
and install the rom
Click to expand...
Click to collapse
I can't get ADB to work for the life of me. I tried uninstalling HTC Sync, reinstalled drivers, then tried to install drivers in device manager.
Don't i have to have an OTG USB for adb to even work in cmd..?

OneLyfe said:
I can't get ADB to work for the life of me. I tried uninstalling HTC Sync, reinstalled drivers, then tried to install drivers in device manager.
Don't i have to have an OTG USB for adb to even work in cmd..?
Click to expand...
Click to collapse
Did fastboot work and did you install twrp 2.6.3.0 successfully? If yes, did you boot into recovery before checking ADB Devices? If no, then try booting into recovery and follow the steps @alray laid out for you. And no, you don't need a OTG cable to use adb commands you just need the USB cable attached to your computer and phone.

If you are stuck with a wiped system partition, then there is no android there for ADB to talk to. From the Bootloader, you need to use fastboot commands to flash a new recovery first. Are you in the bootloader? Do you have fastboot connectivity in the bootloader? Flashing a proper recovery suited to m7wls should fix your partitions and get you on the way to a successful rom flash.

1262
dougeedug said:
If you are stuck with a wiped system partition, then there is no android there for ADB to talk to. From the Bootloader, you need to use fastboot commands to flash a new recovery first. Are you in the bootloader? Do you have fastboot connectivity in the bootloader? Flashing a proper recovery suited to m7wls should fix your partitions and get you on the way to a successful rom flash.
Click to expand...
Click to collapse
Yes I wiped the system partition somehow in all of this. I have TWRP 2.6.3.0, I've tried from the recovery main menu like it says. Nothing.
adb devices comes up with no list.
adb usb says it cannot find it.
and fastboot works with recovery images, but it won't load a zip.
sooo it's probably my drivers or..?
cause adb is the only thing I need working to fix all of this, I believe. -__-

[Q] How do I get my phone operable again?

Hi Guys,
Sorry to start another thread like this, but I've read and tried everything I can find on here and nothing seems to be working, in fact I seem to have made things worse.
Long story short I did the whole HTC dev unlock thing and all was fine, then I installed TWRP and pushed SuperSU, after this my phone would boot up and run for about 1 minute then reboot and go through the same routine (I let this go on for a few hours before I gave up)
Since I have tried installing different ROMs and changed the Recovery several times but I am in a position where I can boot into recovery but nothing else, unfortunately I don't even seem to be able to install any ROMs any more, I just pushed ARHD to the phone but as soon as I try to install it TWRP comes back with a failed message.
I'm sure this situation must be recoverable as I can still access recovery and fastboot but I seem to be going round in circles at the moment and getting nowhere so any help or pointers would be greatly appreciated, if there is any specific information that you need then just ask.

dirkgently68 said:
Hi Guys,
Sorry to start another thread like this, but I've read and tried everything I can find on here and nothing seems to be working, in fact I seem to have made things worse.
Long story short I did the whole HTC dev unlock thing and all was fine, then I installed TWRP and pushed SuperSU, after this my phone would boot up and run for about 1 minute then reboot and go through the same routine (I let this go on for a few hours before I gave up)
Since I have tried installing different ROMs and changed the Recovery several times but I am in a position where I can boot into recovery but nothing else, unfortunately I don't even seem to be able to install any ROMs any more, I just pushed ARHD to the phone but as soon as I try to install it TWRP comes back with a failed message.
I'm sure this situation must be recoverable as I can still access recovery and fastboot but I seem to be going round in circles at the moment and getting nowhere so any help or pointers would be greatly appreciated, if there is any specific information that you need then just ask.
Click to expand...
Click to collapse
post the output of "fastboot getvar all' (exclude imei and serialno)
what recovery are you using? What version number?

dirkgently68 said:
Hi Guys,
Sorry to start another thread like this, but I've read and tried everything I can find on here and nothing seems to be working, in fact I seem to have made things worse.
Long story short I did the whole HTC dev unlock thing and all was fine, then I installed TWRP and pushed SuperSU, after this my phone would boot up and run for about 1 minute then reboot and go through the same routine (I let this go on for a few hours before I gave up)
Since I have tried installing different ROMs and changed the Recovery several times but I am in a position where I can boot into recovery but nothing else, unfortunately I don't even seem to be able to install any ROMs any more, I just pushed ARHD to the phone but as soon as I try to install it TWRP comes back with a failed message.
I'm sure this situation must be recoverable as I can still access recovery and fastboot but I seem to be going round in circles at the moment and getting nowhere so any help or pointers would be greatly appreciated, if there is any specific information that you need then just ask.
Click to expand...
Click to collapse
you'll most likely have to format data and push the file to the phone again. This will wipe the entire phone same as a RUU

alray said:
post the output of "fastboot getvar all' (exclude imei and serialno)
what recovery are you using? What version number?
Click to expand...
Click to collapse
Fastboot getvar all returns this :-
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.28.3218.04
version-cpld: None
version-microp: None
version-main: 6.12.161.8
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: VODAP001
battery-status: good
battery-voltage: 4315mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
Recovery is TWRP v2.8.0.2
Thanks for your response!

dirkgently68 said:
Fastboot getvar all returns this :-
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.28.3218.04
version-cpld: None
version-microp: None
version-main: 6.12.161.8
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: VODAP001
battery-status: good
battery-voltage: 4315mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
Recovery is TWRP v2.8.0.2
Thanks for your response!
Click to expand...
Click to collapse
Afaik ARHD must be installed using twrp 2.6.3.3 (higher versions of twrp are not compatible, or at least, they are not all compatible)
flash twrp 2.6.3.3
Code:
fastboot flash recovery name_of_recovery.img
fastboot erase cache
fastboot reboot-bootloader
then in twrp selsect "install", browse your phone storage to find your ARHD zip file, select it and then swipe to flash.
If this fail again, format data like cisa said above, but you'll have to push the rom to your phone storage again.

alray said:
Afaik ARHD must be installed using twrp 2.6.3.3 (higher versions of twrp are not compatible, or at least, they are not all compatible)
flash twrp 2.6.3.3
Code:
fastboot flash recovery name_of_recovery.img
fastboot erase cache
fastboot reboot-bootloader
then in twrp selsect "install", browse your phone storage to find your ARHD zip file, select it and then swipe to flash.
If this fail again, format data like cisa said above, but you'll have to push the rom to your phone storage again.
Click to expand...
Click to collapse
Installed TWRP from your link fine, tried to install ARHD which failed so from TWRP I did Wipe / Format Data and now everytime I try and push the rom back to the phone I get the message protocol failure after about 3 minutes or so.

dirkgently68 said:
Installed TWRP from your link fine, tried to install ARHD which failed so from TWRP I did Wipe / Format Data and now everytime I try and push the rom back to the phone I get the message protocol failure after about 3 minutes or so.
Click to expand...
Click to collapse
What was the error code in twrp?
What is your adb version?
Do you have latest HTC drivers installed?
Are you using a usb 2.0 ports? Maybe try another usb port/cable.
Have you checked MD5 value of your rom/recovery files?

dirkgently68 said:
Installed TWRP from your link fine, tried to install ARHD which failed so from TWRP I did Wipe / Format Data and now everytime I try and push the rom back to the phone I get the message protocol failure after about 3 minutes or so.
Click to expand...
Click to collapse
After you done wipe/format data. Did you reboot the phone to recovery?
You have to do this to write the new file system.
If it's still failing after reboot. Disable HTC sync or better still uninstall it if you don't use it.
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:

Thanks to all of you who responded, it turns out I've got 6 different versions of ADB on my PC due to various toolkits and things I've downloaded for my different devices, I also only have USB 3 ports on this machine but when I changed ADB version it worked, so again thanks to you all :good:

HTC One M7 Stuck in a Boot Loop

Alright, I recently purchased a phone that was stuck at the screen with the download icon in the arrow circle (http://forum.xda-developers.com/album.php?albumid=11886). When it is like this is can not be put into hboot. I then somehow got the phone into a boot loop. I did wipe the cache and that did not fix the problem. I did a factory reset via hboot, and it sent me back to the screen I mentioned before (http://forum.xda-developers.com/album.php?albumid=11886). I've now gotten the phone back into boot looping so I can access hboot. Recovery does work and you can access all the options. This phone is basically a stock HTC One M7. Has not been rooted, is locked, and it S-ON. Any help would be appreciated.
Thank you!

Flash a RUU

jdgreat4 said:
Flash a RUU
Click to expand...
Click to collapse
Could you link me to a tutorial? Apparently I need to know my MID and CID, and the video I did find to do that, needed usb debugging turned on in the settings which I don't even know if that is on. Can you link me to a how to tutorial for how to do this?

CloudHD said:
Could you link me to a tutorial? Apparently I need to know my MID and CID, and the video I did find to do that, needed usb debugging turned on in the settings which I don't even know if that is on. Can you link me to a how to tutorial for how to do this?
Click to expand...
Click to collapse
post the output of "fastboot getvar all", remove your imei and serialno before posting it

alray said:
post the output of "fastboot getvar all", remove your imei and serialno before posting it
Click to expand...
Click to collapse
Do I need a computer to do this? There's no option for this under fastboot in hboot. Currently don't have a computer available to me.

CloudHD said:
Do I need a computer to do this? There's no option for this under fastboot in hboot. Currently don't have a computer available to me.
Click to expand...
Click to collapse
Yes you need a computer with the latest android sdk installed and latest HTC drivers installed.
Btw, why did you buy this phone?

alray said:
Yes you need a computer with the latest android sdk installed and latest HTC drivers installed.
Btw, why did you buy this phone?
Click to expand...
Click to collapse
I bought it for a friend. He wanted something other than his locked up att samsung s4 active. He doesn't have much money and he figured he could fix this one and if he could't, he would just sell it again. I am personally used to iPhones (typing this on a jailbroken 4s right now) so this is all pretty new to me. We started troublesing it yesterday and he seemed to get stumped. He hates forums so I went ahead and signed up and made this post for him. Currently I have no access to a computer right now (at least one where I can install sdk and so on), but will have access later today. Will post when I have it.

CloudHD said:
I bought it for a friend. He wanted something other than his locked up att samsung s4 active. He doesn't have much money and he figured he could fix this one and if he could't, he would just sell it again. I am personally used to iPhones (typing this on a jailbroken 4s right now) so this is all pretty new to me. We started troublesing it yesterday and he seemed to get stumped. He hates forums so I went ahead and signed up and made this post for him. Currently I have no access to a computer right now (at least one where I can install sdk and so on), but will have access later today. Will post when I have it.
Click to expand...
Click to collapse
Latest HTC driver here: http://www.mediafire.com/download/8pawcxm9walwras/HTC_Driver_4.14.0.001.exe
You can install minimal adb and fastboot instead of the complete sdk, will be easier to use for you: http://forum.xda-developers.com/showthread.php?t=2317790
Once you have both installed, connect the phone to your computer, make sure its booted in bootloader mode --> fastboot mode and showing "fastboot usb" in red.
On your computer: Start menu --> Programs --> Minimal adb and fasboot --> minimal adb and fastboot
in the command prompt, type:
Code:
fastboot getvar all
copy and paste the output here (except the imei and s/n)
see you later

alray said:
Latest HTC driver here: http://www.mediafire.com/download/8pawcxm9walwras/HTC_Driver_4.14.0.001.exe
You can install minimal adb and fastboot instead of the complete sdk, will be easier to use for you: http://forum.xda-developers.com/showthread.php?t=2317790
Once you have both installed, connect the phone to your computer, make sure its booted in bootloader mode --> fastboot mode and showing "fastboot usb" in red.
On your computer: Start menu --> Programs --> Minimal adb and fasboot --> minimal adb and fastboot
in the command prompt, type:
Code:
fastboot getvar all
copy and paste the output here (except the imei and s/n)
see you later
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4M.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.12.502.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3921mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

CloudHD said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4M.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.12.502.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3921mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Ok well there is no RUU you can use with s-on so while the bootloader is locked all you can do is try to flash the current firmware. If the phone doesn't boot after that you will need to unlock the bootloader.
Download the firmware here https://www.androidfilehost.com/?fid=23501681358543602 put the zip in your fastboot folder on your pc and rename it "firmware.zip" Now with fastboot usb connected in the bootloader flash the firmware with the following fastboot commands
Code:
fastboot erase cache
fastboot oem rebootRUU
case sensitive
Your phone will reboot to a black screen with silver HTC logo. This is ruu mode we can now flash the firmware.
Code:
fastboot flash zip firmware.zip
The first flash is just a pre-update. The screen will go off and then return to ruu mode. Flash the zip again immediately.
Code:
fastboot flash zip firmware.zip
The second flash will flash the firmware, the progress bar on the screen will not reach 100% this is normal as long as the command line has finished it's output it's done.
Code:
fastboot reboot-bootloader
Now try to reboot the phone. If it doesn't boot you should now at least be able to do a factory reset. But you will need to unlock the bootloader at www.htcdev.com register an account and follow the instructions in the Unlock My Bootloader section. :good:

Danny201281 said:
Ok well there is no RUU you can use with s-on so while the bootloader is locked all you can do is try to flash the current firmware. If the phone doesn't boot after that you will need to unlock the bootloader.
Download the firmware here https://www.androidfilehost.com/?fid=23501681358543602 put the zip in your fastboot folder on your pc and rename it "firmware.zip" Now with fastboot usb connected in the bootloader flash the firmware with the following fastboot commands
Code:
fastboot erase cache
fastboot oem rebootRUU
case sensitive
Your phone will reboot to a black screen with silver HTC logo. This is ruu mode we can now flash the firmware.
Code:
fastboot flash zip firmware.zip
The first flash is just a pre-update. The screen will go off and then return to ruu mode. Flash the zip again immediately.
Code:
fastboot flash zip firmware.zip
The second flash will flash the firmware, the progress bar on the screen will not reach 100% this is normal as long as the command line has finished it's output it's done.
Code:
fastboot reboot-bootloader
Now try to reboot the phone. If it doesn't boot you should now at least be able to do a factory reset. But you will need to unlock the bootloader at www.htcdev.com register an account and follow the instructions in the Unlock My Bootloader section. :good:
Click to expand...
Click to collapse
Followed your instructions. Everything went good. I did a factory reset and the phone actually ended up rebooting. It's now just sitting here, and seems to be stuck at the htc logo. Going to go ahead and follow the steps to unlock my bootloader then report back.

@Danny201281 Boot loader is now unlocked!

CloudHD said:
@Danny201281 Boot loader is now unlocked!
Click to expand...
Click to collapse
Now the bootloader is unlocked you will need to flash a custom recovery and install a new Rom.
Download this http://techerrata.com/file/twrp2/m7/openrecovery-twrp-2.8.5.0-m7.img *<<<<< Put this in your fastboot folder and rename it recovery.img
Download this https://www.androidfilehost.com/?fid=23501681358545274
Boot the device to the bootloader and connect fastboot usb. Flash the recovery with fastboot
Code:
fastboot erase cache
fastboot flash recovery recovery.img
fastboot reboot-bootloader
When back in the bootloader select Recovery from the menu to load TWRP recovery. Before we do anything else a little spring cleaning. Select "Wipe" from the TWRP menu the "Format Data" You will be prompted to type yes to continue. When its done Select "Reboot" then "Reboot Recovery" You will see a message "No OS Installed" Reboot anyway and say No when asked to install supersu.
Now back in TWRP recovery you should be able to see the Internal Storage on your PC. Copy the rom file to the Internal Storage then from the TWRP menu select install and choose the rom .zip :good:
During the install with Aroma choose these options
Stock Radio = Yes
Stock Recovery = Yes
Root = No
When the install is completed reboot the device and hopefully it should boot up normally without any problems :good: :fingers-crossed:
P.S The first boot after a new flash can take an extended amount of time. Don't be supprised if it's stuck on the HTC logo screen for 15 minutes+ Just be patient

Danny201281 said:
Now the bootloader is unlocked you will need to flash a custom recovery and install a new Rom.
Download this http://techerrata.com/file/twrp2/m7/openrecovery-twrp-2.8.5.0-m7.img *<<<<< Put this in your fastboot folder and rename it recovery.img
Download this https://www.androidfilehost.com/?fid=23501681358545274
Boot the device to the bootloader and connect fastboot usb. Flash the recovery with fastboot
Code:
fastboot erase cache
fastboot flash recovery recovery.img
fastboot reboot-bootloader
When back in the bootloader select Recovery from the menu to load TWRP recovery. Before we do anything else a little spring cleaning. Select "Wipe" from the TWRP menu the "Format Data" You will be prompted to type yes to continue. When its done Select "Reboot" then "Reboot Recovery" You will see a message "No OS Installed" Reboot anyway and say No when asked to install supersu.
Now back in TWRP recovery you should be able to see the Internal Storage on your PC. Copy the rom file to the Internal Storage then from the TWRP menu select install and choose the rom .zip :good:
During the install with Aroma choose these options
Stock Radio = Yes
Stock Recovery = Yes
Root = No
When the install is completed reboot the device and hopefully it should boot up normally without any problems :good: :fingers-crossed:
P.S The first boot after a new flash can take an extended amount of time. Don't be supprised if it's stuck on the HTC logo screen for 15 minutes+ Just be patient
Click to expand...
Click to collapse
Thank you! My friend wanted to ask about soff and root for his device

CloudHD said:
Thank you! My friend wanted to ask about soff and root for his device
Click to expand...
Click to collapse
For s-off he will have to use Sunshine App it's the only working method for hboot 1.57. It does cost $25 but It's very easy. Just install and run the app :good:
Rooting can be done a number of ways the 2 easiest are to allow TWRP to install SupeSu when leaving recovery. Or you can install root with the Guru reset rom by selecting root during the installer. Also if he want's to keep the TWRP recovery don't take the stock recovery during the rom install.

Danny201281 said:
For s-off he will have to use Sunshine App it's the only working method for hboot 1.57. It does cost $25 but It's very easy. Just install and run the app :good:
Rooting can be done a number of ways the 2 easiest are to allow TWRP to install SupeSu when leaving recovery. Or you can install root with the Guru reset rom by selecting root during the installer. Also if he want's to keep the TWRP recovery don't take the stock recovery during the rom install.
Click to expand...
Click to collapse
alright. when formatting, I have been getting an unable to mount /cache and /system. should i be worries. Also, so when I do install the supesu? Can you give me some more detailed instructions like you have been doing? They're very helpful!!2220

CloudHD said:
alright. when formatting, I have been getting an unable to mount /cache and /system. should i be worries. Also, so when I do install the supesu? Can you give me some more detailed instructions like you have been doing? They're very helpful!!2220
Click to expand...
Click to collapse
Unable to mount /cache and /system happens during format or after? Did you reboot recovery after the format?
When you exit recovery TWRP will detect wheather or not the device is rooted. If it's not rooted TWRP will ask if you want to install supersu to root the phone. Say yes and TWRP will install root.
Although you could just install root when you install the rom. Just install with these options instead
Stock = Recovery No
Stock = Radio Yes
Root = Yes

Danny201281 said:
Unable to mount /cache and /system happens during format or after? Did you reboot recovery after the format?
When you exit recovery TWRP will detect wheather or not the device is rooted. If it's not rooted TWRP will ask if you want to install supersu to root the phone. Say yes and TWRP will install root.
Although you could just install root when you install the rom. Just install with these options instead
Stock = Recovery No
Stock = Radio Yes
Root = Yes
Click to expand...
Click to collapse
It seems to say this while it is updating partition details. Havent rebooted it as I wasn't sure about the cache and everything. So I guess before.

CloudHD said:
It seems to say this while it is updating partition details. Havent rebooted it as I wasn't sure about the cache and everything. So I guess before.
Click to expand...
Click to collapse
Reboot Recovery and then copy over and install the rom :good:
When you format data it is like repartitioning the phone. All the partitions are gone until you reboot. That's the reason they won't mount

Danny201281 said:
Reboot Recovery and then copy over and install the rom :good:
Click to expand...
Click to collapse
Alright, Thank you very much!!!
Will update how it all wetn when finished.

HELP !! HTC ONE M7 Bricked, with Recovery

hello guys, i got htc one m7, today, i rooted the phone and installed the twrp recovery, then rebooted to system and was working fine until i installed the modified rom "NuSenSeven", it successfully installed the rom but when i restarted the phone it stuck on boot animation and then rebooted and entered the recovery, i tried to wipe cache, data, factory reset, reboot, it still didn't worked, i installed the rom again with the different settings, and it still isn't working and unfortunately when i connect phone to computer, it cannot be detected. i have 2 laptops and it was working on both of them before it got stuck. Can anyone help me to fix it?
Thanks in advance.

TAT1SHA said:
hello guys, i got htc one m7, today, i rooted the phone and installed the twrp recovery, then rebooted to system and was working fine until i installed the modified rom "NuSenSeven", it successfully installed the rom but when i restarted the phone it stuck on boot animation and then rebooted and entered the recovery, i tried to wipe cache, data, factory reset, reboot, it still didn't worked, i installed the rom again with the different settings, and it still isn't working and unfortunately when i connect phone to computer, it cannot be detected. i have 2 laptops and it was working on both of them before it got stuck. Can anyone help me to fix it?
Thanks in advance.
Click to expand...
Click to collapse
What recovery version do you have?

donkeykong1 said:
What recovery version do you have?
Click to expand...
Click to collapse
I used the one from all in-one toolkit, i have no idea what version it is. also i tried to connect otb but it doesnt lets me use the otg neither. I wish it had a sd-card slot, it would escalate it easily.

TAT1SHA said:
I used the one from all in-one toolkit, i have no idea what version it is. also i tried to connect otb but it doesnt lets me use the otg neither. I wish it had a sd-card slot, it would escalate it easily.
Click to expand...
Click to collapse
Go into recovery and at the top of the screen is version number

donkeykong1 said:
Go into recovery and at the top of the screen is version number
Click to expand...
Click to collapse
TWRP v2.7.1.0a

TAT1SHA said:
TWRP v2.7.1.0a
Click to expand...
Click to collapse
I think your recovery is old. Find a newer version for your phone and flash it via recovery. You are on T-mobile, right?

Almost like something happens.
With HTC PN07200 (searching the model is a HTC ONE M7). I wanted to put a different rom.
The equipe was with the Bootloader "Locked", "S-Off" and "1111 user" (by what I read is superuser).
With the tools unlock "One_All-In-One_Kit_v3.1" or other downloadable for this model ...
Since fastboot command console and unlockcode .... I got to the "Unlocked" STEP 1 OK !!!
As recovery was already the "TWRP 2.5.0.0" try putting seven different ROMs without success.
Android_Revolution_HD-One_84.0.zip
Android_Revolution_HD-One_92.0_4a9d05.zip
Guru_Reset_M7_3.22.1540.1.zip
HTC_One_-_MaximusHD_53.0.0.zip
NuSenSeveN-LP-m7-gsm_v4.02_050715.zip
One_M7_7.15.401.1_stock_system_dump.zip
Sprint_HTC_One_m7wls_3_04_651_2_RUU.zip
The installation within TWRP is done without problems, you do not give error messages. But when asked reboot was presented with all of the 3 problem I describe them ...
or catch, white screen with HTC logo with a small and short vibration, black screen 3 seconds and again the white screen with HTC logo with a small and short vibration (bootloop)
or white screen with HTC logo with a small and short vibration and screen goes black.
or log in directly and fast recovery.
I tried without success to achieve other recovery programs from loading them into recovery Fastboot (fastboot flash recovery /// xxx.img fastboot erase cache)
TWRP 2.5.0.0.img
TWRP 2.7.0.0.img
TWRP 2.8.7.0.img
OpenRecovery-TWRP-2.5.0.0-m7wls.img
OpenRecovery-TWRP-2.7.0.0-m7.img
This team does not have external SD card, so did everything from internal memory, and also tried to OTG cable pendrive, without success.

donkeykong1 said:
I think your recovery is old. Find a newer version for your phone and flash it via recovery. You are on T-mobile, right?
Click to expand...
Click to collapse
I cant connect the phone to pc, its undetectable on all 3 laptops i got, i downloaded and installed about 3 different HTC drivers but it still isn't detected, i have bootloader unlocked and cid 1111, and S-off just in case if you might need to know that too

slash22toly said:
Almost like something happens.
With HTC PN07200 (searching the model is a HTC ONE M7)
Click to expand...
Click to collapse
PN0720000 is a Sprint CDMA HTC One.
I wanted to put a different rom.
Click to expand...
Click to collapse
So you need to use roms that are compatible with the Sprint HTC One (CDMA)
The equipe was with the Bootloader "Locked", "S-Off" and "1111 user" (by what I read is superuser).
Click to expand...
Click to collapse
11111111 is SuperCID not SuperUser, these are 2 different things. SuperCID allows the phone to bypass the CID check when flashing a RUU that was not made for your phone. Pretty useless for the Sprint M7 imo since you can only flash Sprint RUU because others ruu are not compatible with Sprint HTC one but anyway its ok to have superCID, you can keep it like that.
With the tools unlock "One_All-In-One_Kit_v3.1" or other downloadable for this model ...
Since fastboot command console and unlockcode .... I got to the "Unlocked" STEP 1 OK !!!
Click to expand...
Click to collapse
You might to use adb and fastboot directly from a command window using the latest android sdk tools. These toolkits are not up-to-date and not ideal when having issues. The other major issue with this toolkit is that its for the GSM M7 not for the Sprint variant.
As recovery was already the "TWRP 2.5.0.0" try putting seven different ROMs without success.
Android_Revolution_HD-One_84.0.zip ---> Its a rom for GSM htc one M7 (M7_UL or M7_U). You have a sprint M7 (M7WLS)
Android_Revolution_HD-One_92.0_4a9d05.zip ---> Its a rom for GSM htc one M7 (M7_UL or M7_U). You have a sprint M7 (M7WLS)
Guru_Reset_M7_3.22.1540.1.zip ---> Its a rom for GSM htc one M7 Developer edition PN0712000 not PN0720000
HTC_One_-_MaximusHD_53.0.0.zip ---> For GSM
NuSenSeveN-LP-m7-gsm_v4.02_050715.zip ---> For GSM
One_M7_7.15.401.1_stock_system_dump.zip ---> For GSM
Sprint_HTC_One_m7wls_3_04_651_2_RUU.zip ---> Its an RUU for Sprint HTC one. RUU are not flashed using custom recovery, its flashed using fastboot.
Click to expand...
Click to collapse
The installation within TWRP is done without problems, you do not give error messages. But when asked reboot was presented with all of the 3 problem I describe them ...
or catch, white screen with HTC logo with a small and short vibration, black screen 3 seconds and again the white screen with HTC logo with a small and short vibration (bootloop)
or white screen with HTC logo with a small and short vibration and screen goes black.
or log in directly and fast recovery.
Click to expand...
Click to collapse
All these errors are caused by flashing a GSM rom on a CDMA phone.
I tried without success to achieve other recovery programs from loading them into recovery Fastboot (fastboot flash recovery /// xxx.img fastboot erase cache)
TWRP 2.5.0.0.img
TWRP 2.7.0.0.img
TWRP 2.8.7.0.img
OpenRecovery-TWRP-2.5.0.0-m7wls.img
OpenRecovery-TWRP-2.7.0.0-m7.img
Click to expand...
Click to collapse
You can only flash recoveries that are compatible with Sprint HTC One M7, in that above list, only that one ending with "m7wls.img" should work. To flash a recovery you have to use:
Code:
fastboot flash recovery name_of_file.img
fastboot erase cache
fastboot reboot-bootloader
Better to post the output of "fastboot getvar all" so we can know everything about your phone, stop the confusion and direct you to a rom/recovery and instructions that will work with your phone. When posting the output of "fastboot getvar all", censor your IMEI, MEID and SERIALNO, you don't want to post these values on the forums. Other values will help determining what you can flash and how.

alray said:
PN0720000 is a Sprint CDMA HTC One.
So you need to use roms that are compatible with the Sprint HTC One (CDMA)
Click to expand...
Click to collapse
This little detail much explains my problem. Thanks
alray said:
Better to post the output of "fastboot getvar all" so we can know everything about your phone, stop the confusion and direct you to a rom/recovery and instructions that will work with your phone. When posting the output of "fastboot getvar all", censor your IMEI, MEID and SERIALNO, you don't want to post these values on the forums. Other values will help determining what you can flash and how.
Click to expand...
Click to collapse
Here is the data...
Code:
E:\ROMs\HTC One m7\fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.06.651.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXX
(bootloader) meid: XXXXXXXXXXXXXX
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4056mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
alray said:
You might to use adb and fastboot directly from a command window using the latest android sdk tools. These toolkits are not up-to-date and not ideal when having issues. The other major issue with this toolkit is that its for the GSM M7 not for the Sprint variant.
Click to expand...
Click to collapse
In the directory, I use a command console, and write fastboot... etc.
Code:
Directorio de E:\ROMs\HTC One m7\One_All-In-One_Kit_v3.1\HTC\Data
09/10/2015 10:13 <DIR> .
09/10/2015 10:13 <DIR> ..
19/08/2012 01:00 846.848 aapt.exe
19/08/2012 01:00 191.488 adb.exe
19/08/2012 01:00 96.256 AdbWinApi.dll
19/08/2012 01:00 60.928 AdbWinUsbApi.dll
20/05/2013 04:03 1.151.546 APKBIT.exe
20/11/2010 22:23 345.088 cmd.exe
05/10/2015 17:19 1.345 Data - Acceso directo.lnk
19/08/2012 01:00 140.800 fastboot.exe
01/04/2012 00:53 186 mainver_fix.bat
19/02/2012 01:24 656.708 misctool
19/02/2012 08:41 4.526 misctool.c
07/10/2015 14:50 1.288.121.395 One.zip
28/07/2013 13:43 <DIR> Recoveries
07/10/2015 14:40 1.204.676.279 Sprint_HTC_One_m7wls_3_04_651_2_RUU.zip
28/07/2013 13:42 <DIR> SU
06/10/2015 10:48 1.360.737 Superuser.zip
14 archivos 2.497.654.130 bytes
4 dirs 60.303.917.056 bytes libres
alray said:
You can only flash recoveries that are compatible with Sprint HTC One M7, in that above list, only that one ending with "m7wls.img" should work. To flash a recovery you have to use:
Code:
fastboot flash recovery name_of_file.img
fastboot erase cache
fastboot reboot-bootloader
Click to expand...
Click to collapse
Ok. i will use that
alray said:
Sprint_HTC_One_m7wls_3_04_651_2_RUU.zip ---> Its an RUU for Sprint HTC one. RUU are not flashed using custom recovery, its flashed using fastboot.
Click to expand...
Click to collapse
So, I don´t need to use a twpr to flash the phone?. but from fastboot, how can i flash a .ZIP file? I thought i needed a .IMG
------------------------------------------------------------------------------------
I just installed ok the OpenRecovery-TWRP-2.5.0.0-m7wls.img. it´s running ok
I unzipped file Sprint_HTC_One_m7wls_3_04_651_2_RUU.zip ....
Code:
adb.exe
AdbWinApi.dll
android-info.txt
ARUGlobal.dll
ARUWizard.exe
ARUWizard.ini
ARUWizard_ARA.lng
ARUWizard_BrPt.lng
ARUWizard_Cze.lng
ARUWizard_Dan.lng
ARUWizard_Dut.lng
ARUWizard_Eng.lng
ARUWizard_EuPt.lng
ARUWizard_EuSpa.lng
ARUWizard_FIN.lng
ARUWizard_Fra.lng
ARUWizard_Ger.lng
ARUWizard_Grk.lng
ARUWizard_Ita.lng
ARUWizard_Jap.lng
ARUWizard_Nor.lng
ARUWizard_Pol.lng
ARUWizard_Rus.lng
ARUWizard_SC.lng
ARUWizard_Svk.lng
ARUWizard_TC.lng
ARUWizard_Thai.lng
ARUWizard_TRK.lng
default.pal
DIFxData.ini
DMData00.DAT
DMData01.DAT
DMData02.DAT
DMData03.DAT
DMData04.DAT
DMData05.DAT
DMData06.DAT
DMData07.DAT
DMData08.DAT
DMData09.DAT
DOL_RECOVERY02_01.bmp
FontData.ini
htc_fastboot.exe
isrt.dll
MonitorConsole.exe
PHONE.bmp
ReadMe_ARA.doc
ReadMe_BrPt.doc
ReadMe_Cze.doc
ReadMe_Dan.doc
ReadMe_Dut.doc
ReadMe_Eng.doc
ReadMe_EuPt.doc
ReadMe_EuSpa.doc
ReadMe_FIN.doc
ReadMe_Fra.doc
ReadMe_Ger.doc
ReadMe_Grk.doc
ReadMe_Ita.doc
ReadMe_Jap.doc
ReadMe_Nor.doc
ReadMe_Pol.doc
ReadMe_Rus.doc
ReadMe_SC.doc
ReadMe_Svk.doc
ReadMe_TC.doc
ReadMe_Thai.doc
ReadMe_TRK.doc
rom.zip
setup.inx
StringTable_0x0409.ips
UPD_RECOVERY00_01.bmp
UPD_RECOVERY01_01.bmp
UPD_RECOVERY02_01.bmp
UPD_RECOVERY03_01.bmp
UPD_RECOVERY04_01.bmp
_isres_0x0409.dll
I ran the file "ARUWizard.exe" and ...
HTC Android Phone ROM Update Utility 2.0.5.2013, some steps ok,
Verify that you want to apdate the ROM version from 4.06.651.9 to 3.04.651.2, ok
Some steps before, the ERROR [155]: UNKNOWN ERROR (the rom update cannot update. Please get the correct ROM update utility).

slash22toly said:
Code:
E:\ROMs\HTC One m7\fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.06.651.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXX
(bootloader) meid: XXXXXXXXXXXXXX
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4056mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
So, I don´t need to use a twpr to flash the phone?. but from fastboot, how can i flash a .ZIP file? I thought i needed a .IMG
Click to expand...
Click to collapse
If you flash a rom, you must flash it using twrp and make sure your twrp is for M7WLS variant and that the rom is also for that variant. If flashing a RUU, you must flash it using fastboot. Yes the ruu are zip files, all the required .img files are packed inside of it, you just need to flash the entire zip file. You can only flash ruu for sprint so*the ones that match with the sprint CID MID and version number x.xx.651.x <----- important since your phone is s-off. Make sure you are flashing the right files because with s-off, you can brick your phone easily if flashing a file that is not for your variant. Better to ask if you are unsure.
Code:
fastboot oem rebootRUU
fastboot flash zip your_ruu_name.zip
fastboot flash zip your_ruu_name.zip
fastboot reboot
That ruu is a downgrade btw but it should flash fine since your phone is s-off.

Im not shure the ruu files. I think it will be better, if i flash a custom ROM whith twpr. I only need to find a ROM for sprint m7wls.
What ROM do you recomend?

slash22toly said:
Im not shure the ruu files. I think it will be better, if i flash a custom ROM whith twpr. I only need to find a ROM for sprint m7wls.
What ROM do you recomend?
Click to expand...
Click to collapse
you can find Sprint HTC One M7 rom there: http://forum.xda-developers.com/sprint-htc-one/development
Make sure your phone have all the requirements before flashing a rom. Some roms like the Lollipop ones, requires to be on the latest firmware to be used, so if its the case you won't be able to flash those one, you'll probably be limited to kitkat roms.

alray said:
you can find Sprint HTC One M7 rom there: http://forum.xda-developers.com/sprint-htc-one/development
Click to expand...
Click to collapse
Well, my solution...
I Install in my PC the HTC One M7 driver MTP
By Fastboot, I install a TWPJ (twrp-2.8.7.0-m7.img)
Wipe ALL and format.
Install the last Cyanogenmod (CM11) custom ROM (https://download.cyanogenmod.org/get/jenkins/90464/cm-11-20141112-SNAPSHOT-M12-m7spr.zip)
Install a Gapps for 4.4 (ARM-4.4-Pico) (OpenGapp)
Install the Argentina Radio (Link)
It Run OK!!!!!!!!
---------- Post added at 03:20 PM ---------- Previous post was at 02:48 PM ----------
Well, my solution...
I Install in my PC the HTC One M7 driver MTP
By Fastboot, I install a TWPJ 2.8.7
Wipe ALL and format.
Install the last Cyanogenmod (CM11) custom ROM (download.cyanogenmod.org/get/jenkins/90464/cm-11-20141112-SNAPSHOT-M12-m7spr.zip)
Install a Gapps for 4.4 (ARM-4.4-Pico) (opengapps.org)
Install the Argentina Radio (androidfilehost.com/?fid=23159073880933335)
It Run OK!!!!!!!!