Database Develop

[ROM][TAR] Stock NG2 Odin flashable

You will get the KNOX bootloader if you flash this.
YOU CANNOT UNDO THIS, ITS PERMANENT. FLASHING ANYTHING UNOFFICIAL AFTER FLASHING THIS TAR WILL VOID YOUR WARRANTY​
Just the NG2 FULL stock tar.
Do NOT rename the tar file. Even though it may be convenient to do so, Odin may fail the md5 check for no reason.
(L720VPUFNG2_L720SPTFNG2_L720VPUFNG2_HOME.tar.md5)
This is NOT ROOTED. Its the original TAR file for people who need an Emergency Recovery for their phones, and dont want to wait hours for it to download from slow file hosts.
Mediafire
Instructions:
1. Download and Extract tar above and download Odin
2. Put phone into download mode (power off, then power button + Volume Down, then volume up when prompted)
3. Open Odin (right click > open as administrator)
4. Load stock tar into the PDA slot
5. Start flashing
6. Grab some popcorn because it will take a while
7. Profit

Is this going to update bootloader into NG2?
Is NG2 bootloader unlocked?
Thank you so much,

will this work on rooted phone?
im looking to put my phone back to unrooted stock. will this flash right on a rooted phone? im guessing it will but just want to make sure.

jam97 said:
Is this going to update bootloader into NG2?
Is NG2 bootloader unlocked?
Thank you so much,
Click to expand...
Click to collapse
Yes this will update you to the new update NG2 and no the bootloader is still locked.
chriseboy said:
im looking to put my phone back to unrooted stock. will this flash right on a rooted phone? im guessing it will but just want to make sure.
Click to expand...
Click to collapse
Yes this will flash right on a rooted phone. The purpose of this is to go back to stock from either rooted or custom rom.
Sent from my SPH-L720

ROMANTiC KiD said:
Yes this will update you to the new update NG2 and no the bootloader is still locked.
Yes this will flash right on a rooted phone. The purpose of this is to go back to stock from either rooted or custom rom.
Sent from my SPH-L720
Click to expand...
Click to collapse
sorry for this stupid question , but will I be able to flash a custom recovery after flashing this image?
Thank you,
Sent from my SPH-L720 using XDA Free mobile app

jam97 said:
sorry for this stupid quastion , but will I be able to flash a custom recovery after flashing this image?
Thank you,
Sent from my SPH-L720 using XDA Free mobile app
Click to expand...
Click to collapse
You will need to re-root the phone after installing this file! Then you will be able to install a custom recovery..

Thanks for putting this on a speedy host. I just downloaded it tonight in under half an hour at my daughter's house, and she doesn't have a particularly fast internet connection.
A quick question - does this file leave your programs intact? Sometimes I like a total wipe (except for my SD card), and start fresh.
Thanks again

my wifi is broken after flashing. won't turn on

rtwrobert10 said:
my wifi is broken after flashing. won't turn on
Click to expand...
Click to collapse
same problem let me know if you find how to fix it

rtwrobert10 said:
my wifi is broken after flashing. won't turn on
Click to expand...
Click to collapse
biscojams said:
same problem let me know if you find how to fix it
Click to expand...
Click to collapse
Reflash it again
Sent from my SPH-L720

rtwrobert10 said:
my wifi is broken after flashing. won't turn on
Click to expand...
Click to collapse
biscojams said:
same problem let me know if you find how to fix it
Click to expand...
Click to collapse
ROMANTiC KiD said:
Reflash it again
Sent from my SPH-L720
Click to expand...
Click to collapse
Same here, I wiped then installed twice, no wifi. I'll try one more time,

DAFTEK said:
Same here, I wiped then installed twice, no wifi. I'll try one more time,
Click to expand...
Click to collapse
Try flashing the ng2 kernel after the install. Thru custom recovery.
https://www.androidfilehost.com/?fid=23622183712458388
Thanks to @ g_ding84

DAFTEK said:
Same here, I wiped then installed twice, no wifi. I'll try one more time,
Click to expand...
Click to collapse
That's odd.
I have installed this NG2 tar file with Odin on 2 different phones and WiFi works perfect on both..

2WhiteWolves said:
Try flashing the ng2 kernel after the install. Thru custom recovery.
https://www.androidfilehost.com/?fid=23622183712458388
Thanks to @ g_ding84
Click to expand...
Click to collapse
Thanks for the reply. I did try one more time and this time I went back in recovery and did the two wipes, went back in to download, opened odin3 3.09 via administrator and removed the auto reboot check. after it finished i manually rebooted and wifi worked.
---------- Post added at 10:06 PM ---------- Previous post was at 10:02 PM ----------
Now I have another problem. I am no longer with sprint and my phone is unlocked from sprint. I have been using the GOLDENEYE rom on Walmart Family Mobile and all was warning well except for sometimes not connecting calls so I thought i go back to stock with this rom. Problem now is I can make calls with the Walmart sim card, put in the APN settings but i am unable to remove the Hands Free Activation nagging.. Is there anyway to make it go away?

DAFTEK said:
[/COLOR]Now I have another problem. I am no longer with sprint and my phone is unlocked from sprint. I have been using the GOLDENEYE rom on Walmart Family Mobile and all was warning well except for sometimes not connecting calls so I thought i go back to stock with this rom. Problem now is I can make calls with the Walmart sim card, put in the APN settings but i am unable to remove the Hands Free Activation nagging.. Is there anyway to make it go away?
Click to expand...
Click to collapse
Have you tried to pull down the notification bar with two fingers > long press on Hands Free icon to see if something is turned on to make it show up on notification bar? If turned on, shut it off. Hopefully it is that simple. If not that simple, I have no clue how to make it stop. Maybe someone else does.
I haven't heard of anyone having that problem.

Yeah, I tried everything, it's part of the rom I think, nothing worked to make it go away..
I just went back to goldeneye rom, all working perfect again. Thanks.

I just flashed this rom through odin and it didn't wipe any of my programs, isn't is supposed to?

RTbar said:
I just flashed this rom through odin and it didn't wipe any of my programs, isn't is supposed to?
Click to expand...
Click to collapse
+1
also I confirm that everything is working great.

RTbar said:
I just flashed this rom through odin and it didn't wipe any of my programs, isn't is supposed to?
Click to expand...
Click to collapse
Nope. it doesn't wipe data unless stated by the OP that it does. It only restores any apps deleted, or reverses any mods made. Example if you are running Aosp and Odin back to stock. You will get bootloop. After Odin always go to stock recovery and do a factory reset to have a clean install.
Sent from my SPH-L720

Wifi didn't work for me on this rom, coming from a custom mf9 rom. So I odin mf9 bootloader package, and then flashed stock mf9 odexed rooted rom, then odin the mf9 kernel. And did NG2 upgrade through Kies. Now Wi-Fi finally works for me but it's impossible to root. But at least now I got everything working, when I get off of work I can flash the OP version of NG2 cuz at least I could root that 1.

Please help

Hi im having difficulty restoring my g900a back to stock. i think i found the stock firmware from zedomax and it works but im still having a problem. on his video he is extracting ONE file but when i download the att firmware there is 4 and im pretty sure i need all the fiels to be flashed. is there a way to do that? here is the file http://galaxys5root.com/galaxy-s5-stock-firmware/
when i unzip there is 4 tar files. i did the biggest one but i think im missing the bootloader, recovery ect. please help anyone ive tried different stock firmwares on xda and all of them just fail. thanks guys.

What method are you using to flash? Odin or safestrap? Do you have safestrap installed?

feelinfroggy23 said:
Hi im having difficulty restoring my g900a back to stock. i think i found the stock firmware from zedomax and it works but im still having a problem. on his video he is extracting ONE file but when i download the att firmware there is 4 and im pretty sure i need all the fiels to be flashed. is there a way to do that? here is the file http://galaxys5root.com/galaxy-s5-stock-firmware/
when i unzip there is 4 tar files. i did the biggest one but i think im missing the bootloader, recovery ect. please help anyone ive tried different stock firmwares on xda and all of them just fail. thanks guys.
Click to expand...
Click to collapse
It might be the actual stock ROM (I didn't check that particular file you mentioned) but in general the stock ROM for this phone comes in four files which begin with the following:
AP, CP, CSC, BL
You can load those in their corresponding spots in Odin (BL in bootloader, and so on)
Or you can head over to sammobile and download the stock firmware, which is a Samsung Kies dump file. This is one giant tar ball ( like the one in the video) which you'll just load into the PDA section of Odin 3.09 and flash away.

When you're clicking on ODIN are you running it as Admin? Also see the guy in the video using a USB 2 cable.

yes i am running as admin. it only works when i only use pda. when i put in the bl and csc and cp is keeps failing. after if flashed the pda file the phone reboots and freezes on the samsung screen. should i try doing it one by one?

it wont work still failing. should i flash one by one?

I did but i cant load it. i only get to the samesung logo and it freezes. only thing i can get into is download mode and the stock recovery. is there a way to boot into safestrap when phone is off? im running out of ideas and ive tried to do it on different computers and cords.

it seems like the bootloader file is the only one not working. do you have any idea? please please please help guys

feelinfroggy23 said:
it seems like the bootloader file is the only one not working. do you have any idea? please please please help guys
Click to expand...
Click to collapse
Don't flash the bootloader and you should be fine

I tried that and it still freezes on Samsung logo. Does anyone have a legit firemware I've tried the ones on here or does anyone know how to get the one from sammobile? Really appreciating the help
Sent from my RM-975_1005 using XDA Windows Phone 7 App

Download the G900A_Downgrade_to_NCE.tar from here:
https://www.androidfilehost.com/?fid=23622183712464416
Use Odin 3.09 and flash in AP slot. Once it is done then take the OTA for NG3 then OA1
Thanks to @muniz_ri
Sent from my SAMSUNG-SM-G900A

Waiting4MyAndroid said:
Download the G900A_Downgrade_to_NCE.tar from here:
https://www.androidfilehost.com/?fid=23622183712464416
Use Odin 3.09 and flash in AP slot. Once it is done then take the OTA for NG3 then OA1
Thanks to @muniz_ri
Sent from my SAMSUNG-SM-G900A
Click to expand...
Click to collapse
the download says thats for the gs4?

feelinfroggy23 said:
the download says thats for the gs4?
Click to expand...
Click to collapse
It is the right tar. I have used it many times to go back to stock after root.
Sent from my SAMSUNG-SM-G900A

Can you walk me through your process please?
Sent from my RM-975_1005 using XDA Windows Phone 7 App

feelinfroggy23 said:
I tried that and it still freezes on Samsung logo. Does anyone have a legit firemware I've tried the ones on here or does anyone know how to get the one from sammobile? Really appreciating the help
Sent from my RM-975_1005 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Use the G900A_DOwngrade_to_NCE.tar from this link http://forum.xda-developers.com/att-galaxy-s5/general/how-to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120 and flash in the pda. that should fix your problem.

feelinfroggy23 said:
Can you walk me through your process please?
Sent from my RM-975_1005 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Download the G900A_Downgrade_to_NCE.rar. Unzip and you should get this file "G900A_Downgrade_to_NCE.tar.md5". Now Run Odin 3.09 as admin, and put your phone in download mode. In Odin click on the AP icon and point to the G900A_Downgrade_to_NCE.tar.md5. Wait until Odin finishes loading the file it takes some time. Plug usb cable to your phone while in download mode. Once Odin is ready click start. Wait until Odin is done. Your phone will reboot once the flash is done. Please Thank @muniz_ri for his hard work.

Yea. Prolly should have checked this forum before you went on the journey.
---------- Post added at 10:45 PM ---------- Previous post was at 09:56 PM ----------
Now, Instead of making sarcastic comments, I will provide some assistance. There is one thing left out of all of these tutes that took me a while to catch on to. As a result, my phone was doing the same thing.
When you follow the downgrade instructions, yes leave out the boot loader. Sometimes, the downgrade doesn't do the job properly, so you'll have to go to this thread, scroll to the very bottom post and you'll see a link for "G900A_NCE_Stock_Modem"
You will need to flash this along with the stock firmware. It should correct the boot issue. (Flash in PDA slot)
Furthermore, you will not be able to update via WiFi OTA. You'll have to download the official update files in .zip format.
Go to this thread for the " G900A_NCEtoNG3_OTA.zip" to update from NCE to NG3.
This next step is optional, but it won't hurt to try it. Go here and grab the stock NG3 modem and recovery. Flash each (one at a time) in the PDA slot.
My personal opinion of the 4.4.4 update is low. There are many issues with it. But if you're trying get the phone completely up to date then:
Go here for the final update.
You should now be set. Please thank @muniz_ri for his unrelenting dedication to helping others.
It is not my intention to be an ass, but you should begin with google, and then search entire AT&T forum before posting questions like this. Chances are, others have had the same problem, asked, and received a solution exactly like this.
Anyways, I hope I was able to guide you in the right direction...
Edit: It seems that both of the update zips are in the OA1 root guide thread.
P.S.
Your phone is from AT&T, right?

Where's the latest BL and Modem?

Need a TWRP / ODIN flashable for the G920T.
Thanks!

I don't know how to do the .md5 signature but these should work. Pulled from new firmware today. For odin
Mega link
Modem is 20mb over the limit so have to put it on mega

Alarand said:
I don't know how to do the .md5 signature but these should work. Pulled from new firmware today. For odin
Mega link
Modem is 20mb over the limit so have to put it on mega
Click to expand...
Click to collapse
Awesome! DOJC is the latest?!
Nevermind! Looks like it is! Thanks:
http://www.sammobile.com/firmwares/database/SM-G920T/TMB/

seanvree said:
Awesome! DOJC is the latest?!
Click to expand...
Click to collapse
Yeah

Is this still the newest version of the BL and Modem?
update: seem to be. Thank you very much i just bought a used phone that had all the updates already installed and i was having a hard time finding the right version to use with odin. What is weird is that the knok was already tripped on this used phone so im sure the previous owner had already installed either a custom fw or recovery. I just wish they had left the custom stuff on the phone. -_-
On a side note is there a DOJC custom rom you guys could recommend?
Thanks again.

IncadudeF said:
Is this still the newest version of the BL and Modem?
update: seem to be. Thank you very much i just bought a used phone that had all the updates already installed and i was having a hard time finding the right version to use with odin. What is weird is that the knok was already tripped on this used phone so im sure the previous owner had already installed either a custom fw or recovery. I just wish they had left the custom stuff on the phone. -_-
On a side note is there a DOJC custom rom you guys could recommend?
Thanks again.
Click to expand...
Click to collapse
I don't think there are any out yet. That said, as this pushed a new bootloader and modem reportedly, there's not much room left for additional changes in the 60mb update file.

Note 4 SM-N910T that keeps getting stuck in a boot loop

So i purchased a Note 4 SM-N910T about a year ago. It worked fine but last month shortly after the 5.1.1 update I did it started randomly restarting for no reason. First i taught it was Snapchat because I red somewhere that there are camera problems, so I stopped using it. But it kept restarting even after that. From then I have made a factory and a master reset, rooted the phone and even installed CM 12. No mater what i do it keeps on restarting. The only way to get it out of the boot loop is to connect it to a charger that is not a fast charger. Then it starts charging and works normally and you can do everything normally. After you remove it from the charger it works as long as you do not use it. When you start using it and want to do something with it it starts restarting again. I hope somebody can help me fix this issue. I have noticed that connecting it to WIFI makes it 100% sure that it will restart any moment. If you leave it without WIFI as long as you do not do anything big it will not restart. For example I watched series on my phone I downloaded beforehand. I was able to go to the CM 12 file manager and change series for the duration of my bus drive and it has not reset yet and it has not been connected to a charger for around 12 hours already.
My last resort is to wait 3 hours for the stupid free 5.0.1 official firmware and flash it using the TWRP Recovery or Odin. If that does not work I would have t give it to a service. Any help will be greatly appreciated! Also a link to where I can download the 5.0.1 official firmware for free in normal speed will be of greatly appreciated as well!
Merry Christmas!

That's odd, I recommend odin flashing the stock ROM and everything. (Modem + bootloader) the latest one is DOK2 for T-Mobile

MisterCoolBeans said:
That's odd, I recommend odin flashing the stock ROM and everything. (Modem + bootloader) the latest one is DOK2 for T-Mobile
Click to expand...
Click to collapse
Do you have a link to where I could download that because all I found were sites where the free user speeds took 3 hours to download 1.5 GB?:crying:

Let me see if I can find one
---------- Post added at 04:41 PM ---------- Previous post was at 04:40 PM ----------
Here is the full untouched ROM that you can download from Sammobile but it was uploaded to mega instead.
http://forum.xda-developers.com/note-4-tmobile/development/mirror-stock-tw-t3260858
Make sure you click the first link!

MisterCoolBeans said:
Let me see if I can find one
---------- Post added at 04:41 PM ---------- Previous post was at 04:40 PM ----------
Here is the full untouched ROM that you can download from Sammobile but it was uploaded to mega instead.
http://forum.xda-developers.com/note-4-tmobile/development/mirror-stock-tw-t3260858
Make sure you click the first link!
Click to expand...
Click to collapse
Thank you very much! I put it for download and it has a reasonable speed. After its done I will try and flash it! I hope the problem does not occur anymore!

Lazarov987 said:
Thank you very much! I put it for download and it has a reasonable speed. After its done I will try and flash it! I hope the problem does not occur anymore!
Click to expand...
Click to collapse
So since the phone restarts when I connect it to the WIFI should i also flash the stock modem or just try first without it?

Lazarov987 said:
So since the phone restarts when I connect it to the WIFI should i also flash the stock modem or just try first without it?
Click to expand...
Click to collapse
If you flash the stock firmware it includes the baseband and modem

ShrekOpher said:
If you flash the stock firmware it includes the baseband and modem
Click to expand...
Click to collapse
To revive the thread I tried flashing the N910TUVU2DOK2_N910TTMB2DOK2_N910TUVU2DOK2_HOME.tar via Odin. It all went fine and after starting the phone it went on to the step where its optimizing apps. It got stuck there and it went back to the boot loop. I had reflash the CM 12 and TWRP Recovery and now I am back at 0. So my question is how should I flash the stock rom. Go to TWRP do a factory reset than turn the phone off and flash the stock rom via Odin? Should I also flash TWRP ans SuperSu after flashing the stock rom?
Thank you for your help!

I've been having the same problem for about a week and a half; it's super annoying. I was running Dynamic Pop on COG2 then yesterday I updated to DOK2 and flashed Maximum Overdrive... no improvement. It rarely even fully boots before freezing or rebooting.
My best guess as to what the problem is that it may be overheating because it tends to actually boot if I put it in the freezer while booting, but then it freezes soon after taking it out. I suppose it could also be internal memory corruption.
Either way, I'm getting ready to do a warranty exchange.

Lazarov987 said:
To revive the thread I tried flashing the N910TUVU2DOK2_N910TTMB2DOK2_N910TUVU2DOK2_HOME.tar via Odin. It all went fine and after starting the phone it went on to the step where its optimizing apps. It got stuck there and it went back to the boot loop. I had reflash the CM 12 and TWRP Recovery and now I am back at 0. So my question is how should I flash the stock rom. Go to TWRP do a factory reset than turn the phone off and flash the stock rom via Odin? Should I also flash TWRP ans SuperSu after flashing the stock rom?
Thank you for your help!
Click to expand...
Click to collapse
First focus on getting a clean stock firmware booted. Do what you mentioned above but don't flash TWRP or superSu until the stock ROM is stable. We need to narrow down the issues so do as few modifications as possible.
---------- Post added at 06:02 AM ---------- Previous post was at 06:01 AM ----------
jazzmachine said:
I've been having the same problem for about a week and a half; it's super annoying. I was running Dynamic Pop on COG2 then yesterday I updated to DOK2 and flashed Maximum Overdrive... no improvement. It rarely even fully boots before freezing or rebooting.
My best guess as to what the problem is that it may be overheating because it tends to actually boot if I put it in the freezer while booting, but then it freezes soon after taking it out. I suppose it could also be internal memory corruption.
Either way, I'm getting ready to do a warranty exchange.
Click to expand...
Click to collapse
You may have messed up the partitions. There is a thread about the pit file you should check out.

ShrekOpher said:
First focus on getting a clean stock firmware booted. Do what you mentioned above but don't flash TWRP or superSu until the stock ROM is stable. We need to narrow down the issues so do as few modifications as possible.
---------- Post added at 06:02 AM ---------- Previous post was at 06:01 AM ----------
You may have messed up the partitions. There is a thread about the pit file you should check out.
Click to expand...
Click to collapse
What thread is that and how do I find it? I mean I always checked that in Odin i never had Re-partition on.

ShrekOpher said:
First focus on getting a clean stock firmware booted. Do what you mentioned above but don't flash TWRP or superSu until the stock ROM is stable. We need to narrow down the issues so do as few modifications as possible.
---------- Post added at 06:02 AM ---------- Previous post was at 06:01 AM ----------
You may have messed up the partitions. There is a thread about the pit file you should check out.
Click to expand...
Click to collapse
I actually downloaded 2 stock roms for my Note 4. One was the COG2 and the other one was the completely stock firmware. I tried flashing them but Odin failed (Auth) whatever that means. The only stock rom I was able to flash was 5.1.1 but it wouldn't boot up so I had to install CM 12 again! I have no idea how to fix the phone. All I want is to return to 5.0.1 and delete any changes. The phone has no apps on it so i have nothing to loose but I do not know how to do it..

Lazarov987 said:
I actually downloaded 2 stock roms for my Note 4. One was the COG2 and the other one was the completely stock firmware. I tried flashing them but Odin failed (Auth) whatever that means. The only stock rom I was able to flash was 5.1.1 but it wouldn't boot up so I had to install CM 12 again! I have no idea how to fix the phone. All I want is to return to 5.0.1 and delete any changes. The phone has no apps on it so i have nothing to loose but I do not know how to do it..
Click to expand...
Click to collapse
You cannot use 5.0.1 ROMs on DOK2 they will never boot and no down grading. You have to use 5.1.1 ROMs for now on.

ShrekOpher said:
You cannot use 5.0.1 ROMs on DOK2 they will never boot and no down grading. You have to use 5.1.1 ROMs for now on.
Click to expand...
Click to collapse
check this out
http://forum.xda-developers.com/not...-solution-to-emmcread-write-problems-t3281179

Ashwin Prabhunerurkar said:
check this out
http://forum.xda-developers.com/not...-solution-to-emmcread-write-problems-t3281179
Click to expand...
Click to collapse
This is exactly what is happening to my T-Mobile Note 4 (SM-N910T) and the thing that you did to your Canadian Note 4 is exactly what I want to do. But can I use the firmware you provided at: http://forum.xda-developers.com/note-4/general/ref-stock-firmware-kernel-modem-recovery-t2920452
or must I use the T-Mobile ones and if I have to use the N910T firmware where can I get it so I can do what you did? A link or a thread would be amazing cause I really miss using my phone as normal!

Lazarov987 said:
This is exactly what is happening to my T-Mobile Note 4 (SM-N910T) and the thing that you did to your Canadian Note 4 is exactly what I want to do. But can I use the firmware you provided at: http://forum.xda-developers.com/note-4/general/ref-stock-firmware-kernel-modem-recovery-t2920452
or must I use the T-Mobile ones and if I have to use the N910T firmware where can I get it so I can do what you did? A link or a thread would be amazing cause I really miss using my phone as normal!
Click to expand...
Click to collapse
Don't flash Canadian tar files
We are searching for the answer
Hope to come back to you with a solution

Try Odin flash back to stock.
@dannygoround

dannygoround said:
Try Odin flash back to stock.
@dannygoround
Click to expand...
Click to collapse
Doesnt work. Wont flash the stock rom. It says Fail(Auth)

FW-8.0.0] S7 EDGE SNAPDRAGON - UNIVERSAL OREO G935UUES4CRG3 July 1/2018 sec

I Downloaded The Fw From Sammobile, Yes Its Was Very Slow, Thats Why I Re-upped It Untouched To Androidfilehost, Much Faster To Dl For Others.
Only For Snapdragon Variants, Its The Universal Firmware, Its Free Of Carrier Bloat But Has Some Samsung Useless Apps.
Not For Exynos Variants Like The Sm-g935f, Etc.
MORE ABOUT UNIVERSAL FW READ THIS
The Zip Has The Att Extension But All Universal Snapdragon Fw Are The Same Afaik, It Does Not Install Anything Specific For Att,
Im On Telus/koodo Using The Sm-g935a Without Issues, Shows Lte Signal When On Data Mode.
Idk If Auto Updates Work, Although Update Options Are Available From The System Menu
Instructions:
Dl Zip, Extract Zip, Put Phone In Dl/odin Mode. Run Odin As Admin, And Load Each Cp, Ap, Bl And Csc(Dont Use The Home Csc As I Read Its Fracks Things Up), Just Use "Csc_oym" File In Odin
Fyi. I Used Princes Odin But Failed, Used Untouched Odin And It Flashed Successfully. Was On Nougat 7.0 Sim Unlocked SM-G935A At&t Branded Stock Fw. I Included Both For Your Pleasure.
Afaik It Will Wipe Your Phone, Do A Backup As Needed
make a backup by using adb, search for this method, and a twrp nandroid
always make a backup, and never just one, and save them somewhere safe in multiple locations and clouds, hard drives die all the time
Disclaimer, Im Not Responsible For What You Do To Your Phones
G935UUES4CRG3_G935UOYM4CRG3_ATT.zip - 2.9GB
Odin3_v3.13.1.zip
Odin3+v3.12+(PrinceComsy).zip - not working with this fw

does wifi calling work this way or no bc its the unlocked version primarily?

Hi , can you confirm if this has no issue? im planning to flash my rom into oreo as well. thanks for sharing this.

Misslys9 said:
does wifi calling work this way or no bc its the unlocked version primarily?
Click to expand...
Click to collapse
rhayann77 said:
Hi , can you confirm if this has no issue? im planning to flash my rom into oreo as well. thanks for sharing this.
Click to expand...
Click to collapse
most answers to questions are linked in the op
MORE ABOUT UNIVERSAL FW READ THIS

vincom said:
answers, if any, are linked in the op
MORE ABOUT UNIVERSAL FW READ THIS
Click to expand...
Click to collapse
Hi Vincom, yes i have already read the article. the main reason im flashing the rom is because of the hidden DATA icon in the toggle screen. and also i want my phone to have the OREO update as well. this is my first samsung phone. i have experience in flashing ROMs in my xiaomi redmi 1s phone. so im a bit skeptical if i can do this on my own. this odin process is very new to me. so what is the worst thing that can happen it i brick my phone? can i do a hard reset and will it default to the stock AT&T ROM if ever?

rhayann77 said:
Hi Vincom, yes i have already read the article. the main reason im flashing the rom is because of the hidden DATA icon in the toggle screen. and also i want my phone to have the OREO update as well. this is my first samsung phone. i have experience in flashing ROMs in my xiaomi redmi 1s phone. so im a bit skeptical if i can do this on my own. this odin process is very new to me. so what is the worst thing that can happen it i brick my phone? can i do a hard reset and will it default to the stock AT&T ROM if ever?
Click to expand...
Click to collapse
odin is as easy as it gets, its made for samsung phones.
safe is to do nothing if ur happy as is.
NEVER EVER USE THE "PIT" OPTION UNLESS DIRECTIONS SAY SO IN XDA FORUM ONLY
read/watch vids on using odin
make a backup by using adb, search for this method, and a twrp nandroid
always make a backup, and never just one, and save them somewhere safe in multiple locations and clouds, hard drives die all the time

vincom said:
odin is as easy as it gets, its made for samsung phones.
safe is to do nothing if ur happy as is.
read/watch vids on using odin
make a backup by using adb, search for this method, and a twrp nandroid
always make a backup, and never just one, and save them somewhere safe in multiple locations and clouds, hard drives die all the time
Click to expand...
Click to collapse
Thanks again, ill watch some youtube videos first and if i feel confident enough then i will go thru with this. will keep you posted.
---------- Post added at 09:58 AM ---------- Previous post was at 09:36 AM ----------
rhayann77 said:
Thanks again, ill watch some youtube videos first and if i feel confident enough then i will go thru with this. will keep you posted.
Click to expand...
Click to collapse
Vincom, by the way this Oreo update has nothing to do with my CSC right? i just check its G935AATT4BQK2. my device model is SM-935A

rhayann77 said:
Vincom, by the way this Oreo update has nothing to do with my CSC right? i just check its G935AATT4BQK2. my device model is SM-935A
Click to expand...
Click to collapse
yes and no, csc controls what bloatware and which settings are setup by default dependant on carrier and country, hence why this is a universal fw and not dependant on original csc files.
if u truly have the att s7edge g935a, which is what i had, then yes.

vincom said:
yes and no, csc controls what bloatware and which settings are setup by default dependant on carrier and country, hence why this is a universal fw and not dependant on original csc files.
if u truly have the att s7edge g935a, which is what i had, then yes.
Click to expand...
Click to collapse
Thanks for the clarification. the download path keeps on failing on me for some reason. i already downloaded 1.8G or maybe its my internet speed perhaps?

rhayann77 said:
Thanks for the clarification. the download path keeps on failing on me for some reason. i already downloaded 1.8G or maybe its my internet speed perhaps?
Click to expand...
Click to collapse
could be android file host is having issues today
or u can try ur luck with sammobile.com which is where i initially got the file
edit. ya, i just tried, issues on their end

vincom said:
could be android file host is having issues today
or u can try ur luck with sammobile.com which is where i initially got the file
edit. ya, i just tried, issues on their end
Click to expand...
Click to collapse
i finally finished downloading the zip file earlier. i will flash it later after i go home from work. and one other thing i need to make sure. with this Oreo rom, the DATA connection icon will be available in the toggle screen right?

@vincom, this Oreo rom has already the DATA icon to be toggled on/off right? this is one of the reason i want to flash the att rom as well.

vincom said:
most answers to questions are linked in the op
MORE ABOUT UNIVERSAL FW READ THIS
Click to expand...
Click to collapse
I did read all of it but your description was vague on the att part so I didnt know if you modified it which it sounds like its just the 935u firmware and Im not a newb n00b

@vincom, initially got an error sha256 when i started to flash it. and my phone started to boot loop after i use a different odin, the prince odin. but after some searching. i fount out i just need to use the newer patch version of odin - Odin3 v3.13.1_3B_PatcheD and now im running Oreo on my s7 edge. hopefully this can help others too.

rhayann77 said:
@vincom, initially got an error sha256 when i started to flash it. and my phone started to boot loop after i use a different odin, the prince odin. but after some searching. i fount out i just need to use the newer patch version of odin - Odin3 v3.13.1_3B_PatcheD and now im running Oreo on my s7 edge. hopefully this can help others too.
Click to expand...
Click to collapse
did u try the one i have in the op, Odin3_v3.13.1.zip

vincom said:
did u try the one i have in the op, Odin3_v3.13.1.zip
Click to expand...
Click to collapse
yup i tried that one the first time. thats when it gave me the error message sha256. then i tried the prince odin that gave me the error mmc something.

The author claims performance and battery improvements but has anyone that switched over really noticed that big of a improvement?
I mean i already disabled all the carrier bloat with adhell isn't that basically the same as installing this rom? Does the universal maybe have a different kernal/different system level tweaks?

Bro , what will happen if my unlocked at&t s7edge installing this ? Is there sim will be locked again or not ? Thanks in advance and sorry for my bad english...

Rifuki18 said:
Bro , what will happen if my unlocked at&t s7edge installing this ? Is there sim will be locked again or not ? Thanks in advance and sorry for my bad english...
Click to expand...
Click to collapse
will not change your current sim lock status, no fw exists that would change it

Thanks
Thanks a lot, this firmware works for me with the 3b patched odin on the first try.