You will get the KNOX bootloader if you flash this.
YOU CANNOT UNDO THIS, ITS PERMANENT. FLASHING ANYTHING UNOFFICIAL AFTER FLASHING THIS TAR WILL VOID YOUR WARRANTY
Just the NG2 FULL stock tar.
Do NOT rename the tar file. Even though it may be convenient to do so, Odin may fail the md5 check for no reason.
(L720VPUFNG2_L720SPTFNG2_L720VPUFNG2_HOME.tar.md5)
This is NOT ROOTED. Its the original TAR file for people who need an Emergency Recovery for their phones, and dont want to wait hours for it to download from slow file hosts.
Mediafire
Instructions:
1. Download and Extract tar above and download Odin
2. Put phone into download mode (power off, then power button + Volume Down, then volume up when prompted)
3. Open Odin (right click > open as administrator)
4. Load stock tar into the PDA slot
5. Start flashing
6. Grab some popcorn because it will take a while
7. Profit
Is this going to update bootloader into NG2?
Is NG2 bootloader unlocked?
Thank you so much,
will this work on rooted phone?
im looking to put my phone back to unrooted stock. will this flash right on a rooted phone? im guessing it will but just want to make sure.
jam97 said:
Is this going to update bootloader into NG2?
Is NG2 bootloader unlocked?
Thank you so much,
Click to expand...
Click to collapse
Yes this will update you to the new update NG2 and no the bootloader is still locked.
chriseboy said:
im looking to put my phone back to unrooted stock. will this flash right on a rooted phone? im guessing it will but just want to make sure.
Click to expand...
Click to collapse
Yes this will flash right on a rooted phone. The purpose of this is to go back to stock from either rooted or custom rom.
Sent from my SPH-L720
ROMANTiC KiD said:
Yes this will update you to the new update NG2 and no the bootloader is still locked.
Yes this will flash right on a rooted phone. The purpose of this is to go back to stock from either rooted or custom rom.
Sent from my SPH-L720
Click to expand...
Click to collapse
sorry for this stupid question , but will I be able to flash a custom recovery after flashing this image?
Thank you,
Sent from my SPH-L720 using XDA Free mobile app
jam97 said:
sorry for this stupid quastion , but will I be able to flash a custom recovery after flashing this image?
Thank you,
Sent from my SPH-L720 using XDA Free mobile app
Click to expand...
Click to collapse
You will need to re-root the phone after installing this file! Then you will be able to install a custom recovery..
Thanks for putting this on a speedy host. I just downloaded it tonight in under half an hour at my daughter's house, and she doesn't have a particularly fast internet connection.
A quick question - does this file leave your programs intact? Sometimes I like a total wipe (except for my SD card), and start fresh.
Thanks again
my wifi is broken after flashing. won't turn on
rtwrobert10 said:
my wifi is broken after flashing. won't turn on
Click to expand...
Click to collapse
same problem let me know if you find how to fix it
rtwrobert10 said:
my wifi is broken after flashing. won't turn on
Click to expand...
Click to collapse
biscojams said:
same problem let me know if you find how to fix it
Click to expand...
Click to collapse
Reflash it again
Sent from my SPH-L720
rtwrobert10 said:
my wifi is broken after flashing. won't turn on
Click to expand...
Click to collapse
biscojams said:
same problem let me know if you find how to fix it
Click to expand...
Click to collapse
ROMANTiC KiD said:
Reflash it again
Sent from my SPH-L720
Click to expand...
Click to collapse
Same here, I wiped then installed twice, no wifi. I'll try one more time,
DAFTEK said:
Same here, I wiped then installed twice, no wifi. I'll try one more time,
Click to expand...
Click to collapse
Try flashing the ng2 kernel after the install. Thru custom recovery.
https://www.androidfilehost.com/?fid=23622183712458388
Thanks to @ g_ding84
DAFTEK said:
Same here, I wiped then installed twice, no wifi. I'll try one more time,
Click to expand...
Click to collapse
That's odd.
I have installed this NG2 tar file with Odin on 2 different phones and WiFi works perfect on both..
2WhiteWolves said:
Try flashing the ng2 kernel after the install. Thru custom recovery.
https://www.androidfilehost.com/?fid=23622183712458388
Thanks to @ g_ding84
Click to expand...
Click to collapse
Thanks for the reply. I did try one more time and this time I went back in recovery and did the two wipes, went back in to download, opened odin3 3.09 via administrator and removed the auto reboot check. after it finished i manually rebooted and wifi worked.
---------- Post added at 10:06 PM ---------- Previous post was at 10:02 PM ----------
Now I have another problem. I am no longer with sprint and my phone is unlocked from sprint. I have been using the GOLDENEYE rom on Walmart Family Mobile and all was warning well except for sometimes not connecting calls so I thought i go back to stock with this rom. Problem now is I can make calls with the Walmart sim card, put in the APN settings but i am unable to remove the Hands Free Activation nagging.. Is there anyway to make it go away?
DAFTEK said:
[/COLOR]Now I have another problem. I am no longer with sprint and my phone is unlocked from sprint. I have been using the GOLDENEYE rom on Walmart Family Mobile and all was warning well except for sometimes not connecting calls so I thought i go back to stock with this rom. Problem now is I can make calls with the Walmart sim card, put in the APN settings but i am unable to remove the Hands Free Activation nagging.. Is there anyway to make it go away?
Click to expand...
Click to collapse
Have you tried to pull down the notification bar with two fingers > long press on Hands Free icon to see if something is turned on to make it show up on notification bar? If turned on, shut it off. Hopefully it is that simple. If not that simple, I have no clue how to make it stop. Maybe someone else does.
I haven't heard of anyone having that problem.
Yeah, I tried everything, it's part of the rom I think, nothing worked to make it go away..
I just went back to goldeneye rom, all working perfect again. Thanks.
I just flashed this rom through odin and it didn't wipe any of my programs, isn't is supposed to?
RTbar said:
I just flashed this rom through odin and it didn't wipe any of my programs, isn't is supposed to?
Click to expand...
Click to collapse
+1
also I confirm that everything is working great.
RTbar said:
I just flashed this rom through odin and it didn't wipe any of my programs, isn't is supposed to?
Click to expand...
Click to collapse
Nope. it doesn't wipe data unless stated by the OP that it does. It only restores any apps deleted, or reverses any mods made. Example if you are running Aosp and Odin back to stock. You will get bootloop. After Odin always go to stock recovery and do a factory reset to have a clean install.
Sent from my SPH-L720
Wifi didn't work for me on this rom, coming from a custom mf9 rom. So I odin mf9 bootloader package, and then flashed stock mf9 odexed rooted rom, then odin the mf9 kernel. And did NG2 upgrade through Kies. Now Wi-Fi finally works for me but it's impossible to root. But at least now I got everything working, when I get off of work I can flash the OP version of NG2 cuz at least I could root that 1.
Related
Alright guys i have searched and tried and tried. Currently i am on dj11 with kernal version stated as 2.6.32.9 and right below it has [email protected]#3. I am on 2.2
So what ive tried:
-I used heimdall to flash back to stock but as you can see the kernal version says im still rooted although superuser app is not installed. This causes the update to fail
-I tried to use superoneclick method to unroot but it does not work
What i want is to be stock with no root and be able to update. Any help or suggestions would be appreciated.
FYI i also used all the thread procedures on the forum (gizmo ninja and how to unbrick tab)
Try using this stock unrooted rom. Link below:
http://forum.xda-developers.com/showthread.php?t=1136587
TabFreak said:
Try using this stock unrooted rom. Link below:
http://forum.xda-developers.com/showthread.php?t=1136587
Click to expand...
Click to collapse
i believe i tried that already and it still had the words "rooted" under the kernal version. It also didnt allow me to update. I will try it again.
Try this instead.
http://forum.xda-developers.com/showthread.php?t=1033586
The second link takes you to the files.
TabFreak said:
Try this instead.
http://forum.xda-developers.com/showthread.php?t=1033586
The second link takes you to the files.
Click to expand...
Click to collapse
Will try now. Ahh I hope this works!
killerapl said:
Will try now. Ahh I hope this works!
Click to expand...
Click to collapse
Flashed and guess what?? Didnt work. Kernal version still says 2.6.32.9 [email protected] Ugh!!!
Don't know what the problem could be. That has always worked for me. If you go to the "System-- About Device-- System Updates" does it give you the option to update? When I have restocked mine and set up a wireless connection it always tries to download and install the update.
TabFreak said:
Don't know what the problem could be. That has always worked for me. If you go to the "System-- About Device-- System Updates" does it give you the option to update? When I have restocked mine and set up a wireless connection it always tries to download and install the update.
Click to expand...
Click to collapse
Yeah it does. Goes halfway and then stops and has exclamation mark. I tried gizmoninjas method to update but still quits. I'm totally lost.
Sent from my SCH-I510 using XDA App
I don't know what to do. If it were me I would go ahead and grab the EC02 update from here: http://www.blackmugmedia.com/Android/GT/Mirror/Roms/CDMA/Recovery to Stock /
Flash that. You will have the latest official release, or you could get the VZW Leaked Gingerbread release from the Developers section. (That is what I am running on my VZW tab).
Maybe if you flashed the EC02 update and then used the going back to stock instructions it would unroot you. I have always unrooted using that rom and directions when I wanted to start fresh from a custom rom that didn't quite work like I wanted it to work.
TabFreak said:
I don't know what to do. If it were me I would go ahead and grab the EC02 update from here: http://www.blackmugmedia.com/Android/GT/Mirror/Roms/CDMA/Recovery to Stock /
Flash that. You will have the latest official release, or you could get the VZW Leaked Gingerbread release from the Developers section. (That is what I am running on my VZW tab).
Maybe if you flashed the EC02 update and then used the going back to stock instructions it would unroot you. I have always unrooted using that rom and directions when I wanted to start fresh from a custom rom that didn't quite work like I wanted it to work.
Click to expand...
Click to collapse
I will give that a shot. The current gb leak is rooted. I did post asking to see if they (oldmacnut) had the unrooted version. Personally I like the rooted option but I do want to sell the tab and can't sell it rooted unless the person doesn't care. Bedside this issue the tab is fine and working properly.
Thank you so much for all your help. I will keeep you posted on the outcome.
Nope didn't work. Still rooted. I'm so over this hahah
Sent from my SCH-I510 using XDA App
I am at a loss. I know there are ways to get this done, but I have no idea where you can go from here. Not an expert, sorry!
TabFreak said:
I am at a loss. I know there are ways to get this done, but I have no idea where you can go from here. Not an expert, sorry!
Click to expand...
Click to collapse
There has to be. Wish it was like my Droid charge and just flash via Odin. If I can get the ginerbreak leak with no root I will be happy.
Or sell it to someone that doesn't mind its rooted.
Sent from my SCH-I510 using XDA App
There is a unrooted version of Gingerbread that you can flash with Odin:
http://www.mydroidworld.com/forums/...w-sprint-2-3-4-ef01-rooted-updated8-15-a.html
I haven't used Odin, but if you are familiar with it you might have luck with this. I think you use 7zip to extract and then use the resulting md5 file in the One Package location. You might want to look there and get that file.
TabFreak said:
There is a unrooted version of Gingerbread that you can flash with Odin:
http://www.mydroidworld.com/forums/...w-sprint-2-3-4-ef01-rooted-updated8-15-a.html
I haven't used Odin, but if you are familiar with it you might have luck with this. I think you use 7zip to extract and then use the resulting md5 file in the One Package location. You might want to look there and get that file.[/QU
I'm gonna give it a try tomorrow. I just have to make sure if I flash under phone or PDA with Odin. Don't know if you know. For phones its PDA. Not sure with tabs. Thank you so much
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
I just tried this.
Unzip the .md5 file with 7zip, you will get an error about no proper ending or something. Take your zimage, cache, param, dbdata, factoryfs, recovery.bin and place them in the proper locations in Heimdall. Flash your tab and let it boot up.
You should have a fully functional gingerbread without root.
I just did it on my tab.
TabFreak said:
I just tried this.
Unzip the .md5 file with 7zip, you will get an error about no proper ending or something. Take your zimage, cache, param, dbdata, factoryfs, recovery.bin and place them in the proper locations in Heimdall. Flash your tab and let it boot up.
You should have a fully functional gingerbread without root.
I just did it on my tab.
Click to expand...
Click to collapse
You effin rock!!! It worked! I now have non rooted stock gingerbread. Thank you for all your help and investigation for the right files. Youre awesome. Now time to sell this baby
Or i spent so much time doing this i think im attached now hahaha
Glad it worked the way you wanted. I went back to the rooted version of Gingerbread. Everything works the way I want it to so no reason to change (for now anyway).
Here is my presentiment that I've posted elsewhere
My phone was working just fine this morning but after updating a few apps through Google Play my phone started throwing up messages that gapps process was continuously crashing.
I then restarted the phone and it would not get to the AT&T startup. I have since flashed the OC1 kernel through SafeStrap but now the phone will not leave the AT&T startup logo.
Any ideas for what I can do? I have an older backup but not on 5.0 like I should. If need be I'll be going through the entire reinstallation process of 5.0 again.
EDIT: Just realized that I have a bigger problem now since I cannot access SafeStrap Recovery.
Click to expand...
Click to collapse
I need some help with ODIN to get it back to stock. As you can see, I cannot get to SafeStrap anymore. Would it be alright to ODIN to Lollipop or do i need to go to 4.4.4? Anything I need to keep in mind before doing this? I just need to get to SafeStrap and I can get to some backups that I have.
orangetag001 said:
Here is my presentiment that I've posted elsewhere
I need some help with ODIN to get it back to stock. As you can see, I cannot get to SafeStrap anymore. Would it be alright to ODIN to Lollipop or do i need to go to 4.4.4? Anything I need to keep in mind before doing this? I just need to get to SafeStrap and I can get to some backups that I have.
Click to expand...
Click to collapse
You need to Odin flash the NC2 Kernel to get Safestrap to work http://forum.xda-developers.com/attachment.php?attachmentid=2800888&stc=1&d=1402892555 then you should be able to wipe and install one of your backups. OR if you want to Odin to Lollipop http://forum.xda-developers.com/note-3-att/general/update-procedure-lollipop-5-0-oc1-t3063760. :good:
Rooted i747 said:
You need to Odin flash the NC2 Kernel to get Safestrap to work http://forum.xda-developers.com/attachment.php?attachmentid=2800888&stc=1&d=1402892555 then you should be able to wipe and install one of your backups. OR if you want to Odin to Lollipop http://forum.xda-developers.com/note-3-att/general/update-procedure-lollipop-5-0-oc1-t3063760. :good:
Click to expand...
Click to collapse
Thanks a ton for the reply! I appreciate it immensely.
I'll go through those steps tonight and report back.
Rooted i747 said:
You need to Odin flash the NC2 Kernel to get Safestrap to work http://forum.xda-developers.com/attachment.php?attachmentid=2800888&stc=1&d=1402892555 then you should be able to wipe and install one of your backups. OR if you want to Odin to Lollipop http://forum.xda-developers.com/note-3-att/general/update-procedure-lollipop-5-0-oc1-t3063760. :good:
Click to expand...
Click to collapse
So I have the kernel you linked downloaded and unzipped. Within Odin 3.10 do I want to place that md5 file under the "Re-Partition" entry?
orangetag001 said:
So I have the kernel you linked downloaded and unzipped. Within Odin 3.10 do I want to place that md5 file under the "Re-Partition" entry?
Click to expand...
Click to collapse
Place it in the AP slot.
Rooted i747 said:
Place it in the AP slot.
Click to expand...
Click to collapse
Just to be safe. This look correct? I have my computer in Japanese locale so that's why the /'s turn out that way
orangetag001 said:
Just to be safe. This look correct? I have my computer in Japanese locale so that's why the /'s turn out that way
Click to expand...
Click to collapse
Looks good!:good:
Rooted i747 said:
Looks good!:good:
Click to expand...
Click to collapse
YOU ARE THE MAN, MAN! Booted into it right away after it was finished!
Rooted i747 said:
Looks good!:good:
Click to expand...
Click to collapse
I know you're probably sick of me posting but would I have to ODIN flash a different kernel to get Safestrap access on Lollipop? For some reason once I updated the startup prompt for Safestrap disappeared.
orangetag001 said:
I know you're probably sick of me posting but would I have to ODIN flash a different kernel to get Safestrap access on Lollipop? For some reason once I updated the startup prompt for Safestrap disappeared.
Click to expand...
Click to collapse
Yes you would have to flash the NC2 Kernel then after you are done with Safestrap you need to flash the OC1 Kernel. To access Safestrap without Odin you would need to install the NC2 Flasher from here http://forum.xda-developers.com/note-3-att/development/nc2-flasher-app-unsafe-t2989141/ plus you need the two (2) files from here http://forum.xda-developers.com/note-3-att/general/att-nj5-safestrap-t2957471 Thanks @benwaffle and Thanks @carl1961.
Without Odin https://youtu.be/yIjb0AiZOd4
---------- Post added at 03:20 PM ---------- Previous post was at 03:16 PM ----------
Without Odin https://youtu.be/yIjb0AiZOd4
Hey guys I create this section for people interested root device s6 , anybody get root for phone please share way for people because I can't used phone without root
I have questions, how to make root ,what's file need to edit , what is kernel.....
Thanks
Have you updated to 5.1.1 yet?
fixy32 said:
Hey guys I create this section for people interested root device s6 , anybody get root for phone please share way for people because I can't used phone without root
I have questions, how to make root ,what's file need to edit , what is kernel.....
Thanks
Click to expand...
Click to collapse
Ya there's root already for 5.1.1.
Go to the unified dev section for GS6 and grab the unified kernel. You'll need to unlock bootloader first in dev options then flash the latest TRWP recovery in Odin. Then flash the kernel and you'll have root.that's the version, so take a look at the details before flashing.
Sent from my SM-G920T using Tapatalk
Yes, He is correct! I followed the instruction and have root on my sm-g920t......awesome!
jzero88 said:
Ya there's root already for 5.1.1.
Go to the unified dev section for GS6 and grab the unified kernel. You'll need to unlock bootloader first in dev options then flash the latest TRWP recovery in Odin. Then flash the kernel and you'll have root.that's the version, so take a look at the details before flashing.
Sent from my SM-G920T using Tapatalk
Click to expand...
Click to collapse
Please share url for the wtrp recovery I'm on 5.1.1 stock
Thanks
fixy32 said:
Please share url for the wtrp recovery I'm on 5.1.1 stock
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...d-development/kernel-stockmod-kernel-t3100395
download the kernel. put phone into download mode. open odin. click ap, select kernel file. click start. fixed.
Im on 5.1.1 and I tried rooting today, got stuck in boot loop. This fixed it right away and now I am rooted.
hope it helps.
Anyone have the stock OF6 G920T kernel, maybe TWRP flashable?
id10terrordfw said:
Anyone have the stock OF6 G920T kernel, maybe TWRP flashable?
Click to expand...
Click to collapse
I just uploaded the tar
https://www.androidfilehost.com/?fid=24052804347771401
i rooted my t-mo s6 with the above method, but the phone feature broke... can't hear the person i'm calling at all. i'm not sure if the mic is broke since i cannot hear the person on the other end...
i should have kept the phone on 5.0.2 @[email protected]
I finally have root, TWRP, call audio and data without tripping knox on my stock GS6 5.1.1. I didn't think it was possible. Am I wrong? Has this been done already and I'm just late to the game?
please share the method you used, because when i root my s6 on 5.1.1, i get no call audio...
I'm wondering if it's even worth rooting this phone. Setup wise I was able to disable and hide all bloatware with a $1.50 app. If I could get xposed working with temp root. I'd be a happy camper.
Sent from my SM-G920T using XDA Free mobile app
dnaL0R said:
please share the method you used, because when i root my s6 on 5.1.1, i get no call audio...
Click to expand...
Click to collapse
I installed the engineering sboot in download mode with odin, then allowed to restart rom, booted back to download mode, then v3 of the unified Kernel for sm-920T in download mode with odin, booted the rom, back up my efs, installed TWRP v12 (g925t_of6_aou_twrp_recovery_v12) with Flashify, rebooted into download mode and flashed g920t_of6_aou_kernel_v1.tar kernel.
I did get the security manager prompt after the restart but there is a way to freeze that prompt with Titanium Back up. I'm looking for that now
Are you sure you still haven't tripped Knox?
GeorgeNYer said:
Are you sure you still haven't tripped Knox?
Click to expand...
Click to collapse
Just checked. KNOX WARRANTY VOID: 0 (0×0000) is what it shows. I installed a custom rom (Xtrestolite) and all I needed to do was reflash the second kernel again to get audio back. Fingerprint is the only thing that isn't working so far.
I can post an image of the bootloader screen if you'd like.
jabreu203 said:
Just checked. KNOX WARRANTY VOID: 0 (0×0000) is what it shows. I installed a custom rom (Xtrestolite) and all I needed to do was reflash the second kernel again to get audio back. Fingerprint is the only thing that isn't working so far.
I can post an image of the bootloader screen if you'd like.
Click to expand...
Click to collapse
I tried it myself and I can confirm it works. Thanks you! And I thumbprint scanner also doesn't work for me but I guess I can wait for that fix
GeorgeNYer said:
I tried it myself and I can confirm it works. Thanks you! And I thumbprint scanner also doesn't work for me but I guess I can wait for that fix
Click to expand...
Click to collapse
Please hit the "Thank you" button if it works for you. You are very welcome. Glad that it worked for you.
GeorgeNYer said:
I tried it myself and I can confirm it works. Thanks you! And I thumbprint scanner also doesn't work for me but I guess I can wait for that fix
Click to expand...
Click to collapse
Fingerprint scanner won't work cause that bootloader is a 5.0.2 bootloader.
jabreu203 said:
I installed the engineering sboot in download mode with odin, then allowed to restart rom, booted back to download mode, then v3 of the unified Kernel for sm-920T in download mode with odin, booted the rom, back up my efs, installed TWRP v12 (g925t_of6_aou_twrp_recovery_v12) with Flashify, rebooted into download mode and flashed g920t_of6_aou_kernel_v1.tar kernel.
I did get the security manager prompt after the restart but there is a way to freeze that prompt with Titanium Back up. I'm looking for that now
Click to expand...
Click to collapse
great job, thanks! could you please make a new post in general to increase visibility?
Remix22 said:
great job, thanks! could you please make a new post in general to increase visibility?
Click to expand...
Click to collapse
Since Sammy issued a DMCA for the sboot, that's probably not a good idea
I had a custom ROM till sunday because I lost wifi, so I flash another rom same issu, did a restore and got back to factory state and wifi started workign again, I just unlock the booatloader to do a root and again no wifi, any ideas (Nexus Sprint)
lordtinuviel said:
I had a custom ROM till sunday because I lost wifi, so I flash another rom same issu, did a restore and got back to factory state and wifi started workign again, I just unlock the booatloader to do a root and again no wifi, any ideas (Nexus Sprint)
Click to expand...
Click to collapse
Reboot your router. Bootloader should have no effect on WiFi.
Evolution_Tech said:
Reboot your router. Bootloader should have no effect on WiFi.
Click to expand...
Click to collapse
its not the router, I cant get the wifi enable on the phone
any ideas? Im going to root again the device and load a different to see if it makes any difference
lordtinuviel said:
any ideas? Im going to root again the device and load a different to see if it makes any difference
Click to expand...
Click to collapse
As @Evolution_Tech told you, bootloader unlock has absolutely no effect on WiFi. Whatever you do to solve this problem, DO NOT RELOCK YOUR BOOTLOADER!
And the fact that your WiFi works on stock ROM, but not custom ROM, tells us something (I'm just not sure what).
Well, I'm not saying that the relocked cause the issue, I'm just saying what I have done before it started happening in fact just saw another thread that is having the same problem...last night I l rooted again the and again no WiFi, so I got back to stock and guess what no WiFi , so something is wrong
BTW my phone rebooted itself and now I have WiFi again...this is really weird
Out of interest, what do you mean by "no wifi"? That's not a helpful description of the problem.
ok WiFi option wont turn on, it hangs and never get activated
its a problem of error in files consisting in "persist" folder that are responsible for wifi
reflash stock rom
maheshmaf said:
its a problem of error in files consisting in "persist" folder that are responsible for wifi
reflash stock rom
Click to expand...
Click to collapse
ok, any reason why it get corrupted?
Ok \, I reload the factory Image and got wireless working, but I just unlock and root and flash CyanideL and again, no wireless, any ideas?
lordtinuviel said:
Ok \, I reload the factory Image and got wireless working, but I just unlock and root and flash CyanideL and again, no wireless, any ideas?
Click to expand...
Click to collapse
Probably should test immediately after unlock and root.
lordtinuviel said:
Ok \, I reload the factory Image and got wireless working, but I just unlock and root and flash CyanideL and again, no wireless, any ideas?
Click to expand...
Click to collapse
Well, your experiments point to the ROM. I'd suggest restore your backup of stock, get WiFi working again. Then try a different ROM.
cam30era said:
Well, your experiments point to the ROM. I'd suggest restore your backup of stock, get WiFi working again. Then try a different ROM.
Click to expand...
Click to collapse
That's what I did, still having he issue
Sent from my iPad using Tapatalk
I just want to have wifi working again using a custom rom
Sent from my iPad using Tapatalk
lordtinuviel said:
I just want to have wifi working again using a custom rom
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
If it works on stock, rooted... That's what you need to confirm.
Ensure you full wipe when flashing a custom rom. Try another rom and don't let google download or restore any setting during set up of the new rom.
danarama said:
If it works on stock, rooted... That's what you need to confirm.
Ensure you full wipe when flashing a custom rom. Try another rom and don't let google download or restore any setting during set up of the new rom.
Click to expand...
Click to collapse
going to do it again now
this time, stock did not bring wifi back...any idea?
lordtinuviel said:
this time, stock did not bring wifi back...any idea?
Click to expand...
Click to collapse
Post #10. Corrupted again.
**You can begin the following process from any Build but you must already have Root Access**
**Required** [root] FlashFire
Download:
- G930T_PG1_Stock_DeOdexed_Debloated_ROM.zip
1. Place the ROM onto your device (use either internal or ext-sdcard).
2. Open the FlashFire app, grant root access, and "Agree" to the Terms and Conditions.
3. Press "(+)" twice to bring up the "Actions" menu.
4. Press "Flash Zip or OTA" and locate and select the ROM. Use the default settings under the "Options" menu and press the checkmark to continue.
5. From the main menu Uncheck all options under "EverRoot" and set "Reboot" to "Download."
6. Press the lightning bolt then "Ok" to begin the flash . The screen will turn black then display the contents of your system before beginning the flash. FlashFire will pause for about 1 minute while flashing the "system" partition.
7. Once the flash is complete and the device reboots into "Download" mode, flash the G930T_PG1_Stock_Modem_Recovery_Bootloader.tar.md5 using Odin's AP slot. The device will take 10 - 15 mins for the first boot!
8. To regain root access, re-run "root.bat" once the device has fully rebooted. Make certain usb debugging is enabled. Enjoy!
Tip: for blazing fast speed turn off animations from Developer Options and reboot!
Notes:
1. The above process will not affect your Knox Warranty Flag.
2. The above process will update your Modem, Non-hlos, System, Bootloader, and Stock Recovery.
3. The ROM will automatically wipe all User Data!
4. Follow this guide if you do not already have root access: http://forum.xda-developers.com/att-galaxy-s7/how-to/root-s7-att-g930a-g935a-t3410538
Congrats on the first G920T ROM! Any way to do this withOUT wiping user data?
seanvree said:
Congrats on the first G920T ROM! Any way to do this withOUT wiping user data?
Click to expand...
Click to collapse
Thx. Use FlashFire's backup function to backup your data then restore after updating.
Sent from my SM-G930T using XDA-Developers mobile app
Nice! Thanks!
First off thanks for posting the first rom in this section. I just wanted to ask if this runs at the speed of the stock s7 or does it lag and delay like mine is now after rooting and applying the fixes?
veritasaequita said:
First off thanks for posting the first rom in this section. I just wanted to ask if this runs at the speed of the stock s7 or does it lag and delay like mine is now after rooting and applying the fixes?
Click to expand...
Click to collapse
Others will have to share their thoughts on that. I am running pure stock w/out root. But debloated, deodexed ROM'S usually run a little faster than pure stock.
muniz_ri said:
Thx. Use FlashFire's backup function to backup your data then restore after updating.
Sent from my SM-G930T using XDA-Developers mobile app
Click to expand...
Click to collapse
If I use flash fire. What are all the items o want to back up for user data only ? I want to make sure I don't restore anything that will mess with this ROM. Thanks!
Sent from my SM-G930T using XDA Free mobile app
THANK YOU, will try as soon as I charge my phone and I will post updates.
Running amazing, definitely faster then stick rooted, only issue I'm having is when trying to make a call it takes a few seconds to connect :/ tried disabling Volte didn't make a difference
This rom is a phenomenal start. It is atleast as fast as stock s7 and runs circles around a fresh rooted one. As stated above the only thing I did notice was some weird calling issue but what cleared that up for me was dialer/settings/ turn off volte and also turn off wifi calling. The wifi calling had to be tricked into turning off as the regular wifi calling in settings was grayed out but I was able to get it in the dialer section. Thanks for a great start!
Will this unlock bootloader ?
Demonith said:
Will this unlock bootloader ?
Click to expand...
Click to collapse
Don't think so
Demonith said:
Will this unlock bootloader ?
Click to expand...
Click to collapse
Nope. Still not possible with us variants. And prob never will.
Sent from my SM-G930T using XDA Free mobile app
---------- Post added at 10:25 PM ---------- Previous post was at 10:25 PM ----------
Great job on this ROM! Have everything set up and it's blazing fast. Pop your PayPal buddy. I'd like to buy you a beer.
Sent from my SM-G930T using XDA Free mobile app
Hey, I also found this weird problem, may NOT be with this ROM, but I've never seen it before. Whenever I try to change the permissions of any app, I get this error. SO, I have to go thru and disable every app before I can change ANY app's permissions. VERY annoying. Anyone have a workaround?
seanvree said:
Hey, I also found this weird problem, may NOT be with this ROM, but I've never seen it before. Whenever I try to change the permissions of any app, I get this error. SO, I have to go thru and disable every app before I can change ANY app's permissions. VERY annoying. Anyone have a workaround?
Click to expand...
Click to collapse
I could be wrong but im pretty sure that the supersu chainfire released today should fix that for you.
https://download.chainfire.eu/970/SuperSU/SuperSU-v2.76-S7QC.zip
veritasaequita said:
I could be wrong but im pretty sure that the supersu chainfire released today should fix that for you.
https://download.chainfire.eu/970/SuperSU/SuperSU-v2.76-S7QC.zip
Click to expand...
Click to collapse
This one doesn't' work, Make sure to get the latest from here:
https://download.chainfire.eu/969/SuperSU/
F*CK! Don't do this! I just bricked my phone!!!
I used the new UPDATE and flashed via flashfire, it rebooted, now I get the error: "Security error: This phone has been flashed with unauthorized software & is locked"
Anyone know what to do?
seanvree said:
How do we flash this? I put the .zip on my SD card and tried Flashfire but it doesn't see the zip....Weird.
Click to expand...
Click to collapse
I extracted a APK file out of there and just installed it normally. Hope that helps
Just odin flash the stock PG1 .tar files.
You may also want to remove that link to the regular SuperSU.zip. People should only use the special SuperSU version made for use with adb.
veritasaequita said:
I could be wrong but im pretty sure that the supersu chainfire released today should fix that for you.
https://download.chainfire.eu/970/SuperSU/SuperSU-v2.76-S7QC.zip
Click to expand...
Click to collapse
muniz_ri said:
Just odin flash the stock PG1 .tar files.
You may also want to remove that link to the regular SuperSU.zip. People should only use the special SuperSU version made for use with adb.
Click to expand...
Click to collapse
Okay, I've never done this before. what slot am I using in Odin? where do I get the PG1.Tar files?
seanvree said:
Okay, I've never done this before. what slot am I using in Odin? where do I get the PG1.Tar files?
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/database/SM-G930T/
The zip will have all the tar files,, and it will be obvious where they go when unzipped.