Database Develop

[ROM][TAR] Stock NG2 Odin flashable

You will get the KNOX bootloader if you flash this.
YOU CANNOT UNDO THIS, ITS PERMANENT. FLASHING ANYTHING UNOFFICIAL AFTER FLASHING THIS TAR WILL VOID YOUR WARRANTY​
Just the NG2 FULL stock tar.
Do NOT rename the tar file. Even though it may be convenient to do so, Odin may fail the md5 check for no reason.
(L720VPUFNG2_L720SPTFNG2_L720VPUFNG2_HOME.tar.md5)
This is NOT ROOTED. Its the original TAR file for people who need an Emergency Recovery for their phones, and dont want to wait hours for it to download from slow file hosts.
Mediafire
Instructions:
1. Download and Extract tar above and download Odin
2. Put phone into download mode (power off, then power button + Volume Down, then volume up when prompted)
3. Open Odin (right click > open as administrator)
4. Load stock tar into the PDA slot
5. Start flashing
6. Grab some popcorn because it will take a while
7. Profit

Is this going to update bootloader into NG2?
Is NG2 bootloader unlocked?
Thank you so much,

will this work on rooted phone?
im looking to put my phone back to unrooted stock. will this flash right on a rooted phone? im guessing it will but just want to make sure.

jam97 said:
Is this going to update bootloader into NG2?
Is NG2 bootloader unlocked?
Thank you so much,
Click to expand...
Click to collapse
Yes this will update you to the new update NG2 and no the bootloader is still locked.
chriseboy said:
im looking to put my phone back to unrooted stock. will this flash right on a rooted phone? im guessing it will but just want to make sure.
Click to expand...
Click to collapse
Yes this will flash right on a rooted phone. The purpose of this is to go back to stock from either rooted or custom rom.
Sent from my SPH-L720

ROMANTiC KiD said:
Yes this will update you to the new update NG2 and no the bootloader is still locked.
Yes this will flash right on a rooted phone. The purpose of this is to go back to stock from either rooted or custom rom.
Sent from my SPH-L720
Click to expand...
Click to collapse
sorry for this stupid question , but will I be able to flash a custom recovery after flashing this image?
Thank you,
Sent from my SPH-L720 using XDA Free mobile app

jam97 said:
sorry for this stupid quastion , but will I be able to flash a custom recovery after flashing this image?
Thank you,
Sent from my SPH-L720 using XDA Free mobile app
Click to expand...
Click to collapse
You will need to re-root the phone after installing this file! Then you will be able to install a custom recovery..

Thanks for putting this on a speedy host. I just downloaded it tonight in under half an hour at my daughter's house, and she doesn't have a particularly fast internet connection.
A quick question - does this file leave your programs intact? Sometimes I like a total wipe (except for my SD card), and start fresh.
Thanks again

my wifi is broken after flashing. won't turn on

rtwrobert10 said:
my wifi is broken after flashing. won't turn on
Click to expand...
Click to collapse
same problem let me know if you find how to fix it

rtwrobert10 said:
my wifi is broken after flashing. won't turn on
Click to expand...
Click to collapse
biscojams said:
same problem let me know if you find how to fix it
Click to expand...
Click to collapse
Reflash it again
Sent from my SPH-L720

rtwrobert10 said:
my wifi is broken after flashing. won't turn on
Click to expand...
Click to collapse
biscojams said:
same problem let me know if you find how to fix it
Click to expand...
Click to collapse
ROMANTiC KiD said:
Reflash it again
Sent from my SPH-L720
Click to expand...
Click to collapse
Same here, I wiped then installed twice, no wifi. I'll try one more time,

DAFTEK said:
Same here, I wiped then installed twice, no wifi. I'll try one more time,
Click to expand...
Click to collapse
Try flashing the ng2 kernel after the install. Thru custom recovery.
https://www.androidfilehost.com/?fid=23622183712458388
Thanks to @ g_ding84

DAFTEK said:
Same here, I wiped then installed twice, no wifi. I'll try one more time,
Click to expand...
Click to collapse
That's odd.
I have installed this NG2 tar file with Odin on 2 different phones and WiFi works perfect on both..

2WhiteWolves said:
Try flashing the ng2 kernel after the install. Thru custom recovery.
https://www.androidfilehost.com/?fid=23622183712458388
Thanks to @ g_ding84
Click to expand...
Click to collapse
Thanks for the reply. I did try one more time and this time I went back in recovery and did the two wipes, went back in to download, opened odin3 3.09 via administrator and removed the auto reboot check. after it finished i manually rebooted and wifi worked.
---------- Post added at 10:06 PM ---------- Previous post was at 10:02 PM ----------
Now I have another problem. I am no longer with sprint and my phone is unlocked from sprint. I have been using the GOLDENEYE rom on Walmart Family Mobile and all was warning well except for sometimes not connecting calls so I thought i go back to stock with this rom. Problem now is I can make calls with the Walmart sim card, put in the APN settings but i am unable to remove the Hands Free Activation nagging.. Is there anyway to make it go away?

DAFTEK said:
[/COLOR]Now I have another problem. I am no longer with sprint and my phone is unlocked from sprint. I have been using the GOLDENEYE rom on Walmart Family Mobile and all was warning well except for sometimes not connecting calls so I thought i go back to stock with this rom. Problem now is I can make calls with the Walmart sim card, put in the APN settings but i am unable to remove the Hands Free Activation nagging.. Is there anyway to make it go away?
Click to expand...
Click to collapse
Have you tried to pull down the notification bar with two fingers > long press on Hands Free icon to see if something is turned on to make it show up on notification bar? If turned on, shut it off. Hopefully it is that simple. If not that simple, I have no clue how to make it stop. Maybe someone else does.
I haven't heard of anyone having that problem.

Yeah, I tried everything, it's part of the rom I think, nothing worked to make it go away..
I just went back to goldeneye rom, all working perfect again. Thanks.

I just flashed this rom through odin and it didn't wipe any of my programs, isn't is supposed to?

RTbar said:
I just flashed this rom through odin and it didn't wipe any of my programs, isn't is supposed to?
Click to expand...
Click to collapse
+1
also I confirm that everything is working great.

RTbar said:
I just flashed this rom through odin and it didn't wipe any of my programs, isn't is supposed to?
Click to expand...
Click to collapse
Nope. it doesn't wipe data unless stated by the OP that it does. It only restores any apps deleted, or reverses any mods made. Example if you are running Aosp and Odin back to stock. You will get bootloop. After Odin always go to stock recovery and do a factory reset to have a clean install.
Sent from my SPH-L720

Wifi didn't work for me on this rom, coming from a custom mf9 rom. So I odin mf9 bootloader package, and then flashed stock mf9 odexed rooted rom, then odin the mf9 kernel. And did NG2 upgrade through Kies. Now Wi-Fi finally works for me but it's impossible to root. But at least now I got everything working, when I get off of work I can flash the OP version of NG2 cuz at least I could root that 1.

[Q] Odin and my Note 3

Here is my presentiment that I've posted elsewhere
My phone was working just fine this morning but after updating a few apps through Google Play my phone started throwing up messages that gapps process was continuously crashing.
I then restarted the phone and it would not get to the AT&T startup. I have since flashed the OC1 kernel through SafeStrap but now the phone will not leave the AT&T startup logo.
Any ideas for what I can do? I have an older backup but not on 5.0 like I should. If need be I'll be going through the entire reinstallation process of 5.0 again.
EDIT: Just realized that I have a bigger problem now since I cannot access SafeStrap Recovery.
Click to expand...
Click to collapse
I need some help with ODIN to get it back to stock. As you can see, I cannot get to SafeStrap anymore. Would it be alright to ODIN to Lollipop or do i need to go to 4.4.4? Anything I need to keep in mind before doing this? I just need to get to SafeStrap and I can get to some backups that I have.

orangetag001 said:
Here is my presentiment that I've posted elsewhere
I need some help with ODIN to get it back to stock. As you can see, I cannot get to SafeStrap anymore. Would it be alright to ODIN to Lollipop or do i need to go to 4.4.4? Anything I need to keep in mind before doing this? I just need to get to SafeStrap and I can get to some backups that I have.
Click to expand...
Click to collapse
You need to Odin flash the NC2 Kernel to get Safestrap to work http://forum.xda-developers.com/attachment.php?attachmentid=2800888&stc=1&d=1402892555 then you should be able to wipe and install one of your backups. OR if you want to Odin to Lollipop http://forum.xda-developers.com/note-3-att/general/update-procedure-lollipop-5-0-oc1-t3063760. :good:

Rooted i747 said:
You need to Odin flash the NC2 Kernel to get Safestrap to work http://forum.xda-developers.com/attachment.php?attachmentid=2800888&stc=1&d=1402892555 then you should be able to wipe and install one of your backups. OR if you want to Odin to Lollipop http://forum.xda-developers.com/note-3-att/general/update-procedure-lollipop-5-0-oc1-t3063760. :good:
Click to expand...
Click to collapse
Thanks a ton for the reply! I appreciate it immensely.
I'll go through those steps tonight and report back.

Rooted i747 said:
You need to Odin flash the NC2 Kernel to get Safestrap to work http://forum.xda-developers.com/attachment.php?attachmentid=2800888&stc=1&d=1402892555 then you should be able to wipe and install one of your backups. OR if you want to Odin to Lollipop http://forum.xda-developers.com/note-3-att/general/update-procedure-lollipop-5-0-oc1-t3063760. :good:
Click to expand...
Click to collapse
So I have the kernel you linked downloaded and unzipped. Within Odin 3.10 do I want to place that md5 file under the "Re-Partition" entry?

orangetag001 said:
So I have the kernel you linked downloaded and unzipped. Within Odin 3.10 do I want to place that md5 file under the "Re-Partition" entry?
Click to expand...
Click to collapse
Place it in the AP slot.

Rooted i747 said:
Place it in the AP slot.
Click to expand...
Click to collapse
Just to be safe. This look correct? I have my computer in Japanese locale so that's why the /'s turn out that way

orangetag001 said:
Just to be safe. This look correct? I have my computer in Japanese locale so that's why the /'s turn out that way
Click to expand...
Click to collapse
Looks good!:good:

Rooted i747 said:
Looks good!:good:
Click to expand...
Click to collapse
YOU ARE THE MAN, MAN! Booted into it right away after it was finished!

Rooted i747 said:
Looks good!:good:
Click to expand...
Click to collapse
I know you're probably sick of me posting but would I have to ODIN flash a different kernel to get Safestrap access on Lollipop? For some reason once I updated the startup prompt for Safestrap disappeared.

orangetag001 said:
I know you're probably sick of me posting but would I have to ODIN flash a different kernel to get Safestrap access on Lollipop? For some reason once I updated the startup prompt for Safestrap disappeared.
Click to expand...
Click to collapse
Yes you would have to flash the NC2 Kernel then after you are done with Safestrap you need to flash the OC1 Kernel. To access Safestrap without Odin you would need to install the NC2 Flasher from here http://forum.xda-developers.com/note-3-att/development/nc2-flasher-app-unsafe-t2989141/ plus you need the two (2) files from here http://forum.xda-developers.com/note-3-att/general/att-nj5-safestrap-t2957471 Thanks @benwaffle and Thanks @carl1961.

Without Odin https://youtu.be/yIjb0AiZOd4
---------- Post added at 03:20 PM ---------- Previous post was at 03:16 PM ----------
Without Odin https://youtu.be/yIjb0AiZOd4

[WARNING] YOU CAN'T ROOT or install recovery on T-Mobile S5 to 5.1.1!

This is a [WARNING] Don't flash any other thing after you update Tmobile S5 to 5.1.1!
I have just flashed 5.1.1 and tried to flash CF-AUTOROOT / TWRP / CWM / ANY ROOT OR RECOVERY and I stucked at bootloop while the phone kept on ringing 4times at the T-mobile boot screen.
i think Samsung had changed something to prevent from install recovery or root on S5 in 5.1.1.
We should wait for someone to make 5.1.1 root.
The good news: You are able to downgrade from 5.1.1 to 5.0 or even 4.4 just by flashing previous firmwares using ODIN.
Without any problem. Full service, imei, SV, .... everything's fine.

Try wiping your caches in recovery. Same thing happened to me for 5.0
Sent from my SM-G900T using XDA Free mobile app

thienbrand said:
This is a [WARNING] Don't flash any other thing after you update Tmobile S5 to 5.1.1!
I have just flashed 5.1.1 and tried to flash CF-AUTOROOT / TWRP / CWM / ANY ROOT OR RECOVERY and I stucked at bootloop while the phone kept on ringing 4times at the T-mobile boot screen.
i think Samsung had changed something to prevent from install recovery or root on S5 in 5.1.1.
We should wait for someone to make 5.1.1 root.
Click to expand...
Click to collapse
Try doing what Kevin said. Otherwise reflash the update in Odin, download here or mega mirror.

After I installed Recovery or root, I do full wipe.
But remain the same.
Sent from my SM-G900T using XDA Free mobile app

Kevin or lingo, are you saying it works ok for you?
Sent from my SM-G900F using Tapatalk

A better question, are we able to downgrade after installation of this version?
I seen a screenshot of the S6 update screen and it showed that a downgrade would not be possible.

thienbrand said:
After I installed Recovery or root, I do full wipe.
But remain the same.
Click to expand...
Click to collapse
Try downloading the rom from the link I posted and flash it in odin, if you wan't to get out of bootloop.
pnut22r said:
Kevin or lingo, are you saying it works ok for you?
Click to expand...
Click to collapse
I haven't tried it, my S5 is 900F international. And I don't know the procedure for flashing T-Mobile roms on the 900F.
Maybe we can flash the rom but I'm pretty sure the bootloader and kernel is a no go.

The good news: You are able to downgrade from 5.1.1 to 5.0 or even 4.4 just by flashing previous firmwares using ODIN.
Without any problem. Full service, imei, SV, .... everything's fine.

thienbrand said:
The good news: You are able to downgrade from 5.1.1 to 5.0 or even 4.4 just by flashing previous firmwares using ODIN.
Without any problem. Full service, imei, SV, .... everything's fine.
Click to expand...
Click to collapse
This is good news, thanks!

thienbrand said:
This is a [WARNING] Don't flash any other thing after you update Tmobile S5 to 5.1.1!
I have just flashed 5.1.1 and tried to flash CF-AUTOROOT / TWRP / CWM / ANY ROOT OR RECOVERY and I stucked at bootloop while the phone kept on ringing 4times at the T-mobile boot screen.
i think Samsung had changed something to prevent from install recovery or root on S5 in 5.1.1.
We should wait for someone to make 5.1.1 root.
The good news: You are able to downgrade from 5.1.1 to 5.0 or even 4.4 just by flashing previous firmwares using ODIN.
Without any problem. Full service, imei, SV, .... everything's fine.
Click to expand...
Click to collapse
Try this, run cf auto root, let it reboot, yank the battery, reboot to dl mode and flash ONLY the stock recovery from the update and reboot

thienbrand said:
The good news: You are able to downgrade from 5.1.1 to 5.0 or even 4.4 just by flashing previous firmwares using ODIN.
Without any problem. Full service, imei, SV, .... everything's fine.
Click to expand...
Click to collapse
Add this to your op so people don't freak out lol

I'm sure we'll get a working root method for 5.1.1, iirc I read the S6 running 5.1.1 was easily rooted, even without tripping KNOX

Can anyone post some screenshot of this release? Thanks in andvance!

nfs11 said:
Can anyone post some screenshot of this release? Thanks in andvance!
Click to expand...
Click to collapse
Looks the same as 5.0

ShinySide said:
Looks the same as 5.0
Click to expand...
Click to collapse
Theme support?

ShinySide said:
Try this, run cf auto root, let it reboot, yank the battery, reboot to dl mode and flash ONLY the stock recovery from the update and reboot
Click to expand...
Click to collapse
We don't have the seperate recovery file.

nfs11 said:
Theme support?
Click to expand...
Click to collapse
No theme support. It's still a S6 exclusive.

thienbrand said:
We don't have the seperate recovery file.
Click to expand...
Click to collapse
It's in the tar. I tried it few minutes ago, still wouldn't boot

m_malyszko said:
No theme support. It's still a S6 exclusive.
Click to expand...
Click to collapse
I guess that will be exclusive for a limited time. I hope.

m_malyszko said:
No theme support. It's still a S6 exclusive.
Click to expand...
Click to collapse
That's disappointing, my excitement for 5.1.1 has just disappeared.

Is there an easy way to unroot?

I'm using chroma ROM and my satellite provider requires it's app to run on an unrooted phone. I'd there an easy way to unroot my Nexus without having to wipe?

slekkas said:
I'm using chroma ROM and my satellite provider requires it's app to run on an unrooted phone. I'd there an easy way to unroot my Nexus without having to wipe?
Click to expand...
Click to collapse
Flash the system image from a factory image. If your kernel is modified, flash the boot IMG as well.

Use wugs toolkit.

Evolution_Tech said:
Flash the system image from a factory image. If your kernel is modified, flash the boot IMG as well.
Click to expand...
Click to collapse
So just to get this straight and I don't screw up my phone. I find the stock rom same version as my chroma which is LMY48B. I extract it and using fastboot I install system.img and boot.img? My phone is unencrypted right now... Will it get encrypted?
And when I need root again I must just install it along with Franco Kernel I'm using?
I appreciate the help...

Nickchapstick said:
Use wugs toolkit.
Click to expand...
Click to collapse
I installed it on my laptop but even though my phone is rooted I don't see an option to unroot... Maybe because I didn't use regular rom and used chroma instead?

slekkas said:
So just to get this straight and I don't screw up my phone. I find the stock rom same version as my chroma which is LMY48B. I extract it and using fastboot I install system.img and boot.img? My phone is unencrypted right now... Will it get encrypted?
And when I need root again I must just install it along with Franco Kernel I'm using?
I appreciate the help...
Click to expand...
Click to collapse
First, why are you trying to unroot?
You would download a factory image form the Google developer page. Extract twice, and grab the system image from there. Yes, match the version your phone is currently on.

Evolution_Tech said:
First, why are you trying to unroot?
You would download a factory image form the Google developer page. Extract twice, and grab the system image from there. Yes, match the version your phone is currently on.
Click to expand...
Click to collapse
I'm trying to unroot because my satellite provider uses an app like sky go that requires your phone to be unrooted... I need to watch a game sometimes when I'm at work.

slekkas said:
I'm trying to unroot because my satellite provider uses an app like sky go that requires your phone to be unrooted... I need to watch a game sometimes when I'm at work.
Click to expand...
Click to collapse
Have you considered multi ROM? You could have your rooted normal set up and a non rooted as well.

Can't you just go into supersu settings and unroot? That way you can stay on chroma

Kreateablaze said:
Can't you just go into supersu settings and unroot? That way you can stay on chroma
Click to expand...
Click to collapse
Depends on how deeply his situation is looking for root files. The unroot feature of SuperSU doesn't remove everything.

Evolution_Tech said:
Have you considered multi ROM? You could have your rooted normal set up and a non rooted as well.
Click to expand...
Click to collapse
My friend I didn't know this was possible with the nexus 6. That would really interest me.... I already have twrp installed. Is there an easy guide you can point out for me?

slekkas said:
My friend I didn't know this was possible with the nexus 6. That would really interest me.... I already have twrp installed. Is there an easy guide you can point out for me?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3074529

Evolution_Tech said:
Depends on how deeply his situation is looking for root files. The unroot feature of SuperSU doesn't remove everything.
Click to expand...
Click to collapse
Tried this keeps telling me that I need to unroot. So i'm about to start the multi rom procedure

Evolution_Tech said:
Have you considered multi ROM? You could have your rooted normal set up and a non rooted as well.
Click to expand...
Click to collapse
How about the encryption? Chroma is unencrypted. If the second rom is encrypted what happens there?
I'm also trying to find a stock rom that is not pre-rooted to install from recovery. Can you show me the latest I can get?

Evolution_Tech said:
Have you considered multi ROM? You could have your rooted normal set up and a non rooted as well.
Click to expand...
Click to collapse
My friend I installed multirom and used an older Chroma rom that wasn't pre-rooted. it worked like a charm.... Now I can just go to this rom and use all my apps that require the phone to be unrooted.... Again thanks for the idea....

Can I just ask what version of chroma wasn't pre rooted? I want to do the same if possible. Thanks

Drefsab said:
Can I just ask what version of chroma wasn't pre rooted? I want to do the same if possible. Thanks
Click to expand...
Click to collapse
well, 2 months ago it was being called older.. anyways, the far majority of roms do not have root. you need to flash the supersu file shen flashing the roms, for root. but, to flash a rom, yoh need an unlocked bootloader and twrp recovery. most apps that check for root will still think that you have root though.

simms22 said:
well, 2 months ago it was being called older.. anyways, the far majority of roms do not have root. you need to flash the supersu file shen flashing the roms, for root. but, to flash a rom, yoh need an unlocked bootloader and twrp recovery. most apps that check for root will still think that you have root though.
Click to expand...
Click to collapse
i must have fell asleep during this development lol
far as i have ever seen, its rare for a rom to not be rooted, however, more frequently devs have had it off by default, and its a treasure hunt to find where to turn it on.
i do always flash the su zip, to avoid this tedious hunting though.

bweN diorD said:
i must have fell asleep during this development lol
far as i have ever seen, its rare for a rom to not be rooted, however, more frequently devs have had it off by default, and its a treasure hunt to find where to turn it on.
i do always flash the su zip, to avoid this tedious hunting though.
Click to expand...
Click to collapse
cm based, probably have root. aosp roms, the far majority do mot have root. you need to grab it if you want it

simms22 said:
cm based, probably have root. aosp roms, the far majority do mot have root. you need to grab it if you want it
Click to expand...
Click to collapse
yup I found that most are pre-rooted, though found cleancore that works great. I've just installed multirom and that booted into it then tested a couple of apps that are blocked on root (Banking app and Sky Go), and happy days they work great.
Its annoying and rather wasteful having have a second rom just to run a couple of apps but at least now I can use the apps on my device if I want to. Thanks
Typical apps block hacking (root) so the work around instead of unrooting is to go deeper with the hacks/mods

MM Update (QI2) - TWRP Won't Install!!!

Hi,
I just got this phone (same phone I had to replace the one that died)::
Samsung Galaxy (SM-N910T) Note 4 (QualComm)
Marshmallow 6.0.1
It's Unlocked.
Anyway, before I could install TWRP so I could Root it, Android Firmware Updates started coming through. I figured let them install and that way I'd have them. I knew that if I tried to install them after installing TWRP, it would just replace TWRP anyway.
After the last Update, the Build is now...
Build #: MMB29M.N910T3UVU3EQI2
I have tried TWRP 3.0.2.0 & 2.8.7.0 and even PhilZ 6.59.0 but nothing will go on! Odin (latest and tried older one) starts to Flash it, it says "Recovery" and then it says, "FAIL".
I'm thinking it's gotta have something to do with the Updates to Marshmallow???
PLEASE HELP! I can't do anything that I need to do without it Rooted and I can't Root it without a Custom Recovery.
Thanks!
Dave

Zeuszoos said:
Hi,
I just got this phone (same phone I had to replace the one that died)::
Samsung Galaxy (SM-N910T) Note 4 (QualComm)
Marshmallow 6.0.1
It's Unlocked.
Anyway, before I could install TWRP so I could Root it, Android Firmware Updates started coming through. I figured let them install and that way I'd have them. I knew that if I tried to install them after installing TWRP, it would just replace TWRP anyway.
After the last Update, the Build is now...
Build #: MMB29M.N910T3UVU3EQI2
I have tried TWRP 3.0.2.0 & 2.8.7.0 and even PhilZ 6.59.0 but nothing will go on! Odin (latest and tried older one) starts to Flash it, it says "Recovery" and then it says, "FAIL".
I'm thinking it's gotta have something to do with the Updates to Marshmallow???
PLEASE HELP! I can't do anything that I need to do without it Rooted and I can't Root it without a Custom Recovery.
Thanks!
Dave
Click to expand...
Click to collapse
From what I know, the bootloader isn't locked but I recommend installing a KitKat bootloader Using this thread
https://forum.xda-developers.com/no...ws-want-to-downgrade-to-4-4-4-kitkat-t3447773
From there you can install TWRP and/or update to qg1, qe2, or older.

dottyparent said:
From what I know, the bootloader isn't locked but I recommend installing a KitKat bootloader Using this thread
https://forum.xda-developers.com/no...ws-want-to-downgrade-to-4-4-4-kitkat-t3447773
From there you can install TWRP and/or update to qg1, qe2, or older.
Click to expand...
Click to collapse
First, thank you for responding!
I used that page on my last Note 4 (it died, hardware failure), after I tried MM but hated the Ext SD handling and so I went back down to the T2 KK ROM on that page and it worked fine (I installed the entire ROM). But my replacement Note 4 that just arrived already had MM as I said and updated to a Build # I haven't seen.
But if you look at the Build #, T-Mobile seems to have (via the Updates) turned the phone into a "N910T3" instead of a "N910T". Weird! Especially since I'm with MetroPCS. Hahaha! They're owned by T-Mobile though, use the same Towers, etc..
Anyway, I'd like to try and stick with MM this time around.
But you did hit one of my grey areas.
Let me see if I understand you correctly... If I were to Flash just the KK BL, my phone would/would not continue to Boot into Marshmallow as it is now, if I Flashed nothing but that?
Or am I correct in saying that your method would mean taking the phone back, so that it would be running KitKat and then going back up to Marshmallow using a different ROM that TWRP will be able to go onto?
The reason I'm fuzzy, is because I've never Flashed just a BootLoader, so I'm not sure what would happen if I Flash just the KK BootLoader onto an MM ROM and Reboot???
Thank you again for your time!

Zeuszoos said:
First, thank you for responding!
I used that page on my last Note 4 (it died, hardware failure), after I tried MM but hated the Ext SD handling and so I went back down to the T2 KK ROM on that page and it worked fine (I installed the entire ROM). But my replacement Note 4 that just arrived already had MM as I said and updated to a Build # I haven't seen.
But if you look at the Build #, T-Mobile seems to have (via the Updates) turned the phone into a "N910T3" instead of a "N910T". Weird! Especially since I'm with MetroPCS. Hahaha! They're owned by T-Mobile though, use the same Towers, etc..
Anyway, I'd like to try and stick with MM this time around.
But you did hit one of my grey areas.
Let me see if I understand you correctly... If I were to Flash just the KK BL, my phone would/would not continue to Boot into Marshmallow as it is now, if I Flashed nothing but that?
Or am I correct in saying that your method would mean taking the phone back, so that it would be running KitKat and then going back up to Marshmallow using a different ROM that TWRP will be able to go onto?
The reason I'm fuzzy, is because I've never Flashed just a BootLoader, so I'm not sure what would happen if I Flash just the KK BootLoader onto an MM ROM and Reboot???
Thank you again for your time!
Click to expand...
Click to collapse
This method will turn your phone temporarily to a t2, of which a mm Rom will not boot. Since your goal is to have TWRP on a MM Rom, I would do the following:
1. Flash the t2 KK bootloader.
2. Find your appropriate KK bootloader (ie if you have a 910t find a 910t bootloader) and flash it
3. Flash TWRP
4. Flash a MM bootloader and modem.

dottyparent said:
This method will turn your phone temporarily to a t2, of which a mm Rom will not boot. Since your goal is to have TWRP on a MM Rom, I would do the following:
1. Flash the t2 KK bootloader.
2. Find your appropriate KK bootloader (ie if you have a 910t find a 910t bootloader) and flash it
3. Flash TWRP
4. Flash a MM bootloader and modem.
Click to expand...
Click to collapse
Is this a method you've tried B4?
I'll check out that thread and see if they've got an MM Modem too.
Isn't that the "EFS" part of a ROM? If so, there are EFS Backup apps. But they may require Root though.
TTYL

Zeuszoos said:
Is this a method you've tried B4?
I'll check out that thread and see if they've got an MM Modem too.
Isn't that the "EFS" part of a ROM? If so, there are EFS Backup apps. But they may require Root though.
TTYL
Click to expand...
Click to collapse
Yes I have tried this. I changed my phone from a trip to a t2 and back again.

dottyparent said:
This method will turn your phone temporarily to a t2, of which a mm Rom will not boot. Since your goal is to have TWRP on a MM Rom, I would do the following:
1. Flash the t2 KK bootloader.
2. Find your appropriate KK bootloader (ie if you have a 910t find a 910t bootloader) and flash it
3. Flash TWRP
4. Flash a MM bootloader and modem.
Click to expand...
Click to collapse
dottyparent said:
Yes I have tried this. I changed my phone from a trip to a t2 and back again.
Click to expand...
Click to collapse
There is an MM ROM that is Rooted and has TWRP built in, but I don't know if it would Flash over this with Odin or not
I am also considering trying the entire KK T2 ROM again to go down to KK and then Flashing that MM ROM.
It has both Odexed & DeOdexed. If I remember right, DeOdexed is the better choice, right?
Thanks for all your time and help!
Dave

Hi,
You know what's sad, is that if I could somehow Roog it without TWRP, then I could use the way awesome "Flashify" app to try to get TWRP on this phone! <lol>
Dave

dottyparent said:
From what I know, the bootloader isn't locked but I recommend installing a KitKat bootloader Using this thread
https://forum.xda-developers.com/no...ws-want-to-downgrade-to-4-4-4-kitkat-t3447773
From there you can install TWRP and/or update to qg1, qe2, or older.
Click to expand...
Click to collapse
dottyparent said:
Yes I have tried this. I changed my phone from a trip to a t2 and back again.
Click to expand...
Click to collapse
Could you please tell me where the files are that you used, so that I can have the exact same ones to work with? I looked at the link you provided, but I couldn't find just the BootLoader in it. I saw where someone requested just the BootLoader and Modem (you?) and "Trex888" said he would upload them right away and provide a link, but I did not see one ever posted. Just the link for the entire ROM.
Btw, in Odin, if you're Flashing only the BootLoader, do you use the "BL" button instead of the "AP" (formerly "PDA") button? What about just the Modem (thru Recovery?)?
I just tried Flashing the entire T2 KK ROM that I had used to go back from MM to KK on my first Note 4, but this one wouldn't take that either. It immediately said "FAIL".
I'm sorry if I'm a pain. It's just that I'm disabled and constantly laying on my side, so a laptop is out for regular use and so this phone is my main and only communication with the outside world. What I'm saying is that it's not a hobby phone and I have to get it right, because (see below). So I don't want to Flash something that may not do it, so I want to exactly match what you did.
You see, I can only sit up to Flash from Odin on my Windows computer with my phone cabled to it for just so long because of my condition.
Not your problem, I know. But I'm explaining it to you so that you can understand that I'm not just trying to be lazy. But instead, I need to make sure I do exactly what worked for you, with exactly those files, because if something goes wrong, it could take me days of short time computer access due to my situation (too much overwhelming pain) to figure it out and get it (hopefully) fixed. So you can see the importance, no doubt.
This phone right now (see Build #) says it's a T3, but whatever works.
Right now, it's without Recovery so I can't Root it, so I can't get Write access to my Ext SD, etc.. I need to Root!
Also, this T3 MM ROM is having issues with the Display. Sometimes it'll get all chopped up and I have to Reboot.
So anyway, I need to get this done and I would very much appreciate your further help!
Thank You!!!
Dave

Zeuszoos said:
Could you please tell me where the files are that you used, so that I can have the exact same ones to work with? I looked at the link you provided, but I couldn't find just the BootLoader in it. I saw where someone requested just the BootLoader and Modem (you?) and "Trex888" said he would upload them right away and provide a link, but I did not see one ever posted. Just the link for the entire ROM.
Btw, in Odin, if you're Flashing only the BootLoader, do you use the "BL" button instead of the "AP" (formerly "PDA") button? What about just the Modem (thru Recovery?)?
I just tried Flashing the entire T2 KK ROM that I had used to go back from MM to KK on my first Note 4, but this one wouldn't take that either. It immediately said "FAIL".
I'm sorry if I'm a pain. It's just that I'm disabled and constantly laying on my side, so a laptop is out for regular use and so this phone is my main and only communication with the outside world. What I'm saying is that it's not a hobby phone and I have to get it right, because (see below). So I don't want to Flash something that may not do it, so I want to exactly match what you did.
You see, I can only sit up to Flash from Odin on my Windows computer with my phone cabled to it for just so long because of my condition.
Not your problem, I know. But I'm explaining it to you so that you can understand that I'm not just trying to be lazy. But instead, I need to make sure I do exactly what worked for you, with exactly those files, because if something goes wrong, it could take me days of short time computer access due to my situation (too much overwhelming pain) to figure it out and get it (hopefully) fixed. So you can see the importance, no doubt.
This phone right now (see Build #) says it's a T3, but whatever works.
Right now, it's without Recovery so I can't Root it, so I can't get Write access to my Ext SD, etc.. I need to Root!
Also, this T3 MM ROM is having issues with the Display. Sometimes it'll get all chopped up and I have to Reboot.
So anyway, I need to get this done and I would very much appreciate your further help!
Thank You!!!
Dave
Click to expand...
Click to collapse
Okay. Here is what I did exactly.
Download my Files here: https://1drv.ms/f/s!AJEa3D0cBAhIbQ
Stock 910T files here https://androidfilehost.com/?w=files&flid=20602
i guess if you need any other stock files sammobile works.
This will reset your phone!
1) Odin flash the AOG1 file. this turns the phone into a t2 phone.
2) Odin the ANK4 rom. this returns the phone to a 910t.
3) Boot into the ANK4 rom and download the MM update. This should land you on the first MM update, EPE3
4) Flash TWRP, thourgh AP, which should work. Might as well flash superSU or magisk.
At this point i would wipe everything and install a custom rom, but you could update to a newer boot loader and modem using the BL and CP buttons, respectively.
hope this helps

dottyparent said:
Okay. Here is what I did exactly.
Download my Files here: https://1drv.ms/f/s!AJEa3D0cBAhIbQ
Stock 910T files here https://androidfilehost.com/?w=files&flid=20602
i guess if you need any other stock files sammobile works.
This will reset your phone!
1) Odin flash the AOG1 file. this turns the phone into a t2 phone.
2) Odin the ANK4 rom. this returns the phone to a 910t.
3) Boot into the ANK4 rom and download the MM update. This should land you on the first MM update, EPE3
4) Flash TWRP, thourgh AP, which should work. Might as well flash superSU or magisk.
At this point i would wipe everything and install a custom rom, but you could update to a newer boot loader and modem using the BL and CP buttons, respectively.
hope this helps
Click to expand...
Click to collapse
Thank you for responding!
The OG1 is the T2 ROM that I had just tried and reported that unlike my previous Note 4, it would not Flash on this one to turn it into a KK T2. I also tried the other 2 ROMS to no avail.
I think it's because this one says it's a T3.
Thanks,
Dave

Zeuszoos said:
Thank you for responding!
The OG1 is the T2 ROM that I had just tried and reported that unlike my previous Note 4, it would not Flash on this one to turn it into a KK T2. I also tried the other 2 ROMS to no avail.
I think it's because this one says it's a T3.
Thanks,
Dave
Click to expand...
Click to collapse
I'm sorry man I did everything that I could think of. I knew that the T3 had a few issues with bootloaders and downgrading and stuff, but wow, i didn't know about these issues. Good luck with trying something else then.

dottyparent said:
I'm sorry man I did everything that I could think of. I knew that the T3 had a few issues with bootloaders and downgrading and stuff, but wow, i didn't know about these issues. Good luck with trying something else then.
Click to expand...
Click to collapse
No, I'm sorry, but you have to give me the answer.
All seriousness aside, I depreciate all your effort.
I can only think of one thing left to try... Go to Sammy's site and get the Lollipop 5.1.1 ROM and see what happens. It can't hurt to try, right?
I'll let ya know what happens and thank you again!
Happy Thanksgiving!
Dave

dottyparent said:
I'm sorry man I did everything that I could think of. I knew that the T3 had a few issues with bootloaders and downgrading and stuff, but wow, i didn't know about these issues. Good luck with trying something else then.
Click to expand...
Click to collapse
Guess what? I decided to take a picture of my phone's screen after it Failed to let me Flash anything at all in Odin. I tried TWRP again and this time read what my phone responds with and it says the following:
Custom Binary (Recovery) Blocked By FRP LOCK
Does that mean anything to you?
TTYL

Zeuszoos said:
Guess what? I decided to take a picture of my phone's screen after it Failed to let me Flash anything at all in Odin. I tried TWRP again and this time read what my phone responds with and it says the following:
Custom Binary (Recovery) Blocked By FRP LOCK
Does that mean anything to you?
TTYL
Click to expand...
Click to collapse
Well I searched around XDA and it seems to be a problem exclusive to the T3. Try going to settings -> security and see if there is a option to disable resetting protection. Or see if there is a way to disable OEM locking. However it's probably not there. The only successful thread I found was this
https://forum.xda-developers.com/note-4/help/note-4-t-mobile-sm-n910t3-custom-binary-t3346840
---------- Post added at 07:28 PM ---------- Previous post was at 07:24 PM ----------
If all else doesn't work, perhaps you could repartition your phone. You need a pit file and a few ROMs

Zeuszoos said:
Hi,
I just got this phone (same phone I had to replace the one that died)::
Samsung Galaxy (SM-N910T) Note 4 (QualComm)
Marshmallow 6.0.1
It's Unlocked.
Anyway, before I could install TWRP so I could Root it, Android Firmware Updates started coming through. I figured let them install and that way I'd have them. I knew that if I tried to install them after installing TWRP, it would just replace TWRP anyway.
After the last Update, the Build is now...
Build #: MMB29M.N910T3UVU3EQI2
I have tried TWRP 3.0.2.0 & 2.8.7.0 and even PhilZ 6.59.0 but nothing will go on! Odin (latest and tried older one) starts to Flash it, it says "Recovery" and then it says, "FAIL".
I'm thinking it's gotta have something to do with the Updates to Marshmallow???
PLEASE HELP! I can't do anything that I need to do without it Rooted and I can't Root it without a Custom Recovery.
Thanks!
Dave
Click to expand...
Click to collapse
That's weird. I updated my N910T to EQI2 with Odin, rooted using CF-Auto-Root for N910T and then flashed TWRP 3.1.1 and I had no problems at all

dottyparent said:
I'm sorry man I did everything that I could think of. I knew that the T3 had a few issues with bootloaders and downgrading and stuff, but wow, i didn't know about these issues. Good luck with trying something else then.
Click to expand...
Click to collapse
ShaDisNX255 said:
That's weird. I updated my N910T to EQI2 with Odin, rooted using CF-Auto-Root for N910T and then flashed TWRP 3.1.1 and I had no problems at all
Click to expand...
Click to collapse
But you updated to it. From KK?
KK doesn't have it and it's not in downloadable ROMS.
But if MM is already on the phone (mine), then it has FRP. See my other response.
TTYL

Zeuszoos said:
But you updated to it. From KK?
KK doesn't have it and it's not in downloadable ROMS.
But if MM is already on the phone (mine), then it has FRP. See my other response.
TTYL
Click to expand...
Click to collapse
That's because I have a n910t not a t3

Zeuszoos said:
But you updated to it. From KK?
KK doesn't have it and it's not in downloadable ROMS.
But if MM is already on the phone (mine), then it has FRP. See my other response.
TTYL
Click to expand...
Click to collapse
I upgraded from LL. The device was running 5.0.1 and now has 6.0.1

dottyparent said:
Well I searched around XDA and it seems to be a problem exclusive to the T3. Try going to settings -> security and see if there is a option to disable resetting protection. Or see if there is a way to disable OEM locking. However it's probably not there. The only successful thread I found was this
https://forum.xda-developers.com/note-4/help/note-4-t-mobile-sm-n910t3-custom-binary-t3346840
---------- Post added at 07:28 PM ---------- Previous post was at 07:24 PM ----------
If all else doesn't work, perhaps you could repartition your phone. You need a pit file and a few ROMs
Click to expand...
Click to collapse
Thank you for looking! I found out what it is.
It's "Factory Reset Protection" (FRP)
What it does, is keep someone else from Factory Resseting your phone if they steal it. When they reset it, during setup, they have to type in the last Google Email and Password that the phone used, before they can set up theirs.
After reading that, I remembered having to put my Google Info in at two separate points and seeing it telling me to "Verify", but I was just blowing right through setup, not reading all of the small print. I mean hey, I had no idea that even existed and was just annoyed that I had to type the same thing twice!
It will only be found on phones that already have Lollipop and up on them out of the box and probably not all of them yet. And you don't have to worry about downloadable ROMS, so those who have phones that started with KitKat, or even early versions of Marshmallow 6.0 or 6.0.1 would not have seen this happen to them. Even those who updated to the same version of Mm that my phone has won't, if they started with KK or an older MM and then updated to it.
Again, this is something that your phone would have "Out of the Box" and the phone (not all) would have at least L on it.
Just FYI, it's not just Samsung, either.
Just FYI, I have confirmed this info. It is a fact.
Once I have an easy to do, working fix, hopefully without having to perform a Factory Reset, I will "Create A Thread" and as normal for me, write clear and easy, step by step (not leaving any out) instructions on how to "Unlock FRP" and then come back here and post a link to the thread. Hopefully this week.
This phone will not beat me!!!
TTYL
Dave