i brick my phone and forgot to backup it, i found some stock rom and try to flash it using sp flash tool, and it back. my problem is i cant connect my wifi it says after turing on i got error same with my bluetooth cant detect other devices. is there a way to get back my wifi and bluetooth again.
Try Odin3 v3.07 flash tool (it's a tool from Samsung) and flash your stock firmware.
Or download a other firmware from : sammobile.com/firmware
Related
dear all
i have tried everything and i think i bricked my phone.
my phone have no iemi number and the firmware info are :
PDA : I9000JPJPG
Phone : Unknown
CSC : I9000OJPJPF
Odin wont recognize the download mode so i cant flash stock rom
the problem is the phone wont recognize the simcard , everything else is normal.
i have clockworkmod recovery, tried flashing different roms and radios still nothing. it also gives me baseband unkown. what should i do???
the problem is the phone wont recognize the simcard , everything else is normal.
Is that due to you installing a rom that does not have your network
in which case in the settings manually add your Networks details apn etc .
jje
Try see if your clockwordmod has any backups? Usually when doing changes it does make a full system backup..
If so, try restore from there, it should also restore imei
Not forgetting your backed up efs folder can be replaced if you did back it up most ignore that faq .
Mine came back with install of a new rom .
jje
areenchem said:
dear all
i have tried everything and i think i bricked my phone.
my phone have no iemi number and the firmware info are :
PDA : I9000JPJPG
Phone : Unknown
CSC : I9000OJPJPF
Odin wont recognize the download mode so i cant flash stock rom
the problem is the phone wont recognize the simcard , everything else is normal.
i have clockworkmod recovery, tried flashing different roms and radios still nothing. it also gives me baseband unkown. what should i do???
Click to expand...
Click to collapse
I had the same thing, I had to use the 3 button method and used Odin but remember that you have to have Odin running before you connect your phone to your USB connection and you should also have your phone in Download mode using the 3 button method before connecting it to your USB connection. Otherwise Odin won't recognise it, Also you need to make sure you have the phone drivers on you PC.
I just downloaded a stock firmware from samfirmware.com and that installed brought it back to how it was when I bought it. (Fully functional) and then I tried again with rooting it and lagfixing it. works fine.
The reason why mine died in the first place was because I didn't wait long enough on the first boot after the flash and I had thought it had frozen when it was really still just writing new information to the hardware so remember to be patient on the first boot after the flash.
It seems your phone Modem part is not flashed properly thus you could not retreive the IMEI from this part.
Suggestion:
Try to locate the original ROM which comes with this phone and flash it again and check if this works. From this start from zero
Couldn't you flash the modem via clockworktecovery if odin doesn't work? Much more simple if the missing modem is the problem. Modems can be found via docs thread.
Sent from my GT-I9000 using XDA App
lost IMEI
If you are not even getting Odin to connect to your phone, your bootloader must be corrupted. If the phone can get into APX mode, you can flash new bootloader and start off from there.
Connect device to Windows PC and see if Windows would detect the device to start with
Hi everyone
So here it is : No program is able to recognize/detect my Galaxy S i9000M (Bell Vibrant) when it's in download mode, so I can't flash any ROM. My phone is currently fully bricked and unusable. I cannot access to the recovery mode with the three-button thingy or by "adb reboot recovery"
I bricked using Odin 1.8, trying to flash a 2.2 froyo stock ROM from Samfirmware. The flashing went ok, but it failed to reboot. Actually, the screen was turned off and nothing was happening. I figured out it was fully bricked so I made a USB JIG, it worked. I can access my download mode.
I connected the phone to my Windows 7 computer and used Odin to flash back to 2.1 Eclair, with a stock ROM from Samfirmware. It failed (I don't remember the error message, it was a couple days ago...).
I tried with Heimdall Frontened. It had a problem uploading the .pit file, so the flashing didn't work.
Now each time i connect the phone to my computer, Windows (and Heimdall frontened and Odin) doesn't detect it,which means that I can't flash anything on it even though it is in download mode.
I have tried reinstalling like every driver on earth, still not responding.
I tried on another Windows 7 machine and on Ubuntu, the device is not detected.
I tried with different USB cables, nothing happens.
This is my hypothesis (maybe silly) : Could the problem be the Download mode being corrupted?
Whatever... I could use some help from you guys.
Thank you,
Sam
I had/have the same problem.
I installed the Samsung Kies and now my computer recognize my phone again.
But I have still no idea what I need to flash to make my phone working.
goldsage said:
I had/have the same problem.
I installed the Samsung Kies and now my computer recognize my phone again.
But I have still no idea what I need to flash to make my phone working.
Click to expand...
Click to collapse
That is strange... I tried installing Kies and it didn't detect the phone. And you could just flash any 2.3 stock ROM with Odin I guess.
Recently i rooted my Samsung Galaxy Tab(SGT) GT-p1000 that was brought from Singapore using the oneclickroot method.
My problem began when i heard about using heimdall to flash custom ROMS on the SGT. So i downloaded the Heimdall files and used heimdall frontend to attempt to root my SGT. Before that i had already used the zadig files to install the samsung composite USB driver. However as i boot my SGT into download mood, i accidentally pressed start to flash into my SGT with only the zimage and a wrongly selected Factoryfs file, These were taken from the BOCA rom I wanted to try to install.
Then i think i went into Boca's bootloader but i couldnt do anything. So i tried to reboot the device but it couldnt boot anymore. Just showed and android with an Exclamation mark. So i saw this thread http://forum.xda-developers.com/showthread.php?t=966015 and i thought that maybe i could use heimdall to flash back the default files. So i reflashed the new FactoryFS Zimage and Param.ifs provided by this new rom.
Now i can boot the phone normally into froyo 2.21, however now everytime i press the lock button the phone retarts. And everytime i try to connect to the internet using WiFi my phone restarts as well. 3g no longer works too. T_T
I can no longer connect to Kies and i tried reinstalling the drivers again but nothing would fix it. I cant use Heimdall or Odin to flash it anymore, Heimdall faced error -12 and Odin just kept trying to secure connection, but it never passes that point.
IM REALLY LOST AS TO WHAT TO DO. SOMEBODY HELP ME!!! PLEASE!
ADB
1-char
dirlan2001 said:
ADB
1-char
Click to expand...
Click to collapse
I don´t think this can help.
I think your problem is that you installed a incorrect rom for your tab model.
Download this:
http://overcome.mimzo.com/p1000/downloads/GB-Stock-Safe-v5.zip
Reinstall samsung drivers.
and flash the file using odin, repartition checked.
rafaeker19 said:
I don´t think this can help.
I think your problem is that you installed a incorrect rom for your tab model.
Download this:
http://overcome.mimzo.com/p1000/downloads/GB-Stock-Safe-v5.zip
Reinstall samsung drivers.
and flash the file using odin, repartition checked.
Click to expand...
Click to collapse
Hmmm... Odin doesn't get connected , so ....
Probably Heimdall will also do the flash for you - Odin is just one Windows-based tool to flash that device. Heimdall should have the same features for differnt platforms (so you can use it also on MAC OSX and Linux)- give Overcome a trial - and don't forget to flash the modem, if you want a fully working device
Hi,
my Note 9 started having some signal issues on 3G and LTE network since Android 10 and I wanted to solve this problem by installing an Android Pie firmware but it didn't work, so I've decided to install a custom ROM from Dr.Ketan and I was following the instructions from a YT video and I think I've mistaken something, because after installing/flashing (I don't know the right word for this) that CP and BL files is Odin it started to reboot but can't and displayed this error when it tried to turn on: kernel rev check fail device 6 binary 5 . I have the stock Android 10 firmware from SAMMOBILE but I can't install it because I can't get to the download mode because as I wrote I can't turn on the phone because of the mentioned error.
So my question is what should I do to fix this problem? If there isn't any solutions for this problem I'll take it to a service but if there is a solution I'll try to fix it for myself.
Can u boot to Download Mode?
muntaha_v3 said:
Can u boot to Download Mode?
Click to expand...
Click to collapse
No, I can't.
You probably was trying to odin earlier version of bootloader over a new one.
Find the latest firmware for your phone in sammobile. Extract BL and flash again.
Even when you turn on the phone and there is whatever error shown just flash it with odin. That should work normally. Or you can flash the whole firmware if you want.
try holding vol down+bixby button and plug in your usb cable to computer ?
Rosli59564 said:
You probably was trying to odin earlier version of bootloader over a new one.
Find the latest firmware for your phone in sammobile. Extract BL and flash again.
Even when you turn on the phone and there is whatever error shown just flash it with odin. That should work normally. Or you can flash the whole firmware if you want.
Click to expand...
Click to collapse
Sadly I'm not able to do it because the phone displays the error for a few seconds and Odin doesn't recognize it :/
lawong said:
try holding vol down+bixby button and plug in your usb cable to computer ?
Click to expand...
Click to collapse
I tried it but it doesn't work. :/
jayfromhungary said:
Hi,
my Note 9 started having some signal issues on 3G and LTE network since Android 10 and I wanted to solve this problem by installing an Android Pie firmware but it didn't work, so I've decided to install a custom ROM from Dr.Ketan and I was following the instructions from a YT video and I think I've mistaken something, because after installing/flashing (I don't know the right word for this) that CP and BL files is Odin it started to reboot but can't and displayed this error when it tried to turn on: kernel rev check fail device 6 binary 5 . I have the stock Android 10 firmware from SAMMOBILE but I can't install it because I can't get to the download mode because as I wrote I can't turn on the phone because of the mentioned error.
So my question is what should I do to fix this problem? If there isn't any solutions for this problem I'll take it to a service but if there is a solution I'll try to fix it for myself.
Click to expand...
Click to collapse
PS: Might it be a hard brick?
jayfromhungary said:
Sadly I'm not able to do it because the phone displays the error for a few seconds and Odin doesn't recognize it :/
Click to expand...
Click to collapse
Phone not detected? You sure it's not usb driver problem? Too bad because whatever the error is, should still be flashable with odin.
hi
initially i flashed A7020a48_LL_S125_160419_ROW successfully but after boot software update was not working giving error no network even when wifi was connected and working fine, so i decided to flash android 6.0 directly with this file A7020a48_S259_160721_ROW but failed, i tried SP Flash tool ver. 5.1548, 5.155 & 5.17 but no success and now i cant even flash S125_ROW. the device is dead i guess, only red light when connect usb but sp flash not detect my phone.
can anyone suggest a solution?