[q] nothing works:( - LG Optimus Black

I' ve tried to flash a patched v20s with SFT and after flash completed the phone boot and stuck on lg logo and leds turn on/off continuously.
I can flash only v30b....once i've flashed IZS v1 and worked....kind of....booted ok but can't use it because of the continuously FC of lgesetupwizard. After. deleted the lgesetupwizard.apk i've got another FC.
I COULD USE SOME HELP

JoKeR[RO-VL] said:
I' ve tried to flash a patched v20s with SFT and after flash completed the phone boot and stuck on lg logo and leds turn on/off continuously.
I can flash only v30b....once i've flashed IZS v1 and worked....kind of....booted ok but can't use it because of the continuously FC of lgesetupwizard. After. deleted the lgesetupwizard.apk i've got another FC.
I COULD USE SOME HELP
Click to expand...
Click to collapse
1 Download whatever ROM you want to use
2 Download SmartFlash Tool (password: bluedreams)
3 Download [PATCHED]V20S_00.7z
4 Unzip SmartFlash Tool and use it to flash unzipped V20S
5 When SmartFlash Tool will finish, your phone will reboot into recovery.
6 Wipe data, format system, wipe cache, wipe dalvik cache and flash the ROM you downloaded during first step.
This whole process has been tested by me and it worked as expected.
I hope that you don't encounter issues, but if you do so, ask here for help.

Lorenzoval said:
1 Download whatever ROM you want to use
2 Download SmartFlash Tool (password: bluedreams)
3 Download [PATCHED]V20S_00.7z
4 Unzip SmartFlash Tool and use it to flash unzipped V20S
5 When SmartFlash Tool will finish, your phone will reboot into recovery.
6 Wipe data, format system, wipe cache, wipe dalvik cache and flash the ROM you downloaded during first step.
This whole process has been tested by me and it worked as expected.
I hope that you don't encounter issues, but if you do so, ask here for help.
Click to expand...
Click to collapse
I understand but i can't flash a patched v20s. That is the problem. After flash the patched v20s with smart flash tools i hear the "ta daaa" sound the phone reboots but stuck at lg logo

JoKeR[RO-VL] said:
I understand but i can't flash a patched v20s. That is the problem. After flash the patched v20s with smart flash tools i hear the "ta daaa" sound the phone reboots but stuck at lg logo
Click to expand...
Click to collapse
Have you tried to flash this patched V20S instead of previous one with this SmartFlash Tool?

Lorenzoval said:
Have you tried to flash this patched V20S instead of previous one with this SmartFlash Tool?
Click to expand...
Click to collapse
No....i've tried with SFT and patched v20s uploaded by Ilko. Is there any difference between them?
Your v20s works in Romania?

JoKeR[RO-VL] said:
No....i've tried with SFT and patched v20s uploaded by Ilko. Is there any difference between them?
Your v20s works in Romania?
Click to expand...
Click to collapse
I have never tried V20S by Ilko, but I can confirm that this one is working. As this one is Europe Open, I think it works good in Romania.
//Edit:
I remember that I had problems with SFT by Ilko, so try to use this one.

Lorenzoval said:
I have never tried V20S by Ilko, but I can confirm that this one is working. As this one is Europe Open, I think it works good in Romania.
//Edit:
I remember that I had problems with SFT by Ilko, so try to use this one.
Click to expand...
Click to collapse
Ok, i'll try it when i have time. Do i have to root and TRY to unlock bootloader first?(rooting is not a problem but i don't know if bootloader works or not because at the end says "killing server" not "succes" or something like that)

JoKeR[RO-VL] said:
Ok, i'll try it when i have time. Do i have to root and TRY to unlock bootloader first?(rooting is not a problem but i don't know if bootloader works or not because at the end says "killing server" not "succes" or something like that)
Click to expand...
Click to collapse
To root it, flash superuser.zip in recovery (search it on the internet). If you are on Gingerbread (V20), you don't need to unlock the bootloader.

Lorenzoval said:
To root it, flash superuser.zip in recovery (search it on the internet). If you are on Gingerbread (V20), you don't need to unlock the bootloader.
Click to expand...
Click to collapse
I am on ics

JoKeR[RO-VL] said:
I am on ics
Click to expand...
Click to collapse
I'm sorry, I misunderstood your question. The right answer is: no, you don't need to root your phone or unlock its bootloader. SmartFlash Tool works with rooted and unrooted phones, unlocked and locked bootloaders.

Related

[Help] My o2x doenst boot, keep rebooting

Well, my o2x keeps rebooting, and stucking on boot.. i tryied flash v10b with nvflash and v20l with smartflash and its keep rebooting.. the phone doenst boot, i cant get into home screen.. anyone knows what can be? how i can fix it?
Thx
Have you come from a custom ROM before flashing v10b? If you have then you will probably have to use Paul obriens backtoext3 which is just flashed in cwm.
If its not then that's as far as my helpfulness can go...
Fulwood Sedge said:
Have you come from a custom ROM before flashing v10b? If you have then you will probably have to use Paul obriens backtoext3 which is just flashed in cwm.
If its not then that's as far as my helpfulness can go...
Click to expand...
Click to collapse
i was on modaco, then i restore back the original backup with cwm.
after i tryied install v20l, phone doesnt boot, then i tryied v10b and phone doesnt boot..
now i cant install CWM since the android system doesnt up.. any other idea? maybe a backtoext3 without cwm?
You should still be able to get cwm even in a boot loop. Keep holding power and volume down until you get to it and then flash backtoext3.
Was it boot looping after you restored your original. If it was then you might only be able to nv flash an original rom.
If it wasn't then you should be able to get to recovery and flash backtoext3
JackStow said:
i was on modaco, then i restore back the original backup with cwm.
after i tryied install v20l, phone doesnt boot, then i tryied v10b and phone doesnt boot..
now i cant install CWM since the android system doesnt up.. any other idea? maybe a backtoext3 without cwm?
Click to expand...
Click to collapse
Install CWM via NVFLash. Follow the first 3 steps of this guide to install it.
Fulwood Sedge said:
You should still be able to get cwm even in a boot loop. Keep holding power and volume down until you get to it and then flash backtoext3.
Click to expand...
Click to collapse
No. He said he smartflashed 20L, which means CWM has been overwritten with the stock recovery. All this will achieve is a wipe.
Fulwood Sedge said:
Have you come from a custom ROM before flashing v10b? If you have then you will probably have to use Paul obriens backtoext3 which is just flashed in cwm.
If its not then that's as far as my helpfulness can go...
Click to expand...
Click to collapse
TrymHansen said:
Install CWM via NVFLash. Follow the first 3 steps of this guide to install it.
No. He said he smartflashed 20L, which means CWM has been overwritten with the stock recovery. All this will achieve is a wipe.
Click to expand...
Click to collapse
thx guys, i will try it
but, if i smartflashed 20L, it doesnt means that the partitions back to ext3 too?
JackStow said:
thx guys, i will try it
but, if i smartflashed 20L, it doesnt means that the partitions back to ext3 too?
Click to expand...
Click to collapse
Yes, it does. I suggested you install CWM so you can restore a backup or flash a new one.
Both of the flashing procedures (NVFlash, Smartflash) should have restored your phone to a working state no matter what, so either your phone is faulty, or your USB-connection is flaky, lets hope its the last. (I assume you have read how, and most importantly, how not to connect USB when flashing.)
So run back2ext3, install a ROM and see if that works.
TrymHansen said:
Yes, it does. I suggested you install CWM so you can restore a backup or flash a new one.
Both of the flashing procedures (NVFlash, Smartflash) should have restored your phone to a working state no matter what, so either your phone is faulty, or your USB-connection is flaky, lets hope its the last. (I assume you have read how, and most importantly, how not to connect USB when flashing.)
So run back2ext3, install a ROM and see if that works.
Click to expand...
Click to collapse
do u suggest me install a ROM original or a custom rom?
and what u mean with how not to connect usb when flashing?
JackStow said:
do u suggest me install a ROM original or a custom rom?
Click to expand...
Click to collapse
To verify your phone isn't broken, first install an original ROM.
and what u mean with how not to connect usb when flashing?
Click to expand...
Click to collapse
Primarily it was a hint to go search and read about how to flash before you flash. But since you ask:
Do not connect to USB via a hub, always connect directly to the computer. When something doesn't work, try a different cable. Do not use an overclocked computer to flash. etc. etc. etc.
TrymHansen said:
To verify your phone isn't broken, first install an original ROM.
Primarily it was a hint to go search and read about how to flash before you flash. But since you ask:
Do not connect to USB via a hub, always connect directly to the computer. When something doesn't work, try a different cable. Do not use an overclocked computer to flash. etc. etc. etc.
Click to expand...
Click to collapse
well, iv installed cwm, then install backtoext3, then flashed v10b via nvflash, and phone still in boot loop :S
god damm ;/
JackStow said:
well, iv installed cwm, then install backtoext3, then flashed v10b via nvflash, and phone still in boot loop :S
god damm ;/
Click to expand...
Click to collapse
Try to flash a rom or restore a backup via CWM. Doing the same thing over and over is not likely to help.
Download one of these: http://forum.xda-developers.com/showthread.php?t=1328656
Put it on your sdcard.
Install CWM via NVFLash. (If not already there.)
Start CWM.
Wipe/Factory reset.
Flash it.
TrymHansen said:
Try to flash a rom or restore a backup via CWM. Doing the same thing over and over is not likely to help.
Download one of these: http://forum.xda-developers.com/showthread.php?t=1328656
Put it on your sdcard.
Install CWM via NVFLash. (If not already there.)
Start CWM.
Flash it.
Click to expand...
Click to collapse
i will try, but now im at work, i cant donwload 200mb >.>
but i will try later, then i post the results here.. very very thx man..
i just doind another tryes, but sometimes the phone stuck even in CWM menu..

Bootloop after installing kernel [solved]

I got a bootloop on Nova HD RC-12-21 (ICS 4.0.3) trying to install iron kernel 64MB from Aroma Installer. I can't get into CWM even with adb, so I don't know how to install another rom.
are you using cwm-rcovery touch?
see the hints about problems with circular bat mod, cwm touch etc.
did you try full wipe or non wipe?
Not being able to start CWM is weird...
However, you have smartflash and nvflash to those kind of panic situations.
wired indeed - may you post complete versions? just interested in the prob
world_of_ursus said:
are you using cwm-rcovery touch?
see the hints about problems with circular bat mod, cwm touch etc.
did you try full wipe or non wipe?
Click to expand...
Click to collapse
i'm using cwm-recovery without the touch but i'm not sure what version.
i think the problem is the iron kernel (because i've already saw some posts from people with problems with it. But all of them was able to start cwm.
i wiped data/factory and cache.
LarsPT said:
Not being able to start CWM is weird...
However, you have smartflash and nvflash to those kind of panic situations.
Click to expand...
Click to collapse
i've tried to use nvflash and nothing happened.
If you really can't enter CWM (how it's even possible after flashing system/boot partition?) the only thing you can do is reflash recovery or/and system+boot with smartflash. Somewhere on this forum you should easly find required files with how-to's.
giisele said:
i've tried to use nvflash and nothing happened.
Click to expand...
Click to collapse
Flash stock ROM (any V20*) using smartflash.
Root it with SuperOneClickv2.3.3
Install CWM 5.0.2.7-R2
And try flash Nova HD agian.
NicomUA said:
Flash stock ROM (any V20*) using smartflash.
Root it with SuperOneClickv2.3.3
Install CWM 5.0.2.7-R2
And try flash Nova HD agian.
Click to expand...
Click to collapse
When i try flash stock rom with smartflash, occurs this following error:
Code:
00:00.0 Sec :Download Start...
00:02.0 Sec :RomBinary Download start
00:02.3 Sec :PSI RAM writing start
00:12.3 Sec :Timeout error is occured
00:12.3 Sec :error!
with smartflash i've tried differents basebands and got the same results.
and nvflash dont recognize the device at all.
I just solved my problem doing this:
First I flashed a .kdz file (with the stock rom) with the help of this thread, then I rooted with SuperOneClick v2.3.3.0. Instaled CWM 5.0.2.0.
I didn't want to flash Nova HD never again, so I flashed a CM9 Kang and now it's stuck in the second logo
giisele said:
I just solved my problem doing this:
First I flashed a .kdz file (with the stock rom) with the help of this thread, then I rooted with SuperOneClick v2.3.3.0. Instaled CWM 5.0.2.0.
I didn't want to flash Nova HD never again, so I flashed a CM9 Kang and now it's stuck in the second logo
Click to expand...
Click to collapse
If you have flashed ONLY (without any other custom kernel or mods) Owain's newest kang on stock rom AFTER data/dalvik cache full wipe, try to do some reboots (1-5) after waiting at second logo longer then 1min. I have that issue sometimes and android is booting eventually, sooner or later.
i flashed LG's rom .kdz that i found in lg's site when i got stuck in 2nd logo
so i flashed again with CM 7.2.0 and voilá, i have my phone back!
thank you guys
I'm glad you've made it
Could you kindly change the name of the thread and add [solved] at the end of it?
LarsPT said:
I'm glad you've made it
Could you kindly change the name of the thread and add [solved] at the end of it?
Click to expand...
Click to collapse
there you go!

[Help] Boot Loop everytime I go to recovery

here's the thing..
i'm running on v20g, i rooted it using LG extract and injected CWM, flashed it using smart flash. but everytime i go to Reboot to recovery i always end up on a boot loop.
will someone help me? is there any way to downgrade from v20g to v20o??
please help me, i'm unable to use my phone for about a week now. :crying: :crying: :crying:
try using smartflash.... works for me everytime... and also try flashing the normal cwm not the touch one... might help...
Zaihanzainal said:
try using smartflash.... works for me everytime... and also try flashing the normal cwm not the touch one... might help...
Click to expand...
Click to collapse
you suggest i download the v20o kdz then extract bin/fls files then flash with smartflash? will that work?
yup you can try that, i normally do that when bootlooped or bricked =P
same problem for me
Zaihanzainal said:
yup you can try that, i normally do that when bootlooped or bricked =P
Click to expand...
Click to collapse
still boot loop.
Hey buddy! I have same problem with you! I noticed that when i'm on stock rooted rom i always ended into bootloop going into recovery using either rom manager or quickboot. When i'm on custom rom like marvel, zeus etc. i also ended into bootloop going into recovery but after 1 hr or more, i will turn on the phone and then it will boot into recovery. I have a hard time flashing different custom rom because of this. Its like there is a time out before entering cwm recovery. It also happened to me everytime i used smartflash tool. It takes an hour before my phone got boot. 2 weeks ago someone upload a flashable V20s spain stock rom that has capable of entering cwm recovery after flashing the stock rom and luckily i manage to save it to my computer. I flash it using smartflash tool, after flashing it will reboot and then it will stock into bootloop. I will remove the battery and wait for atleast 1 hr and then i will turn on my phone and it will automatically boot into recovery. I do data factory reset, clear cache 1st then install superuser zip and then after that i flash the custom rom. I suggest that look for a flashable stock rom that has capable of entering cwm automatically after flashing and once you got the cwm do all you want but install first the superuser zip before flashing custom rom.
EDIT:
Here's the link buddy but i don't know if its available to download.
http://forum.xda-developers.com/showthread.php?t=1775994
Sent from my LG-P970 using xda app-developers app

[Q] LG SECURITY ERROR - Bootloop on Optimus Black

I had rooted my Optimus Black right from the first week i had bought in May 2012. Tried all the possible custom ROM's out there. Huexx's Zeus ROM was my favourite. But due to power problems (abrupt restarts and excessive heating during charging) I had to give my Black to service center for repair. I made sure that I switched back to stock ROM before I give it back to the service center.
Since then, I have been unable to ROOT it !!
Tried all the possible methods to root it:
CWM Injection, Smartflash resulted into BOOTLOOP's when i tried to flash older V10 and V20 firmwares. Only firmwares that worked were V20 F and V20 G.
This got me really frustrated as I just couldnt ROOT IT.
Today I flashed European V30 with the intention of ROOTING it with Unlockroot.
This time i was successful in ROOTING.
I installed Rom Manager, Flashed CLockwordmod Recovery. Rebooted into recovery and was greeted with a "LG Security Error" !!!! The phone just wont start.
What is going on ?? Is my bootloader locked ?? I dont know ??
Can someone please help me ??
Official ICS has bootloader locked.
lg putted a "crc check" on the bootloader so if its modified like your case, it gives a security error
rrgrrg said:
lg putted a "crc check" on the bootloader so if its modified like your case, it gives a security error
Click to expand...
Click to collapse
Does that mean I am stuck on STOCK firmware from now on ?? This sucks.
I also came across things like for the Optimus G and Nitro.
Cant anything be done regarding this matter for the Black ?
Removing the very essence of andriod OS by LG by resorting to such stupidity really DISGUSTS me.
Please Dev's, come up with something. STOCK LG roms suck ass.
yes you cannot have cwm with that rom (atleast this easy)
flash another rom with smartflashtool
Download THIS and use THIS tutorial .. you`ll get Gingerbread rooted. After this install rom manager and you can install custom rom.
stefan2012 said:
Download THIS and use THIS tutorial .. you`ll get Gingerbread rooted. After this install rom manager and you can install custom rom.
Click to expand...
Click to collapse
Tried it but FAILED.
STUCK on LG logo with the bottom lights blinking. Waited for more than 10 mins but just stuck there.
As I had mentioned earlier, can boot successfully through only stock firmwares like V20 F, V20 G and V30. Cannot flash patched roms and neither can I flash old V10 firmware as it results in BOOTLOOP.
:crying:
Help Me !
pawan182 said:
Tried it but FAILED.
STUCK on LG logo with the bottom lights blinking. Waited for more than 10 mins but just stuck there.
As I had mentioned earlier, can boot successfully through only stock firmwares like V20 F, V20 G and V30. Cannot flash patched roms and neither can I flash old V10 firmware as it results in BOOTLOOP.
:crying:
Help Me !
Click to expand...
Click to collapse
i got this security error last week
when i tried to change rom FROM V30b to Jelly bam.
I solve my problem by using SMART FLASH...
flash v20g with recovery.
then make a fresh install of jelly bam.
And it works.
Hope it helps u.
Just remember to do a full wipe.
panda_linger said:
i got this security error last week
when i tried to change rom FROM V30b to Jelly bam.
I solve my problem by using SMART FLASH...
flash v20g with recovery.
then make a fresh install of jelly bam.
And it works.
Hope it helps u.
Just remember to do a full wipe.
Click to expand...
Click to collapse
I cannot boot through a patched firmware. Just wont start.
But I want to give your Patched V20 G a shot.
Can u please give me the download link of your Patched V20G ?
pawan182 said:
I cannot boot through a patched firmware. Just wont start.
But I want to give your Patched V20 G a shot.
Can u please give me the download link of your Patched V20G ?
Click to expand...
Click to collapse
Try this website for Firmware http://lg-phone-firmware.com/index.php?id_mod=1
My V20g might not suit you as im from asia.
You see which firmware suit you most.
I think NOOBY guide can solve your problem.
Just follow the steps he provided
http://forum.xda-developers.com/showthread.php?t=1487105
pawan182 said:
I cannot boot through a patched firmware. Just wont start.
But I want to give your Patched V20 G a shot.
Can u please give me the download link of your Patched V20G ?
Click to expand...
Click to collapse
it didnt boot to CWM? just a direct bootloop after flashing with SFT?
re4lsk said:
it didnt boot to CWM? just a direct bootloop after flashing with SFT?
Click to expand...
Click to collapse
A lot of people flash a patched V20 and they forget to flash the Superuser and that results in a bootloop.At least it happened to me when I first rooted my OB in ancient times.Maybe this is the case.
P.S.:Got some tacos today?
Edvin73 said:
A lot of people flash a patched V20 and they forget to flash the Superuser and that results in a bootloop.At least it happened to me when I first rooted my OB in ancient times.Maybe this is the case.
P.S.:Got some tacos today?
Click to expand...
Click to collapse
thats why i was asking if it booted to CWM.
PS no hay tacos hoy.
re4lsk said:
it didnt boot to CWM? just a direct bootloop after flashing with SFT?
Click to expand...
Click to collapse
EXACTLY !!
IT WONT BOOT AFTER FLASHING PATCHED FIRMWARE. STUCK ON LG logo with blinking bottom lights (strange but true).
Tried Rom Converter 2 and 2.1, Injection Method, everything.
Patched V20S, V20O does not work.
also CANNOT boot succesfully throuh a Stock V10 (so that it becomes easy to root).
panda_linger said:
Try this website for Firmware http://lg-phone-firmware.com/index.php?id_mod=1
My V20g might not suit you as im from asia.
You see which firmware suit you most.
I think NOOBY guide can solve your problem.
Just follow the steps he provided
http://forum.xda-developers.com/showthread.php?t=1487105
Click to expand...
Click to collapse
I have tried all possible methods in the above links. Does NOT work. It wont boot through a patched firmware. Seems like LG has put some sort of a LOCK for the BOOTLOADER. Only STOCK V20G, V20F and V30 work.
There is another member with the same issue. Check this.
http://forum.xda-developers.com/showthread.php?p=35908714#post35908714
pawan182 said:
I have tried all possible methods in the above links. Does NOT work. It wont boot through a patched firmware. Seems like LG has put some sort of a LOCK for the BOOTLOADER. Only STOCK V20G, V20F and V30 work.
Click to expand...
Click to collapse
Did you start smartflash as admin? Disable anti virus program and firewall maybe?
Sent from my LG-P970 using xda app-developers app
Hi
This happens if you flash original v30b with smart flash and the only way to go back to GB is flash a patched v20 version....
And it directly first boots into CWM...now dont restart....just flash your backup from your memcard,this will bring your phone back alive....
You can try copy any other zip version in your memory card if u dont have backup....
The problem is original v30 formats the phone in some diff format.....
Flashing it back with CWM...brings it back alive....
If you already flashed patched version then u can try to enter CWM by console...adb reboot recovery......else do as mentioned above....
Sent from my LG-P970 using xda app-developers app
N00BY0815 said:
Did you start smartflash as admin? Disable anti virus program and firewall maybe?
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Yupp.. tried as admin and antivirus disabled. BOOTLOOP.
The service center guys did something to it. just cant get into CWM after i claimed a repair under warranty.
rajeshmk2012 said:
Hi
This happens if you flash original v30b with smart flash and the only way to go back to GB is flash a patched v20 version....
And it directly first boots into CWM...now dont restart....just flash your backup from your memcard,this will bring your phone back alive....
You can try copy any other zip version in your memory card if u dont have backup....
The problem is original v30 formats the phone in some diff format.....
Flashing it back with CWM...brings it back alive....
If you already flashed patched version then u can try to enter CWM by console...adb reboot recovery......else do as mentioned above....
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
I have mentioned it previously also. It does not boot into Recovery/CWM after flashing patched firmware using SFT. It gets STUCK on LG logo. Only stock firmwares work.

[Q] PROBLEM!!! Can't flash anything bellow ics

Hi! I have an lg OB running ics 4.0.4(V30B). The phone it's rooted and I have CWM installed from Rom Manager. I can acces Recovery from Rom Manager and with the phone off ( VOLUME PLUS + G KEY). The problem is that I can't flash any Rom bellow ics (not even with Smart Flash Tools) without getting bootloops. I can flash Roms based on ics and above( IZS,CM10.1,NAMELESS ROM NIGHTLIES 4.4.4).
Could someone help me?
Nobody?
JoKeR[RO-VL] said:
Nobody?
Click to expand...
Click to collapse
I was hoping you fixed the issue. I don't know what to do.
It's a matter of unlocking the boot loader. Once you do that, you can jump back and forth between ICS-based ROMs and everything else.
Gingerbread ROMs include the boot loader (marvel and Huexxx).
androcraze said:
I was hoping you fixed the issue. I don't know what to do.
It's a matter of unlocking the boot loader. Once you do that, you can jump back and forth between ICS-based ROMs and everything else.
Gingerbread ROMs include the boot loader (marvel and Huexxx).
Click to expand...
Click to collapse
Man I can flash ICS-based ROMs .JB and KK, I can't flash GB stock or GB-based ROMs, not even with SFT.
I think the bootloader it's unlocked because I can acces CWM from switch off phone(key combo)....I am confused because i read many tutorials but they are contradictory
That happends also with me 2 times.
Just flash CWM recovery again.
ptxpaulo said:
That happends also with me 2 times.
Just flash CWM recovery again.
Click to expand...
Click to collapse
Already tried....when i try to flash a GB ROM stock or custom GB-based Rom I get stuck in a bootloop.Same story with Smart Flash Tools...SFT says "succes", I hear the "ta daaa" sound ,phone reboots but stuck in a bootloop.
JoKeR[RO-VL] said:
Already tried....when i try to flash a GB ROM stock or custom GB-based Rom I get stuck in a bootloop.Same story with Smart Flash Tools...SFT says "succes", I hear the "ta daaa" sound ,phone reboots but stuck in a bootloop.
Click to expand...
Click to collapse
Try toii install a ROM right after rebooting from flash.
What I did is: Install a JB ROM, After, I reinstall CWM with ADB, reboot and then I could install any rom.
ptxpaulo said:
Try toii install a ROM right after rebooting from flash.
What I did is: Install a JB ROM, After, I reinstall CWM with ADB, reboot and then I could install any rom.
Click to expand...
Click to collapse
Sorry but how to install CWM with ADB? I've installed CWM(6.0.1.4) only from Rom Manager....
JoKeR[RO-VL] said:
Sorry but how to install CWM with ADB? I've installed CWM(6.0.1.4) only from Rom Manager....
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1613183
ptxpaulo said:
http://forum.xda-developers.com/showthread.php?t=1613183
Click to expand...
Click to collapse
Doesn't work and its stuck on lg logo now
Try to flash first original Froyo 2.2.2 , and then you can upgrade to GB ! Worked for me !
seby24gl said:
Try to flash first original Froyo 2.2.2 , and then you can upgrade to GB ! Worked for me !
Click to expand...
Click to collapse
Did you unlocked the bootloader first? can you put a link with your froyo and SFT?
I am from Romania so I need an Europe Open
No, I don't tried to unlock bootloader, but like you , I got the bootloops every time I downgrade from ICS, Nameless or cyanogen roms . I use original Froyo - flashed with SFT , then upgrade to GB with Cwm recovery patch- flashed with SFT, then boot to recovery and install Nameless. I will give you the links, once I uploaded to my dropbox.
Here, I hope will help you : https://www.dropbox.com/s/psniks1yvqwymy9/firmware v10a-europe-p970.rar
seby24gl said:
No, I don't tried to unlock bootloader, but like you , I got the bootloops every time I downgrade from ICS, Nameless or cyanogen roms . I use original Froyo - flashed with SFT , then upgrade to GB with Cwm recovery patch- flashed with SFT, then boot to recovery and install Nameless. I will give you the links, once I uploaded to my dropbox.
Here, I hope will help you : https://www.dropbox.com/s/psniks1yvqwymy9/firmware v10a-europe-p970.rar
Click to expand...
Click to collapse
Thanks bro! Hope it works.
seby24gl said:
No, I don't tried to unlock bootloader, but like you , I got the bootloops every time I downgrade from ICS, Nameless or cyanogen roms . I use original Froyo - flashed with SFT , then upgrade to GB with Cwm recovery patch- flashed with SFT, then boot to recovery and install Nameless. I will give you the links, once I uploaded to my dropbox.
Here, I hope will help you : https://www.dropbox.com/s/psniks1yvqwymy9/firmware v10a-europe-p970.rar
Click to expand...
Click to collapse
JoKeR[RO-VL] said:
Thanks bro! Hope it works.
Click to expand...
Click to collapse
It's not working. Don't know what to try
UP! When I use the bootloader unlocker app the flashing process take about 2-3 seconds and the app closing by itself without any message like "succes". I even tried to flash a u-boot img uploaded by huexxx and at the second reboot the phone stucks on lg logo without flashing leds
JoKeR[RO-VL] said:
UP! When I use the bootloader unlocker app the flashing process take about 2-3 seconds and the app closing by itself without any message like "succes". I even tried to flash a u-boot img uploaded by huexxx and at the second reboot the phone stucks on lg logo without flashing leds
Click to expand...
Click to collapse
Did you already try the alternative way without the app? Which means load the files to your sdcard and afterwards type the dd if=xxxx of=xxxx? This could show if it works or fails. And did you ever flash the LU5900 port? So the early ICS ROM released by Redy, Gabwerkz and me. Try the manual unlock first.
Sent from my XT1052 using XDA Free mobile app
N00BY0815 said:
Did you already try the alternative way without the app? Which means load the files to your sdcard and afterwards type the dd if=xxxx of=xxxx? This could show if it works or fails. And did you ever flash the LU5900 port? So the early ICS ROM released by Redy, Gabwerkz and me. Try the manual unlock first.
Sent from my XT1052 using XDA Free mobile app
Click to expand...
Click to collapse
NO I did not flash the LU5900 port.Where do I need to type dd if ? I use windows 7 on my laptop.
JoKeR[RO-VL] said:
NO I did not flash the LU5900 port.Where do I need to type dd if ? I use windows 7 on my laptop.
Click to expand...
Click to collapse
As written in the thread, type it into terminal emulator (an app). Read the thread carefully please.
Sent from my XT1052 using XDA Free mobile app
N00BY0815 said:
As written in the thread, type it into terminal emulator (an app). Read the thread carefully please.
Sent from my XT1052 using XDA Free mobile app
Click to expand...
Click to collapse
OK I have the terminal emulator on my phone.
I've read the thread and it says "Move this two files, bootloader and recovery to the root of memory sdcard;
Enter in the command line
su
dd if=/sdcard/u-boot.img of=/dev/block/mmcblk0p2
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p4
And reboot or reboot recovery."
I have downloaded all on my laptop(bootloader recovery and su) but I am confuse....what's with that "su"?
Do I have to put it on the root of the sdcard too?
Sorry for my noob question

Categories

Resources