Database Develop

[Q] FAILED (remote: not allowed)

Hi guys,
I want to downgrade my firmware from 3.62 to 3.57due to battery drain problems in the new FW but I can't downgrade..
It sas:
FAILED (remote: not allowed)
I have S-OFF and I am unlocked (on hboot1.55).
Anyone know what I can do to downgrade??

check out htc1guru.com for info on how to downgrade
sent from my s-off 801n M7_UL

sorry guys... I was so stupid.. forgot to reboot into RUU mode lol... I feel stupid now

no worries m8 we all do it now and again
sent from my s-off 801n M7_UL

[HELP]What should I do ? Can't use RUU to restore!

I want to return my cellphone to the service center to repair my camera.But I s-off and unlock my device,so I want to s-on it back.However I only have the 1.29 hboot version RUU zip,and I upgraded my Hboot to 1.55 version and I s-on it and locked it now.And I trying to restore it by the RUU,it kept showing the 155 error. What should I do now , I can't get into the system now and the hboot showing the red title: security warning. Should I just send it to the service center? :crying::crying:

cycber said:
I want to return my cellphone to the service center to repair my camera.But I s-off and unlock my device,so I want to s-on it back.However I only have the 1.29 hboot version RUU zip,and I upgraded my Hboot to 1.55 version and I s-on it and locked it now.And I trying to restore it by the RUU,it kept showing the 155 error. What should I do now , I can't get into the system now and the hboot showing the red title: security warning. Should I just send it to the service center? :crying::crying:
Click to expand...
Click to collapse
You cannot downgrade on S-ON
try to unlock and gain s-off again

cycber said:
I want to return my cellphone to the service center to repair my camera.But I s-off and unlock my device,so I want to s-on it back.However I only have the 1.29 hboot version RUU zip,and I upgraded my Hboot to 1.55 version and I s-on it and locked it now.And I trying to restore it by the RUU,it kept showing the 155 error. What should I do now , I can't get into the system now and the hboot showing the red title: security warning. Should I just send it to the service center? :crying::crying:
Click to expand...
Click to collapse
You'll need to get s off using rumrunner again
To install the ruu you need to downgrade your hboot, which is only possible when you are s-off

stovie_steve said:
You'll need to get s off using rumrunner again
To install the ruu you need to downgrade your hboot, which is only possible when you are s-off
Click to expand...
Click to collapse
But after I re s-off my device,the RUU still can't use and keep showing Error 155.
And I tried to use fastboot flash it,it shows this:
sending 'zip' (1284373 KB)... OKAY
writing 'zip'... INFOrom parsing start ...
INFOrom parsing finish ...
INFOzip header checking...
INFOzip info parsing...
INFORead zipped android_info fail
FAILED (status read failed (Too many links))
What should I do now?
Thanks

cycber said:
But after I re s-off my device,the RUU still can't use and keep showing Error 155.
And I tried to use fastboot flash it,it shows this:
sending 'zip' (1284373 KB)... OKAY
writing 'zip'... INFOrom parsing start ...
INFOrom parsing finish ...
INFOzip header checking...
INFOzip info parsing...
INFORead zipped android_info fail
FAILED (status read failed (Too many links))
What should I do now?
Thanks
Click to expand...
Click to collapse
Maybe your MID or CID is different for the RUU?
What is your MID? Have you changed your CID for the RUU? And did you downgrade the hboot?
EDIT:
You are using hboot version 1.29? Surely 1.44 is the earliest hboot??

[Q] Can't change MID again

Hey guys! I was hoping I could get some help here, I would say I have moderate experience in this area but..
I was changing my Model ID. I got the ENG H-BOOT zip and edited the android-info.txt to my own device. I noticed some things different from the last time I did this. Instead of the fuzzy grey screen it actually had the bootloader showing up. It was the ENG bootloader and was a low version H-BOOT. I then issued the command:
Code:
fastboot oem writemid PN07120
after that I changed my CID and then proceeded to use the BrightStar US RUU for the Developer Edition. It told me:
Code:
FAILED (remote: 41 model id check fail)
Realizing my mistake, I made the zip again with the eng hboot and replaced the necessary variables. ie. modelid: PN07120 but when I try to flash it in RUU mode it still gives me the:
Code:
FAILED (remote: 41 model id check fail)
I keep on trying different combinations but to no avail.
I'd be very grateful if anyone could lend a helping hand. :fingers-crossed:

squabbi said:
Hey guys! I was hoping I could get some help here, I would say I have moderate experience in this area but..
I was changing my Model ID. I got the ENG H-BOOT zip and edited the android-info.txt to my own device. I noticed some things different from the last time I did this. Instead of the fuzzy grey screen it actually had the bootloader showing up. It was the ENG bootloader and was a low version H-BOOT. I then issued the command:
Code:
fastboot oem writemid PN07120
after that I changed my CID and then proceeded to use the BrightStar US RUU for the Developer Edition. It told me:
Code:
FAILED (remote: 41 model id check fail)
Realizing my mistake, I made the zip again with the eng hboot and replaced the necessary variables. ie. modelid: PN07120 but when I try to flash it in RUU mode it still gives me the:
Code:
FAILED (remote: 41 model id check fail)
I keep on trying different combinations but to no avail.
I'd be very grateful if anyone could lend a helping hand. :fingers-crossed:
Click to expand...
Click to collapse
I'll leave this here for now: http://forum.xda-developers.com/showthread.php?t=2535365
EDIT: you do KNOW that MID is more than 7 characters right ???

nkk71 said:
I'll leave this here for now: http://forum.xda-developers.com/showthread.php?t=2535365
EDIT: you do KNOW that MID is more than 7 characters right ???
Click to expand...
Click to collapse
Haha thanks! Ugh yea. I got carried away on something I saw that looked right. :\ Thanks for the link! It looks promising!

FAILED (remote: not allowed)

Hello! Please help me to solve this problem!
I'm not able to flash anything on my device and im always getting this error!
even RUU doesnt work.... im S-OFF and with unlocked bootloader

Rocker19943 said:
Hello! Please help me to solve this problem!
I'm not able to flash anything on my device and im always getting this error!
even RUU doesnt work.... im S-OFF and with unlocked bootloader
Click to expand...
Click to collapse
please post a full copy/paste of your command prompt

[Q] Downgrade (+ sim unlock) from 4.4.2

Hi,
I'm totally Helpless.... Im trying do perform sim unlock on my sprint HTC One for four days... My phone is rooted, custom recovery (TWRP), S-Off, Hboot is downgraded from 1.57 to 1.55, my bootloader is relocked, but i cant perform downgrade to 4.3 or 4.1... can anyone help me?
If I try to flash RUU, it says Error 155 and if I try to flash it via CMD it shows me FAILED (remote: 32 header error)...
I'm totally HOPELESS now

Try THIS

Thanks for reply,
I already tried (i think) All of guides here on XDA or other sites... link u provide shows me error" FAILED (remote: 32 header error)" while "pushing" rom into device...

SkopiX said:
Thanks for reply,
I already tried (i think) All of guides here on XDA or other sites... link u provide shows me error" FAILED (remote: 32 header error)" while "pushing" rom into device...
Click to expand...
Click to collapse
Did you re-lock your bootloader?
Did you use the correct RUU zip (decrypted)

Yea, my bootloader is RELOCKED and I think Yes, im using correct RUU
*** TAMPERED***
***RELOCKED***
s-OFF
CID- 11111111
HBOOT- 1.55
Radio- 1.00.20.0626 (i think i tried flash radio [some guide told me])
this is what I can see when i go to bootloader
//edit 2: finally succes i downloaded another RUU from htc1guru and finally it worked
//edit 3: now all works