hey guys my atrix hd stays in a loop in the bootanimation when I try to mount any rom from JB, I only work one ICS based roms, that problem will have, which peudo do to enjoy a superior version.
my atrix initially came with version 4.1.1 of at & t but I did release the bootloader and downgrade the Motorola Atrix HD Utility tool, JB to ICS 7.7.1Q-144_MB886_MR1-22_SIGNED_CFC from there or I could not upload any cooked rom Basda in JB with rom manager
You are sure you unlocked the bootloader? Are you using a custom recovery like cwm?
audit13 said:
You are sure you unlocked the bootloader? Are you using a custom recovery like cwm?
Click to expand...
Click to collapse
of course, the bootloader is unlocked, I had already installed before holoblur rom but after a day they reset the phone and it was not the bootanimation so due back to Atrix HD Utility tool to version and from there ICS from any version JB I work, apartede that the proximity sensor and the lighting stopped working
ljrg said:
of course, the bootloader is unlocked, I had already installed before holoblur rom but after a day they reset the phone and it was not the bootanimation so due back to Atrix HD Utility tool to version and from there ICS from any version JB I work, apartede that the proximity sensor and the lighting stopped working
Click to expand...
Click to collapse
U need to rsd lite the phone or use myth tools to flash stock. Please search for the guide
jram0421 said:
U need to rsd lite the phone or use myth tools to flash stock. Please search for the guide
Click to expand...
Click to collapse
I have already used rsd lite to flash the stock version:
-->Mexican (MB886_niimx-user-4.1.2-9.8.2Q-50_MB886_NII_TA-2-16-release-keys-NII-MX.xml)
--->at&t (MB886_att-user-4.1.1-9.8.0Q-97_MB886_FFW-20-27-release-keys-ATT-US_BuildA.xml)
but at the end of the process is also a loop at bootanimation. so with the MhyTools,
The only tool has worked for me is the Motorola_Atrix_HD_Utility which leaves me the device in the ICS version of at&t (7.7.1Q-144_MB886_MR1-22_SIGNED_CFC.xml) is functional except for proximity sensors and lighting.
ljrg said:
I have already used rsd lite to flash the stock version:
-->Mexican (MB886_niimx-user-4.1.2-9.8.2Q-50_MB886_NII_TA-2-16-release-keys-NII-MX.xml)
--->at&t (MB886_att-user-4.1.1-9.8.0Q-97_MB886_FFW-20-27-release-keys-ATT-US_BuildA.xml)
but at the end of the process is also a loop at bootanimation. so with the MhyTools,
The only tool has worked for me is the Motorola_Atrix_HD_Utility which leaves me the device in the ICS version of at&t (7.7.1Q-144_MB886_MR1-22_SIGNED_CFC.xml) is functional except for proximity sensors and lighting.
Click to expand...
Click to collapse
Why not flash the ics then do ota update?
jram0421 said:
Why not flash the ics then do ota update?
Click to expand...
Click to collapse
of course, since I have ICS. The one I have running but when I do update midway gives me error, get the android snowman with a red triangle and ends the installation again and again is ICS
ljrg said:
of course, since I have ICS. The one I have running but when I do update midway gives me error, get the android snowman with a red triangle and ends the installation again and again is ICS
Click to expand...
Click to collapse
Does it tell you what the error is?
jram0421 said:
Does it tell you what the error is?
Click to expand...
Click to collapse
anything, download the update via OTA, but when the installation is restarted on M logo, as if the install with rsd lite and mhytools com. not pass the M stays in a loop and restarts.
rsd lite but could mount the ICS rom version of at & t (7.7.1Q-144_MB886_MR1-22_SIGNED_CFC.xml) which starts and runs if I do not understand well because I can not install or upgrade JB stock or cooked rom
someone with a possible solution?, I flash a rom from JB or kikat
either stock or cooked
ljrg said:
someone with a possible solution?, I flash a rom from JB or kikat
either stock or cooked
Click to expand...
Click to collapse
Can you install a different recovery, CWM or Phils and try a factory reset, then install new rom from recovery.
When doing rsd lite do you edit the xml, it may cause some issue.
I know the solution, but I can't explain why:
First, you need to flash the full MEXICAN RETAIL FIRMWARE, then, just flash the custom recovery of your preference, flash any JB ROM, and thats all...
The Mexican Retail firmware has some kind of boot or something, I don't know exactly which files are, that are the same as the RAZR HD, which all the ATRIX HD ROMs are based of... just try it.
I attached the custom XML file for the mexican firmware, replace that and after the flashing, install your custom recovery and try a ROM, you can reboot safelly and without problems, I know there a short solution, you don't have to flash the entire firmware, but I don't know which files are the essential ones... See ya
Hey, i have done some hunting around but have not found anything. I am looking for a compatible firmware version that will allow me to flash a custom rom. i have tried a few roms for this phone but all came up saying that its not the right firmware. Is there anyone that has successfully flashed this firmware and running a custom rom. Mainly looking at cyanogenmod, or a 4.4 version that is stable with full functionality
kirkby666 said:
Hey, i have done some hunting around but have not found anything. I am looking for a compatible firmware version that will allow me to flash a custom rom. i have tried a few roms for this phone but all came up saying that its not the right firmware. Is there anyone that has successfully flashed this firmware and running a custom rom. Mainly looking at cyanogenmod, or a 4.4 version that is stable with full functionality
Click to expand...
Click to collapse
Have you actually rooted the phone so you can load custom roms?
kirkby666 said:
Hey, i have done some hunting around but have not found anything. I am looking for a compatible firmware version that will allow me to flash a custom rom. i have tried a few roms for this phone but all came up saying that its not the right firmware. Is there anyone that has successfully flashed this firmware and running a custom rom. Mainly looking at cyanogenmod, or a 4.4 version that is stable with full functionality
Click to expand...
Click to collapse
Post does not make sense .
firmware does not flash a custom rom and plays no part in the custom rom you choose .
The only difference is in network access where you may need to change modem .
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
UNDERSTAND FIRST
http://forum.xda-developers.com/showthread.php?t=2362743
Network IMEI EFS
http://forum.xda-developers.com/showthread.php?t=2393289
I tried flashing a rom to my Note 3... I unfortunately skipped the backup step, and now have a device with no OS... when I try to flash a ROM I am getting two codes...
E:Footer is wrong
E:signature verification failed...
please help
aubreysdad09 said:
I tried flashing a rom to my Note 3... I unfortunately skipped the backup step, and now have a device with no OS... when I try to flash a ROM I am getting two codes...
E:Footer is wrong
E:signature verification failed...
please help
Click to expand...
Click to collapse
if you where on jb or leaked kk use this http://forum.xda-developers.com/showthread.php?t=2559715 if you where on official kk use this http://forum.xda-developers.com/showthread.php?t=2703006 what rom where you trying to flash
jerrycoffman45 said:
if you where on jb or leaked kk use this http://forum.xda-developers.com/showthread.php?t=2559715 if you where on official kk use this http://forum.xda-developers.com/showthread.php?t=2703006 what rom where you trying to flash
Click to expand...
Click to collapse
firenote... im new to all of this... ive been jailbreaking iphones for a while... this is a little more advanced...
Just remember to use the right version of safestrap for your phone there is one for jb and one for kk also you can't mix and match roms with firmware if your phone has jb you can only flash jb roms and if you are on kk you can only flash kk roms since you are new to this I would suggest you do a lot of reading first
jerrycoffman45 said:
Just remember to use the right version of safestrap for your phone there is one for jb and one for kk also you can't mix and match roms with firmware if your phone has jb you can only flash jb roms and if you are on kk you can only flash kk roms since you are new to this I would suggest you do a lot of reading first
Click to expand...
Click to collapse
I did the same thing I had everything working right but tried to install custom rom on stock rom slot erased stock rom but rebooted so not it want reboot back to safestrapp. I think I deleted that too..
cook23 said:
I did the same thing I had everything working right but tried to install custom rom on stock rom slot erased stock rom but rebooted so not it want reboot back to safestrapp. I think I deleted that too..
Click to expand...
Click to collapse
Use one of the links in post 2
Hi there. Forgive me, but I'm new here.
Some time ago I flashed my i9000 with CyanogenMod, which means I obviously had to unlock the bootloader and install CWM recovery. The problem is I've forgotten alot,
Do roms have modems with them, or do I need to do that myself? Which i9000 modem is best for the UK? Reception is poor under CyanogenMod. I was planning to flash an unofficial build of Omnirom 5.5.1 for the i9000, does this include the latest modem files?
I've tried looking for TWRP but I'm unable to find it, I was planning to replace CWM.
What about the bootloader, is this included in Omnirom or do I need to find that too?
I apologize.
Only some roms comes with modem files. Omni has modem files in the zip. So u can flash
Its better flash any kitkat first
Eg: slimkat
Then flash omni. Because directly flashing the lollipop may not work or you will lose baseband
Ok good luck
I have a Droid Turbo already rooted with BHB27's Oreo ROM, works awesome. So I got my son the same phone and went about trying to root it and install the same ROM. I had software bricked it but used RSDLite and got a stock ROM installed and now I can boot into Marshmallow. But now the wi-fi doesn't work. I have tried flashing different radios and modems with no luck. I need the wi-fi to work so that I can download sunshine and connect so that sunshine can root. Any advice on how to get the wi-fi working? It might be the wrong stock ROM, but I can boot it. It was previously on Marshmallow 6.0.1 prior to all of this so if anyone has a link to the correct stock ROM I can try and flash it. I have downloaded so many "stock" ROMS I'm not sure which was is the proper one.
Thanks for any advice. Any questions just ask.
drtweakllc said:
I have a Droid Turbo already rooted with BHB27's Oreo ROM, works awesome. So I got my son the same phone and went about trying to root it and install the same ROM. I had software bricked it but used RSDLite and got a stock ROM installed and now I can boot into Marshmallow. But now the wi-fi doesn't work. I have tried flashing different radios and modems with no luck. I need the wi-fi to work so that I can download sunshine and connect so that sunshine can root. Any advice on how to get the wi-fi working? It might be the wrong stock ROM, but I can boot it. It was previously on Marshmallow 6.0.1 prior to all of this so if anyone has a link to the correct stock ROM I can try and flash it. I have downloaded so many "stock" ROMS I'm not sure which was is the proper one.
Thanks for any advice. Any questions just ask.
Click to expand...
Click to collapse
You will need To goo back to the sunshine thread and see which 6.0.1 is still rootable ...