Unable to install Safestrap - N900A - AT&T Galaxy Note 3 Q&A, Help & Troubleshooting

Hi All,
I shattered the screen on my Note 2 so I picked up a Note 3 (KK 4.4.2... stock ROM) yesterday. I've rooted it using towelroot and now want to install a custom ROM to clear out some of this stock crap on here. Anyhow, I've got Busybox, SuperSU and SELinux installed and am now having issues installing Safestrap. No matter which version I try (v3.71, 3.72 and even 3.75) I am unable to "Install Recovery". It goes through the actions to 100% and even says that it's completed the installation, but the State always stays at "Not installed". Nothing is showing up on the splash page either, so at this point I'm kinda stuck.
Any ideas here????

Got it figured out. Found in another thread a few pages in that someone else had the same problem. Didn't realize that after "installing" BusyBox, you had to actually go into it and "INSTALL" it. LOL! Got into Safestrap 3.75 now w/o issue...

Thanks bro
Ninjazx71 said:
Got it figured out. Found in another thread a few pages in that someone else had the same problem. Didn't realize that after "installing" BusyBox, you had to actually go into it and "INSTALL" it. LOL! Got into Safestrap 3.75 now w/o issue...
Click to expand...
Click to collapse
Thanks bro.. I tried and tried... I almost down grade... anyways most ppl should no that's the problem

Mine is still not working, I installed thousands of times but still no safestrap showing...FML
---------- Post added at 04:52 PM ---------- Previous post was at 04:44 PM ----------
madindian66 said:
Thanks bro.. I tried and tried... I almost down grade... anyways most ppl should no that's the problem
Click to expand...
Click to collapse
I'm using a JB and installed 3.71. After installing thousands of times Busybox. My safestrap is still not working. The choosing screen is still not showing....WHY?!

Related

[SOLVED 2.07][BUG 1.94]: endless loading of apps and logs fragments

Thread specifically about finding and solving the issue that some are seeing where the apps and logs screen of SuperSU will load indefinitely, while su access does keep working.
r25txe said:
Hi @Chainfire
I just tried the 2.04BETA to see if my issue was resolved, to no avail.
I was wondering have you had any reports of certain settings not being configurable and the "apps" and "logs" tabs endlessly refreshing, i.e., you cannot see what apps you have approved or denied.
My root does work, I can approve or deny requests normally, it's just I cannot go back if I want to reconfigure an app's root access or review logs. Unchecking the refresh app and logs automatically has no effect.
In the settings, uninstall SuperSU will not work, causes an eventual crash of SuperSU (after quite some time) unless you do a reboot. SuperSU will still be there, too.
I'm a Pro user and unable to set a PIN either as SuperSU will just circle endlessly after trying to set one.
I've been reading about other users' issues mostly related to root access itself, but my issues seem to be interface only.
---------- Post added at 01:30 AM ---------- Previous post was at 01:19 AM ----------
Oh, my ..!
It's working now, I just did another reboot (because SuperSU had become stuck again) and on reboot all was working! :good:
:blush:
I'll redownload the licence and test Pro features tomorrow and report back.
Click to expand...
Click to collapse
r25txe said:
All the issues I described are back now.
With or without licence.
Will continue trying/testing see if I can get a pattern.
This is persisting across four phones, one on Gingerbread.
Click to expand...
Click to collapse
mathuaerknedam said:
I'm also seeing this, in 1.94 and 2.02, but I've not yet tried the 2.04 beta. Sometimes it works. I've tried all sorts of different things to identify a pattern, but I've had no luck.
I've also one instance, just last night, of SuperSU requesting root privileges for itself. I can post a screenshot and some log data if that would help.
Sent from my Nexus S 4G using XDA Free mobile app.
Click to expand...
Click to collapse
xlollomanx said:
Same issue I have, is presented from any version after 1.94. However it does not happen always: sometimes shows granted superuser app sometimes not, happens random.
Click to expand...
Click to collapse
It'd be great if we can get a recap of which SuperSU versions, which devices and kernels and firmwares, are affected. Any information you have is welcome. Let's get this issue sorted out.
@Chainfire So I'll start. I own a Galaxy W with unofficial Cyanogenmod 11 ( http://forum.xda-developers.com/showthread.php?t=2588495) and now I'm using this kernel http://forum.xda-developers.com/showthread.php?t=2593027 (I' ve tried also with stock kernel but the problem persist and is the same). I used SuperSU for years and worked perfectly until v1.94. When I installed v2.0 the problem starts. After that I updated to 2.01 and I tried some beta like 2.04 and 2.05 but the problem still persist.
I hope this can help you, thanks for support.
EDIT: Some kind of Log could help you?
xlollomanx said:
@Chainfire So I'll start. I own a Galaxy W with unofficial Cyanogenmod 11 ( http://forum.xda-developers.com/showthread.php?t=2588495) and now I'm using this kernel http://forum.xda-developers.com/showthread.php?t=2593027 (I' ve tried also with stock kernel but the problem persist and is the same). I used SuperSU for years and worked perfectly until v1.94. When I installed v2.0 the problem starts. After that I updated to 2.01 and I tried some beta like 2.04 and 2.05 but the problem still persist.
I hope this can help you, thanks for support.
EDIT: Some kind of Log could help you?
Click to expand...
Click to collapse
How did you update? Via in-app, Play store, or exclusively ZIP updates? Which recovery are you using? Have you tried making a backup, wiping, and install SuperSU cleanly - does the issue persist?
I've definitely seen this with SuperSU 2.02, and I believe I also saw it with 1.94 (but I can't recall for certain). I've not yet tried 2.04 beta.
I'm using the device, rom, and recovery in my sig. I've see this with several different kernels, including the one in my sig, Marmite 10.6/10.5/10.4/10.3, Matr1x 25 cfs and bfs, Devil Kernel 20131025_VC and Air Kernel Weekly r350.
When I flash a kernel, cwm asks if I want to "fix root". I've reboot both fixed and unfixed, and it doesn't seem to matter.
What else can I try or provide?
Chainfire said:
How did you update? Via in-app, Play store, or exclusively ZIP updates? Which recovery are you using? Have you tried making a backup, wiping, and install SuperSU cleanly - does the issue persist?
Click to expand...
Click to collapse
Now I'm using CWM recovery based (6.0.5.0)
I tested the v1.94 and update v2.0 on a " old rom". Few days later, thinking was my device problem's I performed a full wipe with pristine and installed v2.0 directly from play store, so I could try a cleanly installation of SuperSU (but the problem persist). Here I tried all new versions (I also tried the v1.94, which worked fine, but mainly to uninstall the newer version's as I will explain below) but without success.
I tried in different ways:
I downgraded to v1.94(replacing supersu with root explorer), uninstalled SuperSU, reistalled v1.94(via in-app) and then updated to 2.0 and then v2.01 when update came out from play store.
I downgraded again to v1.94(replacing supersu with root explorer), uninstalled SuperSU and then installed v2.0 from zip-updates. Also tried flashing directly over v1.94 ,without uninstall, from recovery with zip-updates.
I downgraded again to v1.94(replacing supersu with root explorer), uninstalled SuperSU and then installed v2.02 from zip-updates. Also tried flashing directly over v1.94 ,without uninstall, from recovery with zip-updates.
I tried v2.04 and v2.05 with zip-update from recovery by flashing directly over v2.02(this v2.02 is a result from previous test).
I uninstalled SuperSU by replacing supersu with root explorer, installed via in-app v1.94(that work perfectly) and then installed 2.04.
I hope I have answered in the right way in all your questions.
Regards
I have similar bug. I am on SE xperia GB ROM and all previous versions below 2.00 were working fine. After that I started to notice various problems.. For ex. on 2.00+ versions I was always getting "update su binary" notification. I tried to update it in both ways and both were sucessufull and root was working but i still was getting that notification. On last beta (2.05) root stopped to work and all root apps are loading continuously... when I enter to supersu app I get a notification that there is no su binary (but it exists). I install supersu on clean rom from recovery.. Here is the source code..for reference..
https://github.com/feravolt/feralab
Thank you.
Been playing around, haven't replicated so far. A common theme seems to be CM and CWM, though it works fine in my own testing still... sigh.
mathuaerknedam said:
I've definitely seen this with SuperSU 2.02, and I believe I also saw it with 1.94 (but I can't recall for certain). I've not yet tried 2.04 beta.
I'm using the device, rom, and recovery in my sig. I've see this with several different kernels, including the one in my sig, Marmite 10.6/10.5/10.4/10.3, Matr1x 25 cfs and bfs, Devil Kernel 20131025_VC and Air Kernel Weekly r350.
When I flash a kernel, cwm asks if I want to "fix root". I've reboot both fixed and unfixed, and it doesn't seem to matter.
What else can I try or provide?
Click to expand...
Click to collapse
Which installation method do you use for busybox? As I recall, the app you use provides several different methods.
Chainfire said:
Which installation method do you use for busybox? As I recall, the app you use provides several different methods.
Click to expand...
Click to collapse
I just clicked the big install button for a regular install.
Sent from my Nexus S 4G using XDA Free mobile app
Chainfire said:
Which installation method do you use for busybox?
Click to expand...
Click to collapse
That seems like a probable culprit. Maybe if someone installed your version of 'busybox' we might see a difference.
Frank
Installed BusyBox as well ... still working for me ...
Can you guys having this issue post your /data/data/eu.chainfire.supersu/files/supersu.cfg file ?
Very important 3d
Inviato dal mio SM-G900F X-Note 5.0 con Tapatalk
Nothing here
FeraVolt said:
I have similar bug. I am on SE xperia GB ROM and all previous versions below 2.00 were working fine. After that I started to notice various problems.. For ex. on 2.00+ versions I was always getting "update su binary" notification. I tried to update it in both ways and both were sucessufull and root was working but i still was getting that notification. On last beta (2.05) root stopped to work and all root apps are loading continuously... when I enter to supersu app I get a notification that there is no su binary (but it exists). I install supersu on clean rom from recovery.. Here is the source code..for reference..
https://github.com/feravolt/feralab
Click to expand...
Click to collapse
These issues are not related, as the problem we're discussing only applies to Android with SELinux, which Gingerbread doesn't have.
Let me know if v2.06 BETA solved the problem, please!
@r25txe @mathuaerknedam @xlollomanx
Chainfire said:
Let me know if v2.06 BETA solved the problem, please!
Click to expand...
Click to collapse
It works!!!
The problem was never entirely consistent, so I'll keep checking and report back. But so far, so good!
Sent from my Nexus S 4G using XDA Free mobile app
Chainfire said:
Let me know if v2.06 BETA solved the problem, please!
@r25txe @mathuaerknedam @xlollomanx
Click to expand...
Click to collapse
Hi @Chainfire
I just flashed 2.0.5 and the problem is persisting after two full reboots.
What kind of logs would be useful to you if you need them?
r25txe said:
Hi @Chainfire
I just flashed 2.05 and the problem is persisting after two full reboots.
What kind of logs would be useful to you if you need them?
Click to expand...
Click to collapse
Flash 2.06 ?
Did you mistype, or ? If you are actually on 2.06 then I'll have to think some more what the issue could be and how to trace it...
Oh, dear.
I am clearly much too tired to be on XDA! I only noticed that you posted 2.0.6. I will try it after work tomorrow, really need to crash now.
---------- Post added at 12:56 AM ---------- Previous post was at 12:52 AM ----------
Oh, I see you´re online, I will flash it right now ...
---------- Post added at 01:02 AM ---------- Previous post was at 12:56 AM ----------
2.06 works!!
(Although, 2.0.4 did this to me, too)
We´ll see how we get on tomorrow
Thank you, @Chainfire
---------- Post added at 01:08 AM ---------- Previous post was at 01:02 AM ----------
Not sure its of use, but here is the cfg file after the flash of 2.06.
https://www.dropbox.com/s/2s3kircndbfjqmm/supersu.cfg?dl=0

Getting started

Received mine earlier today, and I have already rooted and installed Google services. The first thing you want to do is pick up the developer rom from Mi if it's not already installed. The numerical versions are different, but both are MIUI 6. Follow the recommended procedure. Once that's done, use the mistore and search for SuperSU, and the familiar shield should appear. Install it, and it should ask for root permissions. Allow it, update the binary, and from there you can start the process of getting Google onto the phone. In the interest of saving you time and possibly a headache, this will get you started. Since you'll probably want to take a break after this, leave a comment or any questions you may have and I'll get back to you.
--!!UPDATE!!-- Please see my latest reply!
Do you have power setting in which you can select performance mode ?
Sent from my SM-N910T using Tapatalk 2
Which developer rom did use that is already rooted?
ahmadhammad said:
Which developer rom did use that is already rooted?
Click to expand...
Click to collapse
All dev roms should be pre-rooted... i think
Kahun said:
All dev roms should be pre-rooted... i think
Click to expand...
Click to collapse
Thanks
I have tried the apk, downloaded the app but I get a force closed.
---------- Post added at 04:10 PM ---------- Previous post was at 03:30 PM ----------
jeux_1 said:
I have tried the apk, downloaded the app but I get a force closed.
Click to expand...
Click to collapse
reset, tried again, worked. thanks !
Thanks for the heads up, mine here tomorrow.:good:
---------- Post added at 08:52 PM ---------- Previous post was at 08:38 PM ----------
kibmikey1 said:
Received mine earlier today, and I have already rooted and installed Google services. The first thing you want to do is pick up the developer rom from Mi if it's not already installed. The numerical versions are different, but both are MIUI 6. Follow the recommended procedure. Once that's done, use the mistore and search for SuperSU, and the familiar shield should appear. Install it, and it should ask for root permissions. Allow it, update the binary, and from there you can start the process of getting Google onto the phone. In the interest of saving you time and possibly a headache, this will get you started. Since you'll probably want to take a break after this, leave a comment or any questions you may have and I'll get back to you.
Click to expand...
Click to collapse
Where do you get the developer rom ?
jazz452 said:
Thanks for the heads up, mine here tomorrow.:good:
---------- Post added at 08:52 PM ---------- Previous post was at 08:38 PM ----------
Where do you get the developer rom ?
Click to expand...
Click to collapse
en.miui.com. It's in the downloads section.
Install TWRP, install latest (non-developer!) rom, GApps and root - ~5 minute version:
Thanks to the outstanding work from folks at MIUI forums, TWRP is now available to install via fastboot (fastboot flash recovery _insert .img name here_). Since you'll be able to achieve root without needing the native functionality, you can pick up the latest update from Mi if you like. Ever in the interest of saving you time, you can pick up the GApps package here . It didn't flash via TWRP for me, but I unzipped it and installed everything with no issues via the pre-installed file explorer. At this point, I downloaded the latest SuperSU beta and installed it via TWRP to update the binary from TWRP installation. I'm currently messing with QPST and QXDM settings and will update with any findings to report.
I manage to install Gapps 64 bit and works flawlessly
skw5115 said:
en.miui.com. It's in the downloads section.
Click to expand...
Click to collapse
Mine came with playstore already installed. From topresellerstore.it
jazz452 said:
Mine came with playstore already installed. From topresellerstore.it
Click to expand...
Click to collapse
The seller probably installed a different ROM. Mine came with a ton of bloat ware. First thing I did was wipe the phone and install the ROM directly from en.miui
I can't send text message from any other sms application beside the preinstalled app. I get a message about connection not available.
Anybody can help?
jeux_1 said:
I can't send text message from any other sms application beside the preinstalled app. I get a message about connection not available.
Anybody can help?
Click to expand...
Click to collapse
have you tried to change default SMS app ?
settings/installed apps/defaults
yes, it doesn't work, I would have any sms app set as default but no luck, I guess I am the only one with this issue so I will have to keep on searching
---------- Post added at 10:03 AM ---------- Previous post was at 09:51 AM ----------
reinstalled again and finally worked, well textra doesn't support dual sim card
jeux_1 said:
yes, it doesn't work, I would have any sms app set as default but no luck, I guess I am the only one with this issue so I will have to keep on searching
---------- Post added at 10:03 AM ---------- Previous post was at 09:51 AM ----------
reinstalled again and finally worked, well textra doesn't support dual sim card
Click to expand...
Click to collapse
I had trouble something from google on the playstore sorted it, can't remember what though may of been google framework.
jeux_1 said:
yes, it doesn't work, I would have any sms app set as default but no luck, I guess I am the only one with this issue so I will have to keep on searching
---------- Post added at 10:03 AM ---------- Previous post was at 09:51 AM ----------
reinstalled again and finally worked, well textra doesn't support dual sim card
Click to expand...
Click to collapse
I had the same problem, what you need to do is go to the security short cut on your home screen then permission then again permission scroll to your sms app and give it permission to send and receive.
Thanks, it worked but I find the default app actually better for dual sim card & selecting quickly which number to use is useful for my work.
I am having trouble getting root. I have downloaded and flashed the developer rom from the Xiaomi site without any issues. I have also gotten all google apps to install and function without any issues, but I can't get SuperSU to update the binaries, it always fails. A rootcheck application confirms that I do not have root access. What am I doing wrong? Do I have to install SuperSU from the recovery menu instead of from inside the android environment? Any help is appreciated. Take care guys.
JeffSGeorge said:
I am having trouble getting root. I have downloaded and flashed the developer rom from the Xiaomi site without any issues. I have also gotten all google apps to install and function without any issues, but I can't get SuperSU to update the binaries, it always fails. A rootcheck application confirms that I do not have root access. What am I doing wrong? Do I have to install SuperSU from the recovery menu instead of from inside the android environment? Any help is appreciated. Take care guys.
Click to expand...
Click to collapse
You do not need to use super su just go to security application > permissions > root access and grant the application that needs root root access.

Lost root access after a week, possibly by entering "smart manager"

I got a note 5 SM-N920W8 Telus last week. First thing i did was to upgrade to marshmallow, and then root it. I rooted it fine, wiping the phone in the process of installing the custom recovery. Now i've used plenty of apps that require root, and all have worked fine. About 15 minutes ago I try to go in "Ad away" to disable it temporarily to check if firefox was gonna to react faster on loading pages (it seemed so fast last week, but sluggish lately) only to find out Ad away is complaining I dont have root access anymore. So I go and check in SU , and sure enough, he also complains I don't have root. Marshmallow 6.0.1
Who deleted my root?
The only thing different I recall doing on my phone recently, and could coincide with me not noticing it between 2 apps that need root, was that in the settings, I went into "Smart manager". In there, I was curious to see what this "Device Security" (deactivated) could hold.
Anyone else has had their root removed? Or is there anything else I should look out for , background process or something , that targets my root? I just reflashed it, and it works fine again, but that just never happened to me before..
I have the same problem?? Did you get any answer from any body? Do I have to re root again?
Just flash super su in recovery. Same thing happened to me and i don't know what is the cause of the problem
Roamin64 said:
I got a note 5 SM-N920W8 Telus last week. First thing i did was to upgrade to marshmallow, and then root it. I rooted it fine, wiping the phone in the process of installing the custom recovery. Now i've used plenty of apps that require root, and all have worked fine. About 15 minutes ago I try to go in "Ad away" to disable it temporarily to check if firefox was gonna to react faster on loading pages (it seemed so fast last week, but sluggish lately) only to find out Ad away is complaining I dont have root access anymore. So I go and check in SU , and sure enough, he also complains I don't have root. Marshmallow 6.0.1
Who deleted my root?
The only thing different I recall doing on my phone recently, and could coincide with me not noticing it between 2 apps that need root, was that in the settings, I went into "Smart manager". In there, I was curious to see what this "Device Security" (deactivated) could hold.
Anyone else has had their root removed? Or is there anything else I should look out for , background process or something , that targets my root? I just reflashed it, and it works fine again, but that just never happened to me before..
Click to expand...
Click to collapse
Im having similar issues. 6.0.1 on my tmo note 5 rooted perfectly using Max Lee's method. However as soon as I rooted and transfered all my data back I did a nandroid backup. Happen to wipe my phone the other night and and restored the nandroid backup and as soon as it restored I lost root. Happens everytime I restore even a newer nandroid in twrp. Never had this happen on any root method on any note.
WTF..
It's happened again this morning.. Root dissapeared by itself. The only recent thing I can think I did , was buying a game (The cave) from play store last night.
Any way to identify what is removing SU ?
Flash SuperSU 2.74 and delete 'SecurityLogAgent'
I also lost root
I have a Samsung Galaxy Note 5 on the Sprint Network. I just now noticed that my applications that require root access, including Titanium Backup are reporting that my device is no longer rooted. Weird. This has never happened in the past when I had rooted Samsung phones. I will re-flash the Super User file as instructed in this thread and see if that resolves the issue.
---------- Post added at 03:01 AM ---------- Previous post was at 02:32 AM ----------
Per your insstuctions, I reflashed SuperSU 2.74 using TWRP. Then once my Note 5 rebooted, I launched Titanium Backup and found "SecurityLogAgent" and uninstalled it. However, in order for me to access TWRP I have to reinstall it using ODIN and immediately after I get the green "PASS" light in ODIN I have to quickly do the 'three finger' button press to launch TWRP. Weird....
Anyway, so far so good.
Thank you.
Battlehero said:
Flash SuperSU 2.74 and delete 'SecurityLogAgent'
Click to expand...
Click to collapse
Has a permanent solution been found? I am suffering the same inexplicable loss of root. International N910F on stock.
Bosbouer said:
Has a permanent solution been found? I am suffering the same inexplicable loss of root. International N910F on stock.
Click to expand...
Click to collapse
Yes, follow Battlehero's instructions (post #6) worked fine for me.
Roamin64 said:
Yes, follow Battlehero's instructions (post #6) worked fine for me.
Click to expand...
Click to collapse
Thanks that worked to a certain extent. Titanium requesting root privileges for backup would still pop up as failed. Checking root would show as unrooted. The Superuser app was updated on the 5th of July 2016. Since I applied that update, i have not lost root on any of my devices.

XPOSED Framework Install - Galaxy S4 SCH-I545 (OF1) Flashfire

I've been reading thousands of forum entries on how to install the xposed framework for my device and I can't seem to get it. They all end the same way -- stuck at the Verizon logo screen.
I am using a Verizon Samsung Galaxy S4 on stock Lollipop (5.0.1). I only have the stock bootloader thanks to it being locked before I laid hands on the device, but I do have Flashfire, Root, SuperSU. Each time I fail, I use ODIN to flash I545VRUGOF1_I545VZWGOF1_I545VRUGOF1_HOME.tar and try again.
I have tried using a deodexed rom by flashing the above with ODIN, then using Flashfire to OTA update: I545_OF1_Stock_Rooted_Deodexed_ROM.zip
Next, install the XposedInstaller_3.0_alpha4.apk
I then tried flashing:
xposed-v71-sdk21-arm-arter97-V6-snapdragon
xposed-v75-sdk21-arm-arter97-snapdragon
xposed-v86-sdk21-arm
They all result in freezing on the Verizon logo during boot.
I can flash xposed-sdk21-arm-20150430-arter97 on to the deodexed rom and it will work, but the Xposed Installer says it's not the most recent and all modules yield the same error:
This module requires a newer XposedBridge version (30) and thus cannot be activated.
Then I try with the stock rom (odexed).
I can flash:
xposed-v71-sdk21-arm-arter97-V6-snapdragon
xposed-v75-sdk21-arm-arter97-snapdragon
xposed-v86-sdk21-arm
Without a crash; So long as the XposedInstaller_3.0_alpha4.apk is not installed. If I install the XposedInstaller then try to flash, it hangs on the Verizon logo during boot.
Finally, if I flash the zips first, then reboot and install the XposedInstaller it will yield me the same result of not the most recent version and I get the requires newer bridge for all modules.
Because it's an S4 there are hundreds of forums and guides, but I can't find one that applies to me. That makes me either the worst internet researcher in the world -- or I'm missing something so obvious that it's embarrassing...well, humiliating.
Can anyone offer a suggestion? ...and yes, I've read every read only forum to the last line and every XDA Lollipop forum. I've reflashed my phone almost two dozen times trying different suggestions with absolutely no luck.
I was having similar issues trying to get xposed on 5.0.1.
Long story short I gave up and flashed 5.1.1 onto my Note 4 and used wanam's custom xposed framework.
Galaxy S4
I don't believe there is a stock 5.1 firmware for the Galaxy S4. More importantly, I have to believe you can install Xposed on the S4. I just hate feeling like I'm missing something so simple!!
DemoMatrix said:
I don't believe there is a stock 5.1 firmware for the Galaxy S4. More importantly, I have to believe you can install Xposed on the S4. I just hate feeling like I'm missing something so simple!!
Click to expand...
Click to collapse
I have a i545 with locked boot loader I used flashfire to flash XposedInstaller_3.0_alpha4 and xposed-v85.0-samsung-5.0.x-sdk21-test-by-dkcldark.zip and it has been working fine for me, I thought my phone was froze on the Verizon splash screen on the first restart so I pulled the battery and tried starting the phone again and it started like normal
krusherkills123 said:
I have a i545 with locked boot loader I used flashfire to flash XposedInstaller_3.0_alpha4 and xposed-v85.0-samsung-5.0.x-sdk21-test-by-dkcldark.zip and it has been working fine for me, I thought my phone was froze on the Verizon splash screen on the first restart so I pulled the battery and tried starting the phone again and it started like normal
Click to expand...
Click to collapse
I think I might love you.
I haven't seen that v85 file anywhere. I'm going to go search for it now. Thank you!
krusherkills123 said:
I have a i545 with locked boot loader I used flashfire to flash XposedInstaller_3.0_alpha4 and xposed-v85.0-samsung-5.0.x-sdk21-test-by-dkcldark.zip and it has been working fine for me, I thought my phone was froze on the Verizon splash screen on the first restart so I pulled the battery and tried starting the phone again and it started like normal
Click to expand...
Click to collapse
That went faster than I expected. Going to give it a flash now.
Well, thank you for the effort.
It flashed very quickly and then rebooted without a problem, but the Xposed Installer still shows, "The Xposed framework is not installed. Please download the latest ZIP file from XDA and flash it manually via recovery." and all the modules say, "..requires a newer XposedBridge version (30) and thus cannot be activated".
I don't suppose you'd be willing to use FlashFire to make a full backup (minus your cache, of course) to share?
Well, thank you for the effort.
It flashed very quickly and then rebooted without a problem, but the Xposed Installer still shows, "The Xposed framework is not installed. Please download the latest ZIP file from XDA and flash it manually via recovery." and all the modules say, "..requires a newer XposedBridge version (30) and thus cannot be activated".
I don't suppose you'd be willing to use FlashFire to make a full backup (minus your cache, of course) to share?
UR 31337
krusherkills123 said:
I have a i545 with locked boot loader I used flashfire to flash XposedInstaller_3.0_alpha4 and xposed-v85.0-samsung-5.0.x-sdk21-test-by-dkcldark.zip and it has been working fine for me, I thought my phone was froze on the Verizon splash screen on the first restart so I pulled the battery and tried starting the phone again and it started like normal
Click to expand...
Click to collapse
Thank you! I uninstalled Xposed Installer and rebooted. Reinstalled Xposed Installer, rebooted, then flashed the file again. Upon that reboot it did the, "Upgraded file xx of xx" and now it's installed!
I can't thank you enough!
View attachment xposed-v65-sdk21-arm-arter97-V5-krait.zip
View attachment de.robv.android.xposed.installer_v33_36570c-1.apk
The Wanam Module is the only thing that I've used.
DemoMatrix said:
Thank you! I uninstalled Xposed Installer and rebooted. Reinstalled Xposed Installer, rebooted, then flashed the file again. Upon that reboot it did the, "Upgraded file xx of xx" and now it's installed!
I can't thank you enough!
Click to expand...
Click to collapse
I am in same boat do you think this very would work if I have the strang5litre rom on the s4. Or would I need another ver. What rom did you have when you got this to work the stick one?
---------- Post added at 11:18 PM ---------- Previous post was at 11:15 PM ----------
trulosdoulos said:
I am in same boat do you think this very would work if I have the strang5litre rom on the s4. Or would I need another ver. What rom did you have when you got this to work the stick one?
Click to expand...
Click to collapse
Stock one* I meant
I'm using the stock rom, jfltvzw, 5.0.1
I'm on stang5litre. I'm surprised you got it to work on stock.
Details
DemoMatrix said:
I'm using the stock rom, jfltvzw, 5.0.1
Click to expand...
Click to collapse
Could you provide the steps you used to achieve this? Thanks!
Please explain how to do this.
Hello.
Can anyone explain the steps to install Xposed framework on the Samsung Galaxy S4 SCH-i545, rooted with stock ROM 5.0.1? I found and downloaded the two files noted in krusherkills123's post, but Flashfire only shows the XposedInstaller_3.0_alpha4 under "Flash firmware package" where it brings up a blank "Partitions" screen and no options.
I used Flashfire to flash the other file, xposed-v85.0-samsung-5.0.x-sdk21-test-by-dkcldark.zip, which I hated to do since I have no idea what it actually does. Since I don't know what it does, I can't confirm that flashing it was successful.
Any help would be appreciated.
Same question here, rooted Verizon S4 I545VRSGPL1, can I install xposed? This is stock rom, rooted with kingroot then cleaned to use SuperSU
People have done with OF1, not sure about PL1, but they are not far apart
Thx!

Sysless root, maybe?!need testers

Hi!
So, today, I took a look at the zips provided by Lordbannakaffalatta, in his thread. http://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994
I changed the update binaries of the zips, changed the lines "SYSTEMLESS=false" to "SYSTEMLESS=true", and "BINDSYSTEMXBIN=true" to "BINDSYSTEMXBIN=false", and it means that now It'd install itself as systemless root. I'd like to see if anyone could test it, because I don't have my device yet. Thanks for help!:fingers-crossed:
Instructions:
Put 1sysless.zip and 2sysless.zip into your sd card/internal storage.
Boot into TWRP.
Ignore the message from TWRP.
Choose the "install" button.
Locate 1sysless.zip (if on sd card go "up a level" and then "external sdcard" there you should find it).
Install it.
Reboot your phone.
Boot into TWRP again.
Locate 2sysless.zip .
Install it.
Reboot
Downloads : Zip 1:https://mega.nz/#!bVAinYjB
Zip 2 : https://mega.nz/#!rRpnyBAb
Credits goes to Lordbannakaffalatta because he provided the original zips!
Can anyone tell me what is the benefit of systemless root apart from being able to use certain apps which do not run on rooted devices?
---------- Post added at 04:26 PM ---------- Previous post was at 04:25 PM ----------
Szabi01 said:
Hi!
So, today, I took a look at the zips provided by Lordbannakaffalatta, in his thread. http://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994
I changed the update binaries of the zips, changed the lines "SYSTEMLESS=false" to "SYSTEMLESS=true", and "BINDSYSTEMXBIN=true" to "BINDSYSTEMXBIN=false", and it means that now It'd install itself as systemless root. I'd like to see if anyone could test it, because I don't have my device yet. Thanks for help!:fingers-crossed:
Instructions:
Put 1sysless.zip and 2sysless.zip into your sd card/internal storage.
Boot into TWRP.
Ignore the message from TWRP.
Choose the "install" button.
Locate 1sysless.zip (if on sd card go "up a level" and then "external sdcard" there you should find it).
Install it.
Reboot your phone.
Boot into TWRP again.
Locate 2sysless.zip .
Install it.
Reboot
Downloads : Zip 1:https://mega.nz/#!bVAinYjB
Zip 2 : https://mega.nz/#!rRpnyBAb
Credits goes to Lordbannakaffalatta because he provided the original zips!
Click to expand...
Click to collapse
Move this thread to p8lite general.
Suleiman01 said:
Can anyone tell me what is the benefit of systemless root apart from being able to use certain apps which do not run on rooted devices?
---------- Post added at 04:26 PM ---------- Previous post was at 04:25 PM ----------
Move this thread to p8lite general.
Click to expand...
Click to collapse
That's exactly! So, you can use Android Pay, and, in my case, Pokemon Go...
I'd gladly move it, if you could tell me how to do it! Sry, first thread... :/
Szabi01 said:
That's exactly! So, you can use Android Pay, and, in my case, Pokemon Go...
I'd gladly move it, if you could tell me how to do it! Sry, first thread... :/
Click to expand...
Click to collapse
Well only a moderator can do it. I didn't know that in the first place.
---------- Post added at 04:53 PM ---------- Previous post was at 04:47 PM ----------
@Heisenberg Can you move this thread to correct category? Thanks in advance.
Suleiman01 said:
Well only a moderator can do it. I didn't know that in the first place.
---------- Post added at 04:53 PM ---------- Previous post was at 04:47 PM ----------
@Heisenberg Can you move this thread to correct category? Thanks in advance.
Click to expand...
Click to collapse
Then sorry, I just posted it here because i need answers from testers :3
I tested it. It seems to work fine even though it was troubling in the beginning. Pokemon Go works fine just as all other non root apps such as banking or others. I mean I had this working before but I did it just to check this one out. Thanks Bro
PCSE said:
I tested it. It seems to work fine even though it was troubling in the beginning. Pokemon Go works fine just as all other non root apps such as banking or others. I mean I had this working before but I did it just to check this one out. Thanks Bro
Click to expand...
Click to collapse
So, it works with the newest version of PoGo?:000
Thanks for testing!!
Is there something that we should be aware of, after installing these files?
spirto82 said:
Is there something that we should be aware of, after installing these files?
Click to expand...
Click to collapse
I changed those lines only, I left the rest of the zips unmodified.
Szabi01 said:
So, it works with the newest version of PoGo?:000
Thanks for testing!!
Click to expand...
Click to collapse
Well I dont know which version it was. It was an .apk that I had lying around for like 8-10 Days or so.
PCSE said:
Well I dont know which version it was. It was an .apk that I had lying around for like 8-10 Days or so.
Click to expand...
Click to collapse
Please, can you update to the latest version and see if it works?:fingers-crossed:
I've tried it out with updated .apk and it works perfectly.
Certain bank with horse in logo was throwing "your device is rooted" error. I've checked Xposed cloak module but it failed with its job. Your solution works like a charm and now I can use banking app with root.
Has anyone tested it with the latest build (for L21 I think it's B584 and B585)?
Didn't work properly here. It installed fine, and seemed to work but opening the SuperSU app told me to update the binary which it could not do even after a few reboots. This is on stock B575 with TWRP, no other mods.
Worked flawlessly on stock B584. Had to install SuperSU from Play Store after flashing 2sysless.zip and to update the su binary
Latest version of PoGo working too
Neraeh said:
Worked flawlessly on stock B584. Had to install SuperSU from Play Store after flashing 2sysless.zip and to update the su binary
Latest version of PoGo working too
Click to expand...
Click to collapse
Did you install them after factory reset?
Sent using my Huawei P8 Lite Ale L21
spirto82 said:
Did you install them after factory reset?
Sent using my Huawei P8 Lite Ale L21
Click to expand...
Click to collapse
No, I updated from B574 and installed it right after
Neraeh said:
No, I updated from B574 and installed it right after
Click to expand...
Click to collapse
Did you install only the second file or both? Just asking cause you are referring to the second one...
spirto82 said:
Did you install only the second file or both? Just asking cause you are referring to the second one...
Click to expand...
Click to collapse
I installed both
Unfortunately, PoGo isn't working anymore after a reboot
Just a FYI, the instructions to install this are slightly wrong, i'm guessing you copied from the megathread.
The process to install is:
boot to twrp, and flash zip 1
reboot your phone and open the supersu app, then uninstall it by dragging the supersu app to the bin
reboot to twrp and flash zip 2
reboot and voila. if you do not uninstall the supersu after flashing zip 1, when you flash zip 2 supersu wont actually be installed. just a FYI.

Categories

Resources