Related
Sorry, I'm sure this will have been posted before, but I used the search function and couldn't narrow the results to what I was looking for.
I have a UK EE spec S3 LTE (Kernel - 3.0.31-1153417, Build - JZO54K-I9305XXBMF1). I have seen MSkip's excellent S3 Unified Toolkit and I am close to getting the courage to root my device, ready to put a different firmware on it to get rid of all the crap that Samsung "think" I want.
I have a couple of questions first though:
1. Can someone recommend a ROM that is the closest to stock Android (JB of course) as I love the feel of the Nexus devices. Unless 'proper' stock Android is an option.
2. Does anyone know is installing a custom ROM will affect how my 4G data reception/operation.
3. How likely am I to make a total arse of it and brick my phone?
I'm sure I'll get a few "wrong thread". "Q&A"."Theres the door dimwit" responses, but I'm big enough and ugly enough, with a heavy duty flamesuit so I can take the insults!! I'm sure someone can help :fingers-crossed:
Notlaw1976 said:
Sorry, I'm sure this will have been posted before, but I used the search function and couldn't narrow the results to what I was looking for.
I have a UK EE spec S3 LTE (Kernel - 3.0.31-1153417, Build - JZO54K-I9305XXBMF1). I have seen MSkip's excellent S3 Unified Toolkit and I am close to getting the courage to root my device, ready to put a different firmware on it to get rid of all the crap that Samsung "think" I want.
I have a couple of questions first though:
1. Can someone recommend a ROM that is the closest to stock Android (JB of course) as I love the feel of the Nexus devices. Unless 'proper' stock Android is an option.
2. Does anyone know is installing a custom ROM will affect how my 4G data reception/operation.
3. How likely am I to make a total arse of it and brick my phone?
I'm sure I'll get a few "wrong thread". "Q&A"."Theres the door dimwit" responses, but I'm big enough and ugly enough, with a heavy duty flamesuit so I can take the insults!! I'm sure someone can help :fingers-crossed:
Click to expand...
Click to collapse
Well, bricking your phone is nearly impossible, just do whatever the instructions says and you'll be fine.
And the 4G reception won't be affected, since the only thing affecting data is modems, and AOSP ROM got no modems.
And as of question number 1, there's a ROM called SuperNexus, it's exactly like a Nexus 4. But it's rarely updated and sources from CM might be a bit old. I suggest using CM or Carbon since they're being frequently updated.
I hope I answered all of your questions!
Cheers,
Sebastian!
sebbe312 said:
Well, bricking your phone is nearly impossible, just do whatever the instructions says and you'll be fine.
And the 4G reception won't be affected, since the only thing affecting data is modems, and AOSP ROM got no modems.
And as of question number 1, there's a ROM called SuperNexus, it's exactly like a Nexus 4. But it's rarely updated and sources from CM might be a bit old. I suggest using CM or Carbon since they're being frequently updated.
I hope I answered all of your questions!
Cheers,
Sebastian!
Click to expand...
Click to collapse
Thanks Sebastian! Not heard of Carbon, i'll have to Google that one. When it comes to CM, would you recommend going nightlies or a more stable version? I've heard Paranoid Android is decent too, any opinions on that one?
Sent from my GT-I9305 using Tapatalk 2
Notlaw1976 said:
Thanks Sebastian! Not heard of Carbon, i'll have to Google that one. When it comes to CM, would you recommend going nightlies or a more stable version? I've heard Paranoid Android is decent too, any opinions on that one?
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
Dunno really about Paranoid Android, I don't use it but I find it pretty OK. And if I recall it correctly, there isn't a Stable version of CM for 9305.
sebbe312 said:
Dunno really about Paranoid Android, I don't use it but I find it pretty OK. And if I recall it correctly, there isn't a Stable version of CM for 9305.
Click to expand...
Click to collapse
He's right there isn't a "stable" version but i personally can't live without using CM on my S3 i can highly recommend it, especially the ease of one touch button theme's
nags92 said:
He's right there isn't a "stable" version but i personally can't live without using CM on my S3 i can highly recommend it, especially the ease of one touch button theme's
Click to expand...
Click to collapse
Cheers, what do you use; nightlies? How often do you have to flash a new one? Are they as full of bugs as I imagine them to be?
This might sound like a stupid question, when you flash a new ROM, so you lose all your things like email settings, apps and stuff. Does the Google Play app come with a new ROM or do you have to get that as an APK from somewhere and manually install it?
Sent from my GT-I9305 using Tapatalk 2
Notlaw1976 said:
Cheers, what do you use; nightlies? How often do you have to flash a new one? Are they as full of bugs as I imagine them to be?
This might sound like a stupid question, when you flash a new ROM, so you lose all your things like email settings, apps and stuff. Does the Google Play app come with a new ROM or do you have to get that as an APK from somewhere and manually install it?
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
CM is updated every night, hence calling them "nightlies".
CM is very stable, and I often flashed a new nightly every morning.
And question about google apps; you download a different zip file, this file contains all the Google apps.
So you first flash CM then the zip file with google apps.
Sent from my GT-I9305 using xda app-developers app
Hi every one I am new in this forum I need some help to upgrade my HP Touch pad
MY friend he give me his HP Touch Pad 32 G, It has 2 boot ( 1 for WebOS ver 3.05 Hardware ver, A) second OS is Cyanogen 7.1.0 Android ver 2.3.7)
Please help me how do I upgrade to android 4.2 or 4.3.
if you have some tutorial step by step please help
Thanks
Unless your desperate to have bluetooth working id suggest sticking with the not quite so latest from cm rootziki, which isnt all bad.
Still a vast improvement and better battery life over the old
Also have a browse first of the various threads here in the tp development section. I know there are a few roms and options to update without needing resizing partitions. Will also help you get your head around it more.
Example - forum.xda-developers.com/showthread.php?t=2161364
Because If you want to go to the very latest and have Bluetooth working, from js experimental, understand there is a fair bit of jiggery Pokery to resize partitions just to allow them to work etc needed to get them working. A messy risky job.
And to be quite honest mate, there really isnt much difference in it. They will look and work the same.
I'll see if I can scrounge up the links when I get home.
There is a MASSIVE improvement in battery life coming your way.
Sent from my Nexus 4
Running gingerbread you will have to uninstall Android first, then use AcmeInstaller3 to get Jelly Bean loaded up.
I'm pretty sure the latest AcmeInstaller3 gives the correct partitions for cm10.1 (JB 4.2), including jcscullins build with working bluetooth, the resizing of partitions using tailor in webos only applies to 4.3
Peace
chris5s said:
Running gingerbread you will have to uninstall Android first, then use AcmeInstaller3 to get Jelly Bean loaded up.
I'm pretty sure the latest AcmeInstaller3 gives the correct partitions for cm10.1 (JB 4.2), including jcscullins build with working bluetooth, the resizing of partitions using tailor in webos only applies to 4.3
Peace
Click to expand...
Click to collapse
What do you guys mean by uninstall android? Return to the stock software then redo the tablet?
zone23 said:
What do you guys mean by uninstall android? Return to the stock software then redo the tablet?
Click to expand...
Click to collapse
Yes, take it back to stock, then use acme3 to load up JB. Although I think there's acme4 out now...
Peace
I see alot of Tocuhpad Dev threads and I just pulled my TP out of storage.
Its running Cyanogen Mod 4.0.4 (System settings says Cyanogen Mod Version 9-20120930 Nightly tenderloin)
Build date Sun Sept 30th 2012
I have CWM-based Recovery v5.0.2.6
moboot 0.3.5
As you can see its very outdated.
What should I be running now if I am looking for daily reliability with most features working? Thanks for your input (If there is a newer guide I can follow to update from my current version to a new one please post it, thank you)
I would suggest that you read this http://forum.xda-developers.com/showthread.php?t=2147284.
It is an excellent guide with video tutorials if necessary. Roland has also posted an additional guide of the newer more experimental Roms also in Touchpad Development forum.
Hopefully they will help you make a decision based on what you need to use your tablet for ie Bluetooth/gaming etc.
Have fun there have been lots of improvements since you last used it.
sstar said:
I would suggest that you read this http://forum.xda-developers.com/showthread.php?t=2147284.
It is an excellent guide with video tutorials if necessary. Roland has also posted an additional guide of the newer more experimental Roms also in Touchpad Development forum.
Hopefully they will help you make a decision based on what you need to use your tablet for ie Bluetooth/gaming etc.
Have fun there have been lots of improvements since you last used it.
Click to expand...
Click to collapse
Where do you even start on that thread, there is about 100 links and 15 videos posted?
gt5oh said:
Where do you even start on that thread, there is about 100 links and 15 videos posted?
Click to expand...
Click to collapse
Just read the first page, then try a couple of different ROMs at the very least you can see all the different variations available and the requirements needed to install them(Partition size.
If you then have a specific question having tried the above it will probably be a lot easier to help you.
Personally, I would go with milaq's last Jelly Bean 4.2.2 rom cm10.1
The next step is 4.3 - read need for resizing of /system, and/or /data partitions - or 4.4 (Kitkat), which is still very much experimental/developmental.
Milaq's 10.1 Jelly Bean roms are very stable and good for daily use.
Just my opinion!
Peace
Thanks, I actually went the opposite way and did the test version of 4.4 to see how it is
It appears you are already partitioned to run the newest ROMs, but if you or others want to try at least a 10.1 ROM (Android 4.2.2) without having to increase partition size, OaT's Light n Tasty (LnT) is very stable and except for the lack of bluetooth plaguing a number of the post-CM9 ROMs the ROM is very solid. He somehow lightens the ROM and the GAPPs so it runs in the pre-CM10 partitions. I am leery of going all the way back to webOS, removing Android, doctoring and changing partitions, and then starting over. At some point I am sure I will, especially if a really solid KitKat ROM is released with bluetooth.
Many people have stayed on CM9 btw, as they find CM9 the most dependable.
Here's a link to the XDA discussion on OaT LnT. Note his OP has an older version of his ROM... if you scroll towards the end he includes a link to an October 8 version he has been using recently. Make sure to also use the GAPPs he includes in the OP, since it is lightened as well. He leaves off a few things... like calendar and browser, since so many people can and do use ones downloaded from Play Store (is. I use aCalendar and Next browser).
http://forum.xda-developers.com/showthread.php?t=2332510
CM 10.1 (JB 4.2.2) doesn't require repatitioning, its the newer 10.2/4.3 and Kitkat 4.4 that require/advise a larger /system partition.
I actually went back to ICS from 10.1 thinking it had been better, but tbh the experience wasn't what I remembered and I very quickly went back to 10.1 (via Kitkat, briefly, but too buggy for me atm). Battery life, responsiveness and stability were all better, for me, with 10.1 (spceifically milaq's roms).
Having said that, its worth giving yourself a bigger /system partition - 5 or 600mb - and trying out the latest kitkat builds, there's lots of promise there!
I will definitely be going back once certain bugs and issues are ironed out...
Peace
Hi
Just received a Nook HD+ but after quickly browsing and playing for a while, I was not pleased with the stock rom, scrolls were not as smooth as I had seen on my nexus 4 for nexus 7 (maybe I am spoilt), I could notice some jitters and hope a custom ROM could fix this.
When I see in the Android development forum for this device, as usual the very many listing of the ROMs makes it difficult to identify which is the latest and the stable one (I suggest in future we should group the threads as - stable and non-stable which will help Noobs like me to jump into the act immediately).
Can somebody please advise me this bit of information as to which is the most latest custom rom that is stable, I am guessing it could the 10.1 build here [NookHD+] CM10.1 native emmc install Now part of CM Nightlies . Also to a step by step resource starting from rooting to the final flashing of the custom rom.
Also, is it possible to use 'Cyonogenmod installer' instead directly from their website!?
thanks
S
reply cm
Believe me I tried everything on nook.my initial thoughts were to run on SD card.but you have no official stable ROM for SD card .and the one available from bookbane was quite laggy .I tried both cm 11 and cm 10.2.then I installed on emmc again cm 11,cm 10.1 ,xperia ROM.but trust me the best experience I had so far was from cm10.2 on emmc .works beutiffully without any lag.
Just received a Nook HD+ but after quickly browsing and playing for a while, I was not pleased with the stock rom, scrolls were not as smooth as I had seen on my nexus 4 for nexus 7 (maybe I am spoilt), I could notice some jitters and hope a custom ROM could fix this.
When I see in the Android development forum for this device, as usual the very many listing of the ROMs makes it difficult to identify which is the latest and the stable one (I suggest in future we should group the threads as - stable and non-stable which will help Noobs like me to jump into the act immediately).
Can somebody please advise me this bit of information as to which is the most latest custom rom that is stable, I am guessing it could the 10.1 build here [NookHD+] CM10.1 native emmc install Now part of CM Nightlies . Also to a step by step resource starting from rooting to the final flashing of the custom rom.
Also, is it possible to use 'Cyonogenmod installer' instead directly from their website!?
thanks
S[/QUOTE]
dajmaa said:
Believe me I tried everything on nook.my initial thoughts were to run on SD card.but you have no official stable ROM for SD card .and the one available from bookbane was quite laggy .I tried both cm 11 and cm 10.2.then I installed on emmc again cm 11,cm 10.1 ,xperia ROM.but trust me the best experience I had so far was from cm10.2 on emmc .works beutiffully without any lag.
Just received a Nook HD+ but after quickly browsing and playing for a while, I was not pleased with the stock rom, scrolls were not as smooth as I had seen on my nexus 4 for nexus 7 (maybe I am spoilt), I could notice some jitters and hope a custom ROM could fix this.
When I see in the Android development forum for this device, as usual the very many listing of the ROMs makes it difficult to identify which is the latest and the stable one (I suggest in future we should group the threads as - stable and non-stable which will help Noobs like me to jump into the act immediately).
Can somebody please advise me this bit of information as to which is the most latest custom rom that is stable, I am guessing it could the 10.1 build here [NookHD+] CM10.1 native emmc install Now part of CM Nightlies . Also to a step by step resource starting from rooting to the final flashing of the custom rom.
Also, is it possible to use 'Cyonogenmod installer' instead directly from their website!?
thanks
S
Click to expand...
Click to collapse
[/QUOTE]
Could you please point me to the source please with instructions to the best experience ROM 10.2!? will this autoupdate to any other new updates from Cyanogenmod?
thanks
S
Could you please point me to the source please with instructions to the best experience ROM 10.2!? will this autoupdate to any other new updates from Cyanogenmod?
thanks
S[/QUOTE]Go to the dummies guide for installing CM10.1/CM10.2 linked in my signature.
Sent from my SCH-i705 using Tapatalk
CM11
Best choice for HD+ is CM11 EMMC from verygreen.
It's officially supported by Cyanogemod and gets nightly updates.
The ROM is smooth and efficient.
There may be tiny little bugs for the ROM, but they won't stop you from using your device as a daily driver.
3/27 is very stable btw.
CM 10.2.1. vs. CM 11
After reading some of the posts here, I decided to "downgrade" from CM 11 0327 to the last stable CM 10, 10.2.1. (Per dajmaa's suggestion.)
I'd never tried CM 10 before. When I got my HD+ a few weeks ago, I went from the Nook stock ROM direct to a CM11 SD install (0308) and then ended up at CD 11 0327 on emmc the other day.
While CM 11 was usable for me (except for one annoying problem, where I couldn't download mp3's), I see that CM 10 is much more finished. For example, it has zRam implemented. (But maybe KitKat doesn't need that, with it's ostensibly better memory management?) Trebuchet launcher works like it's supposed to in CM 10.2.1, although I liked the ability to enlarge the icons in CM 11. And the font in the status bar seemed bigger to my old eyes in CM 11 than CM 10.
Lagwise, they both seem the same. No lag, although I noticed that CM 10 gets "stuck" every now and then when I switch back and forth quickly between apps. And it keeps wanting to put "Extended Desktop" in the Power menu.
I haven't had it running long enough with my aviation moving maps to see if I get any random reboots like I did with CM 11.
As JimJ2Mz said, 0327 runs well. (Except that I couldn't download podcasts.)
But I'll plan to stay put now until there's some major announcement about CM 11, like a RC or something.
JimJ2Mz said:
Best choice for HD+ is CM11 EMMC from verygreen.
It's officially supported by Cyanogemod and gets nightly updates.
The ROM is smooth and efficient.
There may be tiny little bugs for the ROM, but they won't stop you from using your device as a daily driver.
3/27 is very stable btw.
Click to expand...
Click to collapse
Thanks Jim, I installed 10.2.x after trying out 10.1.3 for some time. I notice, GAPPS crashing randomly once in a while although not that too bad. Sometimes hangs for a while before it gets normal. So I guess there are still some bugs around. So was wondering 10.1.3 must be the one for me unless something stable comes up.
Now I see your post, and wondering why not I try it if there is going to be future updates. Do you feel it is smoother than the 10.1.x and 10.2.x as we all know KitKat is designed to run better on older hardware? If so I will proceed with CM11 and live minor bugs if that is not going to stand in the way of my daily usage like you mentioned.
sany said:
Thanks Jim, I installed 10.2.x after trying out 10.1.3 for some time. I notice, GAPPS crashing randomly once in a while although not that too bad. Sometimes hangs for a while before it gets normal. So I guess there are still some bugs around. So was wondering 10.1.3 must be the one for me unless something stable comes up.
Now I see your post, and wondering why not I try it if there is going to be future updates. Do you feel it is smoother than the 10.1.x and 10.2.x as we all know KitKat is designed to run better on older hardware? If so I will proceed with CM11 and live minor bugs if that is not going to stand in the way of my daily usage like you mentioned.
Click to expand...
Click to collapse
When you updated to CM10.2, did you also update to 20120813 gapps? That could be the reason for your gapps problems if you didn't.
And an HD+ is not 'older hardware'.
I recommend CM10.1.3 as the most stable.
Sent from my BN NookHD+ using XDA Premium HD app
sany said:
Thanks Jim, I installed 10.2.x after trying out 10.1.3 for some time. I notice, GAPPS crashing randomly once in a while although not that too bad. Sometimes hangs for a while before it gets normal. So I guess there are still some bugs around. So was wondering 10.1.3 must be the one for me unless something stable comes up.
Now I see your post, and wondering why not I try it if there is going to be future updates. Do you feel it is smoother than the 10.1.x and 10.2.x as we all know KitKat is designed to run better on older hardware? If so I will proceed with CM11 and live minor bugs if that is not going to stand in the way of my daily usage like you mentioned.
Click to expand...
Click to collapse
In my own experience, yes, CM11 feels much more fluid than the older versions.
4.4 RAM usage is optimized for older hardware, which actually benefits ALL devices, but that doesn't mean that the Nook HD/HD+ is old. It's modern and is still very powerful, just as leapinlar said. Well, not powerful, but not weak. Haha.
And as leapinlar also recommended, CM10.1.3 is indeed stable. Anyway. It's up to you. I've had my experiences with the ROMs and they can differ from others, so it's all up to you whether you want to try CM11 or stick to any other ROM.
JimJ2Mz said:
In my own experience, yes, CM11 feels much more fluid than the older versions.
4.4 RAM usage is optimized for older hardware, which actually benefits ALL devices, but that doesn't mean that the Nook HD/HD+ is old. It's modern and is still very powerful, just as leapinlar said. Well, not powerful, but not weak. Haha.
And as leapinlar also recommended, CM10.1.3 is indeed stable. Anyway. It's up to you. I've had my experiences with the ROMs and they can differ from others, so it's all up to you whether you want to try CM11 or stick to any other ROM.
Click to expand...
Click to collapse
I tried CM11 but it was throwing lots of google app erros on load, I was actually using the same GAPPS file that was on the 10.2.1, is there a used diferent GAPP file for CM11? maybe that caused the error. And also I struggled to go back to the CWM recovery for CM10.1 and 10.2 as it was just stuck at the recovery used for CM11 even after flashing the ver.3 recovery zip several times.
I have literally tried every single ROM out there and here are my recommendations:
1. Succulent's CM 11 (http://goo.im/devs/succulent/ovation/cyanogenmod/internal)
2. Official CM 10.2 Stable (I have been using it with drmarble's Kernel, which you can get here: https://app.box.com/s/ry03xsmhlxq2jomnwlaj)
Both ROMs are bug-free and run flawlessly. I get around 6 hours of screen-on time on both (which is an amazing battery life).
OH GEEZ
sany said:
I tried CM11 but it was throwing lots of google app erros on load, I was actually using the same GAPPS file that was on the 10.2.1, is there a used diferent GAPP file for CM11? maybe that caused the error. And also I struggled to go back to the CWM recovery for CM10.1 and 10.2 as it was just stuck at the recovery used for CM11 even after flashing the ver.3 recovery zip several times.
Click to expand...
Click to collapse
DUDE YOU HAVE TO USE GAPPS DEDICATED FOR CM11 (4.4)!
That's a given. You're having errors due to the fact that you're using 4.2 gapps on 4.4!
Follow this guide and FIX EVERYTHING. I followed it myself it everything works perfectly.
Please do ask if you need help on anything. I may be a noob, but I do know some stuff.
http://forum.xda-developers.com/showthread.php?t=2602796
Thanks Jim
JimJ2Mz said:
DUDE YOU HAVE TO USE GAPPS DEDICATED FOR CM11 (4.4)!
That's a given. You're having errors due to the fact that you're using 4.2 gapps on 4.4!
Follow this guide and FIX EVERYTHING. I followed it myself it everything works perfectly.
Please do ask if you need help on anything. I may be a noob, but I do know some stuff.
http://forum.xda-developers.com/showthread.php?t=2602796
Click to expand...
Click to collapse
Thanks Jim, I will do this. Why do you think I was unable to go back to CWN recovery for 10.1/10.2 - everytime after flashing the old recovery and go into the recovery mode, I still see the ver.6 (of CM11) in action.
S
I've got my Verizon SCH-1800 that I wanted to start using again.
Looking at it now, I'm on CM 9-20120511-NIGHTLY-p1c, which is 4.0.4
The kernel is 2.6.35.7-g8f42093, [email protected]#1
I've been reading around about new ROMs, etc but if I'm not mistaken, back when I rooted this processes were very particular about how to root this tablet and all I'm seeing is a lot of older threads. I guess I'm hoping someone can answer two simple questions for me:
- Is there a method of rooting that is the definitive way for this tablet?
- After so much time, is there a version of Android that is most stable for this aging tablet? ICS, JB?
Thank you if anyone can help, I appreciate it.
If you have CM9, then you have root access. As to stable or good rom's, you just have to read up on the different ones to see what sounds good to you. Then flash it. Don't like it? Try another.
Sent from my SCH-I200PP using xda app-developers app
Ok, so from now on it's just a question of installing zips via recovery? I never have to go back to stock again like you once used to?
Something more must be needed because I can't even flash this CM ROM without problems: http://forum.xda-developers.com/showthread.php?t=2032726
Recovery says it's a bad ZIP. But I got it from that link.