Database Develop

[Q] Help Re-Rooting after OTA Update

hey guys i tried searching for answers. but had no success. i have a note 3 that was rooted with kingo. AT&T automatically installed an OTA update and of course it un rooted my phone. i still get the custom boot screen as well as still have safestrap on my device. my question is how do i reroot my device? ive tried kingo again and it fails after rebootong the phone 5 or 6 times. im still running 4.3 build is JSS15J.N900AUCUBNB4
i know a little on some things but im not as technical as most of you. but any help would be greatly appreciated.

Survivor058 said:
hey guys i tried searching for answers. but had no success. i have a note 3 that was rooted with kingo. AT&T automatically installed an OTA update and of course it un rooted my phone. i still get the custom boot screen as well as still have safestrap on my device. my question is how do i reroot my device? ive tried kingo again and it fails after rebootong the phone 5 or 6 times. im still running 4.3 build is JSS15J.N900AUCUBNB4
i know a little on some things but im not as technical as most of you. but any help would be greatly appreciated.
Click to expand...
Click to collapse
What version of Kingo did you try? Use 1.1.5 or 1.1.8. People have had success with that. 1.1.8 worked for me. Just Google around and you will find the download on the net somewhere.

theorioles33 said:
What version of Kingo did you try? Use 1.1.5 or 1.1.8. People have had success with that. 1.1.8 worked for me. Just Google around and you will find the download on the net somewhere.
Click to expand...
Click to collapse
it was 1.2.0 ill try an older version

In case you have trouble finding a copy
https://mega.co.nz/#!AxdHUCCQ!86DzctSWlXK4VfbInPYBgC_4QYAM2wUR8cewrflAyk0

theorioles33 said:
In case you have trouble finding a copy
unfortunately that did not work. the root failed. that was version 1.1.5, last night i tried 1.1.8 failed and tried the latest 1.2.0 with no success. would you recommend something else? i did try theese root methods with the sd card inserted im not sure if that is a no no or not
Click to expand...
Click to collapse

I'm at a loss. I had my SD card in by the way. Maybe someone else will have some ideas.
Sent from my SAMSUNG-SM-N900A using Tapatalk

theorioles33 said:
I'm at a loss. I had my SD card in by the way. Maybe someone else will have some ideas.
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
that sucks. factory reset? ill most likely still have the issue but maybe not. isnt there a way to completely wipe the phone from the boot screen? id rather not if i dont have to.

You can try a factory reset and then root. If not there is a thread in the general section to go back to stock. Works great. I used it.
Sent from my SAMSUNG-SM-N900A using Tapatalk

theorioles33 said:
You can try a factory reset and then root. If not there is a thread in the general section to go back to stock. Works great. I used it.
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
but arent i technically back to stock? since i dont have root access? this is very confusing to me. if my carrier didnt push that update i wouldnt be in this boat

You are but we can't figure out why you can't root when others in your situation can. There is Kingo thread you can check out. Maybe you can find some answers there.
Sent from my SAMSUNG-SM-N900A using Tapatalk

anyone have any suggestions?? 139 views in less than an hour someone has got to know something lol

Survivor058 said:
anyone have any suggestions?? 139 views in less than an hour someone has got to know something lol
Click to expand...
Click to collapse
Factory Reset after the update to NB4, also go to recovery wipe cache, then try the 1.18, during the rooting process, look your phone screen, you need to click accept something twice,

I don't know how it all works terribly well but you said you still have Safestrap? Can you still install ROMs and can they have root?
Also, for when you eventually do get it working again. I recommend freezing the ATT updater. It can be awful when it eventually FORCES an update.
I got a free app called App Quarantine and froze "AT&T Software Update".

coolmingli said:
Factory Reset after the update to NB4, also go to recovery wipe cache, then try the 1.18, during the rooting process, look your phone screen, you need to click accept something twice,
Click to expand...
Click to collapse
ok yea this is all french to me. you want me to factory reset? im not sure what the NB4 is?. and i thing i know how to wipe the cache.

Gary3 said:
I don't know how it all works terribly well but you said you still have Safestrap? Can you still install ROMs and can they have root?
Also, for when you eventually do get it working again. I recommend freezing the ATT updater. It can be awful when it eventually FORCES an update.
I got a free app called App Quarantine and froze "AT&T Software Update".
Click to expand...
Click to collapse
safestrap is on my phone but it cant be removed and just says that the phone isnt properly rooted. so no i cannot install roms and i will make sure that once i resolve this ill freezr that app
sorry for the delay guys im back at this again. i do very much appreciate all who are trying to offer assistance

ok guys so ive wiped the cache. and have done the factory reset. kingo 1.1.5 and 1.1.8 both have failed...... what is going on here maybe someone can skype with me the steps to completely flash my phone to the day i got it i see the thread but im scared ****less to try it lol

You will just have to follow the restore to MJ5 thread. The instructions are simple and very easy to follow. Go slow and follow them to the T.
What they do not mention however is do not use a 3.0 USB port. Only 2.0 will work.
Just follow that.
It is literally impossible to brick this phone to the point of it being unrecoverable. There is a tutorial to restore from hard bricks without J-Tag.
Sent from my SM-N9005A using XDA Premium 4 mobile app

graydiggy said:
You will just have to follow the restore to MJ5 thread. The instructions are simple and very easy to follow. Go slow and follow them to the T.
What they do not mention however is do not use a 3.0 USB port. Only 2.0 will work.
Just follow that.
It is literally impossible to brick this phone to the point of it being unrecoverable. There is a tutorial to restore from hard bricks without J-Tag.
Sent from my SM-N9005A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hey graydiggy, I did the restore back to MJ5, but can't seem to get the last step for rooting to work. I tried every way with putting the rdlv on internal...unzipped and zipped. I even tried doing the same on the external sd as well. When I reboot supersu doesn't do anything. Any suggestion on how to get the last step to work?
Thanks in advance for your help.

chrispyutec said:
Hey graydiggy, I did the restore back to MJ5, but can't seem to get the last step for rooting to work. I tried every way with putting the rdlv on internal...unzipped and zipped. I even tried doing the same on the external sd as well. When I reboot supersu doesn't do anything. Any suggestion on how to get the last step to work?
Thanks in advance for your help.
Click to expand...
Click to collapse
It has to be unzipped and on the internal. You have to reboot a few times for it to activate. After the first reboot, let the phone sit for a few minutes and then reboot again. You should be good to go after that.
Sent from my SM-N9005A using XDA Premium 4 mobile app

graydiggy said:
It has to be unzipped and on the internal. You have to reboot a few times for it to activate. After the first reboot, let the phone sit for a few minutes and then reboot again. You should be good to go after that.
Sent from my SM-N9005A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Wow that did the trick!!! Thanks for holding my hand lol. I hit your thanks and I appreciate your help.

How to fix return to official stock 4.3 att

Problems
what ive done to phone since ive had it.
Ive Kingo rooted
I deleted att bloatware
backed up first to TB
Have TB for 2 years so im not new to it.
I made back up on TB
did a factory data reset
tried to do the OTA update for the first 38mb file that gets you ready for 4.4
it never makes it past 25% install then fails
on a sidenote my phone says my phone stop a preventive download for safety reasons it shows a shield on notification tray hope that sounds familiar
Went to kingo to re root to install TB again to restore files all lost blank saves
So my phone works but its not updatable and I can reinstall all my apps i just cant update
Im on MJ5 ATT 4.3
Model number
SAMSUNG-SM-N900A
Android version
4.3
Baseband version
N900AUCUBMJ5
Kernel version
3.4.0-1625098
[email protected] #1
Thu Oct 17 18:19:07 KST 2013
Build number
JSS15J.N900AUCUBMJ5

Go check the official KK NC2 discussion thread in general. There is a possible fix.
Sent from my SM-N9005 using XDA Premium 4 mobile app

graydiggy said:
Go check the official KK NC2 discussion thread in general. There is a possible fix.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Is it a modded rom like original. Theres over 300+ pages to go over if I new what key word to search that thread to find faster would be great.
Im partically looking for stock firmware 4.3 mj5 if its out there. Maybe Odin it then i could hopefully update then.T
Thanks

Well... That is where the problem is. We have a "revert to MJ5" thread, but it is modified stock to allow root. The OTA will fail with that. There are multiple fixes available for many circumstances... There really is now key word to use... Just read over the pages that start at around noon yesterday. That will greatly reduce what you are digging through.
Sent from my SM-N9005 using XDA Premium 4 mobile app

r21174 said:
Problems
what ive done to phone since ive had it.
Ive Kingo rooted
I deleted att bloatware
backed up first to TB
Have TB for 2 years so im not new to it.
I made back up on TB
did a factory data reset
tried to do the OTA update for the first 38mb file that gets you ready for 4.4
it never makes it past 25% install then fails
on a sidenote my phone says my phone stop a preventive download for safety reasons it shows a shield on notification tray hope that sounds familiar
Went to kingo to re root to install TB again to restore files all lost blank saves
So my phone works but its not updatable and I can reinstall all my apps i just cant update
Im on MJ5 ATT 4.3
Model number
SAMSUNG-SM-N900A
Android version
4.3
Baseband version
N900AUCUBMJ5
Kernel version
3.4.0-1625098
[email protected] #1
Thu Oct 17 18:19:07 KST 2013
Build number
JSS15J.N900AUCUBMJ5
Click to expand...
Click to collapse
If you installed the leaked kk and reverted back to 4.3 like many of us. You succeeded corrupting system files. Revert back to mj5. Without touching anything check for an update. Go the the original thread and look to a tutorial that asrael can't remember what the second part of his user name was. But replace all the Knox apps and a system file he talks about on his post. Then you should be able to get kk installed. It worked for me.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

http://forum.xda-developers.com/showthread.php?p=51447667
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
---------- Post added at 12:15 PM ---------- Previous post was at 12:14 PM ----------
That's the post I was talking about earier.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

No its a factory update to 4.3 no Mods on rom just rooted

Unrooting seems to leave some junk behind that prevents the update.
Search for megalomaniac's threads. He has one with a Safestrap backup of a stock MJ5. Install Safestrap (you'll have to be rooted), install the MJ5 backup to the stock slot (it's 5 files - download them and put them into a folder on your SD card named MJ5 or something that makes sense to you). When you reboot, you'll be booting to a new installation of MJ5. Set it up, google account, at least, and you'll almost immediately get the NB4 update. (If Safestrap is still installed, clear data and cache and uninstall it - I can't recall if it is.) After that it should accept the 4.4.2 update.
If not, you can bring it to a Best Buy Samsung kiosk. The phone will look just like a normal untouched NB4 phone. They can flash NB4 to it, and theirs will accept the 4.4.2 update. They know there have been problems (even with totally stock phones), so there shouldn't be any problem - as long as you play dumb. "Why can't I get Kit Kat on my phone?"

I'll try best buy till easy solutions come available. My biggest concern is gps sucking and it's not worth to have a molded rom
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

Most if not all custom ROMs have the GPS fixed.
Sent from my SM-N9005 using XDA Premium 4 mobile app

Agree, KnoxRaid GPS is excellent.

Getting rid of superuser icon on the official 4.4.2 kitkat

As the title says I can't get rid of the super user icon on the official kitkat. Does anyone know a fix for this? I have super user but no root.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

You could try going to best buy and have them flash it... Other than that as of now no. There isn't a way
Sent from my XT907 using xda app-developers app

You can only disable the app by going to System-App- and click disable. To 'get rid' of the app will require root but unfortunately there is no such thing as of now
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

did you try uninstalling it from inside the playstore app?

frome901 said:
did you try uninstalling it from inside the playstore app?
Click to expand...
Click to collapse
I'm experiencing the same issue, and no - since the phone thinks it's a system app, it will not let you completely uninstall it. It will however give you the option to uninstall any updates.
mrkhigh said:
You could try going to best buy and have them flash it... Other than that as of now no. There isn't a way
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
Has this been done? I mean re-flash a stock NC2 over NC2 with the upgraded bootloader? If so, this will definitely get rid of that pesky SU app! Also, if it can be done, what do I say to the Samsung tech nerds about why i want it flashed?
Just asking.

Sounds like you're stuck with even more useless bloat then most.

Go to your nearest Samsung kiosk at your best buy and they will redo the update and that will get rid of the superuser files and all files associated with root. I just went and I'm root anything free. How I know is I used isis and didn't get the your phone is rooted message. Good Luck. O PS you won't loose anything meaning their update don't wipe your phone back to factory. But just in case do a BACKUP.
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app

Thanks guys for all you replies. Will try going to best buy soon to see if they can do it for me.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

Going bestbuy in your current state won't work. They are only able to do a update or emergency recovery to NC2, so you will still be stuck with non-working SuperSU still under /system/app even after reflashing. Unfortunately they don't have full factory reset image for 4.4.2 NC2 yet as of 5/17/2014.
What I did to remove that is to flash leaked Kitkat MLG with NC2 bootloader (look for the thread posted by Carl) using Odin, and this will wipe everything out. Then go to Bestbuy Samsung and update to NC2. This is the only way to remove SuperSU or any junk left behind.
As a precaution I did factory reset after I got mine updated to NC2 and after installing some stuff my PlayStore dissappeared so I had to do a factory reset another time. Now I think everything is pure stock.
And you don't have to make up any excuses about why you want it reflashed. Just tell them you had it rooted and now because att MFs locked down everything so bad you couldn't even get rid of it without flashing with leaked Kitkat. Samsung guys are there to help you.
I'm never going to buy another At&t crap again.

hp79 said:
Going bestbuy in your current state won't work. They are only able to do a update or emergency recovery to NC2, so you will still be stuck with non-working SuperSU still under /system/app even after reflashing. Unfortunately they don't have full factory reset image for 4.4.2 NC2 yet as of 5/17/2014.
What I did to remove that is to flash leaked Kitkat MLG with NC2 bootloader (look for the thread posted by Carl) using Odin, and this will wipe everything out. Then go to Bestbuy Samsung and update to NC2. This is the only way to remove SuperSU or any junk left behind.
As a precaution I did factory reset after I got mine updated to NC2 and after installing some stuff my PlayStore dissappeared so I had to do a factory reset another time. Now I think everything is pure stock.
And you don't have to make up any excuses about why you want it reflashed. Just tell them you had it rooted and now because att MFs locked down everything so bad you couldn't even get rid of it without flashing with leaked Kitkat. Samsung guys are there to help you.
I'm never going to buy another At&t crap again.
Click to expand...
Click to collapse
I'm going to have to disagree with you since I was in the same boat as the OP. I went to Best Buy Samsung and they did the update from Samsung site and it wiped out all traces of root files and supersu. They first had to download the update from Samsung site and then they connected my note 3 on nc2 with superus still there. Once they finished I checked my disabled apps and superus was no longer listed. I did a complete factory restore to verify it worked and superus was nowhere to be found. Not sure what is different from AT&T update and Samsung but Samsung version completely wipes out root.
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app

[Q] Root for VS980 on KitKat 4.4.2?

Is there a method to root the Verizon LG G2 (VS980) on the stock OTA Kit Kat 4.4.2 build yet?
I bought the phone used, already had the OTA on it...now I just need root.
Not interested in Rom'ing, just need tethering without the $30/month charge for the few times I use it and need root to do it.
Thanks!

mcdonsco said:
Is there a method to root the Verizon LG G2 (VS980) on the stock OTA Kit Kat 4.4.2 build yet?
I bought the phone used, already had the OTA on it...now I just need root.
Not interested in Rom'ing, just need tethering without the $30/month charge for the few times I use it and need root to do it.
Thanks!
Click to expand...
Click to collapse
ioroot25 should still work...

I'm considering a G2 also and have been wondering the same. From what I gathered you would have to go back to 4.2.2 first, gain root, and then flash back to 4.4.2. Someone correct me if I'm wrong please.

Juggernaut79 said:
I'm considering a G2 also and have been wondering the same. From what I gathered you would have to go back to 4.2.2 first, gain root, and then flash back to 4.4.2. Someone correct me if I'm wrong please.
Click to expand...
Click to collapse
You don't have to. Ioroot25 will root the official kk. That's what I used and it worked without an issue. Just make sure all the proper drivers are installed on your computer...
Sent from my VS980 4G using XDA Premium 4 mobile app

mjones73 said:
ioroot25 should still work...
Click to expand...
Click to collapse
GRACIAS!...Didn't know that.

mjones73 said:
ioroot25 should still work...
Click to expand...
Click to collapse
As far as that goes, how is installing the LG G2 unified drivers supposed to go? I found the download link for them in the main 200 page thread for this. Extracted the zip, but none of the .exe files do anything when run. Is that normal or is something wrong? For example I tried running InstallUSB64.exe but absolutely nothing happens.
Another more recent post on like page 185 of the thread had another download link, but that just leads to a file called "LG" with no extension and it doesn't appear to be a .zip
---------- Post added at 10:37 AM ---------- Previous post was at 09:58 AM ----------
ivanalbright said:
As far as that goes, how is installing the LG G2 unified drivers supposed to go? I found the download link for them in the main 200 page thread for this. Extracted the zip, but none of the .exe files do anything when run. Is that normal or is something wrong? For example I tried running InstallUSB64.exe but absolutely nothing happens.
Another more recent post on like page 185 of the thread had another download link, but that just leads to a file called "LG" with no extension and it doesn't appear to be a .zip
Click to expand...
Click to collapse
Nevermind, got it. The link to the driver is at the very bottom of this post: http://forum.xda-developers.com/showpost.php?p=53128251&postcount=1847
You have to add the extension .exe
Root successful with the instructions listed there. Used ioroot25. Running android 4.4.2

Is root all I need to flash Roms? Do I need to unlock the boot loader as well?
Sent from my VS980 4G using XDA Premium 4 mobile app

coliny59 said:
Is root all I need to flash Roms? Do I need to unlock the boot loader as well?
Sent from my VS980 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No you will need to root and then install custom recovery. Depending on what you are on. If you are on kitkat you can use autorec, and anything earlier you can use flashify.

simple_fear85 said:
No you will need to root and then install custom recovery. Depending on what you are on. If you are on kitkat you can use autorec, and anything earlier you can use flashify.
Click to expand...
Click to collapse
I understand this phone has an e fuse. Will it be tripped by installing a custom recovery?
Sent from my VS980 4G using XDA Premium 4 mobile app

coliny59 said:
I understand this phone has an e fuse. Will it be tripped by installing a custom recovery?
Sent from my VS980 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I am not sure about the question but I know when you root this phone there is a trip where it will show in the lg menu that it is rooted. In order to get rid of that you will have to return to stock. Tell you though I have had this phone for a few months now and I am glad i finally decided to root and put custom recovery on. Its my phone and set up the way I want with root and all.

simple_fear85 said:
I am not sure about the question but I know when you root this phone there is a trip where it will show in the lg menu that it is rooted. In order to get rid of that you will have to return to stock. Tell you though I have had this phone for a few months now and I am glad i finally decided to root and put custom recovery on. Its my phone and set up the way I want with root and all.
Click to expand...
Click to collapse
Thanks for the feedback!
Sent from my VS980 4G using XDA Premium 4 mobile app

coliny59 said:
Thanks for the feedback!
Sent from my VS980 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
no problem. If you want a nice working asop rom check on Vanir 4.4.3

I'm having a hell of a time trying to get this thing to root. I followed all of the instructions for installing the LG device drivers and when I go to run the IOroot25 it flashes really quickly and then goes away. USB debugging is enabled and I have tried it in ethernet mode and charging mode. Both produce the same result. Do I need to remove any other drives I might have on my computer in order to get it to work? Any other ideas?

yoderz said:
I'm having a hell of a time trying to get this thing to root. I followed all of the instructions for installing the LG device drivers and when I go to run the IOroot25 it flashes really quickly and then goes away. USB debugging is enabled and I have tried it in ethernet mode and charging mode. Both produce the same result. Do I need to remove any other drives I might have on my computer in order to get it to work? Any other ideas?
Click to expand...
Click to collapse
You need to be in Ethernet mode.
Once it boots into recovery, did you scroll down and select "install from adb"?

tech_head said:
You need to be in Ethernet mode.
Once it boots into recovery, did you scroll down and select "install from adb"?
Click to expand...
Click to collapse
Yeah, I had everything setup correctly and it didn't work. Tried the same exact thing on another computer and it worked flawlessly. Thanks though!

yoderz said:
Yeah, I had everything setup correctly and it didn't work. Tried the same exact thing on another computer and it worked flawlessly. Thanks though!
Click to expand...
Click to collapse
Im having problems rooting it as well. I installed the latest drivers 1.14 I believe, and when trying to root it using ioroot25 it says downgrade to a previous version.
I do have it on Ethernet mode, and it reboots it into recovery, but that's it. I select apply update from adb but again, on ioroot it does nothing after the suggestion to downgrade.
any suggestions?

Make sure your phone is setup. Debugging mode is set. Unknown sources is set. Phone is on airplane mode. Plug into computer and start ioroot25 and follow steps
Sent from my LG-VS980 using XDA Free mobile app

Guys just use towelroot to root. You install an app and push a button.
Sent from my VS980 4G using XDA Free mobile app

squidder said:
Guys just use towelroot to root. You install an app and push a button.
Sent from my VS980 4G using XDA Free mobile app
Click to expand...
Click to collapse
I second this. I used it just yesterday to root a stock G2 on the Kit Kat update.

I wouldnt trust in my opinion. Ioroot way easier
Sent from my LG-VS980 using Tapatalk

NEXUS 6 OTA Question

Hello XDA, I recently rooted / unlocked my N6. I used WugFresh NRT to do so. However, I did not like the process of rooting so I (using NRT) flashed stock + unrooted and then factory reset followed by an OEM lock. Reading about lollipops new way of OTA, can I perform OTAs? Or is it too late?
Sent from my Nexus 6 using XDA Free mobile app

Hi,
As long as you are now stock, no system partition changes and Stock recovery, you should get and be able to install an OTA.
But, I don't own the device, so I'll have your thread moved to your device section in case there's something I don't know about the N6 in particular.
Good luck!

Thanks! I'm a newb to this whole technology stuff. My first nexus device as well. I soft bricked it too while attempting to remove a ROM.
Sent from my Nexus 6 using XDA Free mobile app

TheSkillfulTroll said:
Thanks! I'm a newb to this whole technology stuff. My first nexus device as well. I soft bricked it too while attempting to remove a ROM.
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
Not sure if this is of any value to you but considering the device apps are similar it may be used.
http://forum.xda-developers.com/google-nexus-5/general/stock-checker-zip-prepare-ota-t2927865

Oh to be honest I'm done with rooting for now. Ill wait till 5.0.2 comes out if I OTA good then great but if it fails (hopefully ill still be able to access phone if it does) I'll then flash and root. Hopefully its not the latter
Sent from my Nexus 6 using XDA Free mobile app

TheSkillfulTroll said:
Oh to be honest I'm done with rooting for now. Ill wait till 5.0.2 comes out if I OTA good then great but if it fails (hopefully ill still be able to access phone if it does) I'll then flash and root. Hopefully its not the latter
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
If your completely stock and unrooted their is nothing to worry about. You will indeed get updates.

Even with lollipops new way of checking?
They check blocks
Sent from my Nexus 6 using XDA Free mobile app

if you are rooted and on TWRP. Just download the 5.0.1 image. Extract it till you see the system.img and boot.img. Also download twrp and run
fastboot flash system system.img
fastboot flash boot boot.img
I then reboot and then run
fastboot flash recovery whateverthefilefortwrpis.img
after that restart to system and twrp will ask if you want to install supersu. I let it install and now i'm on 5.0.1. Everything is intact and no wipe is required.

I don't think you quite understand what I am asking... I had 5.0.1 , I rooted and unlocked using NRT. I installed a ROM, didn't like it and attempted to remove. At the attempt to remove it, I screwed up and the setup wizard wouldn't start, so I FORCE FLASHED USING NRT Stock and unrooted. This allowed me to start the phone and use it, I factory reset then relocked the OEM. I do not want to root nor unlock, I am asking if that, after these events, and lollipops new way of OTA, will I be able to update via OTAs?
Sent from my Nexus 6 using XDA Free mobile app

What is the new way lollipop handles OTA's?
Sent from my Nexus 6 using Tapatalk 4

Back then, it used to check file by file which was easily avoidable. Now, it checks a whole block of a partition, if it sees something as small a byte changed, it aborts. You can read more NY just googling Nexus 6 OTA root.
Sent from my Nexus 6 using XDA Free mobile app

TheSkillfulTroll said:
Back then, it used to check file by file which was easily avoidable. Now, it checks a whole block of a partition, if it sees something as small a byte changed, it aborts. You can read more NY just googling Nexus 6 OTA root.
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
It's not hard to understand, actually quite simple. If you have flashed the stock image then there is nothing to worry about and there is no need for assumptions. Yes, you will receive OTAs. No need for the "what if" and "how about," if you aren't willing to accept an answer, don't ask a question.

If you're 100% stock then you will get ota.

Oh okay, thanks for the help! Once 5.0.2 rolls out, if it does not work, I'll just have to do it within NRT
Sent from my Nexus 6 using XDA Free mobile app