Database Develop

Who can help me?

Hi,
Kies offers me a new Version and I confirmed.
The Update goes wrong and now the can`t start.
I can`t send back to Samsung, i bought he Tab in Hongkong :-(
Samsung Germany says "sorry no!
Can anybody reset my Tab, i will pay for help.
Regads Klaus

Can you get in download mode or recovery? Do you see anything on the screen when you try to turn on the tablet?

Hi
Following Message are displayed:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
The Recovery Mode are not work :-(
Regards Klaus

ffbkschulz said:
Hi
Following Message are displayed:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
The Recovery Mode are not work :-(
Regards Klaus
Click to expand...
Click to collapse
This is displayed on tablet?
What happens when you hold volume up while turning tablet on? Do you get two icons? The right one is Download mode, if you can enter it then it should be possible to flash stock firmware with Odin. Check the guide in development forum.

Hi
Nothing
Regards Klaus

Did you try volume up and start button at the same time when starting up?

Hi goenig,
yes i do
regards

Go to dowload menu and try to flash stock recovery in your tab..
Here is the stock recovery for p7300/p7310
Start odin, and put the file in pda slot..
See the detail tutorial for flashing with odin herehttp://forum.xda-developers.com/showthread.php?t=1406137

don't worry. samsung devices are really hard to mess up. you just need to go to download mode and flash a stock rom.
you can download any odin rom that is available in the forums.

samsung tab2 10.1 cannot get in recovery mode
goenieg said:
Did you try volume up and start button at the same time when starting up?
Click to expand...
Click to collapse
i bricked my samsung tab2 10.1. the screen shows firmware upgrade encountered as issuee. please select recovery mode in kies and try again. i cannot get into recovery mode by pressing power button+volume up button. the same page loades again which is firmware upgrade encountered...
please help me out as soon as possible..

Which model
Sent from my SAMSUNG-SGH-I727 using xda premium

naveensai said:
i bricked my samsung tab2 10.1.
Click to expand...
Click to collapse
You seen to be in the wrong forum. You are likely to receive better help if you can locate the forum for your device

Bricked Samsung i9000

I have been trying to root my Samsung Galaxy S I9000 without success. I used Odin and flashed I9000XXJVK_kernel.tar but when I switched the phone it doesn't boot. It is stuck on the Galaxy S GT-I9000 white logo with black background. I then tried to install using Odin the CF Root-XW-XEN-JS3v1.3-BusyBox but it failed installing on Odin. Now the worst has happened. My Samsung Galaxy S i9000 will not switch on now. All I get on the display when I try to boot is an exclimation mark icon in the middle of a phone and PC icon. I fear it is bricked.
Anyone know how I can save my phone?
Please advise

I managed to get my Samsung Galaxy back to life with flashing the factory ROM on Odin.
Anyone know how I can root my Samsung without this happening again?

Artmuzz said:
I managed to get my Samsung Galaxy back to life with flashing the factory ROM on Odin.
Anyone know how I can root my Samsung without this happening again?
Click to expand...
Click to collapse
If you need only rooting without cwm then use unlock root Google for it its easy and simple and never brick your phone
Press thanks if helped
Sent from my GT-I9000 using xda premium

Artmuzz said:
I managed to get my Samsung Galaxy back to life with flashing the factory ROM on Odin.
Anyone know how I can root my Samsung without this happening again?
Click to expand...
Click to collapse
Follow http://forum.xda-developers.com/showthread.php?t=2057161

Artmuzz said:
I have been trying to root my Samsung Galaxy S I9000 without success. I used Odin and flashed I9000XXJVK_kernel.tar but when I switched the phone it doesn't boot. It is stuck on the Galaxy S GT-I9000 white logo with black background. I then tried to install using Odin the CF Root-XW-XEN-JS3v1.3-BusyBox but it failed installing on Odin. Now the worst has happened. My Samsung Galaxy S i9000 will not switch on now. All I get on the display when I try to boot is an exclimation mark icon in the middle of a phone and PC icon. I fear it is bricked.
Anyone know how I can save my phone?
Please advise
Click to expand...
Click to collapse
Hey, I need your help bro..
I got my samsung bricked just like you explained here.
http://forum.xda-developers.com/showthread.php?t=2203696
I am stuck at the exclamation mark icon in the middle of a phone and PC icon.
How did you get it working? Can you explain in clear steps? Please!
Any help would be much appreciated !

dipenrique said:
Hey, I need your help bro..
I got my samsung bricked just like you explained here.
http://forum.xda-developers.com/showthread.php?t=2203696
I am stuck at the exclamation mark icon in the middle of a phone and PC icon.
How did you get it working? Can you explain in clear steps? Please!
Any help would be much appreciated !
Click to expand...
Click to collapse
hey m8
check this
http://forum.xda-developers.com/showthread.php?p=7564212
it happened to me too

Rooting failed: Error, and impossible to start or get into download mode! Help!

Hi all,
I hope you can help me. I tried today on a Dutch website to root my phone.
w ww. droidsinfo.nl/root-je-toestel/root-je-toestel-2/root-galaxy-s3-mini-gt-i8190 /
However, after following these steps, I got the following error message:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. "
I tried to get my phone into download mode, but it does not go to this modus anymore. The error message is always showing..
I can also not reboot my phone or whatsoever ..
I have also tried the software Samsung Kies recovery mode, but it has failed to recognize my phone.
Does anyone know what I should do? Hpefully u can help me out!
Pradeep

Dose your phone get on .. "START " .. what do you get on screen

praz88 said:
Hi all,
I hope you can help me. I tried today on a Dutch website to root my phone.
w ww. droidsinfo.nl/root-je-toestel/root-je-toestel-2/root-galaxy-s3-mini-gt-i8190 /
However, after following these steps, I got the following error message:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. "
I tried to get my phone into download mode, but it does not go to this modus anymore. The error message is always showing..
I can also not reboot my phone or whatsoever ..
I have also tried the software Samsung Kies recovery mode, but it has failed to recognize my phone.
Does anyone know what I should do? Hpefully u can help me out!
Pradeep
Click to expand...
Click to collapse
http://2nas.com/howto/diy_jig.html
Make yourself one of these, they work great.

i tried it for my case didnt work hope to work with him please replay praz88 if it work or not

If you're dutch and don't know how to make a JIG... Which are awesome little gimmicks which get you into download mode..
go here: http://usb-jig.nl/
I bought one, used it.. worked..

thanks for replying guys. well, for some reason I managed to get into the download mode, However Samsung KIES is unable to connect to my mobile.
what should i do now. im a complete noob lol.

praz88 said:
thanks for replying guys. well, for some reason I managed to get into the download mode, However Samsung KIES is unable to connect to my mobile.
what should i do now. im a complete noob lol.
Click to expand...
Click to collapse
First of all install the correct drivers this can be done while you install kies connect your gt8190 & your OS then just start to download files after that it should work

ive downloaded the firmware from sammobile and applied it with Odin and now its working again!

Ya weird some times my phone almost hard brick but by luck it got into download mode

[Q] S4A bricked by Kies

Hi folks,
this evening i connected my S4A to my Mac and Kies told me there was an update and i decided to let Kies do what Kies can do (what seemed to be a _big_ failure). Kies messed up while uploading the new firmware to the device after just a couple of percent. After a reboot I now see a screen telling me: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I tried an 'recovery mode' with the recovery-code Kies provided. But this gets also stuck at just a few percent.
My next try was to use Odin with the approriate firmware i managed to download after somer hours (man - some servers are really slow theses days) but then i got the message about a missing PIT. =/
Does anyone have an idea of how i should continue from here on?
Regards,
Skavaer

skavaer said:
Hi folks,
this evening i connected my S4A to my Mac and Kies told me there was an update and i decided to let Kies do what Kies can do (what seemed to be a _big_ failure). Kies messed up while uploading the new firmware to the device after just a couple of percent. After a reboot I now see a screen telling me: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I tried an 'recovery mode' with the recovery-code Kies provided. But this gets also stuck at just a few percent.
My next try was to use Odin with the approriate firmware i managed to download after somer hours (man - some servers are really slow theses days) but then i got the message about a missing PIT. =/
Does anyone have an idea of how i should continue from here on?
Regards,
Skavaer
Click to expand...
Click to collapse
Can you get into download mode at all? And why Kies? Is that all you have is Mac? I would say if you can get into download at all and have access to a windows device to Odin back to stock MF1. Sorry about your luck though

lances1027 said:
Can you get into download mode at all? And why Kies? Is that all you have is Mac? I would say if you can get into download at all and have access to a windows device to Odin back to stock MF1. Sorry about your luck though
Click to expand...
Click to collapse
I can get into download mode and I already tried with Odin in a VirtualBoxed Win7 with the current FW .. (Odin in a VirtualBoxed Win7 to me usually works fine) .. but Odin wanted a PIT.
Why Kies? In my naivity I didn't even in my dreams thought Kies could mess up this bad =/.
Now my dumb question: where can I get a (3-part) stock MF1? Aunt Google was not helpfull.
EDIT: It finally worked - I just had to use the original USB-Cable ..

Good news there! Its amazing how much the cable can make a difference
Sent from my SAMSUNG-SGH-1337 using XDA Premium 4 mobile app

Is there an update? Kies is telling me it does not support an update for my current version (MF3)

skavaer said:
Hi folks,
this evening i connected my S4A to my Mac and Kies told me there was an update and i decided to let Kies do what Kies can do (what seemed to be a _big_ failure). Kies messed up while uploading the new firmware to the device after just a couple of percent. After a reboot I now see a screen telling me: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I tried an 'recovery mode' with the recovery-code Kies provided. But this gets also stuck at just a few percent.
My next try was to use Odin with the approriate firmware i managed to download after somer hours (man - some servers are really slow theses days) but then i got the message about a missing PIT. =/
Does anyone have an idea of how i should continue from here on?
Regards,
Skavaer
Click to expand...
Click to collapse
Exactly the same happened to me. I managed to return to previous state by flashing stock ROM i9295XXUBMK3.
http://forum.xda-developers.com/showthread.php?t=2401301
However my issues with no sound and random reboots remain. How annoying it is to reboot phone once or twice everytime you want to make a phone call. And byebye receiving phonecalls.. If anyone knows solution to this, I'd be glad to try it.

[Q] galaxy gear update failed

i was trying to update to tizen my galaxy gear 1 using kies 3 but the update got stuck on 2% and than i disconnected my galaxy gear from my pc . I pressed the power button for a while and then it showed up in download mode so i tried to update it to tizen but this time with odin and that too failed and now my galaxy gear is just showing dots and lines of random colors. and now nor kies 3 ,2 or odin are detecting it.. Please help help needed
thanks

jordan235 said:
i was trying to update to tizen my galaxy gear 1 using kies 3 but the update got stuck on 2% and than i disconnected my galaxy gear from my pc . I pressed the power button for a while and then it showed up in download mode so i tried to update it to tizen but this time with odin and that too failed and now my galaxy gear is just showing dots and lines of random colors. and now nor kies 3 ,2 or odin are detecting it.. Please help help needed
thanks
Click to expand...
Click to collapse
if you reboot by holding the power for like 10 sec, can you get to recovery? Or download mode?

noellenchris said:
if you reboot by holding the power for like 10 sec, can you get to recovery? Or download mode?
Click to expand...
Click to collapse
No just random colors as I mentioned please help

jordan235 said:
No just random colors as I mentioned please help
Click to expand...
Click to collapse
Hmm, does it charge? It may have been bricked. If there is no chance of returning it or warranty then I'm not sure what to do. Since it seems it's been this way for a few days, you may have to be creative. I've had mine fail a few times via Odin and after a few times holding the power I would get back to the kies screen on the Gear which I would try to fix in the recovery part of kies and that would not work since I wasn't installing the update via Kies. But moral of the story was after trying to see the gear in kies and failing, I again tried with Odin 3.09 and it would see the device again. Where I loaded the Odin version which failed, then rebooted gear and tried 2nd time and closed my eyes.. and it loaded. I would make sure nothing is running in the background ( 1st fail I noticed windows detecting device halfway through Odin flash and that caused my issue).
Also if you have another device like a samsung phone, you may see that device in Odin (only suggest this as a way to test if Odin and windows drivers for samsung device are loaded). But hopefully with some reload of the drivers on you computer (on that....try another computer if possible) you will have some success.
If you try all that and it's a no go and still crazy colors and lines.....only thing I can think of is to let battery die and then connect charger and see if it charge's or goes to charge screen. Let me know if you can get to anything else...
Chris

jordan235 said:
No just random colors as I mentioned please help
Click to expand...
Click to collapse
Ditto - rushed into the update before reading up properly and ending flashing with latest Tizen when I should have used the older version with boothloader. Thought I'd recovered the situation when I managed to flash with Android 4.2.2, Odin showed as completed but the Galaxy Gear continued to be stuck on the downloading screen albeit with a download bar showing however it did not reset. Switched it off after a while and then that's when the corrupt screen started and failure to be recognised by the pc
Any help would be appreciated before it hits the bin.............

Binda69 said:
Ditto - rushed into the update before reading up properly and ending flashing with latest Tizen when I should have used the older version with boothloader. Thought I'd recovered the situation when I managed to flash with Android 4.2.2, Odin showed as completed but the Galaxy Gear continued to be stuck on the downloading screen albeit with a download bar showing however it did not reset. Switched it off after a while and then that's when the corrupt screen started and failure to be recognised by the pc
Any help would be appreciated before it hits the bin.............
Click to expand...
Click to collapse
Did the same, reflashed STOCK 4.4.2 (has to original it came with) and restored android. Then updated to NE9 rom then to NF1... Unfortunately the NF1 rom needs some base files installed in NE9. Can't just jump to lastest...
Then rooted it...

How to unbrick galaxy gear !
Hello friend.. ( u can try this method to unbrick your GG )
Previously im also got the same problem as u when im trying to upgrade my GG1 but after a long search i found this link . What u need is just follow the instructions as given and the important things is dont try to skip anything !
How to UnBrick Galaxy Gear: h*t*t*p://youtube/fS4878klPAQ
( delete * from h t t p coz im not allowed to post link yet )
I hope this will help u coz my GG1 has been recover back .. not to original stock rom but it also upgrade my GG1 to TIZEN !!! :good:
And dont forget to thanks to that guys that send the video and me ( coz i need a credit to post another reply to whom that need a help ) and good luck to u all.
AND TO ADMIN : PLEASE DO NOT BANNED ME COZ IM JUST TRY TO HELP SOMEBODY THAT HAS THE SAME PROBLEM WITH ME .... PEACE !

thanks for posting....will give it a try
update: no joy - pc or odin fail to detect the Galaxy Gear when connected via USB

Try this.. maybe it can help
1 - close odin
2 - connect your samsung phone first with the pc via usb cable
* ( pc will detect your phone and auto install usb driver for it )
3 - disconnect your phone
4 - open odin
5 - connect your GG with odin via usb cable that you use to connect your phone to pc
6 - Repeat back the instruction as given
This happen to me before.. but its works for me
*( sorry to forgot to mention that situation ) ... peace

I've got the same problem with my Gear. Screen with random colored dots and lines. Did anyone find a way to fix this? Any help is appreciated.

Did you get this fixed?