I rooted my device (Sony Xperia Z Ultra) with the EasyRoot_Tool_V9 and got the following problem:
copy Xposed...
Mount /system writable...
mount: permission denied
/system couldnt be mounted writable
Try to continue
Whats the matter? Why cant I mount /system writable? The root checker says that the device is rooted.
Did you gave xposed root access? Check it with supersu/any other root app
Did you try the alternate methods?
Gesendet von meinem GT-N7000 mit Tapatalk
Yeah, it has root access in SuperSU. Wanted to post a screenshot but cant link under 10 posts.
What are the alternate methods?
I think my root got a problem as i cant set /system to r/w even with the root explorer. But how can that be?
You can choose another installation method. Its just underneath the normal method. Try that one.
CCody said:
You can choose another installation method. Its just underneath the normal method. Try that one.
Click to expand...
Click to collapse
Thanks, now xposedBridge.jar is active, but app_process is not.
Flash supersu 2.01 via recovery and try it! Damn whats up there? I dont understand it...
CCody said:
Flash supersu 2.01 via recovery and try it! Damn whats up there? I dont understand it...
Click to expand...
Click to collapse
My bootlocker is not open and because NUT deletet the ZU-lockeddualrecovery2.7.145-BETA.installer.zip i cant boot into recovery, or at least i dont know how to do it :/
Similar problem
I have an Xperia Z1 just updated it to 4.4.4 like 2 hours ago . I updated it from 4.4.2 where i had root , xposed installed and a few modules .
After the update i had to root the device again (using towellroot) . After i did that it said that i did not have the latest version .
Uninstalled all the modules , uninstalled SuperSU and uninstalled xposed and reinstalled them all again . Now super SU cannot update binaries and i get a message in xposed when trying to install it (as in the screen shots) . Root checker says i'm rooted so i have no idea what i can do .
Any help is apreciated !
(i have posted the same message in another place before i found this - sorry for the post here but i do need some help if xda can provide it)
cyrus_0ne said:
I have an Xperia Z1 just updated it to 4.4.4 like 2 hours ago . I updated it from 4.4.2 where i had root , xposed installed and a few modules .
After the update i had to root the device again (using towellroot) . After i did that it said that i did not have the latest version .
Uninstalled all the modules , uninstalled SuperSU and uninstalled xposed and reinstalled them all again . Now super SU cannot update binaries and i get a message in xposed when trying to install it (as in the screen shots) . Root checker says i'm rooted so i have no idea what i can do .
Any help is apreciated !
(i have posted the same message in another place before i found this - sorry for the post here but i do need some help if xda can provide it)
Click to expand...
Click to collapse
I have managed to fix my issue . I have flashed , in my case ,the xperia z1 4.4.4 update using flashtool erasing everything , re rooted the phone with towellroot and after that everything worked fine . SU installed just fine and Xposed installed just fine . I think something went wrong when i rooted the phone the first time after the update .
I have the same issue. I have Z1 compact with 4.4.4, rooted, but with bootloader locked.
I've granted Xposed Installer root rights with Super SU v2.01. XposedBridge.jar is active, but app_process is not.
Didn't get it working with classic nor recovery instalation method. Any idea?
Seems that my device was not completly rooted. After rooting again, it works
Yokurt815 said:
Seems that my device was not completly rooted. After rooting again, it works
Click to expand...
Click to collapse
Great , so it seems that it is an issue when rooting the z1 ... 4.4.4. . To be sure everyone just reroot and it should work just fine !
Disable the RIC File...
Related
Hi
I have tested the root tool from China forum. My device is SGP312 WIFI 32GB 10.3.1.C.0.136. No need to unlocked.
Download the attachment and install. One click and then it will reboot. It is rooted!
But the root-mangement software is Chinese. You can download Supersu or Superuser.
Use the Chinese root software to give Supersu or Superuser root access.
Run Supersu or Superuser and upgrade the binary. Exit and uninstall the Chinese root software.
Reboot. Then you are rooted with Supersu or Superuser.
This is the original link: http://www.mgyun.com/vroot
incredible...works on sgp321 .244......good job....juat install supersu afterwards and remove the chinese app....greatttttt
Good! I can confirm it works, just rooted my still locked SGP311FR with it.
What I don't like it's an exe file, install the app then run it to root.
If someone can extract the script and replace the root apk by superSU it would be cool.
Also I noticed while rooting my tablet that the screen became white two times (really fast for less than a second, sort of blink) like the Display tricks that were used before to root our xperia's.
Anyway thanks.
Btw : @insideccw posting a link to the source, and maybe the name of the autor of this tool, would be better if it's not your own tool.
babylonbwoy said:
Also I noticed while rooting my tablet that the screen became white two times (really fast for less than a second, sort of blink) like the Display tricks that were used before to root our xperia's.
Click to expand...
Click to collapse
That might be the exploit that is accessing the framebuffer causing it.
works like a charm on my sgp351 lte 16gb .244, recomended, thans for the post
Also working with Xperia sp
Sent from my C5303 using Tapatalk 4
I tried this with my 312, but upon removing the chinese superuser with Titanium-backup, i could no longer use Superuser or SuperSU from the play-store. Any insight on to what exactly you guys went about this? I have reset using PC Companion.
Word fine With 4.2.2 thx a lot
Sent from my SGP321 using XDA Premium 4 mobile app
bugger561 said:
I tried this with my 312, but upon removing the chinese superuser with Titanium-backup, i could no longer use Superuser or SuperSU from the play-store. Any insight on to what exactly you guys went about this? I have reset using PC Companion.
Click to expand...
Click to collapse
I think you need to install the alternative superuser app before deleting the Chinese one. I used superuser by chainsdd on my sp
Sent from my C5303 using Tapatalk 4
works great...thanks
That's pretty much what I did. I've tried SuperSU, superuser, and the cwm app. The problem seems to be that the updated binaries don't "stick", SuperSU claimed updating was a success but then prompted me to do so every time I opened it.
bugger561 said:
That's pretty much what I did. I've tried SuperSU, superuser, and the cwm app. The problem seems to be that the updated binaries don't "stick", SuperSU claimed updating was a success but then prompted me to do so every time I opened it.
Click to expand...
Click to collapse
I don't know if the info in this thread may be of any use : http://forum.xda-developers.com/showthread.php?t=1539711.
Specifically in the OP :
Remember, if you remove older first without installing newer one, you will lose Root n newer won't run.
One more thing market version will be regular application, so hard reset can delete it. So better install with flashable zip, to make it system application.
And in Post #8 :
Confirmed working fine! Recommended to install via CWM. It will replace the other (superuser) automatically so you don't have to manually remove it.
I used the above zip file and instructions a long time ago on my Galaxy S....but it may still be relevant for Tablet Z.
What I've been doing us installing from the play store, updating binaries, and then removing the Chinese app. Once I do that, I lose root in the market superSU and other root apps.
I'll probably end up unlocking the boot loader and flashing an image over adb.
Thanks for the help!
bugger
That is because you dont have /system r/w access.
bugger561 said:
What I've been doing us installing from the play store, updating binaries, and then removing the Chinese app. Once I do that, I lose root in the market superSU and other root apps.
I'll probably end up unlocking the boot loader and flashing an image over adb.
Thanks for the help!
Click to expand...
Click to collapse
bugger561 said:
What I've been doing us installing from the play store, updating binaries, and then removing the Chinese app. Once I do that, I lose root in the market superSU and other root apps.
I'll probably end up unlocking the boot loader and flashing an image over adb.
Thanks for the help!
Click to expand...
Click to collapse
It worked for me...I accidentally removed the Chinese app.
1. I did a reroot again.
2. installed dualrecovery and flashed the UPDATE-SuperSU-v1.65.zip.
3. It works now.
Supersu and cwm superuser caused my phone to go in a reboot loop when I tried updating the binaries. Superuser by ChainsDD is working fine though.
Sent from my C5303 using Tapatalk 4
insideccw,
Any tips on how t go about correcting this? Would I need to use adb or can I handle this form within android?
EDIT: Looks like others are having the same issue.
Doesn't work with SGP321 LTE tablet (on the newest firmware .244)
1. in order to uninstall the chinese root app one needs to have SuperSu
2. once you install SuperSU the root checker shows "OK, you're rooted"
3. once you get rid of the chinese root the root checker shows "you're NOT rooted" and the SuperSU binaries can't get updated (strange it needs another update)
Geezer said:
Doesn't work with SGP321 LTE tablet (on the newest firmware .244)
1. in order to uninstall the chinese root app one needs to have SuperSu
2. once you install SuperSU the root checker shows "OK, you're rooted"
3. once you get rid of the chinese root the root checker shows "you're NOT rooted" and the SuperSU binaries can't get updated (strange it needs another update)
Click to expand...
Click to collapse
Works on mine. Update the superuser binaries before deleting Chinese superuser app. On mine, supersu detected the Chinese one and deleted it for me
Sent from my C5303 using Tapatalk 4
bugger561 said:
That's pretty much what I did. I've tried SuperSU, superuser, and the cwm app. The problem seems to be that the updated binaries don't "stick", SuperSU claimed updating was a success but then prompted me to do so every time I opened it.
Click to expand...
Click to collapse
For those of you having this issue as I was, I just got mine to work with SuperSU. Hopefully these steps will work for you too:
-Gain root with the magical Chinese root tool
-install SuperSU
-update SuperSU binaries
-in SuperSU settings, choose "Switch superuser app"
-reboot the tablet and immediately go to the playstore and install SuperSU
-update SuperSU binaries
Let me know if it works!
Hello!
Already got iHackers 2.0 + .290-kernel running (complete installed system) on rooted Z1 (C6903)!
Wanted to grant some apps SuperSu-permission and wanted to check within SuperSu which apps already got granted SuperSu-permissions. SuperSu showed up a message: binary must be updated! So I checked update normal way but install/download failed!
So I've searched www and found that someone mentioned to another guy (got same problem) to download Chainfire 1.51-flashable-SuperSu and this guy mentioned: flash in recovery and do update later on!
I tried and now ROOT HAS GONE!
Is it possible to use KingoRoot now again to get Root-permission back without loosing something (data, dual-recovery, xposed-stuff which is already installed, ...)?
How am i able to get binary for SuperSu up-2-date?
Thanks,
DES75
DESASTER75 said:
Hello!
Already got iHackers 2.0 + .290-kernel running (complete installed system) on rooted Z1 (C6903)!
Wanted to grant some apps SuperSu-permission and wanted to check within SuperSu which apps already got granted SuperSu-permissions. SuperSu showed up a message: binary must be updated! So I checked update normal way but install/download failed!
So I've searched www and found that someone mentioned to another guy (got same problem) to download Chainfire 1.51-flashable-SuperSu and this guy mentioned: flash in recovery and do update later on!
I tried and now ROOT HAS GONE!
Is it possible to use KingoRoot now again to get Root-permission back without loosing something (data, dual-recovery, xposed-stuff which is already installed, ...)?
How am i able to get binary for SuperSu up-2-date?
Thanks,
DES75
Click to expand...
Click to collapse
I got the pro version of SuperSu which fixed that binary problem for me.. As always make a back up of everything just in case. As far as I'm aware you do not have to factory reset or wipe data to root with KingoRoot.
Try it, otherwise I'd personally just go through the procedure again (and wipe data if needed) to get the root back. If you make a back up, it won't be a problem. Just a little time.
Hi!
Do have Pro-Version, too, but SU-Binary will not be updated! So I do need a way to get that SU-Binary updated without loosing Root, ...!
Thx,
DES75
DESASTER75 said:
Hi!
Do have Pro-Version, too, but SU-Binary will not be updated! So I do need a way to get that SU-Binary updated without loosing Root, ...!
Thx,
DES75
Click to expand...
Click to collapse
Strange, I had exactly the same message. Firstly have you got Busybox Installed? Try installing this then updating again.
I'm researching it, a lot of other threads saying you may need to reroot to get it working, but try the above first.
This may help http://forum.xda-developers.com/showthread.php?t=2059440
http://forum.xda-developers.com/showthread.php?t=1847939
P.s try and use the search button. :angel:
Hi everyone! Yesterday I updated my new Sony E1 phone (D2005) to the latest firmware 20.1.A.2.19 with KitKat 4.4.2, and tried to root it with Root Genius 2.2.6: it worked! I just had to install first the ADB drivers shipped with FlashTool and then used Root Genius to root the device. It was as simple as that! I'd like to know if it was just me being lucky or this procedure can be applied to every E1.
Hello Atanor7,
thank you for information. I'll try this asap.
Do you flash a new rom or upgraded from previous one?
Did you remove Genius after boot? Don't install Genius too much bloatwares?
I upgraded from stock firmware via PC Companion (the phone is brand new, purchased yesterday, 70 euros!), then used Genius to root. It's a Windows program, so you have to install nothing on your device, just the ADB drivers on your PC (I used a VM to install so bloatware wasn't an issue for me). After rooting, Genius automatically installs Kinguser to manage root permissions.
Atanor7 said:
I upgraded from stock firmware via PC Companion (the phone is brand new, purchased yesterday, 70 euros!), then used Genius to root. It's a Windows program, so you have to install nothing on your device, just the ADB drivers on your PC (I used a VM to install so bloatware wasn't an issue for me). After rooting, Genius automatically installs Kinguser to manage root permissions.
Click to expand...
Click to collapse
As boatware, I spoke about Kinguser, supposed to be replaced by Supersu
another question: do you kept your settings after upgrade (apps, screens, sms, calls, wifi points, bt devices, ...)?
I can't tell you about that, the phone was new so didn't have any personalization yet, the only settings I made (WiFi, couple of apps) were kept.
Do you think I should replace Kinguser with SuperSU?
Ok, after reading about how KingUser could be a "tricky" app I switched to SuperSU: the "SuperSU-me" app from the store did the job quick and flawlessly. Thank you for your advice
Atanor7 said:
Ok, after reading about how KingUser could be a "tricky" app I switched to SuperSU: the "SuperSU-me" app from the store did the job quick and flawlessly. Thank you for your advice
Click to expand...
Click to collapse
I tried to uninstall kinguser after supersu setup, but IMPOSSIBLE
how did you uninstall kinguser?????
I only can freeze it with titanium, but impossible to remove any file of that f****** app!!!!!
daktary said:
I tried to uninstall kinguser after supersu setup, but IMPOSSIBLE
how did you uninstall kinguser?????
I only can freeze it with titanium, but impossible to remove any file of that f****** app!!!!!
Click to expand...
Click to collapse
Install this app from the Play Store: "Super-Sume" and run it. Hit the button and... it does it all, wipes Kinguser and replaces it with SuperSU, works like a charm!
Thank you for your advice Atanor7, I think I am late for that since I tried to use Super-Sume to replace Kinguser app but it didn't work on my case.
It's good to know that it worked on yours because next time if I reflash my phone I will try to use Super-Sume again.
in my case, I went for old fashion root after unsuccessful attempts on using Super-Sume, I flashed 20.1.A.29 then flashed back the kernel and root with towelroot then flashed back 20.1.A.29 kernel after rooted.
Atanor7 said:
Install this app from the Play Store: "Super-Sume" and run it. Hit the button and... it does it all, wipes Kinguser and replaces it with SuperSU, works like a charm!
Click to expand...
Click to collapse
ok works for me, super-sume didn't ended (probably because supersu was still installed), but after closing app, kinguser was uninstalled without traces
thanks
Atanor7 said:
Hi everyone! Yesterday I updated my new Sony E1 phone (D2005) to the latest firmware 20.1.A.2.19 with KitKat 4.4.2, and tried to root it with Root Genius 2.2.6: it worked! I just had to install first the ADB drivers shipped with FlashTool and then used Root Genius to root the device. It was as simple as that! I'd like to know if it was just me being lucky or this procedure can be applied to every E1.
Click to expand...
Click to collapse
genial
Atanor7 said:
Hi everyone! Yesterday I updated my new Sony E1 phone (D2005) to the latest firmware 20.1.A.2.19 with KitKat 4.4.2, and tried to root it with Root Genius 2.2.6: it worked! I just had to install first the ADB drivers shipped with FlashTool and then used Root Genius to root the device. It was as simple as that! I'd like to know if it was just me being lucky or this procedure can be applied to every E1.
Click to expand...
Click to collapse
Hello Atanor7,
it's my first time that I root a smartphone (it's the same that you have), so I've no experience with what you've written. Can you please make a kind of guide, please ?? Where can I find Rootgenius and the ADB drivers ??? What is flashtool and how to use it ?? Can you link the url to download it ???
Thank you for your gentle reply.
No one can help me ??? Some one other can link me a guide how to root a Sony Xperia E1 D2005 ?? Please help me.
iamnone said:
No one can help me ??? Some one other can link me a guide how to root a Sony Xperia E1 D2005 ?? Please help me.
Click to expand...
Click to collapse
1. Download ADB: https://drive.google.com/file/d/0B0MKgCbUM0itVVFWRC02Q0VBQnc/view
2. Install it.
3. Downlod Root Genius: http://www.shuame.com/en/root/
4. Enable USB Debugging.
5. Launch Root Genius and click on Root. Thats all.
This is driving me nuts... I was on 5.1.1 and I am trying to get it rooted.
I'm following a guide which goes like this..
1. downgrade to kitkat 4.4 using flashtool
2. root 4.4
3. Install custom recovery
4. Flash 5.1.1 pre-rooted zip
I have had problem after problem and I think something may have screwed up along the way.
I finally managed to get kitkat installed using flashtool and a generic C6903 .108 ftf.
Problem 1... I used 'Easy Root tool' from xda to root kitkat... but it seemed to hang at the cleaning up' stage - is this a problem?
Problem 2... every time I restart my phone - kitkat asks what language etc. Whats that all about?
PROBLEM 3. The guide Im following says to install busybox after rooting kitkat.
I've tried 2 different busybox installers and both of them fail when trying to install bb.
QUESTION: Are these 3 problems linked and will it prevent me from continuing with the guide I am trying to follow??? i.e. do I need busybox to install XZ Dual Recovery and therefore a pre-rooted zip?
Root Checker basic says kitkat is rooted, as does the first busybox installer.
I'm taking a short break from this nightmare, so in the meentime if any of you chaps could advise me on whether or not its ok to continue or if I have fecked up the whole process, that would be great.
Thanks in advance
problem 1 : re run the installer again, don't use administrator mode
problem2 : use any simcard on your phone
others, sorry i have no idea, you could download busybox from playstore ?
I would just start over and try a different root program. busybox is failing to install because the root didn't work.
Gamer4Life said:
problem 1 : re run the installer again, don't use administrator mode
problem2 : use any simcard on your phone
others, sorry i have no idea, you could download busybox from playstore ?
Click to expand...
Click to collapse
Problem1... thank you, I'll try again
Problem2... Thanks. I thought It could be the lack of a SIM card and then I thought no! that can't be it lol... as usual - I was wrong ha
others... yeah mate, tried 2 different installers from play store - no joy with either.
Thanks for your help
xasbo said:
I would just start over and try a different root program. busybox is failing to install because the root didn't work.
Click to expand...
Click to collapse
Cheers bud, I'll try 'easy root tool' once more without admin priv, if its the same story I'll start over and try a different root tool. Any suggestions on that?
Also: how come root checker says I'm all good and rooted but busybox wont install? even one of the busybox installers says "Your device is rooted"!?!?
Thanks for all the help mate
i think you don't have supersu installed, and busy box couldn't get root rights
so download supersu from playstore, open it and update binaries as normal, then reboot
and you would be able to install bb
thesweeney80 said:
Cheers bud, I'll try 'easy root tool' once more without admin priv, if its the same story I'll start over and try a different root tool. Any suggestions on that?
Also: how come root checker says I'm all good and rooted but busybox wont install? even one of the busybox installers says "Your device is rooted"!?!?
Thanks for all the help mate
Click to expand...
Click to collapse
Try the suggestion made by @Gamer4Life, just in case you somehow got root but it failed to install the APK needed to manage it. Might save you some work. That would explain why everything thinks you're rooted.
As for an alternative, if you still need it, I think I used kingroot successfully on 4.4.4.
Gamer4Life said:
i think you don't have supersu installed, and busy box couldn't get root rights
so download supersu from playstore, open it and update binaries as normal, then reboot
and you would be able to install bb
Click to expand...
Click to collapse
thanks for the tip mate but no joy see my reply to xasbo, cheers
xasbo said:
Try the suggestion made by @Gamer4Life, just in case you somehow got root but it failed to install the APK needed to manage it. Might save you some work. That would explain why everything thinks you're rooted.
As for an alternative, if you still need it, I think I used kingroot successfully on 4.4.4.
Click to expand...
Click to collapse
Thanks mate. I was hoping Gamer4life might be right as there was no Supersu installed.
I installed supersu from play store no problem... but when I try to update binaries it says' update failed. Please reboot and try again.'. tried reboot but same story.
I guess I'll try 'easy root tool' again and then will give kingroot a bash if needbe.
One last pre-emptive question...
If I root kitkat using kingroot... should I replace kinguser with supersu before proceeding with XZDR and a pre-rooted zip or will kinguser be sufficient to continue.
Many thanks to you and everyone else who has tried to help me with this clusterf*ck,.. I appreciate it
can you screenshot the error you got ?
i reread your op, you don't need busybox to install dual recovery, it installs like the easy root installer, very easy
just one click and you are ready to go
also xzdualrecovery will root your device and install supersu by default if you have kitkat, so you can skip that.
edit (i don't think this will work because towelroot doesn't work on z1 4.4.4 108)
Gamer4Life said:
can you screenshot the error you got ?
i reread your op, you don't need busybox to install dual recovery, it installs like the easy root installer, very easy
just one click and you are ready to go
also xzdualrecovery will root your device and install supersu by default if you have kitkat, so you can skip that.
edit (i don't think this will work because towelroot doesn't work on z1 4.4.4 108)
Click to expand...
Click to collapse
must have been a glitch in the matrix mate becuase its now working (Possibly thanks to your suggestion of installing Supersu?).
I reconnected to PC in order to give 'easy root tool' another crack at it.
As soon as I start install.bat It says checking if device is rooted AND I get a superuser request on my phone for adb.shell - Happy days!
I granted root access to adb shell and the root tool says Job Done. Root success etc.
So I disconnect and try to update su binaries and it worked first go!!!
*Touch wood* I think I'm now past the tricky part and it should be plain sailing from here on in. lol
THANKS for the help Gamer4Life, and everyone else who has chipped in.... hopefully my next post will be to report a fully rooted 5.1.1 :fingers-crossed:
Gamer4Life said:
also xzdualrecovery will root your device and install supersu by default if you have kitkat, so you can skip that.
edit (i don't think this will work because towelroot doesn't work on z1 4.4.4 108)
Click to expand...
Click to collapse
Correct, TowelRoot doesn't work for this version.
---------- Post added at 01:27 PM ---------- Previous post was at 01:26 PM ----------
thesweeney80 said:
THANKS for the help Gamer4Life, and everyone else who has chipped in.... hopefully my next post will be to report a fully rooted 5.1.1 :fingers-crossed:
Click to expand...
Click to collapse
:good: godspeed
@thesweeney80 you are welcome have fun
xasbo said:
:good: godspeed
Click to expand...
Click to collapse
Gamer4Life said:
@thesweeney80 you are welcome have fun
Click to expand...
Click to collapse
you fellas are the muts nuts.
All done, everything went smoothly once I got kitkat rooted properly.
MANY thanks for all your help.
Honestly I wouldnt even bother owning a smartphone if it wasnt for the peeps on XDA... F*cking awesome. THANKS :good: :highfive:
:good: awesome! don't forget to pay it forward sometime.
Hello Fellas,
I have some issues and hope you guys can help me out.
I have a Samsung Note 8 (SM-N950F), I have Rooted it today (Using Exynos menthos) and it went flawless without any Errors. After Rooting my Phone I have Flashed Xposed (by PurifyOS) but it seems not working well and I am not sure if it is the Root the Problem or Xposed.
The Problems are :
1. In Xposed the Modules I have Downloaded seems not working/not getting Activated. I have downloaded AdBlock and Youtube Background, checked both of them and restarted my Phone so the Modules get Activated. Well Youtube Background dosent work & Adblock says "The Module hasnt been Activated" but in Xposed it shows me it is Acivated.
2. I have Downloaded 2 Apps which needs Root Access (Freedom & XModGames) and everytime I launch them it Crash my hole Phone and restart my Phone.
The Root & Flashing Xposed went without any Errors.
Any reason you haven't used the official? Try it, may fix your issue
Also what root are you using?
Sent from my SM-G935F/FD/W8/S/K/L using Tapatalk
Mr.R™ said:
Any reason you haven't used the official? Try it, may fix your issue
Also what root are you using?
Sent from my SM-G935F/FD/W8/S/K/L using Tapatalk
Click to expand...
Click to collapse
Before I Flashed Xposed (by PurifyOS) , I have Flashed a another Xposed (not sure if it was the official one) but it Failed install. /Reason : Required ARM64 Type, Xposed Type : ARM/
I Rooted my Phone using this Tutorial : https://forum.xda-developers.com/galaxy-note-8/how-to/guide-how-to-root-note8-efs-backup-t3677038 (Root with SuperSU)
So I have a new Error,
"SU Binarz Occupied"
Help pls ;c