Database Develop

How to unroot my verizon tab

Alright guys i have searched and tried and tried. Currently i am on dj11 with kernal version stated as 2.6.32.9 and right below it has [email protected]#3. I am on 2.2
So what ive tried:
-I used heimdall to flash back to stock but as you can see the kernal version says im still rooted although superuser app is not installed. This causes the update to fail
-I tried to use superoneclick method to unroot but it does not work
What i want is to be stock with no root and be able to update. Any help or suggestions would be appreciated.
FYI i also used all the thread procedures on the forum (gizmo ninja and how to unbrick tab)

Try using this stock unrooted rom. Link below:
http://forum.xda-developers.com/showthread.php?t=1136587

TabFreak said:
Try using this stock unrooted rom. Link below:
http://forum.xda-developers.com/showthread.php?t=1136587
Click to expand...
Click to collapse
i believe i tried that already and it still had the words "rooted" under the kernal version. It also didnt allow me to update. I will try it again.

Try this instead.
http://forum.xda-developers.com/showthread.php?t=1033586
The second link takes you to the files.

TabFreak said:
Try this instead.
http://forum.xda-developers.com/showthread.php?t=1033586
The second link takes you to the files.
Click to expand...
Click to collapse
Will try now. Ahh I hope this works!

killerapl said:
Will try now. Ahh I hope this works!
Click to expand...
Click to collapse
Flashed and guess what?? Didnt work. Kernal version still says 2.6.32.9 [email protected] Ugh!!!

Don't know what the problem could be. That has always worked for me. If you go to the "System-- About Device-- System Updates" does it give you the option to update? When I have restocked mine and set up a wireless connection it always tries to download and install the update.

TabFreak said:
Don't know what the problem could be. That has always worked for me. If you go to the "System-- About Device-- System Updates" does it give you the option to update? When I have restocked mine and set up a wireless connection it always tries to download and install the update.
Click to expand...
Click to collapse
Yeah it does. Goes halfway and then stops and has exclamation mark. I tried gizmoninjas method to update but still quits. I'm totally lost.
Sent from my SCH-I510 using XDA App

I don't know what to do. If it were me I would go ahead and grab the EC02 update from here: http://www.blackmugmedia.com/Android/GT/Mirror/Roms/CDMA/Recovery to Stock /
Flash that. You will have the latest official release, or you could get the VZW Leaked Gingerbread release from the Developers section. (That is what I am running on my VZW tab).
Maybe if you flashed the EC02 update and then used the going back to stock instructions it would unroot you. I have always unrooted using that rom and directions when I wanted to start fresh from a custom rom that didn't quite work like I wanted it to work.

TabFreak said:
I don't know what to do. If it were me I would go ahead and grab the EC02 update from here: http://www.blackmugmedia.com/Android/GT/Mirror/Roms/CDMA/Recovery to Stock /
Flash that. You will have the latest official release, or you could get the VZW Leaked Gingerbread release from the Developers section. (That is what I am running on my VZW tab).
Maybe if you flashed the EC02 update and then used the going back to stock instructions it would unroot you. I have always unrooted using that rom and directions when I wanted to start fresh from a custom rom that didn't quite work like I wanted it to work.
Click to expand...
Click to collapse
I will give that a shot. The current gb leak is rooted. I did post asking to see if they (oldmacnut) had the unrooted version. Personally I like the rooted option but I do want to sell the tab and can't sell it rooted unless the person doesn't care. Bedside this issue the tab is fine and working properly.
Thank you so much for all your help. I will keeep you posted on the outcome.

Nope didn't work. Still rooted. I'm so over this hahah
Sent from my SCH-I510 using XDA App

I am at a loss. I know there are ways to get this done, but I have no idea where you can go from here. Not an expert, sorry!

TabFreak said:
I am at a loss. I know there are ways to get this done, but I have no idea where you can go from here. Not an expert, sorry!
Click to expand...
Click to collapse
There has to be. Wish it was like my Droid charge and just flash via Odin. If I can get the ginerbreak leak with no root I will be happy.
Or sell it to someone that doesn't mind its rooted.
Sent from my SCH-I510 using XDA App

There is a unrooted version of Gingerbread that you can flash with Odin:
http://www.mydroidworld.com/forums/...w-sprint-2-3-4-ef01-rooted-updated8-15-a.html
I haven't used Odin, but if you are familiar with it you might have luck with this. I think you use 7zip to extract and then use the resulting md5 file in the One Package location. You might want to look there and get that file.

TabFreak said:
There is a unrooted version of Gingerbread that you can flash with Odin:
http://www.mydroidworld.com/forums/...w-sprint-2-3-4-ef01-rooted-updated8-15-a.html
I haven't used Odin, but if you are familiar with it you might have luck with this. I think you use 7zip to extract and then use the resulting md5 file in the One Package location. You might want to look there and get that file.[/QU
I'm gonna give it a try tomorrow. I just have to make sure if I flash under phone or PDA with Odin. Don't know if you know. For phones its PDA. Not sure with tabs. Thank you so much
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse

I just tried this.
Unzip the .md5 file with 7zip, you will get an error about no proper ending or something. Take your zimage, cache, param, dbdata, factoryfs, recovery.bin and place them in the proper locations in Heimdall. Flash your tab and let it boot up.
You should have a fully functional gingerbread without root.
I just did it on my tab.

TabFreak said:
I just tried this.
Unzip the .md5 file with 7zip, you will get an error about no proper ending or something. Take your zimage, cache, param, dbdata, factoryfs, recovery.bin and place them in the proper locations in Heimdall. Flash your tab and let it boot up.
You should have a fully functional gingerbread without root.
I just did it on my tab.
Click to expand...
Click to collapse
You effin rock!!! It worked! I now have non rooted stock gingerbread. Thank you for all your help and investigation for the right files. Youre awesome. Now time to sell this baby
Or i spent so much time doing this i think im attached now hahaha

Glad it worked the way you wanted. I went back to the rooted version of Gingerbread. Everything works the way I want it to so no reason to change (for now anyway).

[Q][ODIN][FIRMWARE][4.4.2][i537]Odin files request

I'm requesting someone find the Odin files to flash to an i537 model for KitKat 4.4.2, as I can't find it anywhere. If I can't, I'll go to Samsung at Best Buy and uh..... Ask for the Odin files(they use Odin there XD)
Please help as ODIN is the only way I have been able to update, OTAs fail and recovery install from cache, external SD fails. Everything but Odin fails, so anybody help?
Device details-
SGH-i537 AT&T running 4.3 Official Unrooted Stock
Thanks!!!

Have you tried flashing the 4.3 firmware then flashing the OTA? At this time I don't think they have released a full Odin 4.4.2

popfan said:
Have you tried flashing the 4.3 firmware then flashing the OTA? At this time I don't think they have released a full Odin 4.4.2
Click to expand...
Click to collapse
Yeah, I tried it all my friend, I need the Odin files.

yes i too in fact need the odin files asap. I know nobody likes being asked for ETA's but how long does it usually take to get the ODIN files?

jimmietilt said:
yes i too in fact need the odin files asap. I know nobody likes being asked for ETA's but how long does it usually take to get the ODIN files?
Click to expand...
Click to collapse
Considering we never got the Odin files for MF2 or MF3, we may never get Odin files for NC9.

Just do a hard reset (VOL+/HOME/POWER), boot your phone then do a Factory reset from within the phone with selecting format SD card option (back your stuff up!). Then go back, enable USB debugging and flash the stock ML2 firmware EXCEPT for the BL file! then re-enable USB debugging and download the 2400258.cfg file from here, rename it to update.zip and flash it via stock recovery, problem solved. As for the ODIN files, here's a good read on why @Devo7v is right with his assessment on not ever seeing them. More info on the stock SGH-i537 firmware here.

jkeuclid said:
Just do a hard reset (VOL+/HOME/POWER), boot your phone then do a Factory reset from within the phone with selecting format SD card option (back your stuff up!). Then go back, enable USB debugging and flash the stock ML2 firmware EXCEPT for the BL file! then re-enable USB debugging and download the 2400258.cfg file from here, rename it to update.zip and flash it via stock recovery, problem solved. As for the ODIN files, here's a good read on why @Devo7v is right with his assessment on not ever seeing them. More info on the stock SGH-i537 firmware here.
Click to expand...
Click to collapse
I tried that. Didn't work XD The only thing that works for me is forcing the update through ODIN.

Devildude24 said:
I tried that. Didn't work XD The only thing that works for me is forcing the update through ODIN.
Click to expand...
Click to collapse
How are you forcing the update through Odin? We don't have the Odin files for 4.4.2, so I'm not sure what you mean. Do you mean you can only flash the 4.3 files with Odin and you cannot get the cfg file to flash through stock recovery?

Devo7v said:
How are you forcing the update through Odin? We don't have the Odin files for 4.4.2, so I'm not sure what you mean. Do you mean you can only flash the 4.3 files with Odin and you cannot get the cfg file to flash through stock recovery?
Click to expand...
Click to collapse
Yes, sorry for the confusion. I forced 4.3 through ODIN and the cfg file doesn't work, in all possible ways. And it won't work when renamed to update.zip either.

Devildude24 said:
Yes, sorry for the confusion. I forced 4.3 through ODIN and the cfg file doesn't work, in all possible ways. And it won't work when renamed to update.zip either.
Click to expand...
Click to collapse
Did you check the MD5 to make sure that it downloaded properly? My suggestion would be to download it with a computer, rename it to "update.zip" on a computer, copy it to your internal memory on the phone, and flash it through stock recovery. This should work, what errors do you get when you try to flash it? You're on stock 4.3 when you try to update, correct? In order to flash the OTA you cannot be rooted or have modified the system in any way.

Devo7v said:
Did you check the MD5 to make sure that it downloaded properly? My suggestion would be to download it with a computer, rename it to "update.zip" on a computer, copy it to your internal memory on the phone, and flash it through stock recovery. This should work, what errors do you get when you try to flash it? You're on stock 4.3 when you try to update, correct? In order to flash the OTA you cannot be rooted or have modified the system in any way.
Click to expand...
Click to collapse
Good advice and I'll further add make sure when you rename the 2400258.cfg that you have known file extensions enabled and then right click and highlight the entire file "2400258.cfg" and then rename that to "update.zip"
Trust us, this will work.
Sent from my SAMSUNG-SGH-I537 using XDA Premium 4 mobile app

jkeuclid said:
Good advice and I'll further add make sure when you rename the 2400258.cfg that you have known file extensions enabled and then right click and highlight the entire file "2400258.cfg" and then rename that to "update.zip"
Trust us, this will work.
Sent from my SAMSUNG-SGH-I537 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah, I tried that. I tried everything, literally everything. Like Samsung told me they couldn't help me unless I sent it in. (Probably just send a replacement or do a full reset with a new partition and data)

Devildude24 said:
Yeah, I tried that. I tried everything, literally everything. Like Samsung told me they couldn't help me unless I sent it in. (Probably just send a replacement or do a full reset with a new partition and data)
Click to expand...
Click to collapse
I'm almost positive you're doing something wrong since you're the only one that is having this problem. I know @jkeuclid has already walked one person through this process step-by-step, I don't want to speak for him but he'd probably be willing to do the same for you.

Devo7v said:
I'm almost positive you're doing something wrong since you're the only one that is having this problem. I know @jkeuclid has already walked one person through this process step-by-step, I don't want to speak for him but he'd probably be willing to do the same for you.
Click to expand...
Click to collapse
Thank you. UPDATE-
I checked, my Baseband version and Build Number don't match.... MF1 vs. ML2. So that could be presenting some of the problem. I'm going to try to find a partition file for stick 4.3 then rehash everything through ODIN and attempt an update. Any other suggestions anyone?

Devildude24 said:
Thank you. UPDATE-
I checked, my Baseband version and Build Number don't match.... MF1 vs. ML2. So that could be presenting some of the problem. I'm going to try to find a partition file for stick 4.3 then rehash everything through ODIN and attempt an update. Any other suggestions anyone?
Click to expand...
Click to collapse
Did you ever figured this out? I'm having the same issue. Can't update using the cfg file.

Just my quess but the OP and others in this thread have possibly problem understanding relationship of Odin with Stock Recovery
If your phone is stock 4.3 and you have the 444 MB update renamed to update.zip already moved over to microSD card.....
See if this little video helps you
https://www.youtube.com/watch?v=B8TOJkBOZfs

Please Help
Devildude24 said:
I'm requesting someone find the Odin files to flash to an i537 model for KitKat 4.4.2, as I can't find it anywhere. If I can't, I'll go to Samsung at Best Buy and uh..... Ask for the Odin files(they use Odin there XD)
Please help as ODIN is the only way I have been able to update, OTAs fail and recovery install from cache, external SD fails. Everything but Odin fails, so anybody help?
Device details-
SGH-i537 AT&T running 4.3 Official Unrooted Stock
Thanks!!!
Click to expand...
Click to collapse
Please I need your help, I was trying to upgrade to 4.4 from 4.3 ML2, on i537, but when i did, I lost my wifi and camera and media, (I mean , I cant play any song, show me a message that cant play, "File not Suppoted') anyways, the help that I need is if you can help me with your stock rom, so I can flash my phone with your files, please. Im downgrade to 4.3 again and I used one backup that I did before upgrade, but still not work wifi and media, I already flashed the moden.bin from xda to fix wifi, but still not work, I want to try to flash a Real stock rom, and see what happen, cause Im very stress...

Please help

Hi im having difficulty restoring my g900a back to stock. i think i found the stock firmware from zedomax and it works but im still having a problem. on his video he is extracting ONE file but when i download the att firmware there is 4 and im pretty sure i need all the fiels to be flashed. is there a way to do that? here is the file http://galaxys5root.com/galaxy-s5-stock-firmware/
when i unzip there is 4 tar files. i did the biggest one but i think im missing the bootloader, recovery ect. please help anyone ive tried different stock firmwares on xda and all of them just fail. thanks guys.

What method are you using to flash? Odin or safestrap? Do you have safestrap installed?

feelinfroggy23 said:
Hi im having difficulty restoring my g900a back to stock. i think i found the stock firmware from zedomax and it works but im still having a problem. on his video he is extracting ONE file but when i download the att firmware there is 4 and im pretty sure i need all the fiels to be flashed. is there a way to do that? here is the file http://galaxys5root.com/galaxy-s5-stock-firmware/
when i unzip there is 4 tar files. i did the biggest one but i think im missing the bootloader, recovery ect. please help anyone ive tried different stock firmwares on xda and all of them just fail. thanks guys.
Click to expand...
Click to collapse
It might be the actual stock ROM (I didn't check that particular file you mentioned) but in general the stock ROM for this phone comes in four files which begin with the following:
AP, CP, CSC, BL
You can load those in their corresponding spots in Odin (BL in bootloader, and so on)
Or you can head over to sammobile and download the stock firmware, which is a Samsung Kies dump file. This is one giant tar ball ( like the one in the video) which you'll just load into the PDA section of Odin 3.09 and flash away.

When you're clicking on ODIN are you running it as Admin? Also see the guy in the video using a USB 2 cable.

yes i am running as admin. it only works when i only use pda. when i put in the bl and csc and cp is keeps failing. after if flashed the pda file the phone reboots and freezes on the samsung screen. should i try doing it one by one?

it wont work still failing. should i flash one by one?

I did but i cant load it. i only get to the samesung logo and it freezes. only thing i can get into is download mode and the stock recovery. is there a way to boot into safestrap when phone is off? im running out of ideas and ive tried to do it on different computers and cords.

it seems like the bootloader file is the only one not working. do you have any idea? please please please help guys

feelinfroggy23 said:
it seems like the bootloader file is the only one not working. do you have any idea? please please please help guys
Click to expand...
Click to collapse
Don't flash the bootloader and you should be fine

I tried that and it still freezes on Samsung logo. Does anyone have a legit firemware I've tried the ones on here or does anyone know how to get the one from sammobile? Really appreciating the help
Sent from my RM-975_1005 using XDA Windows Phone 7 App

Download the G900A_Downgrade_to_NCE.tar from here:
https://www.androidfilehost.com/?fid=23622183712464416
Use Odin 3.09 and flash in AP slot. Once it is done then take the OTA for NG3 then OA1
Thanks to @muniz_ri
Sent from my SAMSUNG-SM-G900A

Waiting4MyAndroid said:
Download the G900A_Downgrade_to_NCE.tar from here:
https://www.androidfilehost.com/?fid=23622183712464416
Use Odin 3.09 and flash in AP slot. Once it is done then take the OTA for NG3 then OA1
Thanks to @muniz_ri
Sent from my SAMSUNG-SM-G900A
Click to expand...
Click to collapse
the download says thats for the gs4?

feelinfroggy23 said:
the download says thats for the gs4?
Click to expand...
Click to collapse
It is the right tar. I have used it many times to go back to stock after root.
Sent from my SAMSUNG-SM-G900A

Can you walk me through your process please?
Sent from my RM-975_1005 using XDA Windows Phone 7 App

feelinfroggy23 said:
I tried that and it still freezes on Samsung logo. Does anyone have a legit firemware I've tried the ones on here or does anyone know how to get the one from sammobile? Really appreciating the help
Sent from my RM-975_1005 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Use the G900A_DOwngrade_to_NCE.tar from this link http://forum.xda-developers.com/att-galaxy-s5/general/how-to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120 and flash in the pda. that should fix your problem.

feelinfroggy23 said:
Can you walk me through your process please?
Sent from my RM-975_1005 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Download the G900A_Downgrade_to_NCE.rar. Unzip and you should get this file "G900A_Downgrade_to_NCE.tar.md5". Now Run Odin 3.09 as admin, and put your phone in download mode. In Odin click on the AP icon and point to the G900A_Downgrade_to_NCE.tar.md5. Wait until Odin finishes loading the file it takes some time. Plug usb cable to your phone while in download mode. Once Odin is ready click start. Wait until Odin is done. Your phone will reboot once the flash is done. Please Thank @muniz_ri for his hard work.

Yea. Prolly should have checked this forum before you went on the journey.
---------- Post added at 10:45 PM ---------- Previous post was at 09:56 PM ----------
Now, Instead of making sarcastic comments, I will provide some assistance. There is one thing left out of all of these tutes that took me a while to catch on to. As a result, my phone was doing the same thing.
When you follow the downgrade instructions, yes leave out the boot loader. Sometimes, the downgrade doesn't do the job properly, so you'll have to go to this thread, scroll to the very bottom post and you'll see a link for "G900A_NCE_Stock_Modem"
You will need to flash this along with the stock firmware. It should correct the boot issue. (Flash in PDA slot)
Furthermore, you will not be able to update via WiFi OTA. You'll have to download the official update files in .zip format.
Go to this thread for the " G900A_NCEtoNG3_OTA.zip" to update from NCE to NG3.
This next step is optional, but it won't hurt to try it. Go here and grab the stock NG3 modem and recovery. Flash each (one at a time) in the PDA slot.
My personal opinion of the 4.4.4 update is low. There are many issues with it. But if you're trying get the phone completely up to date then:
Go here for the final update.
You should now be set. Please thank @muniz_ri for his unrelenting dedication to helping others.
It is not my intention to be an ass, but you should begin with google, and then search entire AT&T forum before posting questions like this. Chances are, others have had the same problem, asked, and received a solution exactly like this.
Anyways, I hope I was able to guide you in the right direction...
Edit: It seems that both of the update zips are in the OA1 root guide thread.
P.S.
Your phone is from AT&T, right?

[Q] Rooting AT&T Note 3 Lollipop

Hello! I have been searching the forums and google, but still a little confused on a few things and hoping you guys can help me out.
I have the stock AT&T Note 3 on Lollipop (N900AUCUEOC2) and I am wanting to root the device. From my understanding, I am needing to downgrade the baseband version via Odin, then root. I did come across this post in an older thread (I didn't want to resurrect an old thread):
Rooted i747 said:
You can't root OC1, but you can use Odin to downgrade to NC2 and root it. Odin v.3.10.6 http://forum.xda-developers.com/attachment.php?attachmentid=3109599&d=1420980613. Once you Odin back you can use Towel root or Kingo root (links are posted above your post). Then install Supersu https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en and run it, install Busybox https://play.google.com/store/apps/details?id=stericson.busybox&hl=en open and install it, then Safestrap http://forum.xda-developers.com/devdb/project/dl/?id=7216. (You should make a backup once Safestrap is installed before you flash any Roms). Once you're done you can pick a Rom for your Note 3 http://forum.xda-developers.com/note-3-att/development Now you ever use Odin? http://www.samsungodindownload.com/odin-tutorial/ (The site only shows flashing the All-In-One file so you know). Use all 4 Odin files, N900AUCUCNC2 ODIN Files, BL https://www.androidfilehost.com/?fid=96042739161891602 AP https://www.androidfilehost.com/?fid=96042739161891890 CP https://www.androidfilehost.com/?fid=96042739161891603 CSC https://www.androidfilehost.com/?fid=96042739161891604
Click to expand...
Click to collapse
But, this was in response to a person with the baseband version of N900AUCUEOC1 while I am on N900AUCUEOC2. Can I follow these same instructions using the same 4 files he uploaded or will that brick my phone? Or, is there a different method you guys recommend to rooting my phone?
Many thanks!

mrpicklebottoms said:
Hello! I have been searching the forums and google, but still a little confused on a few things and hoping you guys can help me out.
I have the stock AT&T Note 3 on Lollipop (N900AUCUEOC2) and I am wanting to root the device. From my understanding, I am needing to downgrade the baseband version via Odin, then root. I did come across this post in an older thread (I didn't want to resurrect an old thread):
But, this was in response to a person with the baseband version of N900AUCUEOC1 while I am on N900AUCUEOC2. Can I follow these same instructions using the same 4 files he uploaded or will that brick my phone? Or, is there a different method you guys recommend to rooting my phone?
Many thanks!
Click to expand...
Click to collapse
As long as you use all four files, you won't have any problems.

Rooted i747 said:
As long as you use all four files, you won't have any problems.
Click to expand...
Click to collapse
Thanks for the quick response! I will be trying this shortly and let you know when it succeeds

Sorry for the double post, but it has successfully been rooted! I initially had a Korean popup in Odin upon plugging in my phone. Using a different PC resolved that issue. Other than that, zero issues. Greatly appreciate the help!

Will this method trip the knox counter? If I understand it properly I don't think it will, but I just want to verify.

groundslug said:
Will this method trip the knox counter? If I understand it properly I don't think it will, but I just want to verify.
Click to expand...
Click to collapse
No, will not trip Knox.

Rooted i747 said:
No, will not trip Knox.
Click to expand...
Click to collapse
I have a note 3 n900aucueoc2 try this but it fails. got all 4 files. any recommendation .

Phone in download mode?
Sent from my SM-N9005 using XDA Premium 4 mobile app

Rooted i747 said:
Phone in download mode?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ok i did not do that thanks going to try it

Im wanting to root my att note 3 on the oc2 firm ware but using heimdall if possible. I don't have access to a windows pc right now. Any way to do this. Heimdalls front end just does not have a gui much like odins at all. Tried jodin or what ever it wont work at all.

Could you tell me what do with Odin? Do I have to do anything after downloading it? And do I have to use Safe Strap if I'm not flashing any ROMs? Thanks :thumbup:

Rooted i747 said:
As long as you use all four files, you won't have any problems.
Click to expand...
Click to collapse
Where do you get the 4 files?

Darth Rache said:
Where do you get the 4 files?
Click to expand...
Click to collapse
From the first post where I was quoted from (pictured below). Each one has two letters in front of it so you know where it goes in Odin N900AUCUCNC2 ODIN Files, BL https://www.androidfilehost.com/?fid=96042739161891602 AP https://www.androidfilehost.com/?fid=96042739161891890 CP https://www.androidfilehost.com/?fid=96042739161891603 CSC https://www.androidfilehost.com/?fid=96042739161891604

[/COLOR]Also after I flash all 4 files in Odin what do I do next?
Sent from my Nexus 6 using Tapatalk

It failed in Odin mode and yes it was in boot loader mode. I'm on v0C2
Edit, the AP file failed to download all 2.1gb I'm re downloading the AP file that's why it failed.
Sent from my Nexus 6 using Tapatalk

//SM-G935A\\ **Stock Odin files G935AUCU4BQA6**

Here is stock odin firmware .. you can update or just simply return back to stock!
This is Nougat 7.0
AP_G935AUCU4BQA6_G935AATT4BQA6_CL10280464_QB12418931_REV02_user_low_ship_MULTI_CERT.tar.md5
BL_G935AUCU4BQA6_G935AATT4BQA6_CL10280464_QB12418931_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G935AUCU4BQA6_G935AATT4BQA6_CL10280464_QB12418931_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_G935AUCU4BQA6_G935AATT4BQA6_CL10280464_QB12418931_REV02_user_low_ship_MULTI_CERT.tar.md5
https://www.androidfilehost.com/?fid=745425885120713605

When will these be uploaded

killa82783 said:
When will these be uploaded
Click to expand...
Click to collapse
Its uploaded

JUSMEJOSE said:
Its uploaded
Click to expand...
Click to collapse
Awesome!!! Noguat Odin!!!!
Sent from my SAMSUNG-SM-G935A using Tapatalk

Thank you for being quick. I upgraded to Nougat and then tried to root and my phone stuck in recovery mode boot loop. I was able to downgrade to 6.0.1 with odin md5 file. This will help get back to Nougat and attempt to root again.

What version of odin did you use and where did you get these files from?

omg...thank you thank you thank you thank you!

If I'm on the U firmware can I update directly to this via Odin?

t12icky0 said:
If I'm on the U firmware can I update directly to this via Odin?
Click to expand...
Click to collapse
Yes
Sent from my SAMSUNG-SM-G935A using Tapatalk
PS everyone be sure to hit that thanks button if someone helped you. Especially the Original Poster.
70 downloads and only 5 thanks seems a little unreasonable for the first Odin 7.0 files.

I have an att branded S7 Edge with 935u FW on 6.0.1. Flashing these files will update me to Nougat correct? Also what version of Odin should I use to flash? TIA!

dray said:
I have an att branded S7 Edge with 935u FW on 6.0.1. Flashing these files will update me to Nougat correct? Also what version of Odin should I use to flash? TIA!
Click to expand...
Click to collapse
Either Odin should work and yes.
Sent from my SAMSUNG-SM-G935A using Tapatalk

Oh how I wish I had this when I softbricked my device last weekend, had to flash the tmo firmware over the non booting at&t firmware

flashed this a couple of days ago and so far everything is great.

when I unzzipped the files, I see 4 zip files ending with .tar, they just need to be placed in odin to flash, correct? Or do I need to rename them to .md5

vineet381 said:
when I unzzipped the files, I see 4 zip files ending with .tar, they just need to be placed in odin to flash, correct? Or do I need to rename them to .md5
Click to expand...
Click to collapse
No need to rename. When you open Odin you'll add the files to Odin using the buttons (BL,AP,CP,CSC) AP will take a while, be patient. After all added, hit start and sit back

S7.Active
JUSMEJOSE said:
Its uploaded
Click to expand...
Click to collapse
do you have ANYTHING for the S7Active's ?? (G891A)
Odin Nougat, or even a root img ? ..

miniminus said:
do you have ANYTHING for the S7Active's ?? (G891A)
Odin Nougat, or even a root img ? ..
Click to expand...
Click to collapse
yes i do

double post soz..

JUSMEJOSE said:
yes i do
Click to expand...
Click to collapse
anything that you could share ? ..
especially if its for Odin and newer than PI2, even better if its Nougat !
even better still, root for Nougat !
Many Thanks for any info...

This went very smoothly, seems to run great I have no voLTE functionality though. I came from 935U is there something I have to do to have that feature working again?