Database Develop

S3 LTE I9305 kies not support udate problem help

Hi threre,my s3 lte i9305 was rooted but i installed the originla stock ee uk rom and reset the counter but kies still saying your device current firmware virsion not support update via kies..
i tried the change csc app but its not working and i cant find any option to change csc,it must got the original uk csc as i flashed the uk ee rom..
can you please help me to sort the problem.?
or any one got the diffrent csc files so i can try others..?
please help.
thanks

Did you try Factory reset? Reseting counter doesn't change your status. What is your Device Status? Normal or Modified? Also, you can dial *#1234# to check your CSC.
My CSC was changed to OPS or something after flashing Pandoriam Rom (made in Australia ). Few days ago I've came back to stock by using EE pre-rooted ROM from here. Now my CSC is EVR (BLL1 - EE UK)

djembey said:
Did you try Factory reset? Reseting counter doesn't change your status. What is your Device Status? Normal or Modified? Also, you can dial *#1234# to check your CSC.
My CSC was changed to OPS or something after flashing Pandoriam Rom (made in Australia ). Few days ago I've came back to stock by using EE pre-rooted ROM from here. Now my CSC is EVR (BLL1 - EE UK)
Click to expand...
Click to collapse
my device says normal and my csc is also EVR..
i did the factory reset from stock recovery but still getting the same messege in kies..

[Q] Modem and Carrier Unlock problems with a foreign i9305

Hi, I had a P990 (who is simply un-brickable), so I'm comfortable with CWM, I ask to a friend who was passing by France to buy a i9305 for me, he bought one in SFR France, and delivered to me in Brazil.
Neither I or he knows if the phone has some type of carrier lock or something like that, the ROM is full of bloatware from SFR, I make the update on the phone over wi-fi (think it's called FOTA update, right) and now I'm on JB 4.1.2 version.
With *#1234# command, the info that shows is:
AP: I9305XXBMB4
CP: I9305AEBMB1
CSC: I9305SFRBMB1
Other info that could help:
Build Number: JZO54K.I9305XXBMB4
My problem is that trying to use my carrier in Brazil (VIVO), the phone has a very poor signal, it even sometimes in the signal strength at notification bar puts a Ø in place of the signal.
Other think that bugs me, is that in About device > Status, the field "My phone number" shows Unknown.
When I get the Ø in notification bar, if I go to About device > Status, the field "Service state" shows Disconnected, even if Signal Strength has more than 7 asu (think 7 asu is the minimum to get signal, right?)
So, my questions are:
1) Do I need to flash other ROM, CSC or modem, to get a good service in Brazil? Because phone is 100% stock from SFR France.
2) How can I know if the phone is carrier locked or something like that? If I flash a custom ROM, (like rXTREME) it will unlock carrier for me?
I have already make a backup of my IMEI using the tutorial in the DEV Section of our phone HERE and got the 250KB file.
Thanks for helping me =)

Do I need to flash other ROM, CSC or modem, to get a good service in Brazil? Because phone is 100% stock from SFR France.
Flash modem and c|Sc for your carrier .
2) How can I know if the phone is carrier locked or something like that?
Ni network on any other sim .
If I flash a custom ROM, (like rXTREME) it will unlock carrier for me?
NO
jje

JJEgan said:
Do I need to flash other ROM, CSC or modem, to get a good service in Brazil? Because phone is 100% stock from SFR France.
Flash modem and c|Sc for your carrier .
2) How can I know if the phone is carrier locked or something like that?
Ni network on any other sim .
If I flash a custom ROM, (like rXTREME) it will unlock carrier for me?
NO
jje
Click to expand...
Click to collapse
Ok, but I go to SamMobile to get a firmware for my country (Brazil) and no GT-9305 firmware was for Brazil, only GT-9305T.
I find that the only difference is the 4G signal that the international version has more bands (800/1800/2600) than the GT-9305T (1800/2600).
My new questions are:
1) What's the differences from GT-9305 and GT-9305T?
2) Can I flash a CSC and Modem of a GT-9305T on my GT-9305 (without T)? It will not brick my phone?

Nice question i was wondering that too if it was possible to do so ?!
Thx
GaLaXy S3 I93o5 1s th3 b3st s0 faR ...☆♡☆

Need Baseband For Australia [telstra]

i finally got a stock RUU on my phone to work , however there is a Unkown baseband and im not able to connect to any network not even wifi, i'd like a baseband that is either for unlocked devices or for Australian Telstra.
I have a 64 bit model A11UL if you need any other info let me know

Vmo x said:
i finally got a stock RUU on my phone to work , however there is a Unkown baseband and im not able to connect to any network not even wifi, i'd like a baseband that is either for unlocked devices or for Australian Telstra.
I have a 64 bit model A11UL if you need any other info let me know
Click to expand...
Click to collapse
Where did you get the stock RUU from?

blaqueknight said:
Where did you get the stock RUU from?
Click to expand...
Click to collapse
from this site... it was not meant for my Version of phone but some how i got it to work.... anyway i just need to be able to flash a working base band -.- even if its not for telstra just so wifi works and i can update my apps so i can connect to HTC sync which should fix it all through system update i have a backup on HTC sync so hopefully that works......

help please

I have a sm-n950u1 and live in canada and use freedom mobile.. I was running the 950w firmware and by mistake flashed the new 4crd7 oreo build.. and now I am having issues with my phone not connecting LTE to my Canadian carrier. I tried to refresh the Canadian firmware but get a Odin "Auth" error.. any ideas or ways to switch my carrier to glw (freedom mobile)

driehl1020 said:
I have a sm-n950u1 and live in canada and use freedom mobile.. I was running the 950w firmware and by mistake flashed the new 4crd7 oreo build.. and now I am having issues with my phone not connecting LTE to my Canadian carrier. I tried to refresh the Canadian firmware but get a Odin "Auth" error.. any ideas or ways to switch my carrier to glw (freedom mobile)
Click to expand...
Click to collapse
Did you check your apn settings?

Change CSC within multi-CSC

HI everyone,
I have a G970F/DS that has come with XSG firmware and I am trying to change the firmware to XSA
According to the image here https://forum.xda-developers.com/galaxy-s10/how-to/g973f-g973n-multi-csc-firmware-t3903050
For OXM multi CSC
SM-G970FXXU1ASAT-G970FOXM1ASAT
SM-G970FXXU1ASBA-G970FOXM1ASBA
The XSG is in the OXM multi CSC and XSA is in the single - I do not know what this means exactly.
I have tried
Using the *#272*IMEI# code with both IMEI codes, but i do not get a menu after typing it in
Flashing with new firmware from http://updato.com/ with Odin with the sim card in and out
Formatting the device using recovery mode with the sim in and also out+putting it in after
Using Odin to flash VD2 firmware and then back to the OXM firmware
When I flashed VD2 I got VD2/VD2,VD2/XSG in the software information but this went back to XSG/XSG ,XSG /XSG after flashing the OXM firmware
The sim card I am using is an Australian one from Optus and Odin is 3.13.1
Nothing seems to change to XSA.
Am I doing something wrong or is there something else I need to do?
Thanks

gazw68 said:
HI everyone,
I have a G970F/DS that has come with XSG firmware and I am trying to change the firmware to XSA
According to the image here https://forum.xda-developers.com/galaxy-s10/how-to/g973f-g973n-multi-csc-firmware-t3903050
For OXM multi CSC
SM-G970FXXU1ASAT-G970FOXM1ASAT
SM-G970FXXU1ASBA-G970FOXM1ASBA
The XSG is in the OXM multi CSC and XSA is in the single - I do not know what this means exactly.
I have tried
Using the *#272*IMEI# code with both IMEI codes, but i do not get a menu after typing it in
Flashing with new firmware from http://updato.com/ with Odin with the sim card in and out
Formatting the device using recovery mode with the sim in and also out+putting it in after
Using Odin to flash VD2 firmware and then back to the OXM firmware
When I flashed VD2 I got VD2/VD2,VD2/XSG in the software information but this went back to XSG/XSG ,XSG /XSG after flashing the OXM firmware
The sim card I am using is an Australian one from Optus and Odin is 3.13.1
Nothing seems to change to XSA.
Am I doing something wrong or is there something else I need to do?
Thanks
Click to expand...
Click to collapse
You can try inserting a Singapore SIM to see if it triggers Late Customization prompt to reset phone to XSP. 272 menu works in XSP

wire.rat said:
You can try inserting a Singapore SIM to see if it triggers Late Customization prompt to reset phone to XSP. 272 menu works in XSP
Click to expand...
Click to collapse
I don't have a Singapore Sim but I will see if I can get one to try with.
Do I need to reset the phone with the sim in or will the phone ask me when I put the sim in if I want to reset it?
Which IMEI is best to use with 272, does it make a difference?
Thanks for the suggestion

gazw68 said:
I don't have a Singapore Sim but I will see if I can get one to try with.
Do I need to reset the phone with the sim in or will the phone ask me when I put the sim in if I want to reset it?
Which IMEI is best to use with 272, does it make a difference?
Thanks for the suggestion
Click to expand...
Click to collapse
It should prompt you, but you can also try resetting in the recovery menu. I have always used IMEI 1 with 272

Worked for me!!!
gazw68 said:
HI everyone,
I have a G970F/DS that has come with XSG firmware and I am trying to change the firmware to XSA
According to the image here https://forum.xda-developers.com/galaxy-s10/how-to/g973f-g973n-multi-csc-firmware-t3903050
For OXM multi CSC
SM-G970FXXU1ASAT-G970FOXM1ASAT
SM-G970FXXU1ASBA-G970FOXM1ASBA
The XSG is in the OXM multi CSC and XSA is in the single - I do not know what this means exactly.
I have tried
Using the *#272*IMEI# code with both IMEI codes, but i do not get a menu after typing it in
Flashing with new firmware from http://updato.com/ with Odin with the sim card in and out
Formatting the device using recovery mode with the sim in and also out+putting it in after
Using Odin to flash VD2 firmware and then back to the OXM firmware
When I flashed VD2 I got VD2/VD2,VD2/XSG in the software information but this went back to XSG/XSG ,XSG /XSG after flashing the OXM firmware
The sim card I am using is an Australian one from Optus and Odin is 3.13.1
Nothing seems to change to XSA.
Am I doing something wrong or is there something else I need to do?
Thanks
Click to expand...
Click to collapse
WORKED PERFECTLY on my S10!!!
Changed CSC code from ZTO (Brazil retail) to ZVV (Vivo) after flash CHT firmware (from Chile).
I don't know why, but 4g+ from my operator (Oi - Brazil) doesn't work on ZTO -- br retail (it gets only 4g), but in CHT/ZVV it works 4g+ flawlessly!!! Despite Vivo's logo, I'm so happy!

rodrigoger said:
WORKED PERFECTLY on my S10!!!
Changed CSC code from ZTO (Brazil retail) to ZVV (Vivo) after flash CHT firmware (from Chile).
I don't know why, but 4g+ from my operator (Oi - Brazil) doesn't work on ZTO -- br retail (it gets only 4g), but in CHT/ZVV it works 4g+ flawlessly!!! Despite Vivo's logo, I'm so happy!
Click to expand...
Click to collapse
How?

Luke301 said:
How?
Click to expand...
Click to collapse
Once you flash a Multi-CSC and your active SIM is within the said list then it would restart and make the changes.
So if you want to move to a different CSC then just use a different SIM that has the specific you need.