Hey my 925 seems to run in qualcomm mode
while taking out usb plug than vol - and pwr than after vibrate i put cable in
And quickly Press vol + win 7 ask me for qualcomm device driver , i never flashed
It sińce it came from warehouse
The screen is black, right? if so, that's the Qualcomm bootloader, and your phone is in what is called QDL or Qualcomm Download mode. This mode allows you do update the PBL/SBL among other things.
How to get the Lumia 925 out of qualcomm mode? Is that possible somehow?
Related
Thing is such phone boot state after insert sim card mobile phone will restart, and then restart after didn't start up, brick directly. Press key combination has no reaction, no vibration, lead to can't into flash mode. Made it very clear don't remind I press the power button and up three times, it's no use. Electric lamp is not bright, charging for two days no response. Discharge also put two days also useless. Plugged into the computer usb prompt QHSUSB_DLOAD a driver, is a COM port driver, Qualcomm will be displayed after installed the HS - 9008 usb QDloader (com3) online to find a way a miflash brush is millet millet can be rescue come over, and QPST platform software can save, I have these software. But there is no brick save file,
Flashtool because cell phone can't connect computer so cannot be used. Don't and I said, press the volume down key, it's no use, have tried, have a LT28H commonly so SONY can solve the problem himself.
SO-O2E
ironguo said:
Thing is such phone boot state after insert sim card mobile phone will restart, and then restart after didn't start up, brick directly. Press key combination has no reaction, no vibration, lead to can't into flash mode. Made it very clear don't remind I press the power button and up three times, it's no use. Electric lamp is not bright, charging for two days no response. Discharge also put two days also useless. Plugged into the computer usb prompt QHSUSB_DLOAD a driver, is a COM port driver, Qualcomm will be displayed after installed the HS - 9008 usb QDloader (com3) online to find a way a miflash brush is millet millet can be rescue come over, and QPST platform software can save, I have these software. But there is no brick save file,
Flashtool because cell phone can't connect computer so cannot be used. Don't and I said, press the volume down key, it's no use, have tried, have a LT28H commonly so SONY can solve the problem himself.
SO-O2E
Click to expand...
Click to collapse
If its charging for 2 days and holding volume up and power button for a while doesnt work just send it back to sony.
Hi Everybody,
I have a HTC one m7_ul (rooted). Actually camera flash light was ON for almost 5 minutes, and after that the device went on BRICKED state. In normal OFF condition it shows a charge symbol, when it is connected to charge sorce and the red LED is ON. when i press ( POWER + Vol down), it shows up Bootloader mode but it hangs when i select any of the OPTIONS ( fastboot, factory reset, simlock etc ). when i press power button for long time, there appeas normal htc startup screen and screen goes OFF after 15 seconds. In this situation if it is connected to PC, then it detects the device as Qualcomm Download mode ( QDL ). I tried the process explained by our senior developer dexter93
but this couldnt detect the device.
Thanks...
Hi!
I have problem with power button its not working anymore its like button is stuck not going up or down anyomore.
Camera button works and volume buttons ...i stuck on recovery mode ..
Does anyone know how to boot phone up with windows (USB) Program adb?
Before i get phone to repair shop?
Thanks!
Let me guess - Lumia 720 (buttons in this model are... picky).
Just plug in your phone to power and it will turn on.
Hi Guys,
My HTC One M7 suddenly slowed down a bit yesterday. So generally i restart it and it works fine. So i did the same this time. But this time once it powered off it didn't start again. It was at 90% charge when i restarted it. Now when i put it on charge there is neither screen display nor the charging light glow red or green.
I have put it on charge for almost a day and still no response. I also tried a lot of things by now like holding down the power button for a minute or so / holding down the power button + vol down for a minute or so / power button + vol up for a minute or so. Even tried the power button + vol down near a bright light source. Nothing works till now.
Please help me out to figure out what is going wrong. Any help is deeply appreciated.
Dan9876 said:
Hi Guys,
My HTC One M7 suddenly slowed down a bit yesterday. So generally i restart it and it works fine. So i did the same this time. But this time once it powered off it didn't start again. It was at 90% charge when i restarted it. Now when i put it on charge there is neither screen display nor the charging light glow red or green.
I have put it on charge for almost a day and still no response. I also tried a lot of things by now like holding down the power button for a minute or so / holding down the power button + vol down for a minute or so / power button + vol up for a minute or so. Even tried the power button + vol down near a bright light source. Nothing works till now.
Please help me out to figure out what is going wrong. Any help is deeply appreciated.
Click to expand...
Click to collapse
Any sign of life when connected to a computer (look in Windows devices manager when connecting the phone)?
alray said:
Any sign of life when connected to a computer (look in Windows devices manager when connecting the phone)?
Click to expand...
Click to collapse
Thank you for the response.
Yes, when I connect to my computer it is listed under the section -
> Ports(COM & LPT)
Qualcomm HS-USB QDLoader 9008 (COM3)
Dan9876 said:
Thank you for the response.
Yes, when I connect to my computer it is listed under the section -
> Ports(COM & LPT)
Qualcomm HS-USB QDLoader 9008 (COM3)
Click to expand...
Click to collapse
Yeah that's what I thought, your phone went in QHSUSB mode and that is not good news. There are 2 known causes of the M7 going in QHSUSB mode:
1-You manually updated your firmware using an incomplete/partial firmware.zip (a firmware.zip not containing all the required .img files) and this caused incompatibility in the firmware. This can be solved using this method
2- You did nothing special before it happened, phone just went in this mode by itself = Hardware failure. Motherboard most likely need to be replaced, there is no "software" fix in this situation.
alray said:
Yeah that's what I thought, your phone went in QHSUSB mode and that is not good news. There are 2 known causes of the M7 going in QHSUSB mode:
1-You manually updated your firmware using an incomplete/partial firmware.zip (a firmware.zip not containing all the required .img files) and this caused incompatibility in the firmware. This can be solved using this method
2- You did nothing special before it happened, phone just went in this mode by itself = Hardware failure. Motherboard most likely need to be replaced, there is no "software" fix in this situation.
Click to expand...
Click to collapse
I think my case is the case-2. I just did a restart and it happened. Seems like hardware failure. This sounds like an expensive fix for an old phone
Its the second time that phone shutsdown to qdloader mode
First was in charge and i press power key doesnt do any thing and i hold it and it powers on
Second time i uninstall chrome and it hangs force reboot by pressing power button but doesnt restart
Connect it to pc and qdloader device apears
Holding two volume down and power key toghether and it goes to fastboot
Is anyone experienced this ? I think xiaomi used low quallity Emmc of Macron brand
Befor this inhave A1 that uses samsung chip