Is there a possibility to lower the mic level to record louder sounds (music)? Is there an app in play store for this purpose?
Found in todays (08.04) changes of milaqs cm11 something like "audio: enable remote submix"...is that a method to control audio input ("AUDIO_DEVICE_IN_REMOTE_SUBMIX")? Can I use alsa to control it?
ranjib said:
Found in todays (08.04) changes of milaqs cm11 something like "audio: enable remote submix"...is that a method to control audio input ("AUDIO_DEVICE_IN_REMOTE_SUBMIX")? Can I use alsa to control it?
Click to expand...
Click to collapse
No, it relates to Chromecast.
Related
Is anybodu also using Faux Sound control?
Up to now I did not have problems with it but now I try to use it for
changing the left-right balance on the headphone speakers.
When using VLC or the built-in music player ypu do not seem to
have control over the balance, I know some other aps like Poweramp
do have this control but I do not like to add another app.
So then I remembered I'm already using the Faux sound control app.
Up to now I was using it for setting up a silent, loud or quality profile.
But with the custom profile you can change all the settings yourself.
So first of all I tried to change the analog g ain controls because I'm using the headphones with the audio jack but this did not help.
So then I changed the Digital gain controls, but when lowering the left or the right channel the result was that both of them went to the lowest volume.
In the sound control app they had a separate setting but in real life they took the lowest of both volumes.
I know I should ask this on Paul Reioux the creator of the app but I cannot find his email or support for his apps.
5-16-21: Finally updated both apps to use custom on-screen dialog instead of stock alert boxes, ported from my Quick Tiles app (USB Audio 4.1 and USBHost only)
I've managed to find a combination of versions of Tasker and App Factory that run on my Nook Tablet and generate apps from Tasker tasks that will run on the Nook Simple Touch (Glowlight too, I assume).
Attached are stand-alone (no Tasker required!) app versions of the USB Audio and generic USB Host toggles. More skittish devices may not work with these, but you might want to give them a try anyway.
Root and SuperUser required. You also need a kernal that supports USB Host.
These apps--and all Tasker-generated apps--have a dependency on two library files normally installed with GApps. If you do not have GApps installed on your device, you can still use these apps by copying the two attached files into the locations shown below (the xml file is zipped so you can download it rather than view it):
/system/etc/permissions/com.google.android.maps.xml
/system/framework/com.google.android.maps.jar
Set permissions for both files to rw-r--r-- and reboot.
New version 4 of USB Audio Toggle with onscreen volume controls
I have two USB-C audio devices. My original has no LEDs and no volume buttons. The second has both. I prefer the original (why waste battery power on LEDs?). That means I have sacrificed two hardware buttons as volume controls, using NTMM to assign the functions. But most of the time I don't need those buttons to control volume.
Now I don't need to tie up two buttons and neither do you. Version 4 (below) of the USB Audio toggle app places a pair of volume control buttons on the mid-right edge of your screen that persists until you exit USB Audio mode (works in Portrait or Landscape). Then they just disappear! (screenshot with TuneIn Radio below)
There are no other changes to Version 3, so if you don't need the buttons, you don't need version 4.
In order for the Android audio volume control to function as intended, you need to have Phone.apk in /system/app.
Version 4 can be installed over version 3. Enjoy!
Updated USB Audio toggle app
Version 3 of the app uses the exact same method for killing mediaserver as @Renate NST does in her AudioCtl app (but no beeps). The method used in previous versions was not compatible with the android volume control described in this thread.
i know this thread may be a little older but does this allow to have the original android volume control, control the usb audio output volume?
i have an android Headunit that ill be wanting to send digital audio via usb to a DSP processor via usb. to retain my steering wheel volume control i need the normal android volume control to control the usb audio output.
Is this a fix to what i am looking for?? Android 6.0
guimond47 said:
i know this thread may be a little older but does this allow to have the original android volume control, control the usb audio output volume?
i have an android Headunit that ill be wanting to send digital audio via usb to a DSP processor via usb. to retain my steering wheel volume control i need the normal android volume control to control the usb audio output.
Is this a fix to what i am looking for?? Android 6.0
Click to expand...
Click to collapse
If I understand your situation correctly, the answer is "no". This pair of apps is tailored only for the NST e-reader with USB Host kernal modifications. In this case, normal Android volume control functions via the Phone apk to control system volume of the USB audio gizmo. But this is a very narrow application, and I doubt the app would even run on a Marshmallow ROM.
ALRIGht is there any possible way to get the usb audio output volume control enabled ?
guimond47 said:
ALRIGht is there any possible way to get the usb audio output volume control enabled ?
Click to expand...
Click to collapse
I'm afraid I'm pretty clueless with a different system. I have one device running CM 13 (Marshmallow, Android 6.0) and in Settings>Developers Options there is a place to "Disable USB Audio routing", but I don't know whether that is at all related to your situation.
Google may be your friend. It's usually how I find out things.
USB Audio toggle with onscreen volume controls!
I'm pleased to have learned how to do this! Details in the first post.
It will be nice to having dolby digital pluse/atmos
We need devs to port dolby digital for our rom(cm11)
What do think guyzz???
there's viper, why you need dolby? just asking
Bcz it is advance
Follow this thread for viper4android in cm11, its all in one, you just have to know how to use it.
http://forum.xda-developers.com/nokia-x2/general/flashable-viper4android-v2-3-4-0-cm11-t3225284
not all features were used, on my case i used only EQ and fidelity control on headset. sometimes i use playback gain control for louder volume
I used it,,,,and it will delete androids native eq
No other 3rd party app can play theirs own eq system except v4a
SRC about dolby
Its done!!!!
http://forum.xda-developers.com/nokia-x2/development/mod-dolby-digital-plus-nokia-x2-cm11-t3248174
Ported by:kaotd99
As i see many people flashing the old oreo stuff from Whiskey on AOSP which result in many bug, i decided to make a module to enable dual speaker mod, pseudo-HIM mode, and Gcam - stereo recording mod on AOSP
Feature:
+ pseudo-HIM mode, should make sound better and DAC toggle work
+ Stereo recording
+ Dual speaker - no mic breaking
+ I still attach the Poweramp 24 bit mod in attached file
Note:
+ Not working with ainur or narsil or any mixer path editing mod
+ Can work together with the Poweramp 24 bit mod attached
+ May have some unknown bug, report if you have any
For old OP:
Hello everyone
After a bit of work, me and @legacyeah manage to bring the great Legacy Audio Mod by @Rizal Lovins, in the form of a Magisk Module for quick installing and removing. We also manged to fix some bug found in the original audio mod.
Features:
* 24 bit output on poweramp
* enable 384 khz resampling
* Working audio recording in video
*Based on and improve upon Rizal Lovins Legacy Audio Mod on XDA[/COLOR][/COLOR]
Notes: DVC in poweramp is bugged so DVC only work with 192, 96,48,44.1 khz resampling rate. Other resampling rate will need DVC disabled
*IMO sound quality is better compare to stock pie, it feel the same as stock LG sound quality*
Confirmed working on Havoc 0402 + Ainur with no other Audio mod or AML , other rom and compatibility with other audio mod need more tester
How to install:
1. On an AOSP Pie rom
2. Have Magisk working (if you dont know what magisk is and how to install it, search Google)
3. Flash the provided zip through TWRP or Magisk manager (Magisk manager may has bugs causing the zip not flashable)
4. Reboot
5. Enjoy ! (Music player may need further setting for 24 bit output)
Note 2: If you find any bug, please feel free to report but please remember if you use this mod with other sound mod (like Viper 4 Android, DTS..) the bug will be noted but no promise for it to be fixed
Credit goes to:
@legacyeah for mic recording bug fix
@Rizal Lovins for the original mod
@SGCMarkus for providing AOSP for our device
And all the testers on telegram group
Update:
*18/2/19: add mod option to force enable HIM ( will cause sound distortion on normal headphone- dont complain)
*23/2/19: 24 bit mod HIM is now a separate module, you can install both module and enable one of your choice
*10/3/19: add 24 bit mod Dual speaker mod. Courtesy of @Dante63. Also cleaning up unnecessary file.
*6/4/19: With new device tree, AOSP now have working 24 bit output by default and HIM mode as well as DAC filter and sound preset working (with Ainur), those mod are depreciated. However, PowerAmp still need a mod to enable 24 bit output. Hence thread is updated with the necessary mod
*3/7/19: Add Pseudo HIM mod, dualspeaker mod, stereo recording.
I noticed that when i take any video from my device after installing this that voice is so much low when i play these videos on my device
Ziad Ajam said:
I noticed that when i take any video from my device after installing this that voice is so much low when i play these videos on my device
Click to expand...
Click to collapse
Low volume on video recording has been mentioned quite a long time on AOSP Pie. Are you sure it happend after flashing this mod. if so please specify: which rom, which camera app and which sound mod did you use?
Thanks man it works well with my v300s stock rom . thumbs up
Mrxyzl said:
Low volume on video recording has been mentioned quite a long time on AOSP Pie. Are you sure it happend after flashing this mod. if so please specify: which rom, which camera app and which sound mod did you use?
Click to expand...
Click to collapse
Actually audio recording was off when i use Gcam but was working well in other apps like snapchat and instagram. Now it works in every app but the recording voice is so weak.
---------- Post added at 06:31 PM ---------- Previous post was at 06:30 PM ----------
Ziad Ajam said:
Actually audio recording was off when i use Gcam but was working well in other apps like snapchat and instagram. Now it works in every app but the recording voice is so weak.
Click to expand...
Click to collapse
Android Pie Lineage OS 16
Ziad Ajam said:
Actually audio recording was off when i use Gcam but was working well in other apps like snapchat and instagram. Now it works in every app but the recording voice is so weak.
---------- Post added at 06:31 PM ---------- Previous post was at 06:30 PM ----------
Android Pie Lineage OS 16
Click to expand...
Click to collapse
So now all apps are having low volume recording or only the Gcam?
I wonder why this would happen because AOSP had low volume recording issue before.
Sent from my LG-H930DS using Tapatalk
Thread update with normal, high impedance mode and dual speaker mode
Working Very perfect in my LG US998 With pie DotOs and Dolby Digital Plus Mod.
No problems work good
So the dual speaker version has working mic?
Also, can you make a dual speaker+him version?
mark20120 said:
So the dual speaker version has working mic?
Also, can you make a dual speaker+him version?
Click to expand...
Click to collapse
I don't see why dual speaker don't have a working Mic.
I'll make one this weekend
It Works!
Mrxyzl, thank you very much. Speaker mod works fine. It would be great if you create a stereo mic mod for PIE camera. It's the only thing I miss in custom PIE roms. Thanks again
Stereo mod with HIM would be perfect.
Thread updated according to changes in new device tree. Add 24 bit mod enable for PowerAmp (only for those who use PowerAMP) other player like neutron and UAPP no need this mod
Mod no longer works after Poweramp v3 build 829 update. Running onHavoc os 2.5 may 20th update for LG V30 H930
Klimon5 said:
Mod no longer works after Poweramp v3 build 829 update. Running onHavoc os 2.5 may 20th update for LG V30 H930
Click to expand...
Click to collapse
thanks. i'll see what i can do this weekend
Edit: something is wrong on your side. mine work perfectly, btw need to enable DVC in order for 24 bit to work
Mrxyzl said:
thanks. i'll see what i can do this weekend
Edit: something is wrong on your side. mine work perfectly, btw need to enable DVC in order for 24 bit to work
Click to expand...
Click to collapse
I fiddled around with some settings. I fixed it. I have been using the 384kHz option with DVC disabled which works but sometimes I end up with the song skipping. I switched it to 192kHz with DVC enabled and that seems to resolve any issues I have. Why are the higher kHz options available if they don't work well or at all? Is it related to the way this mod is set up or how Poweramp is setup?
Klimon5 said:
I fiddled around with some settings. I fixed it. I have been using the 384kHz option with DVC disabled which works but sometimes I end up with the song skipping. I switched it to 192kHz with DVC enabled and that seems to resolve any issues I have. Why are the higher kHz options available if they don't work well or at all? Is it related to the way this mod is set up or how Poweramp is setup?
Click to expand...
Click to collapse
From my experience on stock, 384KHz drops it to 16bit and stops DTS from working.
Sent from my LG-H932 using XDA Labs
Found a way to make GCam record stereo audio
SDevil454000 said:
Found a way to make GCam record stereo audio
Click to expand...
Click to collapse
Much appreciated
Mrxyzl said:
Much appreciated
Click to expand...
Click to collapse
Updated stereo. Sound recording is louder and better quality.
Yo there.
Brief summary
My previous device was a Mi A1 which packed some punch on its audio jack output. It could go LOUUUUD. Obviously I found X3's sound very lacking in that regard but very good in other audio aspects. Upon inspecting MIUI's mixer_paths, I found out that qualcomm's codec ULP mode (ultra low power) is used by default when you plug in some headphones. AFAIK this mode disables the codec's dedicated headphone amplifier (or something close to it, didn't really investigate further after getting the results I wanted lol). But no. We don't want this.
Sooo?
This module will increase/boost your jack**** 3.5mm volume levels. It does this by enabling the HIFI mode provided by the SoC's codec and disabling its compander module. It also tunes both the analog and digital values to more optimal levels.
Why not just increase RX_blablablabla?
Becaaause, with that method you increase digital gain only, which introduces distortion and similar artifacts. We don't want that. Before increasing the digital gain as high as possible, we need to do it with the analog gain first. The module does this for you, using values based off my testing.
If you want to go louder still, edit the mixer_paths_wcd9375 file present inside the module zip and increase the RX Digital Volume values of the headphones-ce section. If you're using AML do the same on the .aml.sh file (it is 83 by default).
What about HPHR/L?
It is already maxed out by default (20) and doesn't work unless you disable qualcomms compander. This module disables the compander and actually reduces it to 19 just to be on the safe side. If you want to go higher still follow the same steps presented above.
Why LOHIFI and not HIFI?
From my testing, there's no difference between those two and I'll always favor the mode which is more battery friendly.
Compatibility
Should work with any audio mod out there as long as you use AML.
Can also be used standalone.
It has only been tested on the lastest Xiaomi.EU build but should work in any MIUI based ROMs and most likely AOSP ROMs too (didn't test yet but it SHOULD work).
If you want to be 100% sure it works on your ROM (AOSP or not) install AML and Ainur NARSIL. I'll also leave my narsil_useroptions if you're interested.
Interesting, but isn't Ainur Narsil module doing the same thing? Like removing compander for example?
Also, doesn't Ainur edit mixer_paths too for higher volume?
@SkaboXD Ainur doesn't adjust the volumes but yeah, you can use it to disable the headphones compander module as well (although I'm not sure if that actually works). AFAIK.
theres 2 zip which one should i flash? im on eu, no other audio mod installed.
nvm. im just stupid
its magisk module ?
zainnasai said:
its magisk module ?
Click to expand...
Click to collapse
It is, checkout the description.
_Yank said:
It is, checkout the description.
Click to expand...
Click to collapse
thanks bro
at least mention AML as Audio Modification Library (magisk module) once I totally had to think hard what it was. Also you made it sound with Ainur Narsil you can test it, not that it should 100% work with it and AML.
also looking at your narsil_useroptions, the value for impendance is wrong? it should be 48000 instead of just 48 for 48ohm
thanks tho, much appreciated.
_Yank said:
It is, checkout the description.
Click to expand...
Click to collapse
Where you can edit the volume of the Bluetooth ?