[Q] Debrand I-9305 with T-Mob NL Software - Galaxy S III I9305 (4G LTE + 2GB RAM) Q&A, Help &

I now have a I-9305 with T-Mobile Software on it, but I like to flash the original S3 I9305 Firmware (I9305XXBME1_I9305PHNBME2_PHN) on it to get rid of the bloatware. Is this possible? I've downloaded the firmware but I am, probably due to KNOX, unable to flash this firmware and it gives me a NAND Write error. Flashing the original firmware goes fine.
I'm not new to Android, but I'm unfamiliar with Samsung S3 devices. I know tools like Odin, Recovery and Download-mode.
Thanks!

Bump... Any clue how I can get generic software on this baby ?!

Simply flash via Odin, should work. But why BME2, when you have much newer 4.3 firmwares?
Sent from my GT-I9305 using XDA Free mobile app

basvanasperdt said:
Simply flash via Odin, should work. But why BME2, when you have much newer 4.3 firmwares?
Sent from my GT-I9305 using XDA Free mobile app
Click to expand...
Click to collapse
I have tried flashing through ODIN, but Knox Bootloader prevents me to do so. I have downloaded this firmware from Sammobile. The 4.1.2 version from TNL flashes normally, so I think that the bootloader prevents me to flash a generic Firmware.
Where can I download the newest Firmware for i-9305 for the Netherlands (I don't want a foreign Firmware, just the NL Firmware)?

JassyNL said:
I have tried flashing through ODIN, but Knox Bootloader prevents me to do so. I have downloaded this firmware from Sammobile. The 4.1.2 version from TNL flashes normally, so I think that the bootloader prevents me to flash a generic Firmware.
Where can I download the newest Firmware for i-9305 for the Netherlands (I don't want a foreign Firmware, just the NL Firmware)?
Click to expand...
Click to collapse
You sure? Sounds weird cause as far as I know, KNOX was only introduced for our phone since android 4.3
And even if you have the new bootloader with KNOX, it shouldn't be a problem in my opinion. I have the new bootloader as well and flashing, via Odin and recovery, isn't a problem at all.
You can download any 4.3 version you want, this won't afact your phone at all and your language will remain Dutch
Sent from my GT-I9305 using XDA Free mobile app

JassyNL said:
I have tried flashing through ODIN, but Knox Bootloader prevents me to do so. I have downloaded this firmware from Sammobile. The 4.1.2 version from TNL flashes normally, so I think that the bootloader prevents me to flash a generic Firmware.
Where can I download the newest Firmware for i-9305 for the Netherlands (I don't want a foreign Firmware, just the NL Firmware)?
Click to expand...
Click to collapse
Hee man,
Op Sammobile zou ik als ik jou was de nieuwste duitse 4.3 firmware downloaden (je kan alsnog alles in het nederlands doen) als je stock rom wil tenminste. Hoezo wil je geen custom rom eigenlijk?

Thanks guys!
I've now flashed the original NL Firmware. Mobile ODIN has done the trick! With Odin under Windows, I get a failure at once, but with Mobile Odin, everything is fine. Now I have the original 4.3 PHN Firmware flashed on this device, exactly as I want. This Phone is only a spare one and should be as original as possible.
Thanks for your support!

Related

[Q] Kies branded my unbranded Phone

Hi,
Last week, I bought an unbranded Galaxy S on a well known French Site. The phone was unbranded.
I installed the Kies software, and when I plugged my phone Kies told me I could update the firmware. I updated the firmware, and when I restarted the phone, it was not in french anymore, but the language was set to portugese, and my phone was branded for the TMN operator in Portugal.
I'm still able to use my phone with my sim card from belgium, but my phone is full with undesired logos and apps.
I've seen that it's possible to reflash an offficial ROM in the phone, but my version of Kies won't let me do this anymore.
I'd like to update to the latest unbranded French/belgian/The nertherlands version.
Is this still possible? I've found some ProductCode, but I was unable to find a corresponding HIDSWVER.
Thanks!
Xav
xav2 said:
Hi,
Last week, I bought an unbranded Galaxy S on a well known French Site. The phone was unbranded.
I installed the Kies software, and when I plugged my phone Kies told me I could update the firmware. I updated the firmware, and when I restarted the phone, it was not in french anymore, but the language was set to portugese, and my phone was branded for the TMN operator in Portugal.
I'm still able to use my phone with my sim card from belgium, but my phone is full with undesired logos and apps.
I've seen that it's possible to reflash an offficial ROM in the phone, but my version of Kies won't let me do this anymore.
I'd like to update to the latest unbranded French/belgian/The nertherlands version.
Is this still possible? I've found some ProductCode, but I was unable to find a corresponding HIDSWVER.
Thanks!
Xav
Click to expand...
Click to collapse
Hmmm... Sonuds to me like whoever you bought it from had flashed it so that it wiuld seem like it was unbranded but in reality it was a TMN device all along.
I believe that if you have upgraded your kies version to the _100 version then the registry trick will no longer work so you would have to flash it with odin.
If anyone else can chime in or if im wrong then please correct me.
Sent from my GT-I9000M using XDA App
I doubt someone flashed it as i had an original brand new unopened box. It was certainly not second hand.
Sent from my GT-I9000 using XDA App
W
xav2 said:
I doubt someone flashed it as i had an original brand new unopened box. It was certainly not second hand.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Well its awfully odd that after flashing to the official froyo firmware on kies that it would just all of a sudden become branded.
Think about this... People use odin and even rhe reghack on kies to upgrade to "unbranded" firmware so it would only make sense that if you flashed using kies official firmware that it would revert the device to its original and branded status.
Sent from my GT-I9000M using XDA App
Unfortunately, that is possible We got many such a reports about phones bought in Polish markets, see http://forum.xda-developers.com/showpost.php?p=8927826&postcount=92
Is Poland some phones were debranded and re-selled by mobile operators to markets. Unfortunately phones didn't get clean ProductCode and that way Kies updated firmware using version for original mobile network operator.
What about downgrading Kies and then doing the reg hack to reflect an unbranded earlier version of the firmware for your region and flashing through Kies again??
Same happened to me, bought the international version at handtec.co.uk, got the phone shipped to Mexico, and first upgrade I did on KIES installed a TMN branded firmware.
I didn't like the branded firmware, specially with all that SAPO apps, I rooted phone, installed titanium backup and deleted all apps, now only problem I have is a dancing "t" character showing on startup and shutdown.
Haven't found the reason for this, or the way to change to a unbranded UK firmware.
PhoenixFx said:
What about downgrading Kies and then doing the reg hack to reflect an unbranded earlier version of the firmware for your region and flashing through Kies again??
Click to expand...
Click to collapse
This should work. Check the codes for your country either that or reflash it with odin
xav2 said:
Hi,
Last week, I bought an unbranded Galaxy S on a well known French Site. The phone was unbranded.
I installed the Kies software, and when I plugged my phone Kies told me I could update the firmware. I updated the firmware, and when I restarted the phone, it was not in french anymore, but the language was set to portugese, and my phone was branded for the TMN operator in Portugal.
I'm still able to use my phone with my sim card from belgium, but my phone is full with undesired logos and apps.
I've seen that it's possible to reflash an offficial ROM in the phone, but my version of Kies won't let me do this anymore.
I'd like to update to the latest unbranded French/belgian/The nertherlands version.
Is this still possible? I've found some ProductCode, but I was unable to find a corresponding HIDSWVER.
Thanks!
Xav
Click to expand...
Click to collapse
The solution is written almost in every thread on this forum in last 4-5 days:
You have to downgrade to the older version of Kies, then make changes in the registry:
[HKEY_CURRENT_USER\Software\Samsung\Kies\DeviceDB\4]
"SoftwareRevision"="I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3"
"ProductCode"="GT-I9000HKDXEU"
"HIDSWVER"=""
"DEVCONINFO"=""
[HKEY_CURRENT_USER\Software\Samsung\Kies\]
"LocalVer"="1.5.3.10103.100"
Then you should be offered to upgrade to unbranded JPO for UK

Looking for Singapore Region LTE version of .423 or .244 Tft file....

Hi,
I am from Singapore, i m looking for Singapore region tft to re flash into my XZ.
During .423 update, i have flashed a Spain's region rom due to rooting issue... ever since, i m on Spain region even i tried to update or repair my phone from PCC...
Is there anyway or place that i can download Singapore tft file???
Sent from my ME371MG using xda premium
Flashben said:
Hi,
I am from Singapore, i m looking for Singapore region tft to re flash into my XZ.
During .423 update, i have flashed a Spain's region rom due to rooting issue... ever since, i m on Spain region even i tried to update or repair my phone from PCC...
Is there anyway or place that i can download Singapore tft file???
Sent from my ME371MG using xda premium
Click to expand...
Click to collapse
Two ways to do it.
Either you can flash an old version of Singapore firmware and then upgrade it to the latest via PCC or SUS
Or
Root you existing firmware and use the Singapore SI number and then do a repair in the PCC or SUS
Please note that both ways will make you loose your data. So backup before proceeding.
Alternatively, find an Singapore FTF and flash it over your existing version. That should keep your data and settings in tact.
LiveSquare said:
Two ways to do it.
Either you can flash an old version of Singapore firmware and then upgrade it to the latest via PCC or SUS
Or
Root you existing firmware and use the Singapore SI number and then do a repair in the PCC or SUS
Please note that both ways will make you loose your data. So backup before proceeding.
Alternatively, find an Singapore FTF and flash it over your existing version. That should keep your data and settings in tact.
Click to expand...
Click to collapse
I manage to change the Singapore SI in bulid.proc so i plan to update or repair the phone using PCC in the next version lolx ... I already backup my stuff..
Thanks for the advice.

Galaxy Note 4 SM-N910T 4.4 - Can I Flash 910F ROM?

Flash N910T with F910F ROM
Hello guys, I need your help. I got as I thought SM-N910F brand new in Russia with 4.4 KK. It worked fine except for being weak to work with 3G. 4G was OK. Russian localization was OK. When I tried to update the ROM, I discovered this device is not 910F but unlocked 910t instead. While experimenting with flash, I damaged efs. Then I restored it with Kies flashing stock ROM. So now I'be got lollipop phone which says "insert T-mobile SIM".
SI my idea is to flash it with some European ROM which support Russian language. Possibly, some 910f mod? Can somebody suggest which ROM to flash? Unfortunately, I didn't backup original ROM.
re: N910F
dmmos said:
Hello guys, I need your help. I got as I thought SM-N910F brand new in Russia with 4.4 KK. It worked fine except for being weak to work with 3G. 4G was OK. Russian localization was OK. When I tried to update the ROM, I discovered this device is not 910F but unlocked 910t instead. While experimenting with flash, I damaged efs. Then I restored it with Kies flashing stock ROM. So now I'be got lollipop phone which says "insert T-mobile SIM".
SI my idea is to flash it with some European ROM which support Russian language. Possibly, some 910f mod? Can somebody suggest which ROM to flash? Unfortunately, I didn't backup original ROM.
Click to expand...
Click to collapse
You cannot flash a N910T phone with a N910F custom or stock twrp flashable zip file rom.
What you need to do now is to find, download and ODIN flash the official firmware which
came with your phone in order to get your phone working properly again.
Sorry about that,
Have a great day!
Misterjunky said:
What you need to do now is to find, download and ODIN flash the official firmware which
came with your phone in order to get your phone working properly again.
Click to expand...
Click to collapse
Thank you, Misterjunky. There is no such a thing as "official firmware" for my phone. Because it was brought to Russia and unlocked unofficially as I can see now. They even changed the phone label on the back side. So they flash some custom firmware, I think so but I have no idea which one.
To put it more clear, what i have now is exactly official firmware. I've got it with Samsung Kies Tools - Firmware upgrade and initialization which downloads the official firmware based on model name and serial number. But unfortunately this is not what I need because it doesn't accept my local SIM
BoBCaTROM by @turilo worked for my device:
http://forum.xda-developers.com/not...cial-bobcatromn910fton910tw8-v2-0nk5-t2992648
But the problem with 3G persists. Device works with 2G and 4G without problem, but doesn't work with 3G. Any ideas how to adapt modem from 910C to this model?

S4 active need to upgrade to 5.0.1

hello...
please give me some help..
I am beginner on android, flashing and so on...
I have an S4 active, with 4.4.2 with Baseband version "I9295XXUCNI1".
I want to install the 5.0.1 version, but on sammobile, the only version available for "I9295XXUCNI1" is 4.4.2.
There is 5.0.1 available with PDA I9295XXUDOD3 and CSC I9295XXUDOD1..
Is it safe to install that room?
gabrielstroe said:
hello...
please give me some help..
I am beginner on android, flashing and so on...
I have an S4 active, with 4.4.2 with Baseband version "I9295XXUCNI1".
I want to install the 5.0.1 version, but on sammobile, the only version available for "I9295XXUCNI1" is 4.4.2.
There is 5.0.1 available with PDA I9295XXUDOD3 and CSC I9295XXUDOD1..
Is it safe to install that room?
Click to expand...
Click to collapse
Yes, you can install nearly any of the firmwares from the sammobile site. If you're asking which firmware would be the best to flash to your device, it depends where you are located. The NI1 firmware is available for several different countries, so I would flash the firmware for your region, it should be optimized to best work on your networks.
update: I installed the DOD3... it worked!!
gabrielstroe said:
update: I installed the DOD3... it worked!!
Click to expand...
Click to collapse
another question.... my cousin have S4 i9505, with 4.4.2, root-ed....
Do I have to unroot it first or I can install the new official firmware over it?
I have downloaded the 5.0.1 firmware....
gabrielstroe said:
another question.... my cousin have S4 i9505, with 4.4.2, root-ed....
Do I have to unroot it first or I can install the new official firmware over it?
I have downloaded the 5.0.1 firmware....
Click to expand...
Click to collapse
When you flash the firmware through Odin it will completely wipe the device, it doesn't matter if you're rooted or not.
thank you
but what if the S4 is locked to orange carrier?
The firmware I have downloaded is carrier free...
is there any problem?
I am afraid of bricking the phone.... I understood the root will not be a problem, but I am afraid of the lock carrier.... the baseband is not the same as the one installed on the phone now

For the love of god, why can I not flash T-Mobiles firmware in patched Odin? It fails

I'm not new around here, and I've used Odin many times, but I am trying to flash the T-Mobile firmware on my S10 and it fails EVERY DANG TIME!!!!!!!!! I have all the file selected, and again it's the patched Odin, I just do not understand. PLEASE, help me. Image is attached.
Please for the love of god someone help I will paypal someone 20 dollars if they can help me figure out why it always fails.
I am currently downgrading from Beta 7 to Pie 9 BSIV as we speak on my Sprint S10 using ODIN 3.13.1. Did you download the software using Frija? I am also on a Sprint phone flashing Sprint firmware, is the phone you have originally from T Mobile? If you didn't download the firmware using Frija I would re download it using that and try it.
Poppawu696 said:
I am currently downgrading from Beta 7 to Pie 9 BSIV as we speak on my Sprint S10 using ODIN 3.13.1. Did you download the software using Frija? I am also on a Sprint phone flashing Sprint firmware, is the phone you have originally from T Mobile? If you didn't download the firmware using Frija I would re download it using that and try it.
Click to expand...
Click to collapse
No I found the firmware on here. Everytime I put the corresponding fields in Odin, it always fails, and I don't understand why.
C-4Nati said:
No I found the firmware on here. Everytime I put the corresponding fields in Odin, it always fails, and I don't understand why.
Click to expand...
Click to collapse
Download most recent firmware using frija. I bet the one you trying to flash is older than what the phone is currently on. You can't flash older firmware no matter what even if using patched Odin.
abl.efl is bootloader, it is normal to fail at bootloader, cause that bootloader is older than the actually one you do have.
You either have to remove bootloader from firmware (if you can), or flash another firmware with the same - or higher bootloader.
Why don't you use stock Odin?

Categories

Resources