Related
I just got my HTC One for AT&T two weeks ago,
rooted and installed the following
-TWRP
-SuperSU
-bulletproof Kernel/ROM
Whenever I start the camera application, the whole screen is black and the on screen buttons are greyed out.
I've tried to install a stock boot.img and reinstall the Bulletproof Kernel and the same happens.
I've tried the solutions listed on the thread to delete 3 specific files in the zip with no avail. The latest version, 1.10 is supposed to address the camera issue with a camera fix, but I tried it and its still the same.
Reference threads:
Guide I used: http://forum.xda-developers.com/showthread.php?t=2273376
Bulletproof thread: http://forum.xda-developers.com/showthread.php?t=2233665
Can anyone help please?
You're on the stock ROM?
If so, you don't need the camera fix, you need the original files. If you have a backup, restore /system and you should be good to go.
flar2 said:
You're on the stock ROM?
If so, you don't need the camera fix, you need the original files. If you have a backup, restore /system and you should be good to go.
Click to expand...
Click to collapse
Don't have a backup, and when I'm on the stock ROM, it says "Unable to start the camera" and when I'm on Bulletproof Kernal, the camera is all blacked.
Isn't the original files the stock boot.img?
P.S. Sorry, new to this.
Try using a different kernal it might fix the problem, worked for me.
adz3d said:
Try using a different kernal it might fix the problem, worked for me.
Click to expand...
Click to collapse
I can't put my kernel inside my HTC One's storage because it says Cannot copy item. The device has either stopped responding or has been disconnected. I just factory resetted and the camera problem is still present.
Bulletproof on 4.1.2 camera issue!!!!
i am running into this exact same issue, black camera screen of death
i've tried installing all bulletproof kernals from 1.0 to 2.1
(compatable with my AT&T, android 4.1.2, sense 5)
HAS ANYONE BEEN ABLE TO SUCCESSFULLY INSTALL THIS BULLETPROOF
KERNAL ON AT&T, android 4.1..2
???
if you have, please help.
which version of the kernel did you install?
what settings did you use?
maybe i'm doing something wrong, i'm somewhat new to rooting,
before i install a "new" kernel, do i have to do anything so that it overwrites the previous properly?
thanks
AJ
As Flar2 said you don't need the camera fix on stock, reflash Bulletproof and uncheck the option to apply the camera fix.
Ok, thanks, i will give it a shot.
Noob question, if im reflashing a kernel,
(Using TRWP)
Do i have to do anything special? Or will these kernels automatically overwrite?
Thanks!
Sent from my HTC One using xda premium
black screen camera issue
Hey can someone help me fix this please.
I got my HTC one phone and I
Unlocked the bootloader
Rooted
Installed supersu
And a kernel elementalx
There's something with the camera after I did the installation later
For like a few hrs and when I opened the camera app
To check everythine if it's ok. And I got this issue. A black screen on my camera when I open it
I don't know what to do next. Please help me is there a way to fix.
I can only think of unrooting my HTC one. But I don't know it will work.
But please developers help. It's not nice to just leave someone for ex. In a desert struggling.
Please help me. And help the other people who have this problem.
superdev151 said:
Hey can someone help me fix this please.
I got my HTC one phone and I
Unlocked the bootloader
Rooted
Installed supersu
And a kernel elementalx
There's something with the camera after I did the installation later
For like a few hrs and when I opened the camera app
To check everythine if it's ok. And I got this issue. A black screen on my camera when I open it
I don't know what to do next. Please help me is there a way to fix.
I can only think of unrooting my HTC one. But I don't know it will work.
But please developers help. It's not nice to just leave someone for ex. In a desert struggling.
Please help me. And help the other people who have this problem.
Click to expand...
Click to collapse
Dont panic, i cant say for sure, but all i did to resolve my black camera issue (ran into same problem myself aftr i installed the bulletproof kernal on stock rom) ...was i installed the Android Revolution HD ROM (FOR HTC ONE) and all my troubles were resolved!
U can find it here on XDA forums
Sent from my HTC One using XDA Premium 4 mobile app
Hey I got your message and what version of android are u on. I'm on 4.1.2. Is that compatible to download with it(android evolution hd) rom. Or there's a 4.1.2 version for HTC one android evolution hd Rom. Thanks for suggestion.
Sent from my HTC One using xda premium
I was originally 4.1.2 also...when i unlocked boot & rooted my phone. Then i installed the android revolution HD which is basically 4.2,...worked like a charm aftr i installed. Are u using TRWP? Make sure u run a backup prior (just in case) but i have had zero problems with android rev. hd
Sent from my HTC One using XDA Premium 4 mobile app
Hi Folks,
I wanted to post this in the TeamSense thread (http://forum.xda-developers.com/showthread.php?t=2255160), but being a new member it won't let me...
I live in New Zealand and have a HTC One locked to the Vodafone NZ Network. Its running the stock kernel + ROM, but it has been rooted.
Basically I've got a couple of issues with the phone stock:
- The OTG support is very hit and miss. I have a USB Telemetry receiver/transmitter for my Remote Control APM quadcopter,
this should connect to the apps Droidplanner or Andropiolot, but when I connect the stick to the phone with an OTG cable I get the error unsupported device. Same problem with my Nikon DSLR and a bunch of other devices that should work. Note: Keyboard, Bluetooth mice etc work fine....so the connection is there!
- I also have a Go Pro 3 Black edition and the Go Pro app installed on the phone, the live previw only works in software and wont support the hardware preview mode so it turns off the preview if I start recording.
All this said, my GF has a 100% Stock Samsung S4 and the I can plug in the Telemetry stick and it connects and works fine with the quad. I can also connect the Go Pro, have its preview set to hardware render, so I can preview and record at the same time (great for live view on the Heli, while capturing the action too!)
So needless to say I'm pretty pissed I've got a device on paper that should be as good or better, but in real life it doesn't play ball!
So I realise this is due to lack of support from HTC...So I Installed the Teamsense Kernel (http://d-h.st/0Mw) to hopefully fix the issues, the USB telemetry works, but and a big but the phones on-board camera no longer works! If you I load the camera app the screen comes up black.
Anyone know what's going on?? Maybe I'm not doing the Kernel upgrade correctly - I've tried the stock/Home2wake buttons, etc options at setup with no changes to the camera problem...
Cheers
for your Nikon DSLR you can use the build in IR blaster to control it, without any cable
You said you're on a stock ROM. Is it a 4.1.2 ROM or a 4.2.2 ROM? If I remember correctly I helped someone a few days ago who flashed a 4.2.2 kernal on a 4.1.2 ROM and it broke his cameras.
AT&T HTC One
BaadNewz's InsertCoin 3.0-7
Flar2's Bulletproof 3.4
CoryTallman said:
You said you're on a stock ROM. Is it a 4.1.2 ROM or a 4.2.2 ROM? If I remember correctly I helped someone a few days ago who flashed a 4.2.2 kernal on a 4.1.2 ROM and it broke his cameras.
AT&T HTC One
BaadNewz's InsertCoin 3.0-7
Flar2's Bulletproof 3.4
Click to expand...
Click to collapse
Cheers for reply
Running 4.1.2, made an edit with phone specs to the original post straight away when I realised I forgot them, but it wouldn't let me update or post a reply for 5mins being a new member...
Phone Specs:
4.1.2
sense 5.0
1.29.980.17 Software number
5.12 HTC SDK API
3.4.10 - Stock kernel
From what I understand this TeamSense Kernel is for version 4.1.2? http://forum.xda-developers.com/showthread.php?t=2255160&page=145
ghtypp ryo
Muhammad.Muayad said:
for your Nikon DSLR you can use the build in IR blaster to control it, without any cable
Click to expand...
Click to collapse
Yep had a Nokia N900 for a long time with IR doing the same thing, but prefer using the cable so you don't need line of sight/holding the phone the whole time...Cheers
Take a look at this, maybe it'll help.
CoryTallman said:
Take a look at this, maybe it'll help.
Click to expand...
Click to collapse
Cheers, looks like he had the same issue, but he just ended up flashing a stock 4.2.2 kernel & rom to fix the problem? AFAIK the stock 4.2.2 doesn't add any more compatibility for OTG?
I can resolve my camera issues by going back to stock, but I'd prefer to have the camera and full OTG support , and hopefully Go Pro hardware support too
What you can do is flash a 4.2.2 Rom, then reflash the custom kernel. It will have the same OTG support you have now, but with working cameras.
AT&T HTC M7
Baadnewz's InsertCoin 3.0-10
Flar's Bulletproof 4.3
CoryTallman said:
What you can do is flash a 4.2.2 Rom, then reflash the custom kernel. It will have the same OTG support you have now, but with working cameras.
AT&T HTC M7
Baadnewz's InsertCoin 3.0-10
Flar's Bulletproof 4.3
Click to expand...
Click to collapse
Thanks Cory - I did read somewhere that the custom kernel was designed for 4.1.1 only?
boardnz said:
.........I also have a Go Pro 3 Black edition and the Go Pro app installed on the phone, the live previw only works in software and wont support the hardware preview mode so it turns off the preview if I start recording.
Click to expand...
Click to collapse
The latest GoPro app combined with the latest Hero 3 Black firmware now enables preview whilst recording.
I am on InsertCoin 4.3 Sense 5.5 and wanting to give Renovate Milestone 6 a go, however when I attempt to flash the aroma installer begins but I lose touchscreen functionality. Therefore I am not able to choose anything in aroma rendering the Rom basically unflashable. I can use volume rockers/power button to continue but if I am getting issues initially with the touchscreen than its probably not a good idea to continue. Any ideas would b awesone guys! Thanx in advance....
What is your firmware (version main) and which version or recovery do you have?
Q&A for [Kernel] [LOLLIPOP] [AOSP] [19.11.2014] AGK-LOLLIPOP v1.1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Kernel] [LOLLIPOP] [AOSP] [19.11.2014] AGK-LOLLIPOP v1.1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Which version TWRP advise to use?
Non aroma version please
i use this rom : http://forum.xda-developers.com/htc-one/development/rom-google-play-edition-lollipop-v1-00-t2963927/page37
Can i flash : http://forum.xda-developers.com/htc-one/development/kernel-agk-lollipo-v1-0-t2945268
Plz help me ! i can speak litter english ! tks so much
Somehow the kernel setting is funky for me.
DT2W is disabled even tho I enabled it during installation. F2W and F2S has to be disabled and enabled again to work.
I've tried both latest CM12 or the liquid smooth ROM, same thing.
Anyway to fix this?
Missing features
When i flash the GPE 1.21 (or even 1.0 and 1.1) zip using TWRP onto my gpe m7, I don't get any options in trickster which I did not have in the previous kernel. This led me to believe that there might be some issues with the downloads. I have no idea of how kernel zips should look like, but when I open the ones I downloaded, there are some folders, one of which is "system", which contains some more foldern which are all empty. This doesn't seem right to me, especially since elementalX has files inside those foldern, while this one doesn't.
Can you tell me what to do? I don't have flick2wake or all the governors you describe, only the ones I had with elementalX, so it apparently doesn't intall correctly.
GPE set on boot?
Hi guys, having an issue with the GPE version of the kernel... none of the settings will set on boot (tried using Trickster, Kernel Tweaker, and a couple others).
Also, does the kernel provide access to an rw /system folder? Because I can't use AdAway (it says it works then on reboot the default hosts file is installed) but when I tried the GPE ElementalX, AdAway worked just fine.
Hi, i tried to flash the latest version of your kernel V1.61 with aroma installer on the CM12, but when aroma opens in the top appears the writen v1.51 is a bug?or it's a issus of aroma version?
Hi,
I'm trying to get the aosp version of the kernel installed on my HTC one M7UL running the latest CM12 nightly. Unfortunately after the flashing process with TWRP, the phone goes in bootloop mode. I tried both the aroma package and the ready-to-flash one of the 1.6 and 1.61 version, and I had the same problem.
Is there any possible solution?
_MdnMtt_ said:
Hi,
I'm trying to get the aosp version of the kernel installed on my HTC one M7UL running the latest CM12 nightly. Unfortunately after the flashing process with TWRP, the phone goes in bootloop mode. I tried both the aroma package and the ready-to-flash one of the 1.6 and 1.61 version, and I had the same problem.
Is there any possible solution?
Click to expand...
Click to collapse
I have encountered the same problem
This 1.62 is aosp and not gpe, correct?
Clean install CM12 22 AGK 1.62 = OK
Why was logo 2 wake/sleep option removed?
I've used v 1.62 wih cm12 nigthli 11/02 and the system was very jerky even after several restart
Tried this kernel (V1.62) with a fresh install of CM12 Nightly 2015-02-16 and only get Bootloops.
Any one else?
Or even better: suggestions?
Guids said:
I have encountered the same problem
Click to expand...
Click to collapse
nontec said:
Tried this kernel (V1.62) with a fresh install of CM12 Nightly 2015-02-16 and only get Bootloops.
Any one else?
Or even better: suggestions?
Click to expand...
Click to collapse
Same here with CM12 nightly 2015-02-19.
Would have loved to use dt2w...
Sent from my One using XDA Free mobile app
Noob Question
I am relatively new to android.I have the One M7 (Hong Kong) version, running on complete stock Lollipop 5.0.2.Which version of the kernel should I use?
And is it sufficient to simply flash the .zip from recovery?
kernel d2w problem
Hy.I´m runing aosp based rom(slimlp) and i cant set the d2w option in ttrickster mod to 2.
after i set it to 2,it set itself to 0.
i have tried the version 1.6 and 1.7.
Does it work on moto e running on cm12 ??
Is compatible kernel with m7wls?
Double tap 2 wake not working
I'm on CM12.1, HTC One M7, AGK kernel 1.61.
Double Tap 2 wake is not working, i installed the aroma-installer version.
Hey friends,
I just got done more or less gaining S-Off on my VZW One and Flashing stock 4.4.3 radios, kernels, and firmware. After which, I went and flashed Viper One 7.0.2 and figured I'd flash the kernel it came with. Every looks to be running fantastic, but now I'm just trying to get double tap to wake working again. I had it working on a very old build of Viper One but can't get it working here. I also went and enabled the " Apply kernel settings on boot" option that was present but no dice. Any ideas?
MagicsMan said:
Hey friends,
I just got done more or less gaining S-Off on my VZW One and Flashing stock 4.4.3 radios, kernels, and firmware. After which, I went and flashed Viper One 7.0.2 and figured I'd flash the kernel it came with. Every looks to be running fantastic, but now I'm just trying to get double tap to wake working again. I had it working on a very old build of Viper One but can't get it working here. I also went and enabled the " Apply kernel settings on boot" option that was present but no dice. Any ideas?
Click to expand...
Click to collapse
HTC One M7 Verizon possibly this: http://forum.xda-developers.com/showthread.php?t=2600691
you should double check that is for your device & version
and do a nandroid backup before
According to that link, that kernel supports Sense 5.5 Android 4.4, while Viper One 7.0.2 is based on Android 4.4.3 Sense 6. Will this still work or am I better off looking for a different kernel from the Verizon M7 thread...
MagicsMan said:
According to that link, that kernel supports Sense 5.5 Android 4.4, while Viper One 7.0.2 is based on Android 4.4.3 Sense 6. Will this still work or am I better off looking for a different kernel from the Verizon M7 thread...
Click to expand...
Click to collapse
yep, sorry my bad - as i dont have a Verizon device i hardly follow anything about it
perhaps check here: http://forum.xda-developers.com/verizon-htc-one/#kernels
and the Verizon dedicated sections: http://forum.xda-developers.com/verizon-htc-one
or even ask in the ViperOne / kernel threads, if you cant find anything