Database Develop

PAYING for help!

Since i live in Brazil and here the galay s i9000 version is much different then our captivates and there is any place where i could try to fix my captivate i´ve decided to donate US$ 50,00 for who helps me fix my phone.
Here is exactly what happened:
I was already on cognition 2.3b6 but decided to flash back to stock and flash it again to 2.3b6 since i´ve never flashed back to stock and sincer i installed the firts custom room.
I installed the stock version usin odin 3 ( the files from cognition download threat ) and i didnt disabled lag-fix netheir deleted any folder or anything at all.
The installation to stock was succesful, then i used one click root installed the rom manager and selected the 2.3b6.zip
After rebooting it went to recovery screen as usual.. i selected the reinstall packages options and it reboot again, now it stuck some time on the at&t logo ( never had the voodoo voice ) ...and the rebooted again..
and here is the part where i know i was stupid
this time it entered on clockwork recovery mode then i tryed to backup and mount and it came back again to clockwork recovery mode... then i decided to wipe data and cache... then to format my sd card ( stupiedest point ! )..after i tryed to install packages again and after reboot it stayed like it is now
without the usb cable... if i turn it on it goes to at&t logo screen then it flashes on at&t logo... and then boot on recovery mode.
if i put the battery...plug the usb cable and try to turn it on.. the phone doesnt go to at&t logo.. it just stays on the charging mode.
i already tryed all download modes and none of them worked...
here is the list of things i´ve already ordered from sparkfun if i need to build that JIG thing...
1 - $10.95 - COM-09258 - Resistor Kit - 1/4W
1 - $3.95 - BOB-10031 - USB MicroB Plug Breakout Board
other info:
when i get on the at&t logo or recovery mode odin recognizes the phone as a com 4... so i cant flash it with odin...
and when i try to reboot on download mode using adb i receive an error msg " [1] segmentation fault " when i try to get the SU
any help ?

Can you still get to clockwork recovery?
If you can still get to cwm, download this http://www.ponack.net/designgears/JH7_OTA.zip and copy it to your external sd card, and try to flash it.
For download mode did you try:
1. Start odin
2. Remove battery from phone
3. Plug usb cable into phone
4. Hold down both volume buttons
5. Put battery back in while holding both volume buttons
Sent from my Captivate

not anymore...

curti.nogg said:
Can you still get to clockwork recovery?
If you can still get to cwm, download this http://www.ponack.net/designgears/JH7_OTA.zip and copy it to your external sd card, and try to flash it.
For download mode did you try:
1. Start odin
2. Remove battery from phone
3. Plug usb cable into phone
4. Hold down both volume buttons
5. Put battery back in while holding both volume buttons
Sent from my Captivate
Click to expand...
Click to collapse
is there any specific way to get on clockwork recovery ?
when i try to get on download mode like you said it just keeps charging the battery...
its strange.. when the usb is plugged the phone doesnt go enter on recovery mode netheir at at&t logo

tegots said:
is there any specific way to get on clockwork recovery ?
when i try to get on download mode like you said it just keeps charging the battery...
its strange.. when the usb is plugged the phone doesnt go enter on recovery mode netheir at at&t logo
Click to expand...
Click to collapse
If it's still on the internal sd card and you can get to recovery, choose the option "reinstall packages" it should do something and then it may kick you back to recovery 2e and then try one more time.
Sent from my Captivate

curti.nogg said:
If it's still on the internal sd card and you can get to recovery, choose the option "reinstall packages" it should do something and then it may kick you back to recovery 2e and then try one more time.
Sent from my Captivate
Click to expand...
Click to collapse
i can get on recovery 2e but when i try to reinstal packages it says that /sdcard/update.zip doesnt exists

Search for instructions on building a jig. It is a device that forces download mode, you need a spare cable our connector to cut up and some resistors. http://forum.xda-developers.com/showthread.php?t=841512
Sent from my SAMSUNG-SGH-I897

so my only hope is tat jig thing ?!
if yes i will stay a while without my phone =/

Wait so what happens if you have odin one click open, then unplug usb, pull battery, then put the battery back in and then plug usb in while holding both volume buttons. That's usually the surefire way to get download mode.
Sent from my SAMSUNG-SGH-I897 using XDA App

No.. the Battery trick should work. If your getting the battery charging while the device is turned off and the USB is plugged in that battery trick should work.
I've horked my phone harder then you have an still managed to get back into download mode.
The trick is remove the sim/sdcard and battery.
Plug in the USB
Then jam the battery back in.
Also.. if it's looping at the ATT logo you might have it up enough to do ADB commands.
See if your computer is recognizing the device. - ADB Devices - If it returns a value then you can just do:
Adb reboot download.
And Odin 1-click as normal to restore it.

KCutrer1 said:
Wait so what happens if you have odin one click open, then unplug usb, pull battery, then put the battery back in and then plug usb in while holding both volume buttons. That's usually the surefire way to get download mode.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
it keeps frozen on the charging circle ( the grey circle doesnt keep moving )

I'd try pulling the battery again - it takes a few times to try and get it.
But.. I would try doing the ADB commands and see if you can get it into download that way.

avgjoegeek said:
I'd try pulling the battery again - it takes a few times to try and get it.
But.. I would try doing the ADB commands and see if you can get it into download that way.
Click to expand...
Click to collapse
when i get home i will keep trying, but not sure if its gonna work, i´ve never had that error with adb

Boot Loop + computer won't recognize phone

Hi everyone,
After trying to flash the latest SlimBean rom on my Galaxy S, I ended up with a boot loop and no more recovery mode. I can always access to the Download mode but my computer doesn't recognize my phone when I plug it in, so I can't flash a new kernel to retrieve the recovery (thing that I had already successfully done before). When connecting the phone to the PC, no sign of life, no noise, no new device in the device manager... Tested on another PC, same thing (I did not test with another cable though, it could come from there, but it is doubtful). Drivers are up to date, it works with other phones.
I also tried with Heimdall, nothing appears in the USB device list relating to my phone (not surprising though).
I saved my GS a lot of times before, but this time I am stuck with this... Any idea or it is just hopeless ?
Thanks in advance, and keep up the good work !

Are you sure no recovery as you need to flash it twice due to partition changes make sure you hold volume down home and power until the screen flashes then let go of them its guaranteed to get recovery if its there
Sent via that ninja standing right behind you

Yes I'm sure, if I hold down-home-power I can access to the download mode. If I hold up-home-power (like I used to do to enter the recovery mode) it just keeps boot looping.

OK well you will need to try a different computer I guess one that detects your phone
Sent via that ninja standing right behind you

Wirllpool said:
Yes I'm sure, if I hold down-home-power I can access to the download mode. If I hold up-home-power (like I used to do to enter the recovery mode) it just keeps boot looping.
Click to expand...
Click to collapse
you may try this way,
Boot to recovery mode without SIM card and memory card.

Flashed a rom and my z1 died

flashed this via recovery. http://forum.xda-developers.com/xperia-z1/development/stock-14-4-0-133-t2887081
my phone appears to be dead. no lights, no nothing.
edit: Now when I charge it the led is blinking RED. Anyone ? still doesnt seem to go into fastboot even..

Info
nathan96 said:
flashed this via recovery. http://forum.xda-developers.com/xperia-z1/development/stock-14-4-0-133-t2887081
my phone appears to be dead. no lights, no nothing.
Click to expand...
Click to collapse
What you mean nothing!
can boot even to fastboot?
if can access to fastboot so flash the recovery and then everything you want through recovery...
:good:

Geeks Empire said:
What you mean nothing!
can boot even to fastboot?
if can access to fastboot so flash the recovery and then everything you want through recovery...
:good:
Click to expand...
Click to collapse
Nothing....it just died. no lights, no vibrations, no nothing...I have tried all the combos with the vol buttons and the power.

I think I'm in the same boat. Flashed the latest PA then reboot just stayed on black screen. Holding power causes short vibrate every couple of seconds. Connected to PC and able to boot into fastboot mode. Is my best recovery method to just flash the latest ftf?

Its most likely a kernel issue. Flash the kernal you need for that rom

is it ok in mode flashtool ? (vol- , power, plug in) if yes flash an official rom ftf by flashtool

try holding VOL+ and Power button for 10 sec then try entering fastboot or flashmode

same problem but my xperia vibrates but not open

Please help me I feel so frustrated.

My device is Mi Max 2 today I tried flashing some custom rom which is because yesterday it was normal but it suddenly restarted when I tried booting it up it went to recovery mode btw my recovery mode is TWRP so I tried to just flash a rom again but after its done flashing It keeps booting into TWRP so I was searching online and decided to go back to stock I used the Miflash but after it successfully flashing again This time I can no longer access bootloader my volume up does not work anymore only down and power and im back to stock recovery mode tried accessing MiPcSuite but to still no avail. Please help im seriosly sad like frustrated beacuse I have been trying to find for a fix since yesterday.
Is my volume up broken? is it the reason why I can't access the bootloader. everything went south since yesterday.
I would like to add that the power and the volume buttons where acting funny yeterday when it was doing just fine could it be my volume button but why does it keep booting on TWRP Thinking about it I was getting out of the bath could have damage the volume buttons or something

Is your volume down button is working ??
please help me 12 said:
My device is Mi Max 2 today I tried flashing some custom rom which is because yesterday it was normal but it suddenly restarted when I tried booting it up it went to recovery mode btw my recovery mode is TWRP so I tried to just flash a rom again but after its done flashing It keeps booting into TWRP so I was searching online and decided to go back to stock I used the Miflash but after it successfully flashing again This time I can no longer access bootloader my volume up does not work anymore only down and power and im back to stock recovery mode tried accessing MiPcSuite but to still no avail. Please help im seriosly sad like frustrated beacuse I have been trying to find for a fix since yesterday.
Is my volume up broken? is it the reason why I can't access the bootloader. everything went south since yesterday.
I would like to add that the power and the volume buttons where acting funny yeterday when it was doing just fine could it be my volume button but why does it keep booting on TWRP Thinking about it I was getting out of the bath could have damage the volume buttons or something
Click to expand...
Click to collapse
By using volume down and power you can boot to fastboot and then try flashing the Rom using fastboot method
Second if you find other max 2 , you can restore the partition from other max 2, partition you have to restore are boot , system, system image, cust ( dont restore efs ,firmware partitions

beingtejas said:
By using volume down and power you can boot to fastboot and then try flashing the Rom using fastboot method
Second if you find other max 2 , you can restore the partition from other max 2, partition you have to restore are boot , system, system image, cust ( dont restore efs ,firmware partitions
Click to expand...
Click to collapse
Sorry for late reply Im stuck at the Mi-Recovery 3.0 I cant access fastboot. only recovery

Did you unlocked the bootloader
please help me 12 said:
Sorry for late reply Im stuck at the Mi-Recovery 3.0 I cant access fastboot. only recovery
Click to expand...
Click to collapse
Did you tried volume - and power button to get into fastboot.
If your device boots you can also try adb method to boot into bootloader ( fastboot)

beingtejas said:
Did you tried volume - and power button to get into fastboot.
If your device boots you can also try adb method to boot into bootloader ( fastboot)
Click to expand...
Click to collapse
I did but it just boots me up into fastboot mode btw I got this into service center and they tried using EDL and flash a rom but after flashing it still only boots into recovery mode

If it boots into fastboot mode you can use commands to flash stock miui rom from ther
please help me 12 said:
I did but it just boots me up into fastboot mode btw I got this into service center and they tried using EDL and flash a rom but after flashing it still only boots into recovery mode
Click to expand...
Click to collapse
I have the whole detailed process before , you will find if you search the thread..

beingtejas said:
I have the whole detailed process before , you will find if you search the thread..
Click to expand...
Click to collapse
Well the thing is after flashing the official rom it still boots back into recovery mode.

Then you have to try flashing again
please help me 12 said:
Well the thing is after flashing the official rom it still boots back into recovery mode.
Click to expand...
Click to collapse
If you can.. tell one thing , do your device is able to boot in fastboot ??

beingtejas said:
If you can.. tell one thing , do your device is able to boot in fastboot ??
Click to expand...
Click to collapse
heres an update I was somehow able to boot into fastboot mode and installed TWRP and then I tried to flash ROM's into it it says sucessfully but it boots me right into TWRP again.

beingtejas said:
If you can.. tell one thing , do your device is able to boot in fastboot ??
Click to expand...
Click to collapse
is there somewhere we can chat?

https://chat.stackexchange.com/rooms/94776/discussion-on-question-by-need-help-mi-max-2-soft-bricked check this up theres also one guy whos helping if you want to help just use this.

G973F Stuck on Boot Screen After Failed BeyondROM Install and TWRP 3.4.0-3 Flash

I believe i've royally screwed up and i want to know if there's anything I can do to save my phone.
I downloaded the latest BeyondROM from here after being on a previous version for about a year (not sure which one I was on):
https://forum.xda-developers.com/ga...evelopment-exynos/rom-beyondrom-v6-0-t4017921
I flashed the zip file through TWRP and only after flashing did I realize that I was on TWRP 3.3.1-11 and not 3.4.0-3, which I'm guessing is why my phone is now stuck on the boot logo when I boot it. I went back into TWRP and cleared the Dalvik & standard cache again after this but no dice.
But it gets worse. I then tried to upgrade to 3.4.0-3 by flashing it from TWRP 3.3.1-11 using the recovery partition, hoping to reflash the firmware after doing so.
After doing this and my phone rebooting, not only am I stuck on the boot screen, but now I can no longer enter recovery mode either by holding Bixby + Vol Up + Power. My phone isn't recognized by my PC or Odin now either.
Is my phone completely bricked, or is there a way to salvage this mess i've made?
Could really use some help.
Thanks guys.

If you can go to download mode, try re-flashing the stock Samsung firmware via Odin.

XTrail02 said:
If you can go to download mode, try re-flashing the stock Samsung firmware via Odin.
Click to expand...
Click to collapse
Thanks for the suggestion, however that's my primary issue. I can't get to download mode (which really should be recovery mode since I have TWRP).
Do you think it could be an issue with me rebooting to recovery mode after upgrading TWRP using TWRP itself? Maybe my phone needs to be hard powered off once to access TWRP again?
And since I have that failed ROM install, the only way to power off the phone would be to wait for the battery to drain.

Power+volume down+Brixby goes right into download mode bypassing the recovery

TheMassiveEffect said:
Power+volume down+Brixby goes right into download mode bypassing the recovery
Click to expand...
Click to collapse
My phone just keeps restarting when Power + vol down are held. Looks like draining the battery didn't help either. I'm stuck on the boot screen even when plugged in with 0% battery. When I remove the USB Cable and hold Vol down + Power, the phone seems to turn off because there's no battery, but immediately after plugging in a power cable, the phone automatically turns on by itself again.

You can try this, but best not to flash anything without charging battery first. You can charge while phone is off: