Database Develop

[Q] HELP!!!Cannot restore to stock ROM

Hi there I got a Samsung captivate SGH-I897 and I got a custom rom installer from Rom Kitchen. I wanted to go back to stock rom but once i get into download mode the phone not loading the rom ODIN stays in DO NOT TURN OFF THE TARGET!please help get out of that and use my phone again!the Base Rom i Used on custom rom is XWJS5 v9.6 with Firebird Kernel
Thank you for your time

close odin 1 click, unplug phone leave it in d/l mode, open odin plug phone back into usb, you should see a com port then like 7 or 3 or something. then hit start. Sometimes I have to repeat process 3 or 4 times before odin works right. if it isnt doing anything unplug it, remove battery put battery back in hold volume buttons down when u plug it back into usb and should go back to d/l mode. make sure odin is opened first.

I ve tried all these the problem is that I am at Phone - ! - PC and its hard to get to Download Mode but after many tries I all of a sudden I get in that mode then nothing more I can do!

Does Odin recognize the phone when you connect the USB cable when your phone is in download mode? Also which OS is your PC running? I was having an issue with Odin not pushing the stock rom and I had to start it as administrator in Win 7 to get it to work.
Sent from my SGH-I897 using XDA App

Yes DOES recognize the phone but not pushing the ROM on it!I am on Windows 7 and i always run ODIN as Admin!
Any ideas?

I've heard Odin can be flaky and may take several attempts before it will work. I would keep trying. Also possibly change which USB port you are using on your computer and see if that helps. I was in this exact same scenario last week. I would turn on the phone and get the computer/phone/exclamation point of death screen. I couldn't get the phone to boot or into download mode without using a JIG. Finally on about the third try Odin worked for me. I started Odin as admin and almost as soon as I plugged in the phone to USB I hit flash and it worked. Best of luck...

Odin is not flaky. It works if you follow instructions. It's the user's fault, not the software.
Anyway, this is probably the ten millionth time I've posted this in the last hour, but here's how to get into download mode if nothing else works. If this doesn't work, you hard bricked your phone and would need a JTAG flash.
Loggik said:
Unplug the phone from the computer and remove the battery, SIM, and external SD if there is one.
1. Open Odin one click.
2. Plug the phone in (without the battery in the phone). Do not press any buttons, especially the power button.
3. Press and hold the volume rocker (holding down both volume up and down).
4. Insert the battery while holding the volume rocker.
5. The phone should boot into download mode. You can then let go of the volume rocker.
Now wait 30 seconds (if you press "Start" too soon, it will not work). Then press "Start" and your flash should finish.
Click to expand...
Click to collapse

my phone is in download mode but odin hung once i unplugge and plugged back in ever since phone isnt see by odin or pc?

Yes, as I stated in my post above; you must reboot your phone every single time you go into Download mode. What I mean by that is that if you go into Download mode and plug your phone in, then unplug it, you cannot plug your phone back in unless you reboot your phone.

Loggik said:
Yes, as I stated in my post above; you must reboot your phone every single time you go into Download mode. What I mean by that is that if you go into Download mode and plug your phone in, then unplug it, you cannot plug your phone back in unless you reboot your phone.
Click to expand...
Click to collapse
if youre reffering to me my cappy was bricked all it will do now is go into download mode if i do the 3 resistor trick to force it to but then its not seen by pc now

leo5111 said:
if youre reffering to me my cappy was bricked all it will do now is go into download mode if i do the 3 resistor trick to force it to but then its not seen by pc now
Click to expand...
Click to collapse
Didn't realize that you weren't the OP. Regardless, I was referring to you.
Anyway, this is a more serious case than I thought. Have you used the AIO Captivate Tool? If so, did you install the LibUSB drivers? Those will disable Odin from working (I'm probably going to PM Bay_wolf sometime soon about that...).
Do get everything working again:
Plug the phone in while it's in Download mode. Open the start menu, right click on "Computer", and click "Manage". In the left sidebar, select "Device Manager".
There will be a dropdown labeled "LibUSB Devices" or something with the word libusb in it. Find that dropdown, right click the Samsung USB Device or whatever it's called and select "Update Driver Software...". Then select "Search automatically for updated driver software."
An alternative is to just use the "Flash to Stock" option in the AIO tool. This and the above is assuming that you had used the AIO Tool and installed the LibUSB drivers previously. If you have not, then you may have to try and re-install the Samsung drivers. If that doesn't work, ask to borrow a friend's computer for now to flash back to stock, because this happened to me before and I didn't know how to fix it, but I was about to re-install Windows anyway so I never figured it out.

im on xp and pc sees my cappy but odin execution 1.00 is stuck on examing files is there another version i should be trying? if it helps this is what i was trying to get off my phone when the crap hit the fan http://forum.xda-developers.com/showthread.php?t=940330 and i tried to put paragon 6 on and it kept erring because i needed to do a odin job first on it

I finally managed to turn my phone on last nigh by doing the following:
1.Open Odin
2.Get in download mode (it took me many tries but finally I made it)
3.Disconnect phone
4.Reconnect phone
5.Choose the PIT file
6.Uncheck Auto Reboot
7.Hit Start
After that I took out the battery put it back again and power up.the phone will boot but not show the main screen it will only vibrate!then i used the AIO pack to put it back in recovery mode and i reinstalled the Custom Firmware I was using. Now is on and working again!I really dont know now if I can flash back to stock!

niderium said:
I finally managed to turn my phone on last nigh by doing the following:
1.Open Odin
2.Get in download mode (it took me many tries but finally I made it)
3.Disconnect phone
4.Reconnect phone
5.Choose the PIT file
6.Uncheck Auto Reboot
7.Hit Start
After that I took out the battery put it back again and power up.the phone will boot but not show the main screen it will only vibrate!then i used the AIO pack to put it back in recovery mode and i reinstalled the Custom Firmware I was using. Now is on and working again!I really dont know now if I can flash back to stock!
Click to expand...
Click to collapse
did you use thee pitfile came with odin in the all in one or did you select another pitfile if you used a differnt pitfile then comes with odin 1.00 that might be my issue

No no I dont use this on I use one I had on my PC.
I think the problem is a write protection as I can see when i connect the phone it displays a CDROM drive when I click on it, opens ok but I cant write anything on the phone.and every time I try to use ODIN to flash to stock it stays in DO NOT TURN OFF THE TARGET and nothing happens!
Any ideas on how to get back to stock firmware?

[Q] Stuck in AT&T Screen boot loop, can't get into either recovery or download mode

[Q] Stuck in AT&T Screen boot loop, can't get into either recovery or download mode
I went back to stock (or tried to) and after Odin was done the phone just stuck in the AT&T boot loop, download mode is not working (it was working before so I know I am doing the right combination/timing) doing endless combinations of Vol-/Vol+/Power doesn't seem to get me into recovery mode-
I put my girlfriend's captivate on Continuum over the weekend so I'm sure I'm pressing the right keys to get into download mode, but I get nothing but the battery.
I do have the Android SDK in my computer but I'm never able to get past that naggy screen, so I can't do a 'adb shell reboot recovery' is a JIG my only option?
To recap, can't get into download mode and pressing volume up / volume down and power buttonuntil the AT&T screen and then release the power button doesn't get me into recovery mode.
Need help!

I've been in the exact same situation.A jig is most probably the only option.
Many people have had this problem and find that a jig is the answer.
Sent from my cappy UC'd 900mhz and UV'd running di11is rom/ Onix kernel

first try with just holding vol buttons and then inserting USB cable...hold vol buttons till its goes into download mode or the screen changes..if not then try following steps...
1. remove the usb cable, battery, sdcard, SIM.
2. wait 10 seconds, then insert the USB cable.
3. press and hold the 3 button combo while you insert the battery
4. continue to hold until phone's screen goes black twice and release power button.
5. timing is critical, it may not work the first time. Keep going until you see the COM port is connected properly.
still no Dl mode..then buy a jig or make one yourself

Right so I'm download mode now, but every time I go back to STOCK I'm re-stuck in the same loop, seems that I can't get out of it.
I got into download mode with a JIG, but still can't see my phone from my computer, so I can't run the adb shell to get it to boot in recovery mode
I'd appreciate any help you could give me!

leopic said:
Right so I'm download mode now, but every time I go back to STOCK I'm re-stuck in the same loop, seems that I can't get out of it.
I got into download mode with a JIG, but still can't see my phone from my computer, so I can't run the adb shell to get it to boot in recovery mode
I'd appreciate any help you could give me!
Click to expand...
Click to collapse
Restart your computer, use a different usb cable, a different usb port. if that doesn't work, unistall the drivers and reinstall, restart your comp and try again.

For anoyone that might find this thread, Odin 1 Click didn't work for me, so I flash back into stock using Odin (not the 1 click version, another one), here are some links that proved to be very helpful (I ended up Flashing to Serependity 6.4):
http://forum.xda-developers.com/showthread.php?t=1031749
http://www.youtube.com/watch?v=Rdn5GoRjhn0
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
http://forum.xda-developers.com/showthread.php?t=884364
http://forum.xda-developers.com/showthread.php?t=919816
http://android-roms.info/roms/80-Serendipity
http://serendipityrom.weebly.com/download.html

I had the same problem just a few weeks ago.
The problem is once you start using 2.2 you can't use ODIN 2.1 anymore.
This is the one that worked for me I897UCJI6-OCD-REV02-Low-designgears(1)

Frawgg said:
I had the same problem just a few weeks ago.
The problem is once you start using 2.2 you can't use ODIN 2.1 anymore.
This is the one that worked for me I897UCJI6-OCD-REV02-Low-designgears(1)
Click to expand...
Click to collapse
this is actually a false statement.
i can still use odin 2.1 after flashing 2.2 roms and even stock 2.2 upgrades

Anyone thought about trying Heimdall if Odin doesn't work?

Yes, i tried using heimdall and that didn't work. I'm wondering what leopic did to fix his, if you could list the steps instead of the links that would help a lot!

stuck in att screen and battery loop
so i have tried searching for threads that match the issue i am having and some of them do and some doent so i have decided to post this. i tried flashing back to stock from a custom rom i was using. i used Odin to do this. i didn't work so i tried it again, same result. it dosent boot just sits at the captivate splash screen. i tried using a different oden tool and after that it just loops through the ATT splash screen and if i have the usb cable plugged in, it just loops the battery screen. im not even sure if it charges. i have tried everything i can find to do to get the download mode to come up and nothing, just loops. i have not tried the jig on this phone yet b/c i haven't made it to radio shack yet to pick the resistors up. is that going to be my only option?

what rom WERE you on?was it cm7 or miui?

Connection Issues? < click here for information on download and recovery mode....
information you should have had BEFORE FLASHING your phone..

i was on serinity 6.2.
i have tried all possible ways to get into d/l mode that i have found

so from the link provided
FROM A POWERED-DOWN STATE - BATTERY REMOVED
- Insert battery, then press and hold Vol+ and Vol-, then insert your USB cable..
goes into battery loop
- Press and hold Vol+/Vol-, Insert Battery, Insert USB cable
goes into battery loop
- Press and hold Vol+/Vol-, Insert USB cable, Insert Battery
goes into battery loop
- Use a 301Kohm jig between USB pins 4-5 (can be manufactured jig or homemade chain of resistors)
have not tried yet

asorendo said:
so from the link provided
FROM A POWERED-DOWN STATE - BATTERY REMOVED
- Insert battery, then press and hold Vol+ and Vol-, then insert your USB cable..
goes into battery loop
- Press and hold Vol+/Vol-, Insert Battery, Insert USB cable
goes into battery loop
- Press and hold Vol+/Vol-, Insert USB cable, Insert Battery
goes into battery loop
- Use a 301Kohm jig between USB pins 4-5 (can be manufactured jig or homemade chain of resistors)
have not tried yet
Click to expand...
Click to collapse
Sounds like a jig is in your future.

YAY. i got the resistors hook it all up and download mode loaded up. AWESOME!!!

viny2cool said:
first try with just holding vol buttons and then inserting USB cable...hold vol buttons till its goes into download mode or the screen changes..if not then try following steps...
1. remove the usb cable, battery, sdcard, SIM.
2. wait 10 seconds, then insert the USB cable.
3. press and hold the 3 button combo while you insert the battery
4. continue to hold until phone's screen goes black twice and release power button.
5. timing is critical, it may not work the first time. Keep going until you see the COM port is connected properly.
still no Dl mode..then buy a jig or make one yourself
Click to expand...
Click to collapse
You safe my Note.. Many Thanks
I thought I lost her x_x

I had this problem before
Users - I am new on this forum and I know this thread is old however I had this problem and it resolved itself. Here is how.
Background: I tried to charge my ATT Captivate using a Nokia microUSB charger that was plugged into a 120v outlet. After a few minutes of charging, the phone would no longer boot past the ATT World Phone screen. Afterwards I tried everything under sun to get a computer recognize the phone so I could reflash the ROM. Nothing worked (different computer, different USB cables, reinstalled the Samsung drivers, etc....).
Resolution of Problem: As a last ditch effort, I tried charging my phone with the same Nokia microUSB cable that appeared to cause the problem in the first placed. This time the Nokia USB cable was plugged into my computer instead of the 120v outlet. My computer had the Samsung phone drivers installed. To my amazement the phone booted up after I unplugged it from the USB cable and all is well.
I am not sure what happened but my Captivate is back with no damage. Hope this helps some poor soul who is trying desperatley to get a computer to recognize a phone that for no apparent reason will not be recognized.

Captivate not working after flashing CM10 nightly
HELP, Actually I rooted my SAMSUNG CAPTIVATE I897 and then tried to install CM10 nightly thorugh Clockwork mod recovery. And I forgot to wipe Dalvik cache. The phone got stuck in AT&T Screen for hours together, the phone was not at all responding i.e. neither to download mode or recovery mode. But yesterday the phone went into download mode .. i tried to install the stock rom for Samsung captivate. Its coming till galaxy S screen after that its switching off ... What is the possible solution. Pls Help with this as I am complete novice to this. Help will be appreciated :good:

[Q] phone --/!\-- computer

Im pretty sure my phone is soft bricked, but it wont recognize in adb shell to reboot into recovery
(eg, "error: device not found") . At first windows kept saying device not recognized, so i reinstalled drivers and now it says Samsung Mobile Modem is good to go, but adb devices/shell still wont work. What do?

Have you tried odin
Sent from my SGH-I897 using XDA Premium App

Was just about to update, tried odin and it recognizes but it hangs at file analysis. Edit: On both odin oneclick and the manual pit and tar

do get unbricked you have to get it into download mode and then plug it into odin3 1 click to go back to stock 2.1
Here is the methods to get into download mode:
Method 1: Key Combination 1 (recommended)
1. Remove your battery, external SD card and SIM card
2. Reinsert battery and battery cover.
3. Hold down both volume buttons and while holding them down plug the phone in.
Method 2: Key Combination 2 (if method 1 doesn't work)
1. Remove your battery, external SD card and SIM card
2. Reinsert battery and battery cover.
3. Hold down both volume buttons and the power button.
Method 3: ADB (for advanced users.)
1. Download the android SDK from http://developer.android.com/sdk/index.html (NOT THE .EXE VERSION)
2. Drag it into the ROOT (top-most directory) of your hard drive.
3. Open the Command Prompt and navigate to the tools folder in the android SDK.
4. type adb shell then press enter
5. type adb reboot download then press enter
Method 4: Download Mode JIG
search for captivate JIG

no key combos work, and i tried adb, i dont have a usb jig (would be nice) but do i need one if odin recognizes it already?

1. Adb only work from inside the OS with usb debugging on. So that's out of the question
2.If the phone isn't in download mode it won't initiate download protocol and odin will hang.
My phone is recognized by odin in all modes except completely off, but will only work if in download mode.
If no combinations work a jig will do it.

Sorry forgot to say that adb wouldn't work
Sent from my SAMSUNG-SGH-I897 using XDA App

buy this, it will solve your problem in seconds:
http://cgi.ebay.com/ws/eBayISAPI.dl...44426&ssPageName=STRK:MESELX:IT#ht_723wt_1139

mengbo said:
buy this, it will solve your problem in seconds:
http://cgi.ebay.com/ws/eBayISAPI.dl...44426&ssPageName=STRK:MESELX:IT#ht_723wt_1139
Click to expand...
Click to collapse
probably going to go with that, i tried a teardrop no soldering jig, it just made me frustrated and put my phone into worse condition than the phone-!-comp state lol

dsilvan55 said:
Sorry forgot to say that adb wouldn't work
Click to expand...
Click to collapse
Why even mention adb then, let alone give instructions and a link?
OP
Take the battery out, hold both volume buttons, plug in usb cable, keep holding volume buttons and insert the battery.
Try that to get to download mode.
once in download mode, put the back cover on so the battery doesn't fall out during the odin flash.

studacris said:
Why even mention adb then, let alone give instructions and a link?
OP
Take the battery out, hold both volume buttons, plug in usb cable, keep holding volume buttons and insert the battery.
Try that to get to download mode.
once in download mode, put the back cover on so the battery doesn't fall out during the odin flash.
Click to expand...
Click to collapse
not working, im gonna have to get a jig, thanks though

I tried the jig will do you right though. I promise.

Dont flash a PIT. You don't need to flash PIT, PBL or SBL. They can only make things worse. Phone--/!\--PC means an incomplete flash was performed... It's been marked as not complete in the Params.lfs. Just complete a flash and you should be rollin'. Try flashing a modem.

AdamOutler said:
Dont flash a PIT. You don't need to flash PIT, PBL SBL. They can only make things worse. Phone--/!\--PC means an incomplete flash was performed... It's been marked as not complete in the Params.lfs. Just complete a flash and you should be rollin'. Try flashing a modem.
Click to expand...
Click to collapse
Wow, learned something ... Thought it would take atleast a kernel if not a whole stock .tar or odin 1 one click.
Didn't know that just any flash would to it... Interesting.

It depends... As long as the kernel wasn't damaged, it will actually try to boot.... Dunno how WELL it will boot, but it won't give you the triangle at least.

Ah ... I see

yeah, I posted a youtube video about UART on a Captivate... In the video, about midway through, I pulled the USB cable while flashing a modem. It soft-bricked the phone. It's not that the phone was damaged, but marked as unbootable because it was in the process of flashing. Where things go wrong is if there's a bad USB cable used. In that case, corrupted data may be on the phone.

AdamOutler said:
Dont flash a PIT. You don't need to flash PIT, PBL or SBL. They can only make things worse. Phone--/!\--PC means an incomplete flash was performed... It's been marked as not complete in the Params.lfs. Just complete a flash and you should be rollin'. Try flashing a modem.
Click to expand...
Click to collapse
Wow this actually helped a lot, i tried flashing again and it worked, without it being in dlm, Thanks! I still bought the jig though and im sure it will come in handy.

Runnin Andromeda 3 now, thanks!

ICSSGS Brick - Help Wanted

~ Started with Froyo 2.3.X (?), on a Rogers Phone
~ Tried to install Clockwork Mod - FAIL - 3e error.
~ Read solution - ODIN back to 2.1. (I897UCJF6-final-OCD-REV0)
~ Discover - with no warning mentioned in "guide" - that I have lost the 3-button functionality...
~ Recovery Mode / Download mode no longer accessible. Phone booting as ATT now, but fully functional.
~ Teach myself Android SDK. (N.B. adb no longer located in tools dir of SDK, installed from addt'l pkgs) - reboot requires Root?
~ Root phone with SuperOneClickv2.3.3-ShortFuse.
~ c:\android\platform-tools\adb shell
$su reboot recovery
~ Phone installs CWM no problem.
~ Buttons work on next reboot and bring up CWM. Factory Wipe, Wipe Cache, Wipe Davlik
~ CWM to install ICS_4.0.3.0(RC2.11)_Captivate_Full.zip
(ROM FIRST, fully intending to follow up with the kernel as instructed)
~ Boot Loop - Rainbow Squares flushing down a toilet. Buttons don't work again. Can not get to Download or Recovery or CWM (3 hrs now)
Whats next? please no soldering...

... OP states it will bootloop. You need to flash twice. You also should get GB bootloaders since it fixes your 3button issue. Get back in download mode. Doubt this will work but try:
Remove battery
Open Odin
connect phone to computer
Press Vol up+VolDown +insert battery
Use ODIN.
If it doesn't make/buy a jig and next time READ more before you flash.

For download mode, I always:
Start ODIN and plug USB into computer
1. pull and replace battery
2. with phone off, hold both volume buttons (if froyo based) or volume down (GB)
3. Plug USB into phone. see download mode
this ahs worked 100% fo the time.
if the battery icon pops up, then it do the other volume button....

pickupman66 said:
For download mode, I always:
Start ODIN and plug USB into computer
1. pull and replace battery
2. with phone off, hold both volume buttons (if i897 Froyo & gb based) or volume down + power if I9000 gb
3. Plug USB into phone. see download mode
this ahs worked 100% fo the time.
if the battery icon pops up, then it do the other volume button....
Click to expand...
Click to collapse
Fixed
Sent from my ICS powered Captivate

could have at least fixed the spelling too :-/
thanks though, but on item 2, I never touch the power button. just plug in the cord.

Thanks
prbassplayer said:
... OP states it will bootloop. You need to flash twice. You also should get GB bootloaders since it fixes your 3button issue. Get back in download mode. Doubt this will work but try:
Remove battery
Open Odin
connect phone to computer
Press Vol up+VolDown +insert battery
Use ODIN.
If it doesn't make/buy a jig and next time READ more before you flash.
Click to expand...
Click to collapse
Hey PR,
Thanks for the responses, I did read a lot, but did not see it mentioned anywhere that I could lose button functionality, and thus be prevented from getting back into download mode for 2nd flash.
Any ideas where I can buy a jig?
Thanks

The rom doesn't make you loose 3 button, Flashing to a very old JF6 did that. Google layman jig for a how to or google mobiletechvideos.com to buy one.

Just curious, did you try adb reboot download while the phone is booting? It should get to a point where it responds to adb commands. Hell, mine has been stuck on the ATT screen and still responds to adb. Worth a shot.
Sent from my SGH-I897 using Tapatalk

Is my Galaxy Note Bricked?

Ok here is what happened.
- I rooted my galaxy note successfully.
- Installed CWM through the steps described in this forum
- Installed Titanium Backup
- Restored CWM 5.0.0.2 APP with data through Titanium backup (which was from a LG Optimus 2X)
- Pressed Restart into Recovery Mode (Note: I did not FLASH the Clockworkmod Recovery, i simply pressed RESTART INTO RECOVERY)
- Phone asked for super user permission, i gave it
- Phone restarts, is stuck in a black screen with the botton 2 buttons lighting up
- Was stuck there for 5 Min so i took out the battery
- Now phone will not power on... with or without wall charger plugged in.
Is my phone bricked? Is there any way to fix it?
Many thanks.

What about download mode? Can u get in?
Sent from my GT-N7000 using XDA

- Brain wasn't working and restored CWM 5.0.0.2 with data (which was from a LG Optimus 2X)
are you saying you restored from a non note backup image?
take the battery out wait 30 minutes and see if you can get into download mode

Could be probable that your bootloader is replaced, so yeah the chances are that you have soft bricked your phone and yeah there are definitely ways to restore it, so don't worry.
But see if your download mode works. press volume down+home+power all at a time.

i took the battery out for 30 minutes. Put it back in.
tried to activate download mode, there is no response.
normal power on wouldn't work either... sigh

mikescool said:
i took the battery out for 30 minutes. Put it back in.
tried to activate download mode, there is no response.
normal power on wouldn't work either... sigh
Click to expand...
Click to collapse
Do you have a usb jig?

no i don't. should i go find one of those phone fixing shops? they usually would have something like this right?

I did some research on the USB Jig, is it sure to put the phone in download mode for a soft brick?
if so, i can just buy one off ebay or something.

I did some research on the USB Jig, is it sure to put the phone in download mode for a soft brick?
Click to expand...
Click to collapse
Yes... i think you flashed another bootloader which does not support the three button combo. but download mode should still exist. The USB Jig will bring the phone to boot to download mode. It should work... if not, then you have a real bricked note

Try this:
- download and install KIES
- download and install Android SDK
- download and install Odin3
- open CMD (in Windows --> Start and type cmd)
- open Odin3
- remove battery in phone
- connect phone to pc via USB
- reinsert the battery in phone
- type in cmd:
Code:
adb reboot download
- looking for "added" in Odin3 (and Com Port)
- flash a stock rom for the SGN (better 3 parts and with *.pit)

Hi Chris,
Thanks for the suggestion but that didn't work. I guess i'll try the USB Jig tomorrow at a phone fixing place and if that doesn't work i'm not sure what i can do

Can you atleast access recovery mode by pressing volume up, home and power button?
..

I cannot access the recovery/download mode by using those button combo. The phone is totally non-responsive. Screen remains blank and buttons do not light up.

did you ever solve this issue?

so what happened... any update?

Moved To Q&A​
Please post all questions in the Q&A section​