Hi there I got a Samsung captivate SGH-I897 and I got a custom rom installer from Rom Kitchen. I wanted to go back to stock rom but once i get into download mode the phone not loading the rom ODIN stays in DO NOT TURN OFF THE TARGET!please help get out of that and use my phone again!the Base Rom i Used on custom rom is XWJS5 v9.6 with Firebird Kernel
Thank you for your time
close odin 1 click, unplug phone leave it in d/l mode, open odin plug phone back into usb, you should see a com port then like 7 or 3 or something. then hit start. Sometimes I have to repeat process 3 or 4 times before odin works right. if it isnt doing anything unplug it, remove battery put battery back in hold volume buttons down when u plug it back into usb and should go back to d/l mode. make sure odin is opened first.
I ve tried all these the problem is that I am at Phone - ! - PC and its hard to get to Download Mode but after many tries I all of a sudden I get in that mode then nothing more I can do!
Does Odin recognize the phone when you connect the USB cable when your phone is in download mode? Also which OS is your PC running? I was having an issue with Odin not pushing the stock rom and I had to start it as administrator in Win 7 to get it to work.
Sent from my SGH-I897 using XDA App
Yes DOES recognize the phone but not pushing the ROM on it!I am on Windows 7 and i always run ODIN as Admin!
Any ideas?
I've heard Odin can be flaky and may take several attempts before it will work. I would keep trying. Also possibly change which USB port you are using on your computer and see if that helps. I was in this exact same scenario last week. I would turn on the phone and get the computer/phone/exclamation point of death screen. I couldn't get the phone to boot or into download mode without using a JIG. Finally on about the third try Odin worked for me. I started Odin as admin and almost as soon as I plugged in the phone to USB I hit flash and it worked. Best of luck...
Odin is not flaky. It works if you follow instructions. It's the user's fault, not the software.
Anyway, this is probably the ten millionth time I've posted this in the last hour, but here's how to get into download mode if nothing else works. If this doesn't work, you hard bricked your phone and would need a JTAG flash.
Loggik said:
Unplug the phone from the computer and remove the battery, SIM, and external SD if there is one.
1. Open Odin one click.
2. Plug the phone in (without the battery in the phone). Do not press any buttons, especially the power button.
3. Press and hold the volume rocker (holding down both volume up and down).
4. Insert the battery while holding the volume rocker.
5. The phone should boot into download mode. You can then let go of the volume rocker.
Now wait 30 seconds (if you press "Start" too soon, it will not work). Then press "Start" and your flash should finish.
Click to expand...
Click to collapse
my phone is in download mode but odin hung once i unplugge and plugged back in ever since phone isnt see by odin or pc?
Yes, as I stated in my post above; you must reboot your phone every single time you go into Download mode. What I mean by that is that if you go into Download mode and plug your phone in, then unplug it, you cannot plug your phone back in unless you reboot your phone.
Loggik said:
Yes, as I stated in my post above; you must reboot your phone every single time you go into Download mode. What I mean by that is that if you go into Download mode and plug your phone in, then unplug it, you cannot plug your phone back in unless you reboot your phone.
Click to expand...
Click to collapse
if youre reffering to me my cappy was bricked all it will do now is go into download mode if i do the 3 resistor trick to force it to but then its not seen by pc now
leo5111 said:
if youre reffering to me my cappy was bricked all it will do now is go into download mode if i do the 3 resistor trick to force it to but then its not seen by pc now
Click to expand...
Click to collapse
Didn't realize that you weren't the OP. Regardless, I was referring to you.
Anyway, this is a more serious case than I thought. Have you used the AIO Captivate Tool? If so, did you install the LibUSB drivers? Those will disable Odin from working (I'm probably going to PM Bay_wolf sometime soon about that...).
Do get everything working again:
Plug the phone in while it's in Download mode. Open the start menu, right click on "Computer", and click "Manage". In the left sidebar, select "Device Manager".
There will be a dropdown labeled "LibUSB Devices" or something with the word libusb in it. Find that dropdown, right click the Samsung USB Device or whatever it's called and select "Update Driver Software...". Then select "Search automatically for updated driver software."
An alternative is to just use the "Flash to Stock" option in the AIO tool. This and the above is assuming that you had used the AIO Tool and installed the LibUSB drivers previously. If you have not, then you may have to try and re-install the Samsung drivers. If that doesn't work, ask to borrow a friend's computer for now to flash back to stock, because this happened to me before and I didn't know how to fix it, but I was about to re-install Windows anyway so I never figured it out.
im on xp and pc sees my cappy but odin execution 1.00 is stuck on examing files is there another version i should be trying? if it helps this is what i was trying to get off my phone when the crap hit the fan http://forum.xda-developers.com/showthread.php?t=940330 and i tried to put paragon 6 on and it kept erring because i needed to do a odin job first on it
I finally managed to turn my phone on last nigh by doing the following:
1.Open Odin
2.Get in download mode (it took me many tries but finally I made it)
3.Disconnect phone
4.Reconnect phone
5.Choose the PIT file
6.Uncheck Auto Reboot
7.Hit Start
After that I took out the battery put it back again and power up.the phone will boot but not show the main screen it will only vibrate!then i used the AIO pack to put it back in recovery mode and i reinstalled the Custom Firmware I was using. Now is on and working again!I really dont know now if I can flash back to stock!
niderium said:
I finally managed to turn my phone on last nigh by doing the following:
1.Open Odin
2.Get in download mode (it took me many tries but finally I made it)
3.Disconnect phone
4.Reconnect phone
5.Choose the PIT file
6.Uncheck Auto Reboot
7.Hit Start
After that I took out the battery put it back again and power up.the phone will boot but not show the main screen it will only vibrate!then i used the AIO pack to put it back in recovery mode and i reinstalled the Custom Firmware I was using. Now is on and working again!I really dont know now if I can flash back to stock!
Click to expand...
Click to collapse
did you use thee pitfile came with odin in the all in one or did you select another pitfile if you used a differnt pitfile then comes with odin 1.00 that might be my issue
No no I dont use this on I use one I had on my PC.
I think the problem is a write protection as I can see when i connect the phone it displays a CDROM drive when I click on it, opens ok but I cant write anything on the phone.and every time I try to use ODIN to flash to stock it stays in DO NOT TURN OFF THE TARGET and nothing happens!
Any ideas on how to get back to stock firmware?
Related
I decided to upgrade to Cog2.2beta5 from Cog2.1.4 today using ROM Manager. Everything seemed to go well but after install and reboot all I got was a black screen and subsequent reboots landed me at the same result.
So I thought restoring back to stock with Odin One Click from this forum, the one with all the ROM files built right in, was the best next step. I downloaded Odin and followed the instruction to the T and it got stuck at the PIT step. After a few attempts at it now my phone won't even power on. I've let it sit without a battery in for several minutes and even charged it on a wall charger for 30 minutes just to make sure it wasn't a dead battery. Still won't power on or respond at all.
I'm fairly new to all of this... Any ideas on what would cause a total melt down of the phone to the point of not even powering on? It has been flawless for me since launch.
Didi you download the drivers? also did you unplug the phone while doing the flash>/
pull battery sim and sd if you have one
Wait a minutes or so
plug in USB
hold vol up and down
put in battery
If the phone does not immediately go to download mode, you have a fancy paper weight that doesn't even weigh that much.
chibixzero said:
Didi you download the drivers? also did you unplug the phone while doing the flash>/
Click to expand...
Click to collapse
I did download the drivers and from everything I could see, my system and Odin recognized the phone without issue.
I had to unplug it during the process because the process froze in the same spot for well over an hour. I didn't see any other choice.
l7777 said:
pull battery sim and sd if you have one
Wait a minutes or so
plug in USB
hold vol up and down
put in battery
If the phone does not immediately go to download mode, you have a fancy paper weight that doesn't even weigh that much.
Click to expand...
Click to collapse
Guess it's a paper weight then because the phone won't power up at all let alone go into download mode.
Thanks for your time guys.
sounds like you might have done exactly what i did with my first captivate and yes it IS bricked! i know you will read "its impossible" to do that but i "thought" i followed the correct steps and flashed only a pit file. what it does is repartition your file system but apparently nothing is added after that...
not sure what steps you took on odin but it sounds like you got the same error i did and then the same issue so im going to assume the same thing has happened here...sorry matey
tnt533 said:
Guess it's a paper weight then because the phone won't power up at all let alone go into download mode.
Thanks for your time guys.
Click to expand...
Click to collapse
I had mine hosed for a while and this is what I did to get it back.
When it is unplugged and everything is out of the phone (sd, sim, batt) , hold the power button down for 10 sec, then release.
Put in battery, hold vol up + vol dwn, Plug into different usb port, Plug into phone.
That should get you into download mode
Mine did this too and the steps mentioned fixed it for me
Sent from my SAMSUNG-SGH-I897 using XDA App
I too accidently only wrote the pit file and it wouldn't do anything at all just blank screen . Make sure you remove everything open Odin one click, plug in your phone with the USB cable, hold down volume up and down and plug in battery it should start in download mode. It does work.
Sent from my SAMSUNG-SGH-I897 using XDA App
samsung captivate wont turn on after failed odin update
got an at&t samsung captivate. I want to try on something new with this phone so I search on some articles on how change rom..
first got the download mode showing on my phone then i connect it to pc with odin3 already started, I click on start button however my phone just suddenly shut off. tried turning it on but nothing happens. tried 3 key combos still wont turn on, tried removing sim, sd and batt connect phone without batt then pushing vol up and down then inserting batt still nothing. tried charging it, no light came up, still wont turn on..i would like to ask some help if how to turn my phone back on..
sorry for bad English
thank you
boangon said:
got an at&t samsung captivate. I want to try on something new with this phone so I search on some articles on how change rom..
first got the download mode showing on my phone then i connect it to pc with odin3 already started, I click on start button however my phone just suddenly shut off. tried turning it on but nothing happens. tried 3 key combos still wont turn on, tried removing sim, sd and batt connect phone without batt then pushing vol up and down then inserting batt still nothing. tried charging it, no light came up, still wont turn on..i would like to ask some help if how to turn my phone back on..
sorry for bad English
thank you
Click to expand...
Click to collapse
What did you try to flash with Odin? (with version, variant #, with/without bootloaders)
What was the Odin log?
nothing, no roms yet. i was in the first part of the instruction. this is what i follow
1. Download and install the correct drivers below (mac and linux don't need drivers)
2. Plug in your usb cable to your phone and computer
3. Open Odin
4. Enter Download Mode (see below)
5. Click Start
6. Be Patient, the first boot will take a while
where can i find the odin logs?
My Captivate became the brick by failure of the recovery.
The screen remains black.
The power button and volume buttons no response.
In Japan, I cannot repair it.
I am not a member of AT&T.
Please teach it if know the shop repairing other than AT&T.
step one. get odin3 from http://forum.xda-developers.com/showthread.php?t=818439
step two install drivers if you dont already have the drivers on your computer, there are manual driver install tutorials online, google it
3. extract files and start odin.exe
4. put .pit file in the slot labled pit
5. put .tar file in the pda slot
6. plug usb data cable into computer, not into phone yet.
7. pull battery and put it back in,
8. hold volume up and volume down, insert data cable into phone and continue to hold the volume up+down buttons for at least 5 seconds. it should be in download mode. normally you have a yellow sign with a robot holding a shovel but i once had a black screen and odin still saw the device
odin will light up a box showing you are connected and the text should also indicate you are connected.
if not you may need to take other measures for download mode see here http://forum.xda-developers.com/showthread.php?t=829492&page=3
9. once you are in download and odin sees the phone hit start to flash the phone.
if the flash is not successful try to use http://forum.xda-developers.com/showthread.php?t=731989&highlight=odin+click+stock+rom+jf6 instead, master clear if at all possible
It is not a download mode.
Odin3 many times I used to change the ROM, all of which succeeded.
This time, ClockWorkMod Recovery in ROM from microSD installed, black screen freezes when it reboot.
From then on, things that can both download mode button.
Also, USB does not respond to the command prompt can also ADB.
Thank you.
vv.jp said:
Odin3 many times I used to change the ROM, all of which succeeded.
This time, ClockWorkMod Recovery in ROM from microSD installed, black screen freezes when it reboot.
From then on, things that can both download mode button.
Also, USB does not respond to the command prompt can also ADB.
Thank you.
Click to expand...
Click to collapse
try building the adapter in the thread i posted, supposedly it forces download mode. also it is posible to be in download mode with a screen that is black, it happened to me once, try to flash it anyway.
you might need to take a trip to akihabara to build the jig but it's worth it i think.
also if the phone starts to a black screen then master clear it with odin one-click on that screen.
thanks for the info. saved my phone. thanks
Thank you for giving good advice!!
Thank you for giving good advice.
I try a method of "jig".
Thanks!!
Dani897 said:
step one. get odin3 from http://forum.xda-developers.com/showthread.php?t=818439
step two install drivers if you dont already have the drivers on your computer, there are manual driver install tutorials online, google it
3. extract files and start odin.exe
4. put .pit file in the slot labled pit
5. put .tar file in the pda slot
6. plug usb data cable into computer, not into phone yet.
7. pull battery and put it back in,
8. hold volume up and volume down, insert data cable into phone and continue to hold the volume up+down buttons for at least 5 seconds. it should be in download mode. normally you have a yellow sign with a robot holding a shovel but i once had a black screen and odin still saw the device
odin will light up a box showing you are connected and the text should also indicate you are connected.
if not you may need to take other measures for download mode see here http://forum.xda-developers.com/showthread.php?t=829492&page=3
9. once you are in download and odin sees the phone hit start to flash the phone.
if the flash is not successful try to use http://forum.xda-developers.com/showthread.php?t=731989&highlight=odin+click+stock+rom+jf6 instead, master clear if at all possible
Click to expand...
Click to collapse
Hard bricked my phone. wont even turn on now
shae509 said:
Hard bricked my phone. wont even turn on now
Click to expand...
Click to collapse
Maybe not. I thought I was there too.
Keep trying the battery pull method. It took several times before it finally worked for me.
Here's one version:
http://forum.xda-developers.com/showpost.php?p=9024244&postcount=7
but you can try other button combinations (like just volume up, or just volume down).
If you don't see anything on your screen, that doesn't mean it hasn't worked. Sometimes the graphic for download mode gets screwed up so the screen will still be black, but ODIN will still recognize the phone.
If you really are hard bricked, then you need jtag service. MobileTechVideos can do it for you.
shae509 said:
Hard bricked my phone. wont even turn on now
Click to expand...
Click to collapse
Make/buy a Jig (forces the phone in to Download mode) if that doesn't work then like startngate said you will need a Jtag to fix it.
thanks for the reply i took it into a samsung certified repair tech here in the city he has a jtag machine. odin wouldnt recognize my device at all
I am running Firefly 2.05. I was attempting to reset with odin. I started my phone in download mode and I forgot to enable usb debuging. Odin of course wouldn't recognize the phone. I couldn't get it to power off so I pulled the battery. Now when it starts I have a black screen with a computer and phone icon with an exclaimaton point in the middle. I can't get the phone to boot up. As far as I know the OS wasn't changed; it's just permanently stuck with this logo on the screen. I tried downloading this sdk and adb won't recognize the device either. Is there anything I can do? Thanks...
Heres what you do.
1) Pull the battery so you KNOW the phone is off.
2) Put the battery back in
3) Hold down BOTH volume keys at the same time. Do not let go and do not touch the power button
4) Plug in the usb cable while holding down the volume keys, the device should turn on and go into download mode
5) Start odin and go about your business
Followed the directions exactly and get the same phone with a computer and an exclamation point.
Try the above, then try the steps in this video.
http://www.youtube.com/watch?v=2fMk0PhA_qc
If those don't work, my download JIG will. It's only $10 with free shipping. You can buy one HERE...
Thanks for all the help guys. I think I am going to need a JIG. Did I need USB debugging for the Odin clear or is just being in download mode all it needs? When I did my initial install of Firefly the Odin one click and master clear worked fine, but I can't remember if I had debugging mode on.
Subv3rsion said:
Thanks for all the help guys. I think I am going to need a JIG. Did I need USB debugging for the Odin clear or is just being in download mode all it needs? When I did my initial install of Firefly the Odin one click and master clear worked fine, but I can't remember if I had debugging mode on.
Click to expand...
Click to collapse
Download mode doesnt even know/care if debugging is on or not. so, no.
Are you sure you are holding both volume buttons down all the way?
Also, make sure your external sd (if you have one) and SIM card are taken out.
Make sure that the phone isn't plugged in when you pull out the battery (the phone can stay on without the battery if you are plugged into the computer)
Not really sure how this could have happened by just pulling the battery while in download mode if nothing was being done to the phone at the time. Yesterday, while I was trying to get odin to recognize my phone through a VM I must have pulled the battery while in DL mode at least 10 times and had no problem)
Edit:
Proper odin steps:
1. Install drivers for your os given in the original odin3 post (or the computer won't recognize your device while it's in DL mode and therefore will never get to odin)
2. Open odin3 (needs to be open before you plug in the phone)
3. Turn off phone, unplug from charger/computer and pull out battery, SIM, SD cards.
4. Replace battery (phone should still be completely off)
5. Hold both volume buttons and plug in the usb cable to your phone (should already be plugged into your computer)
- Need to keep holding the two volume buttons down tight until the download mode screen comes up (should be pretty much instantly) -
Those are the steps I follow to the letter whenever I use odin (about once a week)
build a jig yourself, or buy one. it will get your into the download mode.
I managed to get it into download mode. Odin shows a com port but the start and master clear options do nothing. I click the button and they grey out, but nothing happens as far as download progress. Any ideas what to try next?
Did you try multiple ports
I finally got it working. It required a JIG to get it into download mode and then starting Odin as windows administrator allowed it to finally do the flash and master clear. Thanks for everyones help; I really appreciate it!
i had to do the 3 resisitor home made trick to get the download shovel guy back but what do i wipe it with to put new rom on?
Wipe it with ODIN. This will get you back to stock AT&T build. You can then follow the steps on this tutorial to install a new ROM:
http://forum.xda-developers.com/showthread.php?t=884364
The download for ODIN is in that page.
Frank the Funkasaurus Rex said:
Wipe it with ODIN. This will get you back to stock AT&T build. You can then follow the steps on this tutorial to install a new ROM:
http://forum.xda-developers.com/showthread.php?t=884364
The download for ODIN is in that page.
Click to expand...
Click to collapse
odin first hung forever at processing files then finaly 1 time it finaly went past that and said looking at pit files and sat there forever i unplugged usb now when i plug back in pc doesnt see it or odin or anything but the shovel guy is still on screen
are you using ODIN 1 click or the original ODIN where you have to select the PIT and PDA files you want to flash?
are you starting ODIN first, before you plug in your phone and running as admin?
just tried as admin with odin execution v1.00 plugged in after odin was open no go
no go as in ODIN doesn't recognize your phone?
From what I understand, you tried the first flash and it got to the PIT file and then you unplugged it once it froze. Since then, you haven't rebooted your phone.
One thing first: You cannot plug your phone in after it is in Download mode and have Odin work. You must put your phone into Download mode after both Odin is open and the phone is plugged in.
Now; to get your phone into download mode.
Unplug the phone from the computer and remove the battery, SIM, and external SD if there is one.
1. Open Odin one click.
2. Plug the phone in (without the battery in the phone). Do not press any buttons, especially the power button.
3. Press and hold the volume rocker (holding down both volume up and down).
4. Insert the battery while holding the volume rocker.
5. The phone should boot into download mode. You can then let go of the volume rocker.
Now wait 30 seconds (if you press "Start" too soon, it will not work). Then press "Start" and your flash should finish.
im in downloader mode now but on captivate all in one or just odin exeuction 1.00 it hangs at examing files
dont ask me how, because im not even sure how i did it but after much trial and error im back in the saddle again, flashed back to stock, then put paragon 6 on so im all set again...
I did the Odin one click everything was going great everything matched up. But after giving it the command to reboot Odin did not recognize my phone again. Went back in command promt put adb devices to see if my phone was still attached and it wasn't. KNow my phone is stuck on the down load screen what can i do?
So your phone is stuck on the screen after you finished taking it back to stock on download screen after the blue bar on the screen went all the way across and odin said complete or whatever in the box then you should just be able to hold the power button until the ATNT screen comes up or If you can't get the phone to successfully boot try a different usb port or computer or another method to get into download i use the (hold volume up and down and with the phone end of the usb curb plugged into the phone then plug the usb end into the computer should go straight into download... to see if odin will pick you up then, after that just redo odin one click
no odin never reconized it again to give me the blue bar to put it back to stock. Just stuck saying downloading. can I just turn the phone off and go into recover.
bossman1225 said:
no odin never reconized it again to give me the blue bar to put it back to stock. Just stuck saying downloading. can I just turn the phone off and go into recover.
Click to expand...
Click to collapse
Yes you should be able to just turn it off and go into recovery, also then your phone should still be the same as before since odin never did anything to it and you might just need the drivers for the captivate or if you already do uninstall them then reinstall if that doesn't work try a different usb port and then try a different computer
thank try again tommorrow