Related
Hello Guys i flashed the Germany Version of 4.3 lte last night and in doing so i have Temporarily killed my Phone.
I have tried all the Recoveries processes via Kies and Odin and i am having no luck.
I think the reason why it won't flash is because the Germany 4.3 is a Newer Version than the Stock 4.1.2.
When i'm in Odin i get sboot.bin Fail when trying to Flash the Latest Stock rom. I am able to Flash the Germany 4.3 again and that flashes but then the Phone Stays on the Samsung Flash Screen.
Could someone please Help? I have been on with this for Hours now. I think what i need is a 4.3 Version of any rom in Odin .tar format so i can at least get the phone to boot up and then maybe i can get CWM Recovery on there and flash a Stock rom that way.
Thanks in Advance
You have to remove sboot.bin and tz.bin when downgrading. Be careful, downgrading will give you Knox warranty void 0x1!
Sent from my GT-I9305 using xda app-developers app
.NetRolller 3D said:
You have to remove sboot.bin and tz.bin when downgrading. Be careful, downgrading will give you Knox warranty void 0x1!
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
I have already seen that Message in Tiny Writing. What does that mean if i get that and how do you remove sboot.bin and TZ.bin
Do i remove them from the Stock 4.1.2 or the Germany 4.3?
My head is well and truely done in. I was up till 5am trying to fix it and then when i woke i went straight back to it and i still havn't got it working.
Thanks for your help in advance.
marti4578 said:
I have already seen that Message in Tiny Writing. What does that mean if i get that and how do you remove sboot.bin and TZ.bin
Do i remove them from the Stock 4.1.2 or the Germany 4.3?
My head is well and truely done in. I was up till 5am trying to fix it and then when i woke i went straight back to it and i still havn't got it working.
Thanks for your help in advance.
Click to expand...
Click to collapse
I am in the same boat if u found a solution help me also
Currently i flashed philz recovery upon which i have flashed tgp 11.30 but have no imei baseband.
marti4578 said:
I have already seen that Message in Tiny Writing. What does that mean if i get that.
= warranty void and no way so far to remove the count .
Click to expand...
Click to collapse
AMoizK said:
I am in the same boat if u found a solution help me also
Currently i flashed philz recovery upon which i have flashed tgp 11.30 but have no imei baseband.
Click to expand...
Click to collapse
Have you got any efs backup made by yourself? Or have you ever used boeffla kernel or any other that backups efs partition?
Hbohd said:
Have you got any efs backup made by yourself? Or have you ever used boeffla kernel or any other that backups efs partition?
Click to expand...
Click to collapse
Hello I don't have any EFS Backups done by Myself and i have never used Boeffla Kernel or any other Backup. I am so at my Witts end it unreal.
I have tried to do Kies recovery and i am back at the Firmware Upgrade Encountered an Issue. Please select recovery mode in Kies and Try again.
I have no idea which way to go or what to do. I know it will be fixed but i have little Faith at the Moment.
Thanks for your help in advance.
marti4578 said:
Hello I don't have any EFS Backups done by Myself and i have never used Boeffla Kernel or any other Backup. I am so at my Witts end it unreal.
I have tried to do Kies recovery and i am back at the Firmware Upgrade Encountered an Issue. Please select recovery mode in Kies and Try again.
I have no idea which way to go or what to do. I know it will be fixed but i have little Faith at the Moment.
Thanks for your help in advance.
Click to expand...
Click to collapse
THE kies frimware intilition doesnt work as you have 4.3 bootloader and knox blocks older boot loader
dont worry when 4.3 becomes available in your area it wont have to downgrade and ultimately this method will work but still things are looking pretty bad dor the intermediatory days.
PS is ther anyway to restore baseband imei without any backup
AMoizK said:
THE kies frimware intilition doesnt work as you have 4.3 bootloader and knox blocks older boot loader
dont worry when 4.3 becomes available in your area it wont have to downgrade and ultimately this method will work but still things are looking pretty bad dor the intermediatory days.
PS is ther anyway to restore baseband imei without any backup
Click to expand...
Click to collapse
What if i download the Germany Version again and try flashing. I thought it would of worked? I am now in this situation surely the Country it comes from wouldn't make a difference? Could someone take the Germany 4.3 and make it a Working Version .tar file to flash with Odin3?
marti4578 said:
What if i download the Germany Version again and try flashing. I thought it would of worked? I am now in this situation surely the Country it comes from wouldn't make a difference? Could someone take the Germany 4.3 and make it a Working Version .tar file to flash with Odin3?
Click to expand...
Click to collapse
I ment through kies.
Hello Guys i have Fantastic News!!
I have no idea what i did different, However i have reflashed the German 4.3 on my GT-I9305 and this time to my Total Surprise it worked!!
I wish i could say what i did and it worked but i have absolutely no idea what was done differently.
Thanks all for your Help.
I will say i installed the drivers manually and just on the off chance i flashed it again with the file i downloaded last Night. I also flashed a recover trying to get it to load a recover so i could flash a zip file.
marti4578 said:
Hello Guys i have Fantastic News!!
I have no idea what i did different, However i have reflashed the German 4.3 on my GT-I9305 and this time to my Total Surprise it worked!!
I wish i could say what i did and it worked but i have absolutely no idea what was done differently.
Thanks all for your Help.
I will say i installed the drivers manually and just on the off chance i flashed it again with the file i downloaded last Night. I also flashed a recover trying to get it to load a recover so i could flash a zip file.
Click to expand...
Click to collapse
Which file can u specify pls and also which recovery also is wifi and data working
AMoizK said:
Which file can u specify pls and also which recovery also is wifi and data working
Click to expand...
Click to collapse
which file????:crying:
AMoizK said:
which file????:crying:
Click to expand...
Click to collapse
Please read the rules .
JJEgan said:
Please read the rules .
Click to expand...
Click to collapse
Can u point me to the rules
AMoizK said:
Can u point me to the rules
Click to expand...
Click to collapse
http://forum.xda-developers.com/announcement.php?f=256
5. Create a thread or post a message only once.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer. (Also refer to Rule 16)
Finally
I am so feeling sucessful right now although i didnt got 4.3 but i was sucessful in getting my imei and baseband and network back.:good:
Sorry for the late response but when you get stuck on the Samsung boot screen all you have to do is boot into Recovery and do a Factory Reset and Wipe Cache.
Another thing to remember is to flash the modem for your country otherwise you might accidently disable some frequencies and enable other useless ones.
xkwizt said:
Sorry for the late response but when you get stuck on the Samsung boot screen all you have to do is boot into Recovery and do a Factory Reset and Wipe Cache.
Another thing to remember is to flash the modem for your country otherwise you might accidently disable some frequencies and enable other useless ones.
Click to expand...
Click to collapse
Doesn't work I will syill be stuck at boot screen
AMoizK said:
Doesn't work I will syill be stuck at boot screen
Click to expand...
Click to collapse
Which 4.3 update did you flash? I used the DBT German one.
Did you flash the right modem too? It worked for me and i was using a i9305T. All i did was flash the latest modem (from the brand of phone i have which is Telstra) and did a wipe data and wipe cache.
Hi, I followed the guide to install CWM and it seemed to go fine, but when I power on the phone and tap the vol-down key nothing happens, I do get the vibrations as I'm doing it though. Is CWM really necessary to install a custom rom? Cos I might just skip it.
You can't flash a custom rom without cwm recovery.
Sent from my C2104 using XDA Free mobile app
karthikys1 said:
You can't flash a custom rom without cwm recovery.
Sent from my C2104 using XDA Free mobile app
Click to expand...
Click to collapse
O lol, I guess I need to solve this then. I thought I just used FlashTool to flash the rom and viola, rom is on.
Does anyone have any ideas what I might be able to try to figure out why CWM isn't working? Any way to see if CWM is actually on my phone? (Maybe it's just not there, rather then not working).
Edit: Rom Manager seems to think I have CWM installed, also I did a Nandroid Backup which seemed to be configured to use CWM so I don't know if it's there or not, or working or not
Which guide did you follow? And how did you make a Nandroid Backup?
I followed this guide.
I downloaded Nandroid Backup Root, it created the backup without rebooting the phone, so it never needed to boot into CWM.
Astralogic said:
I followed this guide.
I downloaded Nandroid Backup Root, it created the backup without rebooting the phone, so it never needed to boot into CWM.
Click to expand...
Click to collapse
That's what I thought. The fact that it can create a backup doesn't mean it has a recovery installed, it doesn't use a recovery to create it. If the LED is lighting up at boot, and it is vibrating, and it doesn't get back in, I don't know what the problem would be. I'd try reinstalling CWM, and FYI, you should use V8; V9 has issues.
At the very least, if it really is installed, you should have a "recovery.tar" and "chargemon" file in /system/bin/.
Antiga Prime said:
That's what I thought. The fact that it can create a backup doesn't mean it has a recovery installed, it doesn't use a recovery to create it. If the LED is lighting up at boot, and it is vibrating, and it doesn't get back in, I don't know what the problem would be. I'd try reinstalling CWM, and FYI, you should use V8; V9 has issues.
At the very least, if it really is installed, you should have a "recovery.tar" and "chargemon" file in /system/bin/.
Click to expand...
Click to collapse
I don't have those files so CWM is not installed. I can't find v8 of CWM for Xperia T but I found this file "CWM4XperiaT_v8i_JB.zip", is that it?
Astralogic said:
I don't have those files so CWM is not installed. I can't find v8 of CWM for Xperia T but I found this file "CWM4XperiaT_v8i_JB.zip", is that it?
Click to expand...
Click to collapse
It clearly says "Xperia T" in the name of that file... yes, that's it. Now I'm wondering what you installed, if you didn't install that one, or V9.
Antiga Prime said:
It clearly says "Xperia T" in the name of that file... yes, that's it. Now I'm wondering what you installed, if you didn't install that one, or V9.
Click to expand...
Click to collapse
V8 works perfectly, it's installed fine.
I am going to follow this guide to install cyanogenmod, do I need to obtain a bootloader unlock code? Or should I just skip right to installing the ROM?
Edit: Oops forgot the link: http://wiki.cyanogenmod.org/w/Install_CM_for_mint
Astralogic said:
V8 works perfectly, it's installed fine.
I am going to follow this guide to install cyanogenmod, do I need to obtain a bootloader unlock code? Or should I just skip right to installing the ROM?
Edit: Oops forgot the link: http://wiki.cyanogenmod.org/w/Install_CM_for_mint
Click to expand...
Click to collapse
First of all, yes, you need an unlocked bootloader. You can't flash custom kernels on a locked bootloader. Secondly, I've never tried that tutorial (I have a TX), but I'm assuming it should work fine, but, personally I'd either go with FXP, or one of the OMNI builds here in XDA, since, as far as I know, developers here have more fixes than what I've seen on FXP and/or CM.
Also, there are a easier ways to flash your ROM, since you already have a custom ROM. I don't think it's necessary to have to fastboot the kernel first.
Edit: The Carbon ROM I'm on also has a T version. The reason I'm on this ROM (and previously OMNI) was because FXP/CM roms have/had a battery drain that was never fixed, something that was fixed here on XDA.
Antiga Prime said:
First of all, yes, you need an unlocked bootloader. You can't flash custom kernels on a locked bootloader. Secondly, I've never tried that tutorial (I have a TX), but I'm assuming it should work fine, but, personally I'd either go with FXP, or one of the OMNI builds here in XDA, since, as far as I know, developers here have more fixes than what I've seen on FXP and/or CM.
Also, there are a easier ways to flash your ROM, since you already have a custom ROM. I don't think it's necessary to have to fastboot the kernel first.
Edit: The Carbon ROM I'm on also has a T version. The reason I'm on this ROM (and previously OMNI) was because FXP/CM roms have/had a battery drain that was never fixed, something that was fixed here on XDA.
Click to expand...
Click to collapse
There's a problem My bootloader is not unlockable... does this mean I've been wasting my time?
Edit: There is this guide, it makes no mention of unlocking the bootloader so it might work?
Astralogic said:
There's a problem My bootloader is not unlockable... does this mean I've been wasting my time?
Edit: There is this guide, it makes no mention of unlocking the bootloader so it might work?
Click to expand...
Click to collapse
No, that tutorial won't work. Never follow a guide for flashing ROMs that wasn't meant for your phone. Your phone didn't even exist yet when that guide was written.
If you can't unlock your bootloader then there is no way you'll ever be able to flash a custom ROM, because, like I mentioned earlier, custom ROMs have custom kernels, and custom kernels need an unlocked bootloader.
I wouldn't consider it a waste, it's always useful to have a recovery installed; with it you can at the very least backup and restore, flash deodexed/zipaligned stock ROMs, such as this one, flash files, and even have access to ADB if your phone doesn't boot up, which can save you from having to wipe everything, etc., so not a complete waste of time.
Antiga Prime said:
No, that tutorial won't work. Never follow a guide for flashing ROMs that wasn't meant for your phone. Your phone didn't even exist yet when that guide was written.
If you can't unlock your bootloader then there is no way you'll ever be able to flash a custom ROM, because, like I mentioned earlier, custom ROMs have custom kernels, and custom kernels need an unlocked bootloader.
I wouldn't consider it a waste, it's always useful to have a recovery installed; with it you can at the very least backup and restore, flash deodexed/zipaligned stock ROMs, such as this one, flash files, and even have access to ADB if your phone doesn't boot up, which can save you from having to wipe everything, etc., so not a complete waste of time.
Click to expand...
Click to collapse
Ok, well, I learned a bit in the process, and I still have an Xperia SP bootloader to unlock, then flash cyanogenmod, so I'm in a better position to handle that now, thanks for all the help guys.
You will get the KNOX bootloader if you flash this.
YOU CANNOT UNDO THIS, ITS PERMANENT. FLASHING ANYTHING UNOFFICIAL AFTER FLASHING THIS TAR WILL VOID YOUR WARRANTY
Just the NG2 FULL stock tar.
Do NOT rename the tar file. Even though it may be convenient to do so, Odin may fail the md5 check for no reason.
(L720VPUFNG2_L720SPTFNG2_L720VPUFNG2_HOME.tar.md5)
This is NOT ROOTED. Its the original TAR file for people who need an Emergency Recovery for their phones, and dont want to wait hours for it to download from slow file hosts.
Mediafire
Instructions:
1. Download and Extract tar above and download Odin
2. Put phone into download mode (power off, then power button + Volume Down, then volume up when prompted)
3. Open Odin (right click > open as administrator)
4. Load stock tar into the PDA slot
5. Start flashing
6. Grab some popcorn because it will take a while
7. Profit
Is this going to update bootloader into NG2?
Is NG2 bootloader unlocked?
Thank you so much,
will this work on rooted phone?
im looking to put my phone back to unrooted stock. will this flash right on a rooted phone? im guessing it will but just want to make sure.
jam97 said:
Is this going to update bootloader into NG2?
Is NG2 bootloader unlocked?
Thank you so much,
Click to expand...
Click to collapse
Yes this will update you to the new update NG2 and no the bootloader is still locked.
chriseboy said:
im looking to put my phone back to unrooted stock. will this flash right on a rooted phone? im guessing it will but just want to make sure.
Click to expand...
Click to collapse
Yes this will flash right on a rooted phone. The purpose of this is to go back to stock from either rooted or custom rom.
Sent from my SPH-L720
ROMANTiC KiD said:
Yes this will update you to the new update NG2 and no the bootloader is still locked.
Yes this will flash right on a rooted phone. The purpose of this is to go back to stock from either rooted or custom rom.
Sent from my SPH-L720
Click to expand...
Click to collapse
sorry for this stupid question , but will I be able to flash a custom recovery after flashing this image?
Thank you,
Sent from my SPH-L720 using XDA Free mobile app
jam97 said:
sorry for this stupid quastion , but will I be able to flash a custom recovery after flashing this image?
Thank you,
Sent from my SPH-L720 using XDA Free mobile app
Click to expand...
Click to collapse
You will need to re-root the phone after installing this file! Then you will be able to install a custom recovery..
Thanks for putting this on a speedy host. I just downloaded it tonight in under half an hour at my daughter's house, and she doesn't have a particularly fast internet connection.
A quick question - does this file leave your programs intact? Sometimes I like a total wipe (except for my SD card), and start fresh.
Thanks again
my wifi is broken after flashing. won't turn on
rtwrobert10 said:
my wifi is broken after flashing. won't turn on
Click to expand...
Click to collapse
same problem let me know if you find how to fix it
rtwrobert10 said:
my wifi is broken after flashing. won't turn on
Click to expand...
Click to collapse
biscojams said:
same problem let me know if you find how to fix it
Click to expand...
Click to collapse
Reflash it again
Sent from my SPH-L720
rtwrobert10 said:
my wifi is broken after flashing. won't turn on
Click to expand...
Click to collapse
biscojams said:
same problem let me know if you find how to fix it
Click to expand...
Click to collapse
ROMANTiC KiD said:
Reflash it again
Sent from my SPH-L720
Click to expand...
Click to collapse
Same here, I wiped then installed twice, no wifi. I'll try one more time,
DAFTEK said:
Same here, I wiped then installed twice, no wifi. I'll try one more time,
Click to expand...
Click to collapse
Try flashing the ng2 kernel after the install. Thru custom recovery.
https://www.androidfilehost.com/?fid=23622183712458388
Thanks to @ g_ding84
DAFTEK said:
Same here, I wiped then installed twice, no wifi. I'll try one more time,
Click to expand...
Click to collapse
That's odd.
I have installed this NG2 tar file with Odin on 2 different phones and WiFi works perfect on both..
2WhiteWolves said:
Try flashing the ng2 kernel after the install. Thru custom recovery.
https://www.androidfilehost.com/?fid=23622183712458388
Thanks to @ g_ding84
Click to expand...
Click to collapse
Thanks for the reply. I did try one more time and this time I went back in recovery and did the two wipes, went back in to download, opened odin3 3.09 via administrator and removed the auto reboot check. after it finished i manually rebooted and wifi worked.
---------- Post added at 10:06 PM ---------- Previous post was at 10:02 PM ----------
Now I have another problem. I am no longer with sprint and my phone is unlocked from sprint. I have been using the GOLDENEYE rom on Walmart Family Mobile and all was warning well except for sometimes not connecting calls so I thought i go back to stock with this rom. Problem now is I can make calls with the Walmart sim card, put in the APN settings but i am unable to remove the Hands Free Activation nagging.. Is there anyway to make it go away?
DAFTEK said:
[/COLOR]Now I have another problem. I am no longer with sprint and my phone is unlocked from sprint. I have been using the GOLDENEYE rom on Walmart Family Mobile and all was warning well except for sometimes not connecting calls so I thought i go back to stock with this rom. Problem now is I can make calls with the Walmart sim card, put in the APN settings but i am unable to remove the Hands Free Activation nagging.. Is there anyway to make it go away?
Click to expand...
Click to collapse
Have you tried to pull down the notification bar with two fingers > long press on Hands Free icon to see if something is turned on to make it show up on notification bar? If turned on, shut it off. Hopefully it is that simple. If not that simple, I have no clue how to make it stop. Maybe someone else does.
I haven't heard of anyone having that problem.
Yeah, I tried everything, it's part of the rom I think, nothing worked to make it go away..
I just went back to goldeneye rom, all working perfect again. Thanks.
I just flashed this rom through odin and it didn't wipe any of my programs, isn't is supposed to?
RTbar said:
I just flashed this rom through odin and it didn't wipe any of my programs, isn't is supposed to?
Click to expand...
Click to collapse
+1
also I confirm that everything is working great.
RTbar said:
I just flashed this rom through odin and it didn't wipe any of my programs, isn't is supposed to?
Click to expand...
Click to collapse
Nope. it doesn't wipe data unless stated by the OP that it does. It only restores any apps deleted, or reverses any mods made. Example if you are running Aosp and Odin back to stock. You will get bootloop. After Odin always go to stock recovery and do a factory reset to have a clean install.
Sent from my SPH-L720
Wifi didn't work for me on this rom, coming from a custom mf9 rom. So I odin mf9 bootloader package, and then flashed stock mf9 odexed rooted rom, then odin the mf9 kernel. And did NG2 upgrade through Kies. Now Wi-Fi finally works for me but it's impossible to root. But at least now I got everything working, when I get off of work I can flash the OP version of NG2 cuz at least I could root that 1.
-=- I'm sorry if someone already asked this, the search box kept disappearing on me when browsing on my device. -=-
I've been looking around for Custom Roms for the SGH-I537, and I always seem to find them. But when I go and attempt to install them through SafeStrap Recovery, it says its for everything but the JACTIVELTEATT, is there a custom ROM somewhere specifically made for this device?
JoshCiares said:
-=- I'm sorry if someone already asked this, the search box kept disappearing on me when browsing on my device. -=-
I've been looking around for Custom Roms for the SGH-I537, and I always seem to find them. But when I go and attempt to install them through SafeStrap Recovery, it says its for everything but the JACTIVELTEATT, is there a custom ROM somewhere specifically made for this device?
Click to expand...
Click to collapse
There are not any ROMs created specifically for the i537. However you can install TouchWiz-based ROMs built for the regular S4 and just flash the Masterpatch afterwards.
Devo7v said:
There are not any ROMs created specifically for the i537. However you can install TouchWiz-based ROMs built for the regular S4 and just flash the Masterpatch afterwards.
Click to expand...
Click to collapse
I've tried doing that, after flashing the masterpatch and so on, I boot the phone with that Rom-Slot active, and it looks JUST like my stock rom with the same data and everything. Just I can not use the Wi-Fi or data.
JoshCiares said:
I've tried doing that, after flashing the masterpatch and so on, I boot the phone with that Rom-Slot active, and it looks JUST like my stock rom with the same data and everything. Just I can not use the Wi-Fi or data.
Click to expand...
Click to collapse
You're doing something wrong because ROM slots cannot share data, so you are just booting your stock ROM. Are you sure you're using the correct version of SafeStrap for your firmware?
Devo7v said:
You're doing something wrong because ROM slots cannot share data, so you are just booting your stock ROM. Are you sure you're using the correct version of SafeStrap for your firmware?
Click to expand...
Click to collapse
Yes, I've been able to install some different zip files, and even successfully use backups I've made from it. I haven't found anything else that hasn't work on it.
Do you think you could send me links to everything needed to be downloaded? Just so I can make sure I did it right? I remembering installing the masterpatch m3 and camera fix
JoshCiares said:
Yes, I've been able to install some different zip files, and even successfully use backups I've made from it. I haven't found anything else that hasn't work on it.
Do you think you could send me links to everything needed to be downloaded? Just so I can make sure I did it right? I remembering installing the masterpatch m3 and camera fix
Click to expand...
Click to collapse
What firmware are you on? And what version of SafeStrap are you using?
Android KitKat, 4.4.2
SafeStrap, 3.73
JoshCiares said:
Android KitKat, 4.4.2
SafeStrap, 3.73
Click to expand...
Click to collapse
This one?
http://forum.xda-developers.com/showthread.php?p=56119330
Devo7v said:
This one?
http://forum.xda-developers.com/showthread.php?p=56119330
Click to expand...
Click to collapse
Yes, and that's the exact page I got it from.
JoshCiares said:
Yes, and that's the exact page I got it from.
Click to expand...
Click to collapse
So you reboot to SafeStrap, create a Rom slot with enough space for your ROM, flash your ROM, flash the Masterpatch, and reboot and it boots up your stock ROM?
Devo7v said:
So you reboot to SafeStrap, create a Rom slot with enough space for your ROM, flash your ROM, flash the Masterpatch, and reboot and it boots up your stock ROM?
Click to expand...
Click to collapse
Stock ROM, with all my data, but my Network AT&T is not accessible. Both, data and to call. I tried entering the VPN for it manually and it didn't work. Everything also loads extremely slowly. My ram gets cut in half. And a whole bunch of other minor stuff.
I've tested this with multiple Roms.
JoshCiares said:
Stock ROM, with all my data, but my Network AT&T is not accessible. Both, data and to call. I tried entering the VPN for it manually and it didn't work. Everything also loads extremely slowly. My ram gets cut in half. And a whole bunch of other minor stuff.
I've tested this with multiple Roms.
Click to expand...
Click to collapse
Reflash your stock ROM and start over. You did something wrong somewhere and it crippled your stock ROM.
Devo7v said:
Reflash your stock ROM and start over. You did something wrong somewhere and it crippled your stock ROM.
Click to expand...
Click to collapse
Okay. Thanks for your help. I won't be able to reflash my ROM, my laptop is broken, but hopefully things turn out good.
Hi,
I just got this phone (same phone I had to replace the one that died)::
Samsung Galaxy (SM-N910T) Note 4 (QualComm)
Marshmallow 6.0.1
It's Unlocked.
Anyway, before I could install TWRP so I could Root it, Android Firmware Updates started coming through. I figured let them install and that way I'd have them. I knew that if I tried to install them after installing TWRP, it would just replace TWRP anyway.
After the last Update, the Build is now...
Build #: MMB29M.N910T3UVU3EQI2
I have tried TWRP 3.0.2.0 & 2.8.7.0 and even PhilZ 6.59.0 but nothing will go on! Odin (latest and tried older one) starts to Flash it, it says "Recovery" and then it says, "FAIL".
I'm thinking it's gotta have something to do with the Updates to Marshmallow???
PLEASE HELP! I can't do anything that I need to do without it Rooted and I can't Root it without a Custom Recovery.
Thanks!
Dave
Zeuszoos said:
Hi,
I just got this phone (same phone I had to replace the one that died)::
Samsung Galaxy (SM-N910T) Note 4 (QualComm)
Marshmallow 6.0.1
It's Unlocked.
Anyway, before I could install TWRP so I could Root it, Android Firmware Updates started coming through. I figured let them install and that way I'd have them. I knew that if I tried to install them after installing TWRP, it would just replace TWRP anyway.
After the last Update, the Build is now...
Build #: MMB29M.N910T3UVU3EQI2
I have tried TWRP 3.0.2.0 & 2.8.7.0 and even PhilZ 6.59.0 but nothing will go on! Odin (latest and tried older one) starts to Flash it, it says "Recovery" and then it says, "FAIL".
I'm thinking it's gotta have something to do with the Updates to Marshmallow???
PLEASE HELP! I can't do anything that I need to do without it Rooted and I can't Root it without a Custom Recovery.
Thanks!
Dave
Click to expand...
Click to collapse
From what I know, the bootloader isn't locked but I recommend installing a KitKat bootloader Using this thread
https://forum.xda-developers.com/no...ws-want-to-downgrade-to-4-4-4-kitkat-t3447773
From there you can install TWRP and/or update to qg1, qe2, or older.
dottyparent said:
From what I know, the bootloader isn't locked but I recommend installing a KitKat bootloader Using this thread
https://forum.xda-developers.com/no...ws-want-to-downgrade-to-4-4-4-kitkat-t3447773
From there you can install TWRP and/or update to qg1, qe2, or older.
Click to expand...
Click to collapse
First, thank you for responding!
I used that page on my last Note 4 (it died, hardware failure), after I tried MM but hated the Ext SD handling and so I went back down to the T2 KK ROM on that page and it worked fine (I installed the entire ROM). But my replacement Note 4 that just arrived already had MM as I said and updated to a Build # I haven't seen.
But if you look at the Build #, T-Mobile seems to have (via the Updates) turned the phone into a "N910T3" instead of a "N910T". Weird! Especially since I'm with MetroPCS. Hahaha! They're owned by T-Mobile though, use the same Towers, etc..
Anyway, I'd like to try and stick with MM this time around.
But you did hit one of my grey areas.
Let me see if I understand you correctly... If I were to Flash just the KK BL, my phone would/would not continue to Boot into Marshmallow as it is now, if I Flashed nothing but that?
Or am I correct in saying that your method would mean taking the phone back, so that it would be running KitKat and then going back up to Marshmallow using a different ROM that TWRP will be able to go onto?
The reason I'm fuzzy, is because I've never Flashed just a BootLoader, so I'm not sure what would happen if I Flash just the KK BootLoader onto an MM ROM and Reboot???
Thank you again for your time!
Zeuszoos said:
First, thank you for responding!
I used that page on my last Note 4 (it died, hardware failure), after I tried MM but hated the Ext SD handling and so I went back down to the T2 KK ROM on that page and it worked fine (I installed the entire ROM). But my replacement Note 4 that just arrived already had MM as I said and updated to a Build # I haven't seen.
But if you look at the Build #, T-Mobile seems to have (via the Updates) turned the phone into a "N910T3" instead of a "N910T". Weird! Especially since I'm with MetroPCS. Hahaha! They're owned by T-Mobile though, use the same Towers, etc..
Anyway, I'd like to try and stick with MM this time around.
But you did hit one of my grey areas.
Let me see if I understand you correctly... If I were to Flash just the KK BL, my phone would/would not continue to Boot into Marshmallow as it is now, if I Flashed nothing but that?
Or am I correct in saying that your method would mean taking the phone back, so that it would be running KitKat and then going back up to Marshmallow using a different ROM that TWRP will be able to go onto?
The reason I'm fuzzy, is because I've never Flashed just a BootLoader, so I'm not sure what would happen if I Flash just the KK BootLoader onto an MM ROM and Reboot???
Thank you again for your time!
Click to expand...
Click to collapse
This method will turn your phone temporarily to a t2, of which a mm Rom will not boot. Since your goal is to have TWRP on a MM Rom, I would do the following:
1. Flash the t2 KK bootloader.
2. Find your appropriate KK bootloader (ie if you have a 910t find a 910t bootloader) and flash it
3. Flash TWRP
4. Flash a MM bootloader and modem.
dottyparent said:
This method will turn your phone temporarily to a t2, of which a mm Rom will not boot. Since your goal is to have TWRP on a MM Rom, I would do the following:
1. Flash the t2 KK bootloader.
2. Find your appropriate KK bootloader (ie if you have a 910t find a 910t bootloader) and flash it
3. Flash TWRP
4. Flash a MM bootloader and modem.
Click to expand...
Click to collapse
Is this a method you've tried B4?
I'll check out that thread and see if they've got an MM Modem too.
Isn't that the "EFS" part of a ROM? If so, there are EFS Backup apps. But they may require Root though.
TTYL
Zeuszoos said:
Is this a method you've tried B4?
I'll check out that thread and see if they've got an MM Modem too.
Isn't that the "EFS" part of a ROM? If so, there are EFS Backup apps. But they may require Root though.
TTYL
Click to expand...
Click to collapse
Yes I have tried this. I changed my phone from a trip to a t2 and back again.
dottyparent said:
This method will turn your phone temporarily to a t2, of which a mm Rom will not boot. Since your goal is to have TWRP on a MM Rom, I would do the following:
1. Flash the t2 KK bootloader.
2. Find your appropriate KK bootloader (ie if you have a 910t find a 910t bootloader) and flash it
3. Flash TWRP
4. Flash a MM bootloader and modem.
Click to expand...
Click to collapse
dottyparent said:
Yes I have tried this. I changed my phone from a trip to a t2 and back again.
Click to expand...
Click to collapse
There is an MM ROM that is Rooted and has TWRP built in, but I don't know if it would Flash over this with Odin or not
I am also considering trying the entire KK T2 ROM again to go down to KK and then Flashing that MM ROM.
It has both Odexed & DeOdexed. If I remember right, DeOdexed is the better choice, right?
Thanks for all your time and help!
Dave
Hi,
You know what's sad, is that if I could somehow Roog it without TWRP, then I could use the way awesome "Flashify" app to try to get TWRP on this phone! <lol>
Dave
dottyparent said:
From what I know, the bootloader isn't locked but I recommend installing a KitKat bootloader Using this thread
https://forum.xda-developers.com/no...ws-want-to-downgrade-to-4-4-4-kitkat-t3447773
From there you can install TWRP and/or update to qg1, qe2, or older.
Click to expand...
Click to collapse
dottyparent said:
Yes I have tried this. I changed my phone from a trip to a t2 and back again.
Click to expand...
Click to collapse
Could you please tell me where the files are that you used, so that I can have the exact same ones to work with? I looked at the link you provided, but I couldn't find just the BootLoader in it. I saw where someone requested just the BootLoader and Modem (you?) and "Trex888" said he would upload them right away and provide a link, but I did not see one ever posted. Just the link for the entire ROM.
Btw, in Odin, if you're Flashing only the BootLoader, do you use the "BL" button instead of the "AP" (formerly "PDA") button? What about just the Modem (thru Recovery?)?
I just tried Flashing the entire T2 KK ROM that I had used to go back from MM to KK on my first Note 4, but this one wouldn't take that either. It immediately said "FAIL".
I'm sorry if I'm a pain. It's just that I'm disabled and constantly laying on my side, so a laptop is out for regular use and so this phone is my main and only communication with the outside world. What I'm saying is that it's not a hobby phone and I have to get it right, because (see below). So I don't want to Flash something that may not do it, so I want to exactly match what you did.
You see, I can only sit up to Flash from Odin on my Windows computer with my phone cabled to it for just so long because of my condition.
Not your problem, I know. But I'm explaining it to you so that you can understand that I'm not just trying to be lazy. But instead, I need to make sure I do exactly what worked for you, with exactly those files, because if something goes wrong, it could take me days of short time computer access due to my situation (too much overwhelming pain) to figure it out and get it (hopefully) fixed. So you can see the importance, no doubt.
This phone right now (see Build #) says it's a T3, but whatever works.
Right now, it's without Recovery so I can't Root it, so I can't get Write access to my Ext SD, etc.. I need to Root!
Also, this T3 MM ROM is having issues with the Display. Sometimes it'll get all chopped up and I have to Reboot.
So anyway, I need to get this done and I would very much appreciate your further help!
Thank You!!!
Dave
Zeuszoos said:
Could you please tell me where the files are that you used, so that I can have the exact same ones to work with? I looked at the link you provided, but I couldn't find just the BootLoader in it. I saw where someone requested just the BootLoader and Modem (you?) and "Trex888" said he would upload them right away and provide a link, but I did not see one ever posted. Just the link for the entire ROM.
Btw, in Odin, if you're Flashing only the BootLoader, do you use the "BL" button instead of the "AP" (formerly "PDA") button? What about just the Modem (thru Recovery?)?
I just tried Flashing the entire T2 KK ROM that I had used to go back from MM to KK on my first Note 4, but this one wouldn't take that either. It immediately said "FAIL".
I'm sorry if I'm a pain. It's just that I'm disabled and constantly laying on my side, so a laptop is out for regular use and so this phone is my main and only communication with the outside world. What I'm saying is that it's not a hobby phone and I have to get it right, because (see below). So I don't want to Flash something that may not do it, so I want to exactly match what you did.
You see, I can only sit up to Flash from Odin on my Windows computer with my phone cabled to it for just so long because of my condition.
Not your problem, I know. But I'm explaining it to you so that you can understand that I'm not just trying to be lazy. But instead, I need to make sure I do exactly what worked for you, with exactly those files, because if something goes wrong, it could take me days of short time computer access due to my situation (too much overwhelming pain) to figure it out and get it (hopefully) fixed. So you can see the importance, no doubt.
This phone right now (see Build #) says it's a T3, but whatever works.
Right now, it's without Recovery so I can't Root it, so I can't get Write access to my Ext SD, etc.. I need to Root!
Also, this T3 MM ROM is having issues with the Display. Sometimes it'll get all chopped up and I have to Reboot.
So anyway, I need to get this done and I would very much appreciate your further help!
Thank You!!!
Dave
Click to expand...
Click to collapse
Okay. Here is what I did exactly.
Download my Files here: https://1drv.ms/f/s!AJEa3D0cBAhIbQ
Stock 910T files here https://androidfilehost.com/?w=files&flid=20602
i guess if you need any other stock files sammobile works.
This will reset your phone!
1) Odin flash the AOG1 file. this turns the phone into a t2 phone.
2) Odin the ANK4 rom. this returns the phone to a 910t.
3) Boot into the ANK4 rom and download the MM update. This should land you on the first MM update, EPE3
4) Flash TWRP, thourgh AP, which should work. Might as well flash superSU or magisk.
At this point i would wipe everything and install a custom rom, but you could update to a newer boot loader and modem using the BL and CP buttons, respectively.
hope this helps
dottyparent said:
Okay. Here is what I did exactly.
Download my Files here: https://1drv.ms/f/s!AJEa3D0cBAhIbQ
Stock 910T files here https://androidfilehost.com/?w=files&flid=20602
i guess if you need any other stock files sammobile works.
This will reset your phone!
1) Odin flash the AOG1 file. this turns the phone into a t2 phone.
2) Odin the ANK4 rom. this returns the phone to a 910t.
3) Boot into the ANK4 rom and download the MM update. This should land you on the first MM update, EPE3
4) Flash TWRP, thourgh AP, which should work. Might as well flash superSU or magisk.
At this point i would wipe everything and install a custom rom, but you could update to a newer boot loader and modem using the BL and CP buttons, respectively.
hope this helps
Click to expand...
Click to collapse
Thank you for responding!
The OG1 is the T2 ROM that I had just tried and reported that unlike my previous Note 4, it would not Flash on this one to turn it into a KK T2. I also tried the other 2 ROMS to no avail.
I think it's because this one says it's a T3.
Thanks,
Dave
Zeuszoos said:
Thank you for responding!
The OG1 is the T2 ROM that I had just tried and reported that unlike my previous Note 4, it would not Flash on this one to turn it into a KK T2. I also tried the other 2 ROMS to no avail.
I think it's because this one says it's a T3.
Thanks,
Dave
Click to expand...
Click to collapse
I'm sorry man I did everything that I could think of. I knew that the T3 had a few issues with bootloaders and downgrading and stuff, but wow, i didn't know about these issues. Good luck with trying something else then.
dottyparent said:
I'm sorry man I did everything that I could think of. I knew that the T3 had a few issues with bootloaders and downgrading and stuff, but wow, i didn't know about these issues. Good luck with trying something else then.
Click to expand...
Click to collapse
No, I'm sorry, but you have to give me the answer.
All seriousness aside, I depreciate all your effort.
I can only think of one thing left to try... Go to Sammy's site and get the Lollipop 5.1.1 ROM and see what happens. It can't hurt to try, right?
I'll let ya know what happens and thank you again!
Happy Thanksgiving!
Dave
dottyparent said:
I'm sorry man I did everything that I could think of. I knew that the T3 had a few issues with bootloaders and downgrading and stuff, but wow, i didn't know about these issues. Good luck with trying something else then.
Click to expand...
Click to collapse
Guess what? I decided to take a picture of my phone's screen after it Failed to let me Flash anything at all in Odin. I tried TWRP again and this time read what my phone responds with and it says the following:
Custom Binary (Recovery) Blocked By FRP LOCK
Does that mean anything to you?
TTYL
Zeuszoos said:
Guess what? I decided to take a picture of my phone's screen after it Failed to let me Flash anything at all in Odin. I tried TWRP again and this time read what my phone responds with and it says the following:
Custom Binary (Recovery) Blocked By FRP LOCK
Does that mean anything to you?
TTYL
Click to expand...
Click to collapse
Well I searched around XDA and it seems to be a problem exclusive to the T3. Try going to settings -> security and see if there is a option to disable resetting protection. Or see if there is a way to disable OEM locking. However it's probably not there. The only successful thread I found was this
https://forum.xda-developers.com/note-4/help/note-4-t-mobile-sm-n910t3-custom-binary-t3346840
---------- Post added at 07:28 PM ---------- Previous post was at 07:24 PM ----------
If all else doesn't work, perhaps you could repartition your phone. You need a pit file and a few ROMs
Zeuszoos said:
Hi,
I just got this phone (same phone I had to replace the one that died)::
Samsung Galaxy (SM-N910T) Note 4 (QualComm)
Marshmallow 6.0.1
It's Unlocked.
Anyway, before I could install TWRP so I could Root it, Android Firmware Updates started coming through. I figured let them install and that way I'd have them. I knew that if I tried to install them after installing TWRP, it would just replace TWRP anyway.
After the last Update, the Build is now...
Build #: MMB29M.N910T3UVU3EQI2
I have tried TWRP 3.0.2.0 & 2.8.7.0 and even PhilZ 6.59.0 but nothing will go on! Odin (latest and tried older one) starts to Flash it, it says "Recovery" and then it says, "FAIL".
I'm thinking it's gotta have something to do with the Updates to Marshmallow???
PLEASE HELP! I can't do anything that I need to do without it Rooted and I can't Root it without a Custom Recovery.
Thanks!
Dave
Click to expand...
Click to collapse
That's weird. I updated my N910T to EQI2 with Odin, rooted using CF-Auto-Root for N910T and then flashed TWRP 3.1.1 and I had no problems at all
dottyparent said:
I'm sorry man I did everything that I could think of. I knew that the T3 had a few issues with bootloaders and downgrading and stuff, but wow, i didn't know about these issues. Good luck with trying something else then.
Click to expand...
Click to collapse
ShaDisNX255 said:
That's weird. I updated my N910T to EQI2 with Odin, rooted using CF-Auto-Root for N910T and then flashed TWRP 3.1.1 and I had no problems at all
Click to expand...
Click to collapse
But you updated to it. From KK?
KK doesn't have it and it's not in downloadable ROMS.
But if MM is already on the phone (mine), then it has FRP. See my other response.
TTYL
Zeuszoos said:
But you updated to it. From KK?
KK doesn't have it and it's not in downloadable ROMS.
But if MM is already on the phone (mine), then it has FRP. See my other response.
TTYL
Click to expand...
Click to collapse
That's because I have a n910t not a t3
Zeuszoos said:
But you updated to it. From KK?
KK doesn't have it and it's not in downloadable ROMS.
But if MM is already on the phone (mine), then it has FRP. See my other response.
TTYL
Click to expand...
Click to collapse
I upgraded from LL. The device was running 5.0.1 and now has 6.0.1
dottyparent said:
Well I searched around XDA and it seems to be a problem exclusive to the T3. Try going to settings -> security and see if there is a option to disable resetting protection. Or see if there is a way to disable OEM locking. However it's probably not there. The only successful thread I found was this
https://forum.xda-developers.com/note-4/help/note-4-t-mobile-sm-n910t3-custom-binary-t3346840
---------- Post added at 07:28 PM ---------- Previous post was at 07:24 PM ----------
If all else doesn't work, perhaps you could repartition your phone. You need a pit file and a few ROMs
Click to expand...
Click to collapse
Thank you for looking! I found out what it is.
It's "Factory Reset Protection" (FRP)
What it does, is keep someone else from Factory Resseting your phone if they steal it. When they reset it, during setup, they have to type in the last Google Email and Password that the phone used, before they can set up theirs.
After reading that, I remembered having to put my Google Info in at two separate points and seeing it telling me to "Verify", but I was just blowing right through setup, not reading all of the small print. I mean hey, I had no idea that even existed and was just annoyed that I had to type the same thing twice!
It will only be found on phones that already have Lollipop and up on them out of the box and probably not all of them yet. And you don't have to worry about downloadable ROMS, so those who have phones that started with KitKat, or even early versions of Marshmallow 6.0 or 6.0.1 would not have seen this happen to them. Even those who updated to the same version of Mm that my phone has won't, if they started with KK or an older MM and then updated to it.
Again, this is something that your phone would have "Out of the Box" and the phone (not all) would have at least L on it.
Just FYI, it's not just Samsung, either.
Just FYI, I have confirmed this info. It is a fact.
Once I have an easy to do, working fix, hopefully without having to perform a Factory Reset, I will "Create A Thread" and as normal for me, write clear and easy, step by step (not leaving any out) instructions on how to "Unlock FRP" and then come back here and post a link to the thread. Hopefully this week.
This phone will not beat me!!!
TTYL
Dave