New to android development aving trouble getting logcat to show in Eclipse - One (M7) Q&A, Help & Troubleshooting

I have tried:
##2846579## which does nothing
Removed the line of code in /system/etc/init that says:
rm /dev/log/main
I have usb debugging enabled, I have tried resetting ADB in devices, and I have the following error still that states
"Unable to open log device '/dev/log/main'": No such file or directory"
I would appreciate ANY help to get this resolved...

Related

Daemon not running - Failed to connect.

Apologies if this has been repeated but I have spent the last 30mins looking through this site and can not find a similar problem.
I am currently going through the process of overclocking my Nexus one.
I am running Cyanogen and have flashed the image file needed.
I am now trying to push the bcm4329.ko file to the system modules folder.
I have updated my USB drivers sand the phone appears to have liked that.
However when I try to perform an ADB remount command it takes a while thinking about it, tells me that "daemon is not running" and is "starting it now"
ADB server didnt ACK
* failed to start daemon *
error: can not connect to daemon.
Any suggestions as to how I can resolve this issue please?
adb kill-server
adb start-server

error: protocol fault (no status) ? FIXED!

Following the guide atnookcolormods and when I try:
Code:
adb shell mount -o remount,rw /dev/block/mmcblk1p2 /system
I get: error: protocol fault (no status)
My NC is attached as confirmed by adb devices, which shows my serial number.
Any ideas? Obviously new to all this...
Windows 7
Thinking Linux would be better for this... But my linux box is not here right now.
EDIT:
Figured it out. It said nothing about pressing the SuperUser icon..
SuperUser icon
What exactly does your comment mean because I am having this problem and I'm not sure what to do about it.
means that you have to open SuperUser in your nook in order to push files via ADB from your computer
error: protocol fault (no status)
and how am I to do that? What setting do I add/change in SuperUser?
I was getting the same error while my nook was asleep. I woke it up and it worked fine. Common sense I guess, but took me a minute.

Install ADB on Windows & ubuntu 12.04 or 12.10

If you need to flash ROM even using fastboot for Smartphone or Tablet in which they use Android OS! Then Ubuntu OS is needed!
This is a guide I made for ubuntu users and included a guide for windows users to setup Android SDK which contains ADB.
Android Debug Bridge (ADB) provides a terminal interface on your PC to interact with your device's file system. This can be useful for many things like installing & uninstalling apps, logcat, backup & restore, and hacking your device just to name a few.
ubuntu 12.04 & 12.10 Guide
1. Go here and download android-sdk (not the adt-bundle)....
https://hotfile.com/dl/241406263/5e6a306/android-sdk_r22.0.5-linux.tgz.html
2. Place the downloaded file in your home folder and then extract it and you should get a folder named android-sdk-linux (do not rename it).
3. If you’re on a 64bit machine run these commands in terminal to make sdk compatible with 64bit (if you’re on 32bit machine then skip this step)....
sudo apt-get update
sudo apt-get install ia32-libs-multiarch
4. Run this command in terminal to install jdk if you don’t have it already....
sudo apt-get install openjdk-6-jdk
5. Navigate to the home folder where you extracted android-sdk-linux and open the folder then open the folder named tools
6. Inside the tools folder there will be a file named android... double click it and select run then android sdk manager will open.
7. In the center pane deselect everything... Now only select the following....
Android SDK Tools
Android SDK Platform-tools
Android Support Library
8. Once selections have been made click on install packages and wait till finished.
9. Upon completion of step 8 in terminal run this command....
sudo gedit ~/.bashrc
When the file opens, go to the very bottom and copy/paste the following 3 lines (make sure they’re each on separate lines)....
# Android tools
export PATH=${PATH}:~/android-sdk-linux/tools
export PATH=${PATH}:~/android-sdk-linux/platform-tools
10. Now reboot your computer.
11. Set your phone to usb debugging then plug it to your pc after pc is done booting
12. Open a terminal on your pc and enter....
adb devices
If all went well, you should see your phone’s serial number and you’ll be ready to go.
~~~~~Important~~~~~
You can use steps 5 & 6 to open Android SDK Manager & update your ADB/SDK installation. Only select your installed packages then update.
Also if you only need the fastboot/adbtools:
sudo add-apt-repository -y ppa: phablet-team/tools
Note: delete the space after"-y ppa:" -xda creates smileys like ppa
sudo apt-get update
sudo apt-get install -y phablet-tools
Sent from my Nexus 4 using xda app-developers app
Thank...
gazhead said:
Also if you only need the fastboot/adbtools:
sudo add-apt-repository -y ppa: phablet-team/tools
Note: delete the space after"-y ppa:" -xda creates smileys like ppa
sudo apt-get update
sudo apt-get install -y phablet-tools
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Thanks man! It's also good way!
Followed this guide (thank you for posting) but couldn't connect. Scratched around and found I needed to create a new file in /etc/udev/rules.d with:
Code:
SUBSYSTEM=="usb", ATTR{idVendor}=="<4-char_verndorID>", ATTR{idProduct}=="4-char_productID", MODE="0666", OWNER="username"
Followed by:
Code:
sudo restart udev
Then plugged device in and it worked!
qtoon said:
Followed this guide (thank you for posting) but couldn't connect. Scratched around and found I needed to create a new file in /etc/udev/rules.d with:
Code:
SUBSYSTEM=="usb", ATTR{idVendor}=="<4-char_verndorID>", ATTR{idProduct}=="4-char_productID", MODE="0666", OWNER="username"
Followed by:
Code:
sudo restart udev
Then plugged device in and it worked!
Click to expand...
Click to collapse
What did you name the new file you created? Or did you add this string to another existing file from the rules.d directory? I'm not sure what I've done wrong, but I get
Code:
[email protected]:~$ adb devices
No command 'adb' found, did you mean:
Command 'cdb' from package 'tinycdb' (main)
Command 'gdb' from package 'gdb' (main)
Command 'dab' from package 'bsdgames' (universe)
Command 'zdb' from package 'zfs-fuse' (universe)
Command 'kdb' from package 'elektra-bin' (universe)
Command 'tdb' from package 'tads2-dev' (multiverse)
Command 'pdb' from package 'python' (main)
Command 'jdb' from package 'openjdk-6-jdk' (main)
Command 'jdb' from package 'openjdk-7-jdk' (universe)
Command 'ab' from package 'apache2-utils' (main)
Command 'ad' from package 'netatalk' (universe)
adb: command not found
[email protected]:~$
This is after following each step, adding the three lines to the end of .bashrc and rebooting.
atmu5fear said:
What did you name the new file you created? Or did you add this string to another existing file from the rules.d directory? I'm not sure what I've done wrong, but I get
Code:
[email protected]:~$ adb devices
No command 'adb' found, did you mean:
Command 'cdb' from package 'tinycdb' (main)
Command 'gdb' from package 'gdb' (main)
Command 'dab' from package 'bsdgames' (universe)
Command 'zdb' from package 'zfs-fuse' (universe)
Command 'kdb' from package 'elektra-bin' (universe)
Command 'tdb' from package 'tads2-dev' (multiverse)
Command 'pdb' from package 'python' (main)
Command 'jdb' from package 'openjdk-6-jdk' (main)
Command 'jdb' from package 'openjdk-7-jdk' (universe)
Command 'ab' from package 'apache2-utils' (main)
Command 'ad' from package 'netatalk' (universe)
adb: command not found
[email protected]:~$
This is after following each step, adding the three lines to the end of .bashrc and rebooting.
Click to expand...
Click to collapse
@atmu5fear, inferring that you're new to Linux (a common background for all), some notes:
Unlike wlth Win-d'oh-s, there is a worldwide development community that's always working toward improvement of every aspect of the system, including echoed messages and documentation. You may have to shake off the tendency to ignore Windudz messages, which are frequently unhelpful. Linux command echoes are much more on-target. Also, look for files such as README in rules.d and read it!
Now before creating a new config file (which may not be necessary on your system), see the top feedback line: "No command 'adb' found." First, see that the adb binary is present and that it has exec permission. (Since it's a small file and functions alone, I prefer to copy it to the folder I'm working from.)
If it then runs but won't connect, read on...
Directory (or "folder") names with a trailing '.d' are special: They configure, control, or provide executables for daemons (programs which run continuously, providing a service).
Within service-config.d folders, if the service steps through the files sequentially (as in this case), then it does so based on each filename. (True except for the special case of rc.d, iIRC, in which order is set by the special program rcorder).
So in this case, for example, since the existing files are named 70-whatever, your newly-created file could be 80-atmu5fears-phone to load after the others.
Should connect.
qtoon said:
@atmu5fear, inferring that you're new to Linux (a common background for all), some notes:
Unlike wlth Win-d'oh-s, there is a worldwide development community that's always working toward improvement of every aspect of the system, including echoed messages and documentation. You may have to shake off the tendency to ignore Windudz messages, which are frequently unhelpful. Linux command echoes are much more on-target. Also, look for files such as README in rules.d and read it!
Now before creating a new config file (which may not be necessary on your system), see the top feedback line: "No command 'adb' found." First, see that the adb binary is present and that it has exec permission. (Since it's a small file and functions alone, I prefer to copy it to the folder I'm working from.)
If it then runs but won't connect, read on...
Directory (or "folder") names with a trailing '.d' are special: They configure, control, or provide executables for daemons (programs which run continuously, providing a service).
Within service-config.d folders, if the service steps through the files sequentially (as in this case), then it does so based on each filename. (True except for the special case of rc.d, iIRC, in which order is set by the special program rcorder).
So in this case, for example, since the existing files are named 70-whatever, your newly-created file could be 80-atmu5fears-phone to load after the others.
Should connect.
Click to expand...
Click to collapse
Thanks @qtoon for the reply. I'm not really new to Ubuntu, albeit, it's been a while. First started using it just prior to the realease of Hardy Heron 8.04 LTS. That being said I am certainly no expert, but am somewhat familiar and comfortable with the command line. I did read the README file before posting, but since I'm not all that familiar with configuration files and the like, I figured maybe I should ask.
As per your suggestion i moved the ADB binary to my home folder, not necessarily my working folder, but to test to see if the adb command would be recognized in terminal.
Code:
mv ~/ADB/android-sdk-linux/platform-tools/adb ~/
Still got same result so I moved it back, then went on to make a new file and add the suggested string
Code:
sudo > /etc/udev/rules.d/80-atmu5fear-adb
sudo gedit /etc/udev/rules.d/80-atmu5fear-adb
After saving and restarting udev I still get the same "adb command not found" error.
I then changed the string to read OWNER"atmu5fear" instead of "username", still nothing
Any more suggestions?
Thanks
atmu5fear
Sorted it out
instead of:
adb devices
i needed to input:
./adb devices
It's listed, and in order to use the adb shell:
./adb shell
once in the shell all adb commands work
I get this error...
[email protected]:~$ sudo > /etc/udev/rules.d/80-sjy-phone
bash: /etc/udev/rules.d/80-sjy-phone: Permission denied
ok....... didn't need to add a file, changed phone usb mode to media device and all is ok.
thanks
atmu5fear said:
Sorted it out
instead of:
adb devices
i needed to input:
./adb devices
It's listed, and in order to use the adb shell:
./adb shell
once in the shell all adb commands work
Click to expand...
Click to collapse
Didn't think to mention that, apologies.
Quick 'why' on the ./ here.
Glad you got it running.
Just tried on 14.4 and worked like a charm.
Note: No need to reboot the computer, just reload the bash config with
Code:
source ~/.bashrc
Thanks
A good step by step guide
i will try it and see if it works
Thanks again
Hello, can someone help me ? - I m having problems connecting my device with adb (I ve connected several other devices before with no problems).
I ve got an Allwinner A20 tv box, it worked fine for a few months then one day, after being on (but idle) for a few hours, I noticed the screen was blank but the light on the front was blue (indicating it was on, red is standby). It would not respond to the remote control or to anything, so I unplugged it and since then it will not boot and the screen is blank, the red light will light up but that is it. I ve eliminated the remote controller not working, but I cant boot the device.
So I ve tried connecting via ADB (with Ubuntu) but I cant get the device to show up after typing "adb devices".
Using this guide:
http://androidonlinux.wordpress.com/2013/05/12/setting-up-adb-on-linux/
I can get the vendor id and device id and I ve added it and the manufacturer to udev/modeswitch devices, but when I type "sudo usb_modeswitch -v 0x1f3a -p 0xefe8 -S -R -W"
I get the following error:
~/Android/sdk/platform-tools$ sudo usb_modeswitch -v 0x1f3a -p 0xefe8 -S -R -W
Take all parameters from the command line
* usb_modeswitch: handle USB devices with multiple modes
* Version 2.1.1 (C) Josua Dietze 2014
* Based on libusb1/libusbx
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x1f3a
DefaultProduct= 0xefe8
SierraMode=1
NeedResponse=0
Look for default devices ...
found USB ID 048d:1336
found USB ID 1d6b:0002
found USB ID 19a8:2036
found USB ID 1f3a:efe8
vendor ID matched
product ID matched
found USB ID 1d6b:0001
found USB ID 062a:0102
found USB ID 1d6b:0001
Found devices in default mode (1)
Access device 004 on bus 003
Current configuration number is 1
Use interface number 0
USB description data (for identification)
-------------------------
Manufacturer: not provided
Product: not provided
Serial No.: not provided
-------------------------
Send Sierra control message
Error: Sierra control message failed (error -7). Abort
I ve searched Google for the error code but I cannot find anything.
The device was rooted and USB debugging was on.
Any help would really be appreciated.
Thanks

Getting rid of the emulated CD drive and unknown devices in MTP mode [Partial Fix]

When you connect your MIUI device to the computer through USB in File Transfer (MTP) mode (that is, not in Photo Transfer), it also emulates a CD-ROM drive. The ISO image for the fake CD contains a copy of Mi Assistant, a device management tool for the PC, which is in Chinese only and can be downloaded from the Internet anyway. Basically, it's all useless and mildly annoying.
View attachment 3137500
Here's what you need to do to get rid of it:
Step 1. Edit /system/build.prop and add the line:
Code:
persist.service.cdrom.enable=0
Step 2. Edit /init.qcom.usb.rc and where it says:
Code:
on property:sys.usb.config=mtp
(a) Change the first line to remove mention of mass_storage (this is for the CD only):
Code:
write /sys/class/android_usb/android0/functions mtp
(b) Remove these two lines:
Code:
write /sys/class/android_usb/android0/f_mass_storage/lun/ro 1
write /sys/class/android_usb/android0/f_mass_storage/lun/file /data/miui/cdrom_install.iso
Similarly, where it says:
Code:
on property:sys.usb.config=mtp,adb
(a) Change the first line after the above to:
Code:
write /sys/class/android_usb/android0/functions mtp,adb
(b) Remove these two lines:
Code:
write /sys/class/android_usb/android0/f_mass_storage/lun/ro 1
write /sys/class/android_usb/android0/f_mass_storage/lun/file /data/miui/cdrom_install.iso
Step 3. Delete the ISO image file to free up some space.
File location: /data/miui/cdrom_install.iso
And here's how to do it:
Using Android Debug Bridge from the command line:
Code:
adb root
adb shell "mount -o remount,rw /system"
adb shell "echo persist.service.cdrom.enable=0 >>/system/build.prop"
adb pull /init.qcom.usb.rc
Now use your favorite editor to make changes as described above in step 2.
Code:
adb push init.qcom.usb.rc /
adb shell "mount -o remount,ro /system"
adb shell "rm -f /data/miui/cdrom_install.iso"
adb reboot
Using ES File Explorer:
Download from Play Store or the developer's website. Install. Open. In context menu (hold leftmost button for 1 second), switch Root Explorer to On (this will fail). Go back to the home screen. Open Security, Permissions, Root Access. Put the switch next to ES File Explorer to On. Now you can switch back to ES File Explorer, and follow the steps 1-3 above. Use the built-in editor the make changes in the files.
Unknown USB devices when connected in MTP mode
When your device is connected in MTP mode (File Transfer) there are 3 unrecognized USB devices. To check if you have them too, go to Control Panel and choose Device Manager or run mmc devmgmt.msc from the command line (screenshot 1). The devices appear to have no hardware IDs (screenshot 2) and their class number seems to be {c897b31c-e8d2-59e9-a212-ccf0962fe102} (full registry dump provided as attachment).
View attachment 3137478 View attachment 3137479
This problem appears to be caused by the CD-ROM emulation as well: the number of devices will actually increase to 4 when it's switched off following the instructions above, which means there must be one extra step to get rid of it completely. This doesn't seem to cause any problems and the issue appears to be purely cosmetic. If I have time to investigate it further, I will report the conclusions back here. Meanwhile, if anyone has an idea what the cause is, please feel free to share it (might also be a driver issue).
Disclaimer: there might be some mistakes in what I wrote. Please use at your own discretion. This should work with a "developer" stock ROM out of the box, otherwise you'll need to set-up root access first.
Update for a total fix, and a more elegant approach
So the missing link to make the mysterious devices disappear is to edit /init.qcom.usb.rc and where it says:
Code:
case "$cdromenable" in
0)
Comment out (put the # sign) in front of:
Code:
#echo "" > /sys/class/android_usb/android0/f_mass_storage/lun0/file
The best way to make the whole change seems to be to unpack boot.img, for example with Android Image Kitchen, apply the patches (diffs attached), rebuild the image, and flash it. The persist.service.cdrom.enable=0 property can be set in /default.prop so that all the changes are contained within the boot image. In summary:
Code:
unpackimg boot.img
echo "persist.service.cdrom.enable=0" >>ramdisk/default.prop
patch ramdisk/init.qcom.usb.rc < init.qcom.usb.rc.diff
patch ramdisk/init.qcom.usb.sh < init.qcom.usb.sh.diff
repackimg
cleanup
adb reboot bootloader
fastboot erase boot
fastboot flash boot image-new.img
fastboot reboot
@ Aqq123 thanks for the write up, I have a Mi 4C and the iso file is not in /data/miui/ but it still shows up when connecting to pc

Read-only file system on Virtual Device

I am trying to get a simple "Hello World" app running in Android Studio but am having a surprising amount of trouble. My current issue seems to be that Android Studio is unable to write to the virtual device. Although my virtual device takes a long time to start up it does eventually get going and seems to present as 'working'.
The output for the device in the "Run" windows shows:
C:\Users\Slarti\AppData\Local\Android\sdk\tools\emulator.exe -netdelay none -netspeed full -avd Nexus_5_API_23_x86
emulator: device fd:928
HAXM is working and emulator runs in fast virt mode
creating window 43 59 329 583
emulator: emulator window was out of view and was recentered
emulator: UpdateChecker: skipped version check​However the output in the "app" log of the "Run" window reads:
Target device: Nexus_5_API_23_x86 [emulator-5554]
Installing APK: C:\Users\Slarti\Documents\...
Uploading file to: /data/local/tmp/...
com.android.ddmlib.SyncException: Read-only file system​
and the "Event Log" shows:
2:01:53 PM Gradle sync started
2:04:30 PM Gradle sync completed
2:04:35 PM Executing tasks: [:app:generateDebugSources, :app:generateDebugAndroidTestSources]
2:04:56 PM Gradle build finished in 25s 136ms
2:10:33 PM Unable to obtain result of 'adb version'
2:11:03 PM Executing tasks: [:app:assembleDebug]
2:11:40 PM Gradle build finished in 36s 851ms
2:11:43 PM transfer error: Read-only file system
2:11:43 PM Error during Sync: Read-only file system​
I've spent a lot of time searching for a solution for this, including re-installing Android Studio but I still keep having the same problem. Does anyone know what could be causing this and how I can fix it? The program itself is a very simple "Hello World!" program and I have left most things in Android Studio at their default values but clearly something somewhere must be set incorrectly. Any ideas as to what it could be?
Thanks for any help,
Slarti.

Categories

Resources