[REQ] Xperia M files - Sony Xperia ZR

Hello, i'm new here, so please bear with me.
If it possible, can someone(s) provide the following files, thanks.
MSM8227.hex/MPRG8227.hex
8227_msimage.mbn
debrick.img with 4.3 bootloader
and if someone could be kind enough to tell if there is a testpoint on the Xperia M and kindly telling me where it is.
Other important info:
Sony Xperia M C1905
Firmware: 15.4.A.1.9 Global.
Stock Rom+Kernel. Rooted.
Updated to 4.3 JB
Answers to your questions:
I cannot boot my phone, no lights, no vibration etc.
My computer does recognize it as QHSUSB DLOAD
No, i cannot get access to fastboot/flashmode/recovery.
And no, i do not know why my phone ended up like it did. I was playing a game one time and it never booted again.
What I intend to do.
1. I'm going to try and boot from the sdcard.
2. If 1. fails i'm going to try and use QPST to get the phone going again.
3. If 1. and 2. fail, i'm bringing out the baseball bat. :laugh:

Unfortunately, I have the same problem So far I have not found any solution

this is Xperia ZR forum. ask moderator to move your question to proper section

help
hey bro ny phone is connected in QHSUSB_DLOAD can u say me how can i connect my phone to qpst
plzz help me..............:crying::crying:

Related

[Q] Empty device?

Hello,
I'm new here and i first of all will apologize myself for my bad English.
Further i will ask for some effective help.
I have bought a Xperia x8 device with Android 4. .. (and other numbers)
Now thats not original/official. This was rooted etc. with Cyanogen 9.0 and one or another flash program 'nad'.
Now I read about it and i tried SuperOneClick and Flashtool.net for getting the phone fully back to the moment he was ever bought. Then a will upgrade it to the newest version of android official available for that x8 with the official Sony tools. But that is not so easy.
Now there is going something wrong with (I think) SuperOneClick, but the point is that I don't have anything more on the phone. When i put the battery in the phone, it only will start up with the message Sony Ericsson, and that's it. An 'empty device' I think, like they say.
Now my question is can and how can I repair that to what I wanted to do? Can you please explain it with much details in simple English please, if it's possible?
With kindly regards
Delelith
Post #2
http://forum.xda-developers.com/showthread.php?t=1481630
Sent from my xperia katana
Hi,
I can't enter the flash mode on the phone when I press the back/return button, what now?
Greetz
Impossible, you must 'hold back botton' while connecting USB cable from both sides.
"why do we fall, bruce?
so that we can pick ourselves up."
Hi,
I have tried to follow your instructions, but its don't works. What now?
With kind regards
if you are using flashtool to flash the stock kernel and stock rom , please let us know first.
if you have problem with flashing the rom , you must remove the battery then place the battery and immediately hold the back button and connect the usb cable to your device...,it will start flashing the rom, after finishing the flash process you must wait till your phone boot itself.it will take about 2-3 minutes.

[Q] Help please Sony xperia z Font installer wont start

Hello, i have an xperia z c6606 rooted 10.3.1.E.0.191 firmware 4.2.2 jellybean and my company is tmobile.
its the water resistant xperia phone so i cannot open the phone, its just abunch of slots on the sides. i dont have a micro sd card but it supports it (if a sd card can help my problem) o and my bootloader is locked
so thats all the information i know about the phone. heres my problem.
i used the "Font Installer ★ Root ★" application from the google play store.
i tried to install dark wedding font and it asked me to restart. after i did i just get the loop reboot where it shows the sony logo then xperia logo then redoes the boot again. im pretty sure it ruined my font folder and made it so i cant start but im not sure on what to do to try to fix it. im new to android and used the kingo one click root so i dont have exact insider knowledge on what to do.
i searched google for answer but either they are outdated (links dont work) or they mention other things in which i cannot figure out what to do.
i have a flash tool from d-h.st/Kb8 (thats a url)
and downloaded a stock rom from forum.xda-developers.com/showthread.php?t=2511188
the rom is a ftf file and i have no clue what to do with it :3
If anyone could help it will be much appreciated.
(my computer runs ubuntu 12.4/windows 8 incase my computer is needed)
p.s. yes flashtool and rom is on my computer. blah
i just half ashed what i was doing a yolo'ed it and used the flash tool and tried to flash the rom onto my phone while in flash mode. it put the rom on and removed all my stuff which i dont mind. i just have to make sure my phone is fully functional. if not. ill edit this post.
Yup all fixed. sorry for wasting room on the forum. i really was lost. but i yolo'ed and BOOM yolo is the key to all lifes problems.

[Q] flash tool requirement on both z1 and mac os 10.7.5

F
irst of all, thanks to anyone can help, i ve searched but i didn t find an answer to my questions.
[*]wanna update on a stock firmware, unlocked bootloader,no root,xperia 6903 z1, via flashtool on a mac osx running os 10.7.5.
[*]i was able to use flashtool on a previous xpseria s, unlocked and root smartphone, but i reinstall os system too, so im not sure what i really need to make flashtool work.
[*]on my mac flashtool neither start just bounces a couple of time and shut down, no xperia z1 attached.
[*]well that s all, what do i need step by step ti update my xperia z1 before is rolled out in my country ( italia)? why flashtool doesnt start.
[*]hope some kind guy can help, hope too this is not a duplicate o an answer yet done.
[*]thanx all in advance
[*]​
​
Maronna bucaiola, just use a PC with Win7 and update to latest version. (I don't use Mac)

[SOLVED] Unbrick c5303 possible?

Hey Folks,
Yesterday I came accross a new firmware for my C5303 (Stock) Rom. Problem was, something went fishy on my computer and the upgrade process went south midways.
Probelm being: I have neither rooted, nor unlocked the bootloader.
Is there a way to unbrick? Unfortunatelly I have learned, that appart from other SONY devices, the SP is not so peachy when it comes to custom roms.
Current state:
The device is not recogniced by the flash tool of Sony, or the suite.
Could someone point fingers where to look for a solution?
You will have to flash an FTF file using "flashtool".
A search on this forum will surely point you in the right direction.
There are already plenty of guides.
Good luck!
kevke said:
Hey Folks,
Yesterday I came accross a new firmware for my C5303 (Stock) Rom. Problem was, something went fishy on my computer and the upgrade process went south midways.
Probelm being: I have neither rooted, nor unlocked the bootloader.
Is there a way to unbrick? Unfortunatelly I have learned, that appart from other SONY devices, the SP is not so peachy when it comes to custom roms.
Current state:
The device is not recogniced by the flash tool of Sony, or the suite.
Could someone point fingers where to look for a solution?
Click to expand...
Click to collapse
I bricked mine yesterday at 11 pm,couldnt sleep right cause of the panic. xD
My C5303 has a LOCKED BOOTLOADER too,and I was stuck at the SONY logo.
I downloaded Flashtool.
I installed Flashtool.
This procedure is neccessary in order to install fastboot/flashmode/adb drivers.If you already did it,skip it.
If ur on windows 8,move ur mouse coursor to top right of the screen,a toolbar will appear.
Then click SETTINGS.Then click CHANGE PC SETTINGS.When it opens,select UPDATE & RECOVERY.Select RECOVERY.Select ADVANCED STARTUP.When it reboots,you will see a blue background and an option,i think it is TROUBLESHOOT,anyways,look for DISABLE DRIVER SIGNATURE VERIFICATION.But as I remember,i was put with a choice of selecting a number,and i pressed 7-DISABLE DRIVER VERIFICATION.
The PC will boot like nothing is changed,but now u can install the drivers.
Go to Flashtool/drivers and open the installation program
Select "Flashmode drivers","fastboot drivers" and "common drivers for Viskan board(these are the ADB drivers ONLY for the Xperia SP)"
The PC will ask you to allow the driver installation,allow all of them.Reboot ur pc again,and connect ur phone in flashmode for the pc to link the flashmode drivers to ur Xperia SP,then u can begin.
Download this firmware FROM THIS LINK
http://www.xperiadownload.cz/phocadownload/userupload/download/2013/SP/C5303_12.1.A.1.205_CE.rar
extract the ftf file with any rar program,then move the .ftf file to the FIRMWARE folder in the directory where flashtool is installed,mine is C:/Flashtool.move the .ftf file into (DRIVE):/Flashtool/firmwares
Open Flashtool,select Flash with Flashmode,wait for the program to say that u can connect ur xperia sp with the PC.To enter Flashmode hold the Volume DOWN button while connecting the phone to the PC.
I reccommend using the SONY cable,as i have a feeling it is the best one for these things.
Let Fashtool flash everything,do not touch the device at all until the Flashtool allows you to do so.
Here mate
http://forum.xda-developers.com/xperia-sp/general/root-ultimate-noobs-guide-to-rooting-t2845520
Thanks for all the answers so far...
I figured, taht in the flashtool the firmware for the device is not listet, although it is in the respektive directory. am I blind, or am I missing something?
It however does offer a X10 installation, what ever that is, when it is at home
Look for an FTF file on this forum.
Make sure you download and flash the correct one!
kevke said:
Thanks for all the answers so far...
I figured, taht in the flashtool the firmware for the device is not listet, although it is in the respektive directory. am I blind, or am I missing something?
It however does offer a X10 installation, what ever that is, when it is at home
Click to expand...
Click to collapse
I have found this source: http://xperiafirmware.com/8-firmware/37-sony-xperia-sp-c5303
It is recognised by the flash tool and therefore, I believe it works well... I'll keep you folks postet... FINGERS CROSSED
Okay folks, you can uncross your fingers... Thanks to all of you, the call is back to life!

Long way to custom ROM

Hello. I have Sony Xperia T lt30p. Some time ago I decided to try to obtain some new version of Android in my phone. Since Sony no longer provide updates to my phone I have to do it by my self. I tried to study what needs to be done and try not to hurry things but there are still some major setback I cannot overcome. I am able to atleast Root my device but I unable to get further. Next step on my list is to unlock my bootloader. I check that my phone is unlockable but I stragle with part where I should connect my phone in fastboot mode and update drivers in my computer. For some reason my phone appears in Device manager just for few seconds and thus I am unable to upgrade drivers. I tried to click on update and choose where my drivers are stored, than my phone disapear from device manager but I keep that window open, then disconnect my device, connect again and click next but updating will fail again. I tried to Google it but I find only one post about this problem and the person solved it.by method I just described. Can someone please help me? I would like to use this thread as solver of my problems to get to higher android version. I hope I will be able to close this post soon
Thank you for your help.
I've had problems with that too, just do thisand repeat the process agin
Also read this guide about unlocking xperia bootloader
Thank you, it worked! Only diffence is that after using method from your first link I instaled this:
http://forum.xda-developers.com/showthread.php?t=2635830
and then unlocked my bootloader. Great!
I now have my phone rooted and unlocked.
Next step is to install custom recovery and then some custom ROM.
Do you have any advice guys? What kind of custom ROM would you suggest me? I have Sony Xperia T lt30p with android 4.3.
Just simply 4.3? Or 5.1.1? And why? And do you know any good guide?
Thank you very much

Categories

Resources