Related
Hello guys,
I tried to flash this rom using Odin:
I9220LP5_ROOTED.tar
Q1_20110914_16GB.pit
Q1_EUR_bridge_ddi_init_bootloader.tar
But unfortunately, Odin stops at "Setup Connection.." more than 30 minutes. I dont know why..?
I thought it will not continue, so i closed Odin and disconnect the cable, reboot in download mode, tried to flash another Pre-rooted rom (SGN_XX_OXA_KJ1_FACTORYFS.tar) (Dr.Ketan).
While Flashing,, the screen became black.....
Flashing successfully finished..
Screen Still Black but the phone started normally, i am hearing the sounds and can use the [Back & Menu] button, touching on the black screen is working also.
Switch off/on, can not see the booting logo (SAMSUNG GALAXY NOTE GT-N7000)
I tried to flash the ROM again, it still black.
What do you think guys of this problem. ?
sangahlolo said:
Hello guys,
I tried to flash this rom using Odin:
I9220LP5_ROOTED.tar
Q1_20110914_16GB.pit
Q1_EUR_bridge_ddi_init_bootloader.tar
``````
I tried to flash the ROM again, it still black.
What do you think guys of this problem. ?
Click to expand...
Click to collapse
Did you flash the LP5, pit and boot loader knowing what they do? I mean did you do it for development purpose or this is your working ROM?
when you put it in download mode can you see its logo, if you do just flash back to stock, and if you get the same problem just flash chainfire (in my signature), and do a full wipe then try it again, that should fix your problem
cabloomi said:
and if you get the same problem just flash chainfire (in my signature)
Click to expand...
Click to collapse
You are advising a guy with a bricked Samsung Galaxy Note to flash a SGSII kernel? Are you insane?
sangahlolo, don't listen to him, he's talking absolute nonsense here.
anilisanil said:
Did you flash the LP5, pit and boot loader knowing what they do? I mean did you do it for development purpose or this is your working ROM?
Click to expand...
Click to collapse
Its leaked [ICS] Rom for SGN, i got if from a thread in development section "I9220_ZC_LP5_REPACK.zip"
cabloomi said:
when you put it in download mode can you see its logo, if you do just flash back to stock, and if you get the same problem just flash chainfire (in my signature), and do a full wipe then try it again, that should fix your problem
Click to expand...
Click to collapse
In every mode i don't see anything on the screen:
Normal Mode
Download Mode
Recovery Mode
Flashing was going normally, but the screen went out suddenly during the process!
I also tried the original firmware, same thing [Black Screen].
chasmodo said:
You are advising a guy with a bricked Samsung Galaxy Note to flash a SGSII kernel? Are you insane?
sangahlolo, don't listen to him, he's talking absolute nonsense here.
Click to expand...
Click to collapse
Its OK dude, He maybe meant to click the link and see the other methods, of course i will not use SGSII for SGN.
ِAfter all, I am answering all phone calls without knowing who's the caller .. LOL
ANY HELP DEAR EXPERTS ?!?!?!?!?!?!?!?
sangahlolo said:
ANY HELP DEAR EXPERTS ?!?!?!?!?!?!?!?
Click to expand...
Click to collapse
I'm afraid it's off to the Samsung service center for you, mate. You tried to flash a very dangerous Rom without reading the first couple of lines CF wrote.
Chainfire said:
Here is the I9220 ZC LP5 repack for N7000. Includes CF-Root for LP5, CWM, etc.
This is a pretty dangerous flash. Personally, I would just skip this firmware altogether, but there is currently no way to revert. If you continue, you may be insane. I wish I never flashed this crap.
Click to expand...
Click to collapse
You flashed the LP5 bootloader. Game over.
chasmodo said:
I'm afraid it's off to the Samsung service center for you, mate. You tried to flash a very dangerous Rom without reading the first couple of lines CF wrote.
Click to expand...
Click to collapse
OMG
I feel frustrated.
but flashing did not complete for this rom.
I am thinking to --> UNROOT --> Flash original firmware --> Send back to the agent for replacement...
LordManhattan said:
You flashed the LP5 bootloader. Game over.
Click to expand...
Click to collapse
Thanks for the good news
sangahlolo said:
Its leaked [ICS] Rom for SGN, i got if from a thread in development section "I9220_ZC_LP5_REPACK.zip"
Click to expand...
Click to collapse
I got that. You should have read the instructions before flashing. But I wonder how your phone booted if your boot loader is bust.
But if you havewarranty don't mess with your phone
Sent from my GT-N7000 using XDA
i have the lg optimus black and i just rooted it but i dont know how to get in the recovery mode somebody can help me ?
tnx
Eword said:
i have the lg optimus black and i just rooted it but i dont know how to get in the recovery mode somebody can help me ?
tnx
Click to expand...
Click to collapse
Try downloading Rom manager from the market and then choose to rebbot in recovery mode
Download rom manager free, go in" install recovery", the app flash then the recovery partition for you,,
Sent from my LG-P970 using jelly bean
I have other question. I installed cwm and flashed some rom but now I am stuck on bootanimation bootloop because something went wrong. How can I go to recovery now to fix it?
Acuap said:
I have other question. I installed cwm and flashed some rom but now I am stuck on bootanimation bootloop because something went wrong. How can I go to recovery now to fix it?
Click to expand...
Click to collapse
Whats some rom? Be more precise please. You ll always be able to unbrick it using smartflash. But maybe you should simply use an unrooted rom... just use b2c tool and the option emergency recovery. And then first read, what you have to do, what it does and which kind of results you will be confronted with, then try again.
Dont mean to flame, but it seems you already did it wrong twice...
Sent from my LG-P970 using xda app-developers app
Nope. Once. My sdcard somehow unmounted itself while installing Marvel rom 9. Dunno why. Well, gonna try your method tomorrow. Thanks for tips!
Acuap said:
Nope. Once. My sdcard somehow unmounted itself while installing Marvel rom 9. Dunno why. Well, gonna try your method tomorrow. Thanks for tips!
Click to expand...
Click to collapse
have you already tried using G-recovery?
I think you can do it in Marvel ROM, you just have to start pressing for a few times the G button while booting
LGP970 said:
have you already tried using G-recovery?
I think you can do it in Marvel ROM, you just have to start pressing for a few times the G button while booting
Click to expand...
Click to collapse
Worked like charm. Thank you!
For some reason I am unable to flash kernels and ROMs. I am still rooted and unlocked so I'm not sure what the problem is. I've tried both TWRP and CWM.
EDIT: I should also note that the phone reboots when I try to flash.
tkoreaper said:
For some reason I am unable to flash kernels and ROMs. I am still rooted and unlocked so I'm not sure what the problem is. I've tried both TWRP and CWM.
EDIT: I should also note that the phone reboots when I try to flash.
Click to expand...
Click to collapse
Are you also S-OFF? It really shouldn't matter, though.
Rirere said:
Are you also S-OFF? It really shouldn't matter, though.
Click to expand...
Click to collapse
No, never have.
This has happened to me before try flashing Twrp again or another thing that worked for me was flashing a Rom without a custom kernel and usually fixed the problem for me weird
Sent from my HTCONE using xda premium
dandan2980 said:
This has happened to me before try flashing Twrp again or another thing that worked for me was flashing a Rom without a custom kernel and usually fixed the problem for me weird
Sent from my HTCONE using xda premium
Click to expand...
Click to collapse
No luck. I relocked and unlocked. I tried flashing a ROM without a kernel and the same thing happens... The phone reboots. The only thing I really have left to try is to RUU back to stock and start over. I was able to flash a kernel using fastboot though.
tkoreaper said:
No luck. I relocked and unlocked. I tried flashing a ROM without a kernel and the same thing happens... The phone reboots. The only thing I really have left to try is to RUU back to stock and start over. I was able to flash a kernel using fastboot though.
Click to expand...
Click to collapse
what ROM and kernel are you trying to flash?
slimc84 said:
what ROM and kernel are you trying to flash?
Click to expand...
Click to collapse
It was just the wolfpack kernel, but I got it now by flashing with fastboot... Recovery still won't flash ROMs and Kernels though.
tkoreaper said:
It was just the wolfpack kernel, but I got it now by flashing with fastboot... Recovery still won't flash ROMs and Kernels though.
Click to expand...
Click to collapse
that is very odd. can you download twrp and flash it in fastboot and try again? I know this has been an issue on other devices and apparently it can be fixed by flashing the recovery in fastboot.
slimc84 said:
that is very odd. can you download twrp and flash it in fastboot and try again? I know this has been an issue on other devices and apparently it can be fixed by flashing the recovery in fastboot.
Click to expand...
Click to collapse
Already tried that as well.
tkoreaper said:
Already tried that as well.
Click to expand...
Click to collapse
I'm at a loss man. I've never had an issue with TWRP.
slimc84 said:
I'm at a loss man. I've never had an issue with TWRP.
Click to expand...
Click to collapse
Strange issue indeed. I ended up having to completely start from scratch to get it to work (RUU > Unlock > Flash)
tkoreaper said:
Strange issue indeed. I ended up having to completely start from scratch to get it to work (RUU > Unlock > Flash)
Click to expand...
Click to collapse
Wish I could have been more help but glad that you are good to go.
Hi! I have an lg OB running ics 4.0.4(V30B). The phone it's rooted and I have CWM installed from Rom Manager. I can acces Recovery from Rom Manager and with the phone off ( VOLUME PLUS + G KEY). The problem is that I can't flash any Rom bellow ics (not even with Smart Flash Tools) without getting bootloops. I can flash Roms based on ics and above( IZS,CM10.1,NAMELESS ROM NIGHTLIES 4.4.4).
Could someone help me?
Nobody?
JoKeR[RO-VL] said:
Nobody?
Click to expand...
Click to collapse
I was hoping you fixed the issue. I don't know what to do.
It's a matter of unlocking the boot loader. Once you do that, you can jump back and forth between ICS-based ROMs and everything else.
Gingerbread ROMs include the boot loader (marvel and Huexxx).
androcraze said:
I was hoping you fixed the issue. I don't know what to do.
It's a matter of unlocking the boot loader. Once you do that, you can jump back and forth between ICS-based ROMs and everything else.
Gingerbread ROMs include the boot loader (marvel and Huexxx).
Click to expand...
Click to collapse
Man I can flash ICS-based ROMs .JB and KK, I can't flash GB stock or GB-based ROMs, not even with SFT.
I think the bootloader it's unlocked because I can acces CWM from switch off phone(key combo)....I am confused because i read many tutorials but they are contradictory
That happends also with me 2 times.
Just flash CWM recovery again.
ptxpaulo said:
That happends also with me 2 times.
Just flash CWM recovery again.
Click to expand...
Click to collapse
Already tried....when i try to flash a GB ROM stock or custom GB-based Rom I get stuck in a bootloop.Same story with Smart Flash Tools...SFT says "succes", I hear the "ta daaa" sound ,phone reboots but stuck in a bootloop.
JoKeR[RO-VL] said:
Already tried....when i try to flash a GB ROM stock or custom GB-based Rom I get stuck in a bootloop.Same story with Smart Flash Tools...SFT says "succes", I hear the "ta daaa" sound ,phone reboots but stuck in a bootloop.
Click to expand...
Click to collapse
Try toii install a ROM right after rebooting from flash.
What I did is: Install a JB ROM, After, I reinstall CWM with ADB, reboot and then I could install any rom.
ptxpaulo said:
Try toii install a ROM right after rebooting from flash.
What I did is: Install a JB ROM, After, I reinstall CWM with ADB, reboot and then I could install any rom.
Click to expand...
Click to collapse
Sorry but how to install CWM with ADB? I've installed CWM(6.0.1.4) only from Rom Manager....
JoKeR[RO-VL] said:
Sorry but how to install CWM with ADB? I've installed CWM(6.0.1.4) only from Rom Manager....
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1613183
ptxpaulo said:
http://forum.xda-developers.com/showthread.php?t=1613183
Click to expand...
Click to collapse
Doesn't work and its stuck on lg logo now
Try to flash first original Froyo 2.2.2 , and then you can upgrade to GB ! Worked for me !
seby24gl said:
Try to flash first original Froyo 2.2.2 , and then you can upgrade to GB ! Worked for me !
Click to expand...
Click to collapse
Did you unlocked the bootloader first? can you put a link with your froyo and SFT?
I am from Romania so I need an Europe Open
No, I don't tried to unlock bootloader, but like you , I got the bootloops every time I downgrade from ICS, Nameless or cyanogen roms . I use original Froyo - flashed with SFT , then upgrade to GB with Cwm recovery patch- flashed with SFT, then boot to recovery and install Nameless. I will give you the links, once I uploaded to my dropbox.
Here, I hope will help you : https://www.dropbox.com/s/psniks1yvqwymy9/firmware v10a-europe-p970.rar
seby24gl said:
No, I don't tried to unlock bootloader, but like you , I got the bootloops every time I downgrade from ICS, Nameless or cyanogen roms . I use original Froyo - flashed with SFT , then upgrade to GB with Cwm recovery patch- flashed with SFT, then boot to recovery and install Nameless. I will give you the links, once I uploaded to my dropbox.
Here, I hope will help you : https://www.dropbox.com/s/psniks1yvqwymy9/firmware v10a-europe-p970.rar
Click to expand...
Click to collapse
Thanks bro! Hope it works.
seby24gl said:
No, I don't tried to unlock bootloader, but like you , I got the bootloops every time I downgrade from ICS, Nameless or cyanogen roms . I use original Froyo - flashed with SFT , then upgrade to GB with Cwm recovery patch- flashed with SFT, then boot to recovery and install Nameless. I will give you the links, once I uploaded to my dropbox.
Here, I hope will help you : https://www.dropbox.com/s/psniks1yvqwymy9/firmware v10a-europe-p970.rar
Click to expand...
Click to collapse
JoKeR[RO-VL] said:
Thanks bro! Hope it works.
Click to expand...
Click to collapse
It's not working. Don't know what to try
UP! When I use the bootloader unlocker app the flashing process take about 2-3 seconds and the app closing by itself without any message like "succes". I even tried to flash a u-boot img uploaded by huexxx and at the second reboot the phone stucks on lg logo without flashing leds
JoKeR[RO-VL] said:
UP! When I use the bootloader unlocker app the flashing process take about 2-3 seconds and the app closing by itself without any message like "succes". I even tried to flash a u-boot img uploaded by huexxx and at the second reboot the phone stucks on lg logo without flashing leds
Click to expand...
Click to collapse
Did you already try the alternative way without the app? Which means load the files to your sdcard and afterwards type the dd if=xxxx of=xxxx? This could show if it works or fails. And did you ever flash the LU5900 port? So the early ICS ROM released by Redy, Gabwerkz and me. Try the manual unlock first.
Sent from my XT1052 using XDA Free mobile app
N00BY0815 said:
Did you already try the alternative way without the app? Which means load the files to your sdcard and afterwards type the dd if=xxxx of=xxxx? This could show if it works or fails. And did you ever flash the LU5900 port? So the early ICS ROM released by Redy, Gabwerkz and me. Try the manual unlock first.
Sent from my XT1052 using XDA Free mobile app
Click to expand...
Click to collapse
NO I did not flash the LU5900 port.Where do I need to type dd if ? I use windows 7 on my laptop.
JoKeR[RO-VL] said:
NO I did not flash the LU5900 port.Where do I need to type dd if ? I use windows 7 on my laptop.
Click to expand...
Click to collapse
As written in the thread, type it into terminal emulator (an app). Read the thread carefully please.
Sent from my XT1052 using XDA Free mobile app
N00BY0815 said:
As written in the thread, type it into terminal emulator (an app). Read the thread carefully please.
Sent from my XT1052 using XDA Free mobile app
Click to expand...
Click to collapse
OK I have the terminal emulator on my phone.
I've read the thread and it says "Move this two files, bootloader and recovery to the root of memory sdcard;
Enter in the command line
su
dd if=/sdcard/u-boot.img of=/dev/block/mmcblk0p2
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p4
And reboot or reboot recovery."
I have downloaded all on my laptop(bootloader recovery and su) but I am confuse....what's with that "su"?
Do I have to put it on the root of the sdcard too?
Sorry for my noob question
I'm rooted and on a custom rom on my Z1 but I've lost all recoverys since I installed it. I've tried using the TWRP app to install and Flashify but I just get a error saying " recovery partition not found " can anyone help me at all get TWRP or some recovery on my Z1?
I've no pc at the moment so I have to try get a recovery installed using just my phone.
Thx & I really hope someone can help I'm not liking the rom I'm on at all, rather stock rooted with xposed probably some kernel too.
RiceydDr0id said:
I'm rooted and on a custom rom on my Z1 but I've lost all recoverys since I installed it. I've tried using the TWRP app to install and Flashify but I just get a error saying " recovery partition not found " can anyone help me at all get TWRP or some recovery on my Z1?
I've no pc at the moment so I have to try get a recovery installed using just my phone.
Thx & I really hope someone can help I'm not liking the rom I'm on at all, rather stock rooted with xposed probably some kernel too.
Click to expand...
Click to collapse
Which rom do you use? Probably you should shut down your phone and then press simultaneously power and volume down. Up to when you hear the second vibrate, now you should only push volume down. Then your recovery should appear
DSTRÍIKER Rom bud and can't get into any recovery at all.... It's really annoying
RiceydDr0id said:
DSTRÃIKER Rom bud and can't get into any recovery at all.... It's really annoying
Click to expand...
Click to collapse
Stil got no pc?
Nope :-/
RiceydDr0id said:
Nope :-/
Click to expand...
Click to collapse
Bootloader locked or unlocked??
Remeber the more info you give less question I have to ask.
Model, rom, bootloader, root status etc
Unlocked bud
Then flash kernel image from Rashr app. Choose any stock based kernel. I like ok kernel. In the zip extract the boot image and then flash it through Rashr app from playstore. There you go kernel and recovery.
IL try now stock kernel only yea?
RiceydDr0id said:
IL try now stock kernel only yea?
Click to expand...
Click to collapse
Stock based kernel. Like ok kryptonian artemesia
I just did it with rashr & ok kernl... now my phone wont turn on!! just black with d red LED flashing on & off. Plzzzz god someone help me
Please tell me i can fix this
RiceydDr0id said:
Please tell me i can fix this
Click to expand...
Click to collapse
I am here don't you worry. First are you sure you are locked bootloader. Second please tell me exactly what you did. You can contact me on Hangouts for quick reply. Check your inbox I have sent you my mail id.
I said its unlocked iv a brick now ;-( im using my navidia shield to contact u..
RiceydDr0id said:
I said its unlocked iv a brick now ;-( im using my navidia shield to contact u..
Click to expand...
Click to collapse
Check your inbox I have sent you my mail id. Contact me there
What was the battery when you flashed it.
I have the problem too. I installed twrp from cmd everything was OK but cannot open the recovery. No led work when booting.
nemes480 said:
I have the problem too. I installed twrp from cmd everything was OK but cannot open the recovery. No led work when booting.
Click to expand...
Click to collapse
Did you ever flash. 236 fw??
If not this is the right time you have to do it once.
I did it maybe 100 times. But I m sorry i did it 101 time .5 miutes before your post and still doesnt work
Not just this type of the install give me error...