Database Develop

XT1053 : Returning to stock & changing locale

Hi,
I own a Moto X Developer Edition, so a XT1053 device.
After some issue, I decided to return to full stock, 4.4.2, and possibly changing the locale to get a full French support.
I followed the instructions from this thread to return to stock. And instead of choosing the original firmware, I took the French one from this list.
Everything run smoothly without any issue, except one annoying problem for a phone, the radio doesn't work, so no GSM connectivity. The phone says the radio is unactivated.
I think there is a way to "mix" some img files from the original Dev Edition and the FR one to get things working, but I don't know exactly. Any help would be greatly appreciated.
Thanks.

Hi,
Really need some help on this one because as I didn't get any answer, I decided to reflash the official 4.4 firmware to get my radio back. But as the Moto X has been flashed with the French 4.4.2 rom, it refuses to be downgraded to 4.4.
Any idea? Thanks.

Please please please please read up on these things before you end up flashing!
I'm glad I could answer before you ended up hard bricking your phone, your current bootloader is based on the 4.4.2 rom, so it is impossible to downgrade to previous images. If you were stubborn and skipped this information, you would have tried to manually flash the 4.4 image with mfastboot commands and just purposely left out the bootloader, if you did this, then as soon as you got the 4.4.2 OTA to update and accepted it, you would have hard bricked your phone.
Now with all that said, it may be possible to take the NON-HLOS.bin and fsg.mbn from the 4.4 SBF T-Mobile/Dev Edition image and try to flash that radio/modem to your phone. I would make a backup before doing this though. just follow the fastboot commands for the modem and you should be okay. Remember to follow them exactly.
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
I am not entirely sure that you can use the 4.4 modem with a 4.4.2 rom. There may have been some firmware changes that prevent this from working, but you are welcome to try, I would personally wait until a T-Mobile/Dev Ed SBF 4.4.2 image appears and try the same procedure with that instead, but you are welcome to "chance" it

Thanks for the help.
In the meantime, I've read this thread and this one. So, I tried to flash the Rogers Canada 4.4.2 image. Everything runs fine, but still no radio.
But, I currently run the instructions from here to return to stock, and so I didn't know I had to flash NON-HLOS.bin file. I'm going to try this right now.
Thanks again.

Just tried to flash the NON-HLOS.bin file by following your instructions. Tried with both Rogers Canada sbf and with the Official 4.4 image. Same, no radio.
Wait for the official Developer Edition 4.4.2 or I'll contact Motorola. Does somebody know if an there is some ETA from this official image?
Thanks.

romut said:
Thanks for the help.
In the meantime, I've read this thread and this one. So, I tried to flash the Rogers Canada 4.4.2 image. Everything runs fine, but still no radio.
But, I currently run the instructions from here to return to stock, and so I didn't know I had to flash NON-HLOS.bin file. I'm going to try this right now.
Thanks again.
Click to expand...
Click to collapse
Just to give you a heads up, the NON-HLOS.bin file is where most of the modem actually is (all 50-60MB of it), I'll send a PM to the topic creator, because it's not giving the community the right information, they are missing that critical piece.
Be careful with your bootloader, the FR version may be the same as the UK bootloader (30.B3), the Rodgers version is (30.B4) meaning you would no longer be able to flash the whole SBF for the FR version because it would have a lower bootloader. However, you would be safe by just flashing the system image, but I would recommend not taking any OTA updates if you flash it.
Also remember that radios require a reset/power down, because it needs to get the information from the SIM card to use the particular radio frequencies. Also make sure the APN is correctly configured, this may also cause an issue.
There may be another Developer Edition 4.4 image directly from Moto that you could try, I think it takes 24 hours for them to get back with you giving you the link to their google drive though, however, it may be the same as the T-Mobile one on SBF.
You could also attempt getting the patched files from a 4.4.2 OTA image and merging it with a 4.4 radio (basically over-writing some of the files in the 4.4 version), I am unsure if this would work, but in theory it should, since that's what is happening during the update. However, I don't know if there are checks or anything, don't brick your phone because of me

Thanks for your message.
I've tried to flash the modem part only, then switch off/on the phone. No way, no radio. As I flashed the Rogers firmware, yes, my bootloader has been upgraded to 30B4.
Only way now is to wait for the official Developer Edition 4.4.2 zip, or to contact Motorola.

romut said:
Thanks for your message.
I've tried to flash the modem part only, then switch off/on the phone. No way, no radio. As I flashed the Rogers firmware, yes, my bootloader has been upgraded to 30B4.
Only way now is to wait for the official Developer Edition 4.4.2 zip, or to contact Motorola.
Click to expand...
Click to collapse
Stuck between a rick and a hard place , been trying to warn folks not to flash the new 4.4.2 sbf firmware, the list gets bigger and bigger by the day if people who either hard brick or have no radio signal. I actually tried to just have a warning sticky for this reason and was denied by the moderators. All.I can suggest is flash the modem for south american variants as there 4.4.2 sbf firmware is available, also flash the fsg.mbn file too
Sent on my Gummy running Lenoto X

flashallthetime said:
Stuck between a rick and a hard place , been trying to warn folks not to flash the new 4.4.2 sbf firmware, the list gets bigger and bigger by the day if people who either hard brick or have no radio signal. I actually tried to just have a warning sticky for this reason and was denied by the moderators. All.I can suggest is flash the modem for south american variants as there 4.4.2 sbf firmware is available, also flash the fsg.mbn file too
Sent on my Gummy running Lenoto X
Click to expand...
Click to collapse
He wouldn't have been able to flash a 4.4 image anyways because he used the 4.4.2 FR image. The only reason to upgrade via OTA/SBF is if you are certain that your phone matches the SBF. Otherwise there are too many possible complications to list here. His best bet is the NON-HLOS and fsg from that 4.4.2 version since it has the 4.4 modem and the fixes/modifications of the 4.4.2 as well. Or he could try to "manually" update the T-mobile 4.4 SBF modem, by copying the T-mobile 4.4.2 OTA modem patches and overwriting the select few files in the SBF, then flashing the new image.
However, in reality, it's probably best to wait for the "official" SBF anyways.

mastarifla said:
He wouldn't have been able to flash a 4.4 image anyways because he used the 4.4.2 FR image. The only reason to upgrade via OTA/SBF is if you are certain that your phone matches the SBF. Otherwise there are too many possible complications to list here. His best bet is the NON-HLOS and fsg from that 4.4.2 version since it has the 4.4 modem and the fixes/modifications of the 4.4.2 as well. Or he could try to "manually" update the T-mobile 4.4 SBF modem, by copying the T-mobile 4.4.2 OTA modem patches and overwriting the select few files in the SBF, then flashing the new image.
However, in reality, it's probably best to wait for the "official" SBF anyways.
Click to expand...
Click to collapse
No just wait for the sbf firmware
Sent on my Gummy running Lenoto X

flashallthetime said:
Stuck between a rick and a hard place , been trying to warn folks not to flash the new 4.4.2 sbf firmware, the list gets bigger and bigger by the day if people who either hard brick or have no radio signal. I actually tried to just have a warning sticky for this reason and was denied by the moderators. All.I can suggest is flash the modem for south american variants as there 4.4.2 sbf firmware is available, also flash the fsg.mbn file too
Sent on my Gummy running Lenoto X
Click to expand...
Click to collapse
I know you're doing a dawn good job at warning people :good: I should have read some threads before flashing, my stupidity ! :laugh:
I'll try to contact Motorola and see what can be done. Problem is this is a DE bought in USA, and I'm in France. Not the best case.

romut said:
I know you're doing a dawn good job at warning people :good: I should have read some threads before flashing, my stupidity ! :laugh:
I'll try to contact Motorola and see what can be done. Problem is this is a DE bought in USA, and I'm in France. Not the best case.
Click to expand...
Click to collapse
Your screwed, the European boot loader is 30.b3 and America is 30.b4, the modem aren't compatible, you can't run European modems with american boot loader and visa versa , call moto
Sorry for your situation. Have you tried flashing the French firmware?
Sent on my Gummy running Lenoto X

flashallthetime said:
Your screwed, the European boot loader is 30.b3 and America is 30.b4, the modem aren't compatible, you can't run European modems with american boot loader and visa versa , call moto
Sorry for your situation. Have you tried flashing the French firmware?
Sent on my Gummy running Lenoto X
Click to expand...
Click to collapse
Yes that's what I wrote, I've seen the bootloader has been upgraded. As the official ROM for the Moto X DE already includes the french, it's not a big deal for me to get stuck with the ghost.en.US ROM. But as I've already flashed a 4.4.2 (the french one), I need the official 4.4.2 which is not yet available.
I've read in another thread, Motorola has accepted to exchange some phones in that case, I cross my fingers.

Hi,
I had a chat yesterday with the Motorola Service. This issue can be covered by the warranty only for Developer Edition. Now my problem is the cost to send the Moto from France to the US, but I think this may be interesting for people with the same issue.
Or we have to wait for the official release of the T-Mobile 4.4.2 ROM, but I couldn't get an ETA.

stock 4.4.2 boot.img
i flashed faux123 custom kernel and was not aware it was for 4.4 the updater app allowed me to install it
now my phone is screwed up
does anyone know where I can find the stock kernel image for 4.4.2 on unlocked xt1053 dev edition

Update failed?? Need help

ok guys so i have the american moto x unlocked and flashed 4.4.2 EU o DE o GB.
I got the notification to update to 4.4.4 but after the phone reboots and install a half,it s stopped and say that the Instalation failed.
someone have some ideea or advice how to make it works?

danger2u said:
ok guys so i have the american moto x unlocked and flashed 4.4.2 EU o DE o GB.
I got the notification to update to 4.4.4 but after the phone reboots and install a half,it s stopped and say that the Instalation failed.
someone have some ideea or advice how to make it works?
Click to expand...
Click to collapse
I never advise anyone to flash a different carrier or country's ROM, but since you already have...
It is probably because you have installed custom recovery. So FIRST, figure out exactly which country variant you have flashed to (eu, de, gb), then flash just the stock recovery.img (from the Full 4.4.2 SBF for the country variant you are on) to the phone using fastboot. It will probably install afterwards.
If it doesn't, you may need to also flash the system.img (using mfastboot, not regular fastboot) from the same SBF/FXZ -- this will un-do any changes you have made to /system that might be preventing the OTA from installing.
Good Luck

samwathegreat said:
I never advise anyone to flash a different carrier or country's ROM, but since you already have...
It is probably because you have installed custom recovery. So FIRST, figure out exactly which country variant you have flashed to (eu, de, gb), then flash just the stock recovery.img (from the Full 4.4.2 SBF for the country variant you are on) to the phone using fastboot. It will probably install afterwards.
If it doesn't, you may need to also flash the system.img (using mfastboot, not regular fastboot) from the same SBF/FXZ -- this will un-do any changes you have made to /system that might be preventing the OTA from installing.
Good Luck
Click to expand...
Click to collapse
ok i will try to flash the entire firmware and let u know if in this way it s works or no.
i flashed the European firmware on T mobile Moto x because have more languages italian included.

[Q] recovery for 4.4.3

Hi guys
i am on 4.4.3 in moto x and i received 4.4.4 for ota but i cant update because i unlocked bootloader and twrp in recovery,
how do i install 4.4.3,
i think install a recovery stock but i did not find recovery stock for 4.4.3 only for 4.4.2
or reinstall all stock for 4.4.2 make it downgrade.
what do you think?

You can likely find 4.4.3 firmware or even 4.4.4 and flash it manually from the links here,
http://forum.xda-developers.com/showthread.php?t=2923347
If you downgrade you could brick. If you successfully downgrade and take an OTA, you will definitely brick.
So not a wise choice. ?
Also, questions go in the Q&A section. For future reference. I'll ask this be moved. ?
---------- Post added at 10:18 AM ---------- Previous post was at 09:48 AM ----------
This guide has sections for many tasks, including flashing firmware.
http://forum.xda-developers.com/showthread.php?t=2603358
If you use the fastboot method, you could likely just flash your stock recovery once you get the proper firmware, and if you need to, mfastboot can flash the system image. Should be good for OTA then.
But again, if you find the 4.4.4 firmware for your model... Flashing it fresh manually is always my preference. ?

sorry i was think posted on Q&A,
so i install stock 4.4.3 and began wait for ota 4.4.4
or directly flash 4.4.4?
well, are not problem install directly 4.4.4 and blick mi phone?
***************
sorry i dont see the continuation answer
so, i try to find the 4.4.4 fw for mi motox and flashing via rsd??

htc-desire5 said:
sorry i was think posted on Q&A,
so i install stock 4.4.3 and began wait for ota 4.4.4
or directly flash 4.4.4?
well, are not problem install directly 4.4.4 and blick mi phone?
***************
sorry i dont see the continuation answer
so, i try to find the 4.4.4 fw for mi motox and flashing via rsd??
Click to expand...
Click to collapse
If you find the proper 4.4.4 for your device, that's how I personally prefer to do it.
Be aware it'll wipe your device with RSD though. Apps, pics, music, whatever... Gone . So you can move anything you want to keep to your PC.
Using the fastboot /mfastboot method will not wipe your stuff. Pics, music and everything. As long as you don't erase or flash userdata. Apps still gone though.
Your choice. See the guide I linked for instructions.
Good luck!
And once on 4.4.4...you can not ever downgrade.

thanks, i didnt find 4.4.4 for mi device only 4.4.3 the same like i use today,
i can use rds for flash the 4.4.3 and wait for ota without any problems?

I'm pretty sure only the XT1053 aka TMobile/Developer Edition has a 4.4.3 firmware. Everyone else went from.4.4.2 straight to 4.4.4.
You can confirm by checking About and looking at firmware version it should end with Retail.en.US
If you just need the 4.4.3 recovery to flash and upgrade you can find it in the 4.4.4 OTA thread here under Reminders: http://forum.xda-developers.com/moto-x/general/xt1053-4-4-4-ota-update-zip-t2885484
If you want the 4.4.4 firmware you can find it in this discussion second post: http://forum.xda-developers.com/moto-x/moto-x-qa/help-xt1053-half-downgraded-t2934605

Yup ?
Same warning, RSD will erase everything on your phone. It will be as it was the day you bought it.

thanks
@dtg7 a screenshoot
mi device has Retail.en.US.
so if i understand, i can put directly 4.4.4 from this post??
http://forum.xda-developers.com/moto-x/moto-x-qa/help-xt1053-half-downgraded-t2934605

If you are T-Mobile, yup.
---------- Post added at 12:42 PM ---------- Previous post was at 12:42 PM ----------
Not another carrier.

really not, im from mexico and use telmex but really i dont why t-mobile.

I would wait for your firmware, unless someone confirms T-Mobile will work for you. If your radio doesn't work, or anything else, you'll be stuck on T-Mobile 4.4.4 and won't be able to then flash your stock 4.4.3 anymore.
Patience. You aren't really missing out on anything. ?

@Darth thank really i want update because the ota update appear and that's annoying, but well i try with 4.4.3 flash rsd and wait for ota in stock
well if i became a 4.4.4 for root only need supersu??
i question that if its convenient upgrade o wait in 4.4.3

htc-desire5 said:
@Darth thank really i want update because the ota update appear and that's annoying, but well i try with 4.4.3 flash rsd and wait for ota in stock
well if i became a 4.4.4 for root only need supersu??
i question that if its convenient upgrade o wait in 4.4.3
Click to expand...
Click to collapse
You're bootloader is definitely unlocked? Then yes, rooting is easy on 4.4.4.
?

wonder, thanks for everything @Darth
a moderator close that thread, my question was solved.

[Q] Go from 4.2.2 to 4.4.2 Unlocked, rooted, twrp

I have new Verizon Moto X Dev Edition. Messed up. Thought it was already on 4.4.2. Not, it's on 4.2.2. Unlocked bootloader and installed twrp and rooted. Wanting to update it to 4.4.2. Thinking from reading that I need to get back to stock recovery for OTA update if that is possible over wifi since phone is not activated yet. Can't find 4.2.2 stock recovery and not sure if that is what I need to do anyway. Is that what I need to do and/or is there a better way? Thanks

dukeoid said:
I have new Verizon Moto X Dev Edition. Messed up. Thought it was already on 4.4.2. Not, it's on 4.2.2. Unlocked bootloader and installed twrp and rooted. Wanting to update it to 4.4.2. Thinking from reading that I need to get back to stock recovery for OTA update if that is possible over wifi since phone is not activated yet. Can't find 4.2.2 stock recovery and not sure if that is what I need to do anyway. Is that what I need to do and/or is there a better way? Thanks
Click to expand...
Click to collapse
Well I too have a Dev Edition but is SIM-Unlocked so it isn't Verizon.
If all you want to do is update, you could install Custom ROM although you will lose Motorola's Active Display, Always Listening etc...
If you want complete stock and have to reflash TWRP and root your phone, you will need to flash the stock firmware using fastboot or a utility.

Finally found 4.2.2 . When trying RSD fail at gpt bin, also fails there with manual flashing. Any ideas?
Edit...Finally got it. Different version of 4.2.2 did it.

Alecegonce101 said:
Well I too have a Dev Edition but is SIM-Unlocked so it isn't Verizon.
Click to expand...
Click to collapse
Um, all VZW Moto Xs are SIM-unlocked.

dukeoid said:
Finally found 4.2.2 . When trying RSD fail at gpt bin, also fails there with manual flashing. Any ideas?
Edit...Finally got it. Different version of 4.2.2 did it.
Click to expand...
Click to collapse
I hope it wasn't the pre-camera 4.2.2....or you might be in a tough spot now.... Risking a brick. ?
---------- Post added at 10:09 AM ---------- Previous post was at 10:08 AM ----------
Unless the first firmware was also pre camera... Then you're OK.

dukeoid said:
I have new Verizon Moto X Dev Edition. Messed up. Thought it was already on 4.4.2. Not, it's on 4.2.2. Unlocked bootloader and installed twrp and rooted. Wanting to update it to 4.4.2. Thinking from reading that I need to get back to stock recovery for OTA update if that is possible over wifi since phone is not activated yet. Can't find 4.2.2 stock recovery and not sure if that is what I need to do anyway. Is that what I need to do and/or is there a better way? Thanks
Click to expand...
Click to collapse
dukeoid said:
Finally found 4.2.2 . When trying RSD fail at gpt bin, also fails there with manual flashing. Any ideas?
Edit...Finally got it. Different version of 4.2.2 did it.
Click to expand...
Click to collapse
Taking OTA's is incremental, so if you are the initial shipping 4.2.2 you need to take the first 4.2.2 w/camera OTA, then the 4.4 OTA, then the 4.4.2 OTA... a real time waster and pain in the rear.
Best way... Grab the SBF for the version you want to be on, and flash it... i.e. you mention going to 4.4.2, so... grab the 4.4.2 SBF and flash it.
Since you have a Dev Edition, why not just go to 4.4.4? it has a few bug fixes, and is stable. For me and many others its no worse than 4.4.2 as far as performance and battery.
Once you arrive on the ROM you want, you can flash TWRP and root.

KidJoe said:
Best way... Grab the SBF for the version you want to be on, and flash it... i.e. you mention going to 4.4.2, so... grab the 4.4.2 SBF and flash it.
t.
Click to expand...
Click to collapse
OTA'ed to 4.4.2. But for future reference you can skip versions and SBF to the one you want??

dukeoid said:
OTA'ed to 4.4.2. But for future reference you can skip versions and SBF to the one you want??
Click to expand...
Click to collapse
Yup! ?
As long as it's not a lower version.

dukeoid said:
OTA'ed to 4.4.2. But for future reference you can skip versions and SBF to the one you want??
Click to expand...
Click to collapse
OTA = Incremental. Only patches the changed/updated parts.
SBF/FXZ = "all inclusive" or "image files".. and overwrites entire partitions/parts.
So yes. You can just flash the newer SBF file. (As @Darth said... as long as the SBF you are flashing is NEWER than the version on your phone... i.e. NEVER DOWNGRADE)

[Q] Help downgrade to offical verizon dev from lollipop

Hey, i got the verizon dev edition with unlocked boktloader and root device i flash xt1052 rom to get the ota to 5.1
And aftet i flashed the baseband of 4.4.4 xt1060 to get my network work.
But now i want to get back to 4.4.4 of the verizon dev edition and i download tgz fille from the motorola site
And i wanted to flash it on rsd lite but i didnt have the xml fille there? So i dont know what to do now?
Ty for help

harel013 said:
Hey, i got the verizon dev edition with unlocked boktloader and root device i flash xt1052 rom to get the ota to 5.1
And aftet i flashed the baseband of 4.4.4 xt1060 to get my network work.
But now i want to get back to 4.4.4 of the verizon dev edition and i download tgz fille from the motorola site
And i wanted to flash it on rsd lite but i didnt have the xml fille there? So i dont know what to do now?
Ty for help
Click to expand...
Click to collapse
there is a high risk of bricking your device while downgrading http://forum.xda-developers.com/moto-x/general/info-warning-risks-downgrading-impacts-t3058202

It's highly risky to downgrade but if you persist just make sure your bootloader and partition table is not the one that got upgtaded with the latest 5.1 rom. If it is the latest then don't do it.
Sent from my Moto X using Tapatalk

You can downgrade completely to 4.4.4.
But don't take OTA, your phone will brick.
The safest way in my opinion is (if you want to downgrade);
- Flash entire official firmware of XT1060 to your phone.
- DON'T TAKE OTA
- Wait for full firmware of XT1060(5.1)
- Flash full firmware of XT1060(5.1)
But if you want to play with 5.1, you can try this;
In my case, I have XT1056, and I wanted to play around with 5.1, so I converted from XT1056(4.4.4) to XT1053(4.4.4), then took OTA to XT1053 (5.1).
After that I tried AOSP but my bluetooth headset had a problem with phone function, then I decided to go back to official firmware again.
Since there is no Lollipop image for XT1053 or XT1056 now, I had to flash another variants like XT1052 and XT1058, but I got no signal.
I had to downgrade to XT1056(4.4.4) and using it for a day. After that I found out that file size of fsg.mbn differ by variants, then I downloaded XT1053(5.1 OTA) to get it.
I mixed up an entire XT1052(5.1 retail EN) with fsg.mbn from XT1053(5.1 OTA) and flashed them manually. Now my XT1056 works very well (with Xposed framework).
Keep in mind that YOU DO THIS ON YOUR OWN RISK.

ong14 said:
You can downgrade completely to 4.4.4.
But don't take OTA, your phone will brick.
The safest way in my opinion is (if you want to downgrade);
- Flash entire official firmware of XT1060 to your phone.
- DON'T TAKE OTA
- Wait for full firmware of XT1060(5.1)
- Flash full firmware of XT1060(5.1)
But if you want to play with 5.1, you can try this;
In my case, I have XT1056, and I wanted to play around with 5.1, so I converted from XT1056(4.4.4) to XT1053(4.4.4), then took OTA to XT1053 (5.1).
After that I tried AOSP but my bluetooth headset had a problem with phone function, then I decided to go back to official firmware again.
Since there is no Lollipop image for XT1053 or XT1056 now, I had to flash another variants like XT1052 and XT1058, but I got no signal.
I had to downgrade to XT1056(4.4.4) and using it for a day. After that I found out that file size of fsg.mbn differ by variants, then I downloaded XT1053(5.1 OTA) to get it.
I mixed up an entire XT1052(5.1 retail EN) with fsg.mbn from XT1053(5.1 OTA) and flashed them manually. Now my XT1056 works very well (with Xposed framework).
Keep in mind that YOU DO THIS ON YOUR OWN RISK.
Click to expand...
Click to collapse
My situation is same with you. My phone is xt1056 sprint. I converted to xt1053, and got ota to 5.1. But I don't like stock 5.1,there are some bug with graphic... I flashed and used customs Rom CM, PA,Carbon...some day. But now, I want to come back 4.4.4. Can you guide me more details?
I think if you flash complete 4.4.4 from 5.1, phone will bricked, because bootloader can not downgrade as someone said in high risk ...topic. Maybe you can flash 4.4.4 fw with edit xml to NOT flash motoboot and gpt....
Right ?
And last question, if there is a method to flash back 4.4.4, can I flash 4.4.4 xt1053 ? I don't want my phone have many bloatware sprint xt1056.

md07 said:
My situation is same with you. My phone is xt1056 sprint. I converted to xt1053, and got ota to 5.1. But I don't like stock 5.1,there are some bug with graphic... I flashed and used customs Rom CM, PA,Carbon...some day. But now, I want to come back 4.4.4. Can you guide me more details?
I think if you flash complete 4.4.4 from 5.1, phone will bricked, because bootloader can not downgrade as someone said in high risk ...topic. Maybe you can flash 4.4.4 fw with edit xml to NOT flash motoboot and gpt....
Right ?
And last question, if there is a method to flash back 4.4.4, can I flash 4.4.4 xt1053 ? I don't want my phone have many bloatware sprint xt1056.
Click to expand...
Click to collapse
You can flash back to 4.4.4 of XT1053 or XT1056 as you prefer, I think their radio are compatible.
But when 5.1 comes out, DON'T TAKE OTA. You have to wait for a full firmware to upgrade your phone.
I always use a manual flash method, so I don't have to edit an xml file.
When you downgrades, you will see a warning message, just ignore them.

ong14 said:
You can flash back to 4.4.4 of XT1053 or XT1056 as you prefer, I think their radio are compatible.
But when 5.1 comes out, DON'T TAKE OTA. You have to wait for a full firmware to upgrade your phone.
I always use a manual flash method, so I don't have to edit an xml file.
When you downgrades, you will see a warning message, just ignore them.
Click to expand...
Click to collapse
Do you use fastening to flash fw? And you flash all part inside fw? Include motorboat and got... ? After flash, do you make unlock network again ?

I used mfastboot to flash all CGs to my phone. But you may try to skip some CGs like KidJoe said.
Every time when you return to stock or do a hard reset, you have to do the SIM-unlock process again.

harel013 said:
Hey, i got the verizon dev edition with unlocked boktloader and root device i flash xt1052 rom to get the ota to 5.1
And aftet i flashed the baseband of 4.4.4 xt1060 to get my network work.
But now i want to get back to 4.4.4 of the verizon dev edition and i download tgz fille from the motorola site
And i wanted to flash it on rsd lite but i didnt have the xml fille there? So i dont know what to do now?
Ty for help
Click to expand...
Click to collapse
Moto is no longer including the XML to flash via RSDLite, but you could make your own if needed... instead they include a BATCH file which calls a copy of Moto's fastboot to flash it.
That being said... I WARN YOU!!! You will risk bricking your phone if you attempt to downgrade. While there is a slight chance the phone will not brick, we have enough who have bricked to say it is not safe!!
Some will say... "its ok, just skip motoboot.img and gpt.bin when flashing" that isn't safe either. If you later get prompted for and take an OTA update you'll again likely brick. Further when motoboot.img and GPT.BIN are missmatched from the rest of a STOCK Moto rom we've seen "bugs" or "issues" of things no working, like speaker phone, Settings -> Security menu, etc which are not a problem when all parts of your phone are consistent.
You're best bet... wait until a full 5.1 SBF for the Verizon XT1060 is either posted to Moto's web site of Dev Edition Images, or wait until a copy leaks... however, that too many also fail *IF* the GPT.BIN and components of motoboot.img are newer or different in the build you are running compared to what is made available as the XT1060 5.1 SBF.

KidJoe said:
Moto is no longer including the XML to flash via RSDLite, but you could make your own if needed... instead they include a BATCH file which calls a copy of Moto's fastboot to flash it.
That being said... I WARN YOU!!! You will risk bricking your phone if you attempt to downgrade. While there is a slight chance the phone will not brick, we have enough who have bricked to say it is not safe!!
Some will say... "its ok, just skip motoboot.img and gpt.bin when flashing" that isn't safe either. If you later get prompted for and take an OTA update you'll again likely brick. Further when motoboot.img and GPT.BIN are missmatched from the rest of a STOCK Moto rom we've seen "bugs" or "issues" of things no working, like speaker phone, Settings -> Security menu, etc which are not a problem when all parts of your phone are consistent.
You're best bet... wait until a full 5.1 SBF for the Verizon XT1060 is either posted to Moto's web site of Dev Edition Images, or wait until a copy leaks... however, that too many also fail *IF* the GPT.BIN and components of motoboot.img are newer or different in the build you are running compared to what is made available as the XT1060 5.1 SBF.
Click to expand...
Click to collapse
Yea i think i will wait for the full sbf 5.1 for verizon, i dont want to take the chance.
Thank you all for your help when the 5.1 update will come to the verizon you think?