Database Develop

XPOSED not working Firmware .257

Just wondering if you guys experience the same issue?
None of the modules work for me.
app_process line is black and highlighted red instead of green with numbers.

Works fine for me. Are you sure you are rooted
Sent from my C6903 using XDA Premium 4 mobile app

Works perfectly for me as well.

Gravity Box working good.
but transparent not working.(statusbar and navibar)

Works great here thanks gregbradley for the tip
Sent from my C6903 using Tapatalk 2

crimsonm said:
Gravity Box working good.
but transparent not working.(statusbar and navibar)
Click to expand...
Click to collapse
Same here, transparency not working

3r1k said:
Just wondering if you guys experience the same issue?
None of the modules work for me.
app_process line is black and highlighted red instead of green with numbers.
Click to expand...
Click to collapse
Uninstall any mods you have installed and then re-install xposed.
Download one mod which you know works, like gravity box.
Then activate it by checking the box within modules.
Then go to framework and click install/update.
Then click reboot and allow it to restart the phone.
Once rebooted, click on gravity box and it should allow you in, if it does then youre golden.
If this doesn't work then you may want to check if you've rooted your phone correctly and you granted superuser access to Xposed in the first place, if that is the problem then force stop xposed and go to super user (the app) and remove xposed from the list, then re open xposed and grant it access for all time.
Should do the trick.
Once it's working, you're free to redownload all the mods you like.
Also sounds like you may have reinstalled Xposed from titanium, remove xposed using titanium and wipe data for the xposed app also in titanium, then reinstall xposed from scratch, also remove any mods that you may have before doing this too.

Yogaxl said:
Same here, transparency not working
Click to expand...
Click to collapse
Transparencie doesn't work (on stock launcher, try Nova) but other things are working great.
I always hated Xposed but I must admit - it's great on Z1.
CRT animation screen off, advanced power menu, disable stupid mobile data warning.
Awesome apk
You could take systemUI from ROM that have transparent status and nav bar and simple use that systemUI.apk.
Just say tnx to developer.
Sent from my Z1

It didn't work for me until I installed SuperSu over the default SU app.
Sent from my C6903 using xda app-developers app

3r1k said:
Just wondering if you guys experience the same issue?
None of the modules work for me.
app_process line is black and highlighted red instead of green with numbers.
Click to expand...
Click to collapse
Yep working fine for me

-App Settings
-GravityBox
-Hide Stamina mode icon
-Xblast Tools
-XuiMod
All working fine

benziii said:
-App Settings
-GravityBox
-Hide Stamina mode icon
-Xblast Tools
-XuiMod
All working fine
Click to expand...
Click to collapse
I can also confirm tweakbox

Yogaxl said:
Same here, transparency not working
Click to expand...
Click to collapse
Just installed it, latest version of Gravitybox.
I'm on MonxDified rom, it doesn't work...
Any other suggestions?

Xposed on stock kitkat

Hi guys,
When we got 4.3 there was a problem with xposed framework and now the same is on 4.4. Is there any solution to get xposed working?

orzech.miron said:
Hi guys,
When we got 4.3 there was a problem with xposed framework and now the same is on 4.4. Is there any solution to get xposed working?
Click to expand...
Click to collapse
Yes, goto the xposed thread and download the 2.5 beta framework. It works fine.

gregbradley said:
Yes, goto the xposed thread and download the 2.5 beta framework. It works fine.
Click to expand...
Click to collapse
Yes, it does. Only Gravity Box doesn't play nice with Sony KitKat. To be able to resize the Navigation Bar I used X-Blast and it really works. Also Advanced Power menu module does work fine and GEM Xperia Xposed does work to mod the Launcher and enable wake by Volume Rocker. It does not change the Lockscreen to AOSP anymore. I hope Gravity Box will be fixed soon.

gregbradley said:
Yes, goto the xposed thread and download the 2.5 beta framework. It works fine.
Click to expand...
Click to collapse
Well when I install 2.5beta and start installation, I get "Could not extract app_process". And it doesnt install by any of the three methods.

taranfx said:
Well when I install 2.5beta and start installation, I get "Could not extract app_process". And it doesnt install by any of the three methods.
Click to expand...
Click to collapse
Do you have root? In installed 2.5 beta3. That works fine.

Planet X said:
Do you have root? In installed 2.5 beta3. That works fine.
Click to expand...
Click to collapse
of course.

Work's fine for me too!!

[Q] Locked Bootloader AOSP-ish Experience on C6606?

I'm coming from an S3 where I had Paranoid Android installed. I really miss the stock Android feel. Is there any ROM available for the US LTE T-Mobile variant with a locked bootloader that is similar to stock or are there Xposed modules that can get it there?
I tried the Xposed module that is supposed to turn your Xperia QuickSettings into an AOSP style, but it just caused the systemUI to crash. I can't remember the name.
Thus far I've installed Nova Launcher and used an Xposed module to display "L"-style navigation buttons. If I could change the systemUI, I'd be satisfied.
Thanks for the help.

thatguy222 said:
I'm coming from an S3 where I had Paranoid Android installed. I really miss the stock Android feel. Is there any ROM available for the US LTE T-Mobile variant with a locked bootloader that is similar to stock or are there Xposed modules that can get it there?
I tried the Xposed module that is supposed to turn your Xperia QuickSettings into an AOSP style, but it just caused the systemUI to crash. I can't remember the name.
Thus far I've installed Nova Launcher and used an Xposed module to display "L"-style navigation buttons. If I could change the systemUI, I'd be satisfied.
Thanks for the help.
Click to expand...
Click to collapse
you can use this to root the rom and then using xposed module without any issues

androidtweaker1 said:
you can use this to root the rom and then using xposed module without any issues
Click to expand...
Click to collapse
Thanks AndroidTweaker. I've actually already gotten that far. Any other recommendations to get a more AOSP experience?

thatguy222 said:
I'm coming from an S3 where I had Paranoid Android installed. I really miss the stock Android feel. Is there any ROM available for the US LTE T-Mobile variant with a locked bootloader that is similar to stock or are there Xposed modules that can get it there?
I tried the Xposed module that is supposed to turn your Xperia QuickSettings into an AOSP style, but it just caused the systemUI to crash. I can't remember the name.
Thus far I've installed Nova Launcher and used an Xposed module to display "L"-style navigation buttons. If I could change the systemUI, I'd be satisfied.
Thanks for the help.
Click to expand...
Click to collapse
that xposed aosp quick settings won't work with KitKat.

Xposed - Someone installed it?

Just received my brand new Z3,but already feeling the itch for some customization.
Someone already tried playing around with xposed?
It is fully working or at least some features?
Thanks

After rooting/bootloader unlocking the phone, I installed Xposed. It works well. I use the following:
App Settings - I made systemUI (and most of my non-sony apps) 240 dpi.
GravityBox (smaller nav bar, orange icons, replacement battery, AM/PM removal, 3 dot on nav bar right, search on nav bar left.
Tinted Status bar
Xperia Xposed - installed but I decided not to use anything
Please note, per conversations on general, unlocking the bootloader will irreversibly worsen the camera's low-light picture quality and kill native miracasting/chromecasting ability linked to Sony's DRM keys

I'm using tons of Xposed modules and I couldn't live without it. It's one of the greatest pieces of software ever written and I'll stay away from Android L until Xposed works on it. i never felt the urge to use CM or another rom since I'm using Xposed, GravityBox alone is such a mighty module that it replaces a plethora of third party rom features.

It's really hard to live without Xposed after having it for so long on my Moto X. I'm just not willing to lose the camera quality by unlocking the BL. Of course, there are other things I'm itching to do as well with root (like freezing and deleting lots of useless apps that suck battery!)

I am using xposed with
- xstana module
- tinted status bar
- gravity box
Everything works perfectly!

mickliq said:
It's really hard to live without Xposed after having it for so long on my Moto X. I'm just not willing to lose the camera quality by unlocking the BL. Of course, there are other things I'm itching to do as well with root (like freezing and deleting lots of useless apps that suck battery!)
Click to expand...
Click to collapse
I don't mind losing some of the camera quality either, I believe that people will either find a way to reverse the process, or make something better.
I'm just waiting till I can backup my TA partition.
Sent from my D5803

I istalled Xposed and run xled, xquiet hours and cyan lock screen the lose of the cameras low light abilty is not a big problem i use camera fv5 and change the iso settings

So no way in hell to get root without unlocking the bootloader?

i was using pie controls from gravitybox with navbar disabled, but i found out that pie doesn't appear when using camera with physical button with phone in standby.... anyone can confirm this?

I use XBlast and Xposed LED Control.
Both works fine. What does NOT work is GravityBox. But why? Can someone help me?
When trying to start it, it says "GravityBox System Framework does not answer" in german. in english perhaps its something like "cant retrieve System Framework data" or something like that.
It doesn matter how often i try, always the same error message

tranceonline said:
I use XBlast and Xposed LED Control.
Both works fine. What does NOT work is GravityBox. But why? Can someone help me?
When trying to start it, it says "GravityBox System Framework does not answer" in german. in english perhaps its something like "cant retrieve System Framework data" or something like that.
It doesn matter how often i try, always the same error message
Click to expand...
Click to collapse
You need to enable it in Module and restart phone. After that you can do what you want! In Download section, you can find more module with search filter by typing: xperia

Zanr Zij said:
You need to enable it in Module and restart phone. After that you can do what you want! In Download section, you can find more module with search filter by typing: xperia
Click to expand...
Click to collapse
Thx but did you read what i wrote? do i look as i use xposed the first time??
I am using xlast and xposed led, as i mentioned before.

tranceonline said:
Thx but did you read what i wrote? do i look as i use xposed the first time??
I am using xlast and xposed led, as i mentioned before.
Click to expand...
Click to collapse
I think gravity Box can not handle sonys ui. Had it before on lg g2 stock rom. Just some features worked. Keep in mind that gb is actually for vanilla kitkat(aosp,maybe cm)

GB worked fine for me on the Z1C, but eventually some features require a deodexed rom. I've always been using RomAur.

tranceonline said:
Thx but did you read what i wrote? do i look as i use xposed the first time??
I am using xlast and xposed led, as i mentioned before.
Click to expand...
Click to collapse
I did not mean you have to enable xposed installer. I said: you have to enable GravityKK module by tick the box, do nothing more, restart the phone first. After that you can config without any framework message error!

xposed works great
I using xposed for remote play (ps4)
and its workign great!

kekec777 said:
I using xposed for remote play (ps4)
and its workign great!
Click to expand...
Click to collapse
How does this work?
With bootloader unlocked? (I think so )
THX

gabsi55 said:
How does this work?
With bootloader unlocked? (I think so )
THX
Click to expand...
Click to collapse
I actually just installed CM11 for my Samsung Tab 2 p5110 so i have a custom stock rom..

kekec777 said:
I actually just installed CM11 for my Samsung Tab 2 p5110 so i have a custom stock rom..
Click to expand...
Click to collapse
Ah ok...
Thought you are using unlocked Z3C ..

Zanr Zij said:
I did not mean you have to enable xposed installer. I said: you have to enable GravityKK module by tick the box, do nothing more, restart the phone first. After that you can config without any framework message error!
Click to expand...
Click to collapse
Yes and as i said, i used Xposed before. what i want to say with that is : I know how Xposed works and how to use it. I know that you have to "activate" modules with the checkbox.
still, GB won't work.

Best Xposed Moduls for Z5

Hello Guys,
i want to know wich xposed moduls do you use on stock z5.
At the moment i use Android N-ify and Gravity Box MM.
Please Post it like:
Module:
Android Version
Maybe Screenshot
Thanks

I use a lot of modules

i use these modules

Hi guys. I am currently on 6.0.1, stock rom with stock kernel and flashed tobias drm fix.
Got root and TWRP and flashed xposed framework.
But it says SDK23 Is not supported.
Hw to get it work on 6.0.1
Which version of android u guyz using?
Thank u.

agentsandy007 said:
Hi guys. I am currently on 6.0.1, stock rom with stock kernel and flashed tobias drm fix.
Got root and TWRP and flashed xposed framework.
But it says SDK23 Is not supported.
Hw to get it work on 6.0.1
Which version of android u guyz using?
Thank u.
Click to expand...
Click to collapse
Xposed beta v85 supports android m but crashes sometimes
Sent from my Xperia Z5 using XDA Labs

egemaster said:
Xposed beta v85 supports android m but crashes sometimes
Click to expand...
Click to collapse
I did try v85 but no luck.

I'm using 85.7 systemless for about 2 weeks, no problems so far

Отправлено с моего E5823 через Tapatalk
P.S. Comrades, is there any analog of Ambient display? I`m on Xpower 3.0(deodexed ROM for Z5C). I have tried module - Enable Ambient Display - Xposed, but no luck so far. Any solutions?

xposed v86 is out now

Phazonclash said:
View attachment 3811782
View attachment 3811783
Click to expand...
Click to collapse
I see that u are using Android N ify.
Is that working for you?
I've tried it on stock rom 224, it doesnt work.
And what Rom are u using?

since .253 update Xposed is causing random reboots for me , even with systemless xposed v86.1

List of modules I use:
APM+
Enable Ambient Display Xposed
GravityBox
MinMinGuard
Youtube Background Playback
Fingerprint Enabler
Firmware .253 with Xposed v86

I am using
Gravity Box
Hide Emergency Buttton
XQS Background (working wonderfully)
Settings Editor is also great but only if you buy it.

kadimatik said:
I use a lot of modules
Click to expand...
Click to collapse
great
thanks

rtimoff said:
Отправлено с моего E5823 через Tapatalk
P.S. Comrades, is there any analog of Ambient display? I`m on Xpower 3.0(deodexed ROM for Z5C). I have tried module - Enable Ambient Display - Xposed, but no luck so far. Any solutions?
Click to expand...
Click to collapse
@rtimoff Ambient Display needs AMOLED displays, no ?
Since the Z5 series uses LCD displays it will NOT work
edit:
well, it could be emulated with Tasker or Secure Settings:
http://www.androidauthority.com/battery-life-ambient-display-notifications-689638/
and Gravity Screen

I use Xposed v86 and no issues on my Z5.
This are my modules.
Some i dont use at the moment so disabled it.

Pandemic said:
I use Xposed v86 and no issues on my Z5.
This are my modules.
Some i dont use at the moment so disabled it.
Click to expand...
Click to collapse
Can't find the modules of Xperia home and blurred system ui mm
Sent from my E6633 using XDA-Developers mobile app

Ahyricks said:
Can't find the modules of Xperia home and blurred system ui mm
Sent from my E6633 using XDA-Developers mobile app
Click to expand...
Click to collapse
Check the profile of my bro @serajr
Do something by yourself like searching