Hoping somebody can help me figure out what is going on with my phone. Sorry for the long post, but hoping folks with custom rom and flashing experience will read on to help.
I have the Verizon Developer Edition. I have unlocked the bootloader, installed TWRP 2.7, and rooted the phone. I have never installed any custom ROMs on the phone. I had done custom ROMs on my GS3, but I just wanted this phone rooted, and maybe mess around with a few ROMs down the road.
I followed this video from RootJunky when I originally installed TWRP.
So a few weeks ago I kept getting the OTA message to upgrade to the latest kitkat. I decided to flash back to the original recovery so I could do the upgrade. I contacted RootJunky on his youtube channel and he provided a link to the stock recovery and I flashed it using the same video and his linked file.
After flashing the stock recovery, when I was in bootloader mode, I scrolled down to "recovery" and selected it. It would not go into recovery. It just stays in a bootloop. I went back and forth with RootJunky a few times trying to resolve this, but I got no response to my last few comments.
I can get the phone back into bootloader mode by holding the volume up/dwn and power buttons, if I time it correctly during the bootloop. When in bootloader mode, I can select "Normal Powerup" option and the phone will boot up and function properly. But, if I shut the phone down, I can't turn the device on with the power button, otherwise it will just bootloop. I have to get into bootloader mode, then select "Normal Powerup" to get the phone to work.
Once back in the phone, my USB debugging option is unchecked. I can recheck it, open a command prompt, and do a "adb devices" and it shows it connected. But if I do a "adb reboot bootloader" from the command prompt it will bootloop.
When I get into bootloader mode manually, when I connect it to the computer, and do a "adb devices", it doesn't show as connected, as I think the USB debugging option is getting toggled off somehow, so I can't connect or flash anything to the phone at this point.
One thing I see, in the video @ 4:50, he says you need to be at "status code 1" to flash recoveries. I am/was at status code 3. Not sure if that is why I am having this issue, or how to get this changed.
Any help would be greatly appreciated. I can use the phone just fine, but at this point, I would just like to be able to do a full restore to stock, upgrade to 4.4.4, keep the unlocked bootloader, and root the phone. No custom ROM.
THANKS!
08G8V8 said:
Hoping somebody can help me figure out what is going on with my phone. Sorry for the long post, but hoping folks with custom rom and flashing experience will read on to help.
I have the Verizon Developer Edition. I have unlocked the bootloader, installed TWRP 2.7, and rooted the phone. I have never installed any custom ROMs on the phone. I had done custom ROMs on my GS3, but I just wanted this phone rooted, and maybe mess around with a few ROMs down the road.
I followed this video from RootJunky when I originally installed TWRP.
So a few weeks ago I kept getting the OTA message to upgrade to the latest kitkat. I decided to flash back to the original recovery so I could do the upgrade. I contacted RootJunky on his youtube channel and he provided a link to the stock recovery and I flashed it using the same video and his linked file.
After flashing the stock recovery, when I was in bootloader mode, I scrolled down to "recovery" and selected it. It would not go into recovery. It just stays in a bootloop. I went back and forth with RootJunky a few times trying to resolve this, but I got no response to my last few comments.
I can get the phone back into bootloader mode by holding the volume up/dwn and power buttons, if I time it correctly during the bootloop. When in bootloader mode, I can select "Normal Powerup" option and the phone will boot up and function properly. But, if I shut the phone down, I can't turn the device on with the power button, otherwise it will just bootloop. I have to get into bootloader mode, then select "Normal Powerup" to get the phone to work.
Once back in the phone, my USB debugging option is unchecked. I can recheck it, open a command prompt, and do a "adb devices" and it shows it connected. But if I do a "adb reboot bootloader" from the command prompt it will bootloop.
When I get into bootloader mode manually, when I connect it to the computer, and do a "adb devices", it doesn't show as connected, as I think the USB debugging option is getting toggled off somehow, so I can't connect or flash anything to the phone at this point.
One thing I see, in the video @ 4:50, he says you need to be at "status code 1" to flash recoveries. I am/was at status code 3. Not sure if that is why I am having this issue, or how to get this changed.
Any help would be greatly appreciated. I can use the phone just fine, but at this point, I would just like to be able to do a full restore to stock, upgrade to 4.4.4, keep the unlocked bootloader, and root the phone. No custom ROM.
THANKS!
Click to expand...
Click to collapse
First, Status code 3 is normal - that indicates an unlocked bootloader.
You should be able to use the 4.4.4 FXZ to flash back to 100% stock. Afterwards, you can flash TWRP, and re-root. Use the latest TWRP from here: http://techerrata.com/browse/twrp2/ghost
The important thing about TWRP is that immediately after flashing it, you have to "fastboot reboot-bootloader" and immediately boot into recovery - otherwise it doesn't 'stick'. We don't know why, but as long as you do it that way, you will be fine.
Here is the link for the 4.4.4 FXZ: http://forum.xda-developers.com/moto-x/general/fxz-moto-x-4-4-4-212-55-26-t2827307
If you follow the instructions, you will be on stock, rooted 4.4.4 in less than 20 minutes.
Good Luck, and let me know if you need additional assistance :good:
Also, please remember to post your questions to Q&A - not General. Don't worry as I have already requested that the Mods move it to the appropriate sub-forum.
EDIT: The problem I see with "rootjunky"s video is that first, he advises that "Status code 1" is required to flash recovery -- this is incorrect. Status code 3 works fine for custom recovery.
Additionally, he did not "fastboot reboot-bootloader" before booting into recovery. This is necessary. I'm not sure why he left that step out....likely he already had custom recovery flashed when he made the video.
Thanks for the quick response. Sorry about posting in the wrong section. I should have known better.....
I will look at this, but probably won't do it until after work tomorrow. I will post back tomorrow, hopefully with success.
Thanks!
I saw your edit to your post. I did the reboot boot loader step when I originally flashed twrp. I can't remember where I saw it, but I remember reading it and doing it.
The phone was running fine with twrp installed for a few months. The problem I am having now happened after flashing the stock recovery back onto the phone.
Do you recommend the RSD Flasher or House of Moto method to flash this FXZ?
08G8V8 said:
I saw your edit to your post. I did the reboot boot loader step when I originally flashed twrp. I can't remember where I saw it, but I remember reading it and doing it.
The phone was running fine with twrp installed for a few months. The problem I am having now happened after flashing the stock recovery back onto the phone.
Do you recommend the RSD Flasher or House of Moto method to flash this FXZ?
Click to expand...
Click to collapse
Either will work fine. If you don't care about keeping your data, you can use RSD Lite (will wipe everything). If you use one of the tools in the thread I linked you to, make absolutely sure you follow the instructions -- you can't have any spaces in any folder-names. If you use RSD Lite, you just select the zip file and flash (no worries about directory structure).
Ok, I just assumed those were the methods to flash it. I will look into the RSD Lite method, as if don't mind wiping the data.
I just watched a quick video on YouTube about using RSD Lite, and they state you must reboot the boot loader and do the flash in fastboot. I can't reboot into the bootloader from the command prompt, as it goes into the boot loop. I can get into fastboot manually, but when connecting to the computer it doesn't recognize it since the USB debugging option keeps getting reset on me.
Am I missing something? I don't see how I can flash this.
08G8V8 said:
I just watched a quick video on YouTube about using RSD Lite, and they state you must reboot the boot loader and do the flash in fastboot. I can't reboot into the bootloader from the command prompt, as it goes into the boot loop. I can get into fastboot manually, but when connecting to the computer it doesn't recognize it since the USB debugging option keeps getting reset on me.
Am I missing something? I don't see how I can flash this.
Click to expand...
Click to collapse
So you are telling me that when you type "adb reboot bootloader" (if usb debugging is enabled) or "fastboot reboot-bootloader" (if usb debugging is not enabled) it doesn't take you to the "AP Fastboot Mode" screen?
samwathegreat said:
So you are telling me that when you type "adb reboot bootloader" (if usb debugging is enabled) or "fastboot reboot-bootloader" (if usb debugging is not enabled) it doesn't take you to the "AP Fastboot Mode" screen?
Click to expand...
Click to collapse
Sorry, the "adb reboot bootloader" sends me into the bootloop.
I hadn't tried the "fastboot reboot bootloader" or "fastboot reboot-bootloader". Now when I try that, with USB debugging checked I just get "<waiting for device>" It does nothing.
What about turning off the device. Then holding power button and volume down at the same time. Does it take you to the bootloader screen like it should?
It sounds to me like when you were attempting you flash your stock recovery back, you flashed it to the wrong partition. I've seen another member do this....
He accidentally typed "fastboot flash bootloader stockrecoveryfile.img"
That would cause the issues you are describing... I might have a way to fix it if you are currently still rooted and able to access adb...
Travisdroidx2 said:
What about turning off the device. Then holding power button and volume down at the same time. Does it take you to the bootloader screen like it should?
Click to expand...
Click to collapse
Yes, I can manually get into bootloader, but it keeps toggling my USB debugging option, so when I connect it to the computer, it doesn't see it.
08G8V8 said:
Yes, I can manually get into bootloader, but it keeps toggling my USB debugging option, so when I connect it to the computer, it doesn't see it.
Click to expand...
Click to collapse
USB debugging isn't used in the bootloader, and adb isn't used for fastboot mode... I'm very confused by what you are saying...
Once you are in the boot loader screen does "fastboot devices" recognize your device?
samwathegreat said:
It sounds to me like when you were attempting you flash your stock recovery back, you flashed it to the wrong partition. I've seen another member do this....
He accidentally typed "fastboot flash bootloader stockrecoveryfile.img"
That would cause the issues you are describing... I might have a way to fix it if you are currently still rooted and able to access adb...
Click to expand...
Click to collapse
No, I typed "fastboot flash recovery stockrecoveryfile.img"
I did just like originally when flashing TWRP, just replaced the file in the command line.
I am still rooted.
samwathegreat said:
USB debugging isn't used in the bootloader, and adb isn't used for fastboot mode... I'm very confused by what you are saying...
Click to expand...
Click to collapse
I can get into fastboot with the phone powered off, holding the volume UP/DWN and PWR. But when connected to the computer it isn't recognized.
Sorry, but I am confused as well. I am just going off what I have seen in RootJunky's videos. In this video, https://www.youtube.com/watch?v=1LkuLb8hV6Q#t=285 at 4:44, after he does the "adb reboot bootloader" he says the device is now in "bootloader mode" which is what I am talking about, but I guess is actually Fastboot Mode. This is the same mode I am talking about getting into from the device powered off holding the volume UP/DWN and PWR buttons, but going in this way doesn't get recognized by the computer.
Travisdroidx2 said:
Once you are in the boot loader screen does "fastboot devices" recognize your device?
Click to expand...
Click to collapse
YES it does! Thanks. I kept trying "adb devices", and when it wasn't recognizing it, I figured it wasn't connected. I wasn't doing "fastboot devices". But, my USB debugging still was getting unchecked after getting back into the phone.
So with it recognizing my device in fastboot mode I should be able to go ahead with the RSD Lite flashing?
08G8V8 said:
No, I typed "fastboot flash recovery stockrecoveryfile.img"
I did just like originally when flashing TWRP, just replaced the file in the command line.
I am still rooted.
I can get into fastboot with the phone powered off, holding the volume UP/DWN and PWR. But when connected to the computer it isn't recognized.
Sorry, but I am confused as well. I am just going off what I have seen in RootJunky's videos. In this video, https://www.youtube.com/watch?v=1LkuLb8hV6Q#t=285 at 4:44, after he does the "adb reboot bootloader" he says the device is now in "bootloader mode" which is what I am talking about, but I guess is actually Fastboot Mode. This is the same mode I am talking about getting into from the device powered off holding the volume UP/DWN and PWR buttons, but going in this way doesn't get recognized by the computer.
Click to expand...
Click to collapse
OK, glad you didn't flash to bootloader. That is tricky to fix...but I've dealt with people who have done it before.
Try another PC...or re-install the drivers. Also, DO NOT use a usb 3.0 port, always use 2.0.
Bootloader = AP fastboot mode. They are one and the same. Try to get it recognized with "fastboot devices", on any PC. If you can get to that point, you can flash back to stock and recover everything. The FXZ can actually FIX a corrupted or damaged filesystem. It replaces all the relevant partitions.
Remember you do NOT use adb or usb debugging. They have nothing to do with fastboot.
---------- Post added at 09:10 PM ---------- Previous post was at 09:09 PM ----------
08G8V8 said:
YES it does! Thanks. I kept trying "adb devices", and when it wasn't recognizing it, I figured it wasn't connected. I wasn't doing "fastboot devices". But, my USB debugging still was getting unchecked after getting back into the phone.
So with it recognizing my device in fastboot mode I should be able to go ahead with the RSD Lite flashing?
Click to expand...
Click to collapse
YES!!!!
It seems you were confusing adb and fastboot. As long as "fastboot devices" recognizes your device, SO WILL RSD LITE!!!
Now follow my initial instrucitons, and you will be up and running in no time...
Thanks guys! I am going to do this tomorrow, but I feel pretty good that it is going to work.
Yes, I got VERY confused, and definitely need to go study up some more. I thought I had it, but obviously not.
Will report back tomorrow.
Happy to help
Absolutely get the Dev Edition for the same price. While Safestrap is out for other Galaxy devices with locked bootloaders (not sure if the S5 got SS yet) it allows customs Roms....but not kernel changes. With a Dev edition, there may be less development, but I'm sure there will still be some development out there.
Related
RESOLVED!
so I just got my moto x dev edition, unlocked the bootloader, and then screwed it up...
i tried flashing the recovery as described here, http://forum.xda-developers.com/showthread.php?t=2458451 but didn't realize/understand that fastboot and mfastboot were not interchangeable. it looked like it went ok, but I wasn't able to reboot into recovery. so, now on boot to recovery i get the little android on his back with a red triangle. i'm pretty sure that the stock recovery is gone, but cwm is not installed either. which brings me to my next little problem...
so i did some reading and got mfastboot installed and thought ok I just need to reflash cwm on phone again. problem is, now the phone won't stay in usb debug mode so that i can see it when fastbooted. that is, when i reboot the phone into fastboot by holding the power/vol down I can't see the phone when doing 'adb devices', and whem I let it boot up i see usb debug is switched off. when i switch it on, then i can see the phone from adb again, but when i try to 'reboot bootloader' it gives me a not allowed error.
at this point i'm just sick and afraid i bricked it. i am coming from a galaxy nexus and never had anything like this happen before. i truly appreciate any help here, at this point i feel like puking and dreading telling the wife i just blew 450.... :-/
ps i'm on mac 10.7 so if i need rsd it will be via a virtual machine....
herrdrchili said:
so I just got my moto x dev edition, unlocked the bootloader, and then screwed it up...
i tried flashing the recovery as described here, http://forum.xda-developers.com/showthread.php?t=2458451 but didn't realize/understand that fastboot and mfastboot were not interchangeable. it looked like it went ok, but I wasn't able to reboot into recovery. so, now on boot to recovery i get the little android on his back with a red triangle. i'm pretty sure that the stock recovery is gone, but cwm is not installed either. which brings me to my next little problem...
so i did some reading and got mfastboot installed and thought ok I just need to reflash cwm on phone again. problem is, now the phone won't stay in usb debug mode so that i can see it when fastbooted. that is, when i reboot the phone into fastboot by holding the power/vol down I can't see the phone when doing 'adb devices', and whem I let it boot up i see usb debug is switched off. when i switch it on, then i can see the phone from adb again, but when i try to 'reboot bootloader' it gives me a not allowed error.
at this point i'm just sick and afraid i bricked it. i am coming from a galaxy nexus and never had anything like this happen before. i truly appreciate any help here, at this point i feel like puking and dreading telling the wife i just blew 450.... :-/
ps i'm on mac 10.7 so if i need rsd it will be via a virtual machine....
Click to expand...
Click to collapse
so, if i understand you correctly, u've held down the volume down button and power button? becasue that's your fastboot. That's where you need to be to use RSD, and that's what i'd do.
ADB commands aren't used in fastboot mode. You should be able to see the device in fastboot mode with the command fastboot devices. Also, remember that the stock rom will try to restore the stock recovery when it is booted so if you flash recovery in fastboot mode then let the stock rom boot it will reflash the stock recovery which shows you the little droid and the red triangle.
You should still be okay though. Shut the phone off and boot into fastboot manually with power and volume down. Reflash the recovery. I know there are warnings about using mfastboot but I used standard fastboot before I saw those and didn't have an issue. From the fastboot screen after flashing the recovery, use volume down to get to highlight recovery and then press volume up to select, not power. Power will just do a standard reboot.
If you flashed twrp recovery then rebooting system will prompt you to install su. I think clockwork does the same thing. Letting the recovery install su will also prevent the stock recovery from getting restored and from there you should be good.
herrdrchili said:
so I just got my moto x dev edition, unlocked the bootloader, and then screwed it up...
i tried flashing the recovery as described here, http://forum.xda-developers.com/showthread.php?t=2458451 but didn't realize/understand that fastboot and mfastboot were not interchangeable. it looked like it went ok, but I wasn't able to reboot into recovery. so, now on boot to recovery i get the little android on his back with a red triangle. i'm pretty sure that the stock recovery is gone, but cwm is not installed either. which brings me to my next little problem...
so i did some reading and got mfastboot installed and thought ok I just need to reflash cwm on phone again. problem is, now the phone won't stay in usb debug mode so that i can see it when fastbooted. that is, when i reboot the phone into fastboot by holding the power/vol down I can't see the phone when doing 'adb devices', and whem I let it boot up i see usb debug is switched off. when i switch it on, then i can see the phone from adb again, but when i try to 'reboot bootloader' it gives me a not allowed error.
at this point i'm just sick and afraid i bricked it. i am coming from a galaxy nexus and never had anything like this happen before. i truly appreciate any help here, at this point i feel like puking and dreading telling the wife i just blew 450.... :-/
ps i'm on mac 10.7 so if i need rsd it will be via a virtual machine....
Click to expand...
Click to collapse
ok then - i guess rsd has potential?
xpsychox said:
so, if i understand you correctly, u've held down the volume down button and power button? becasue that's your fastboot. That's where you need to be to use RSD, and that's what i'd do.
Click to expand...
Click to collapse
i can reboot into fastboot, but adb can't see the phone. I'll start trying to setup rsd and and see if it can do any better. any good links you know to get up to speed on that would be appreciated. if you know how to simply reflash the recovery via rsd that would be helpful too - thanks in advance!
herrdrchili said:
i can reboot into fastboot, but adb can't see the phone. I'll start trying to setup rsd and and see if it can do any better. any good links you know to get up to speed on that would be appreciated. if you know how to simply reflash the recovery via rsd that would be helpful too - thanks in advance!
Click to expand...
Click to collapse
the sites that I know of are for the device I have, a non devliper edition... I don't know if it makes a difference, I don't wanna make anything worse.
thanks for the sanity check,,,
btdonovan said:
ADB commands aren't used in fastboot mode. You should be able to see the device in fastboot mode with the command fastboot devices. Also, remember that the stock rom will try to restore the stock recovery when it is booted so if you flash recovery in fastboot mode then let the stock rom boot it will reflash the stock recovery which shows you the little droid and the red triangle.
You should still be okay though. Shut the phone off and boot into fastboot manually with power and volume down. Reflash the recovery. I know there are warnings about using mfastboot but I used standard fastboot before I saw those and didn't have an issue. From the fastboot screen after flashing the recovery, use volume down to get to highlight recovery and then press volume up to select, not power. Power will just do a standard reboot.
If you flashed twrp recovery then rebooting system will prompt you to install su. I think clockwork does the same thing. Letting the recovery install su will also prevent the stock recovery from getting restored and from there you should be good.
Click to expand...
Click to collapse
THANKS! just needed another set of eyes - man i need to not try doing this after a long day again i really appreciate your help. i got it now!
herrdrchili said:
THANKS! just needed another set of eyes - man i need to not try doing this after a long day again i really appreciate your help. i got it now!
Click to expand...
Click to collapse
Glad I could help!
Hi,
I was on 5.0, running stock recovery and rooted. Today, installed TWRP for 5.0 on my device. I tried to flash the droid command center widget on my phone usng twrp, and it failed. I also hit the fix permissions option. After that the phone does not boot up, simply flashes the unlocked bootloader sign and shows the moto boot animation for a second or two before shutting down.
I can boot into recovery, and the computer detects the phone. But adb doesn't detect the device. I have the 1092 5.0 OTA on my computer and saved it on the phone in an attempt to flash it thru TWRP, but that failed with the message shown in the img attached. I also tried flashing stock 4.4.4, but that gave an error "Updating partition details" failed.
Can someone help me get back into my phone? :crying: ADB doesn't seem to be detecting my phone, else I'd have tried to install a rom via fastboot.
I have multi-tool v4.1 installed, would I be able to flash a rom (stock unrooted and full wipe is perfectly fine too) via that considering adb does not detect my phone, but the computer does?
Well, that looks annoying.
I've found myself in similar situations when I've accidentally flashed something I shouldn't have. The good news is that if you can boot to recovery you can also probably boot to the bootloader and use fastboot.
Have you tried wiping everything and going back to stock? It's time consuming but at least you'll end up with a working phone.
I had to do this when I put the wrong recovery on a phone and it mangled partitions. Device wouldn't boot.
There are instructions for the moto x here
http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657
oldcynic said:
Well, that looks annoying.
I've found myself in similar situations when I've accidentally flashed something I shouldn't have. The good news is that if you can boot to recovery you can also probably boot to the bootloader and use fastboot.
Have you tried wiping everything and going back to stock? It's time consuming but at least you'll end up with a working phone.
I had to do this when I put the wrong recovery on a phone and it mangled partitions. Device wouldn't boot.
There are instructions for the moto x here
http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657
Click to expand...
Click to collapse
Thanks for the reply! Color me silly, but would I be able to use fastboot given that when I run adb the 'adb devices' command does not show my phone?
HAXTREME said:
Thanks for the reply! Color me silly, but would I be able to use fastboot given that when I run adb the 'adb devices' command does not show my phone?
Click to expand...
Click to collapse
Because fastboot mode can start on your device even before Android loads (and can even run when Android isn't installed at all), fastboot mode is useful for updating the firmware quickly, without having to use a recovery mode.
Adb relies on android booting and usb debugging being enabled and the computer being authorized for debugging (L feature). Fastboot does not. Try booting into the bootloader and then run "fastboot devices" . Mine shows up. I suspect yours will too. If it doesn't then I'm out of my depth here.
oldcynic said:
Because fastboot mode can start on your device even before Android loads (and can even run when Android isn't installed at all), fastboot mode is useful for updating the firmware quickly, without having to use a recovery mode.
Adb relies on android booting and usb debugging being enabled and the computer being authorized for debugging (L feature). Fastboot does not. Try booting into the bootloader and then run "fastboot devices" . Mine shows up. I suspect yours will too. If it doesn't then I'm out of my depth here.
Click to expand...
Click to collapse
Ah yes. For some reason, my fastboot file had gotten deleted from the folder and so the command didn't run. Everything went smooth once I noticed that. Had to downgrade to 4.4.4., but w/e. Thanks @oldcynic
Hi all, I did a dumb thing and I took the recent Verizon OTA on my dev ed moto x with a custom recovery installed (TWRP).
Now my phone seems to always stop booting at recovery, then if i hit 'reboot system' from recovery, I can get into my system for about 2-3 minutes, and then it reboots to recovery again.
Any help would be greatly appreciated!
boot your phone into fastboot/bootloader mode, then flash stock Recovery on your phone and reboot normally.
KidJoe said:
boot your phone into fastboot/bootloader mode, then flash stock Recovery on your phone and reboot normally.
Click to expand...
Click to collapse
Thanks KidJoe - I'm reading through your post on xda right now to see how you flash back to the stock recovery and I'm currently downloading the stock image from one of your links.
While I'm waiting, I'm going over my options for how to actually flash the stock recovery - your post said that i should try Rashr - however my device probably won't stay 'on' long enough for me to get through that process. After it boots into the system (e.g. I see my launcher and apps), it wants to restart since I guess it's trying to the upgrade. So I'm thinking of instead using adb to flash the recovery.img file. Is that the right path to take?
Also - would it be okay to use adb to flash the recovery.img using TWRP's adb sideload feature? I seem to be able to connect using adb that way, but for some reason 'adb devices' doesn't list anything under fastboot.
switch81 said:
Thanks KidJoe - I'm reading through your post on xda right now to see how you flash back to the stock recovery and I'm currently downloading the stock image from one of your links.
While I'm waiting, I'm going over my options for how to actually flash the stock recovery - your post said that i should try Rashr - however my device probably won't stay 'on' long enough for me to get through that process. After it boots into the system (e.g. I see my launcher and apps), it wants to restart since I guess it's trying to the upgrade. So I'm thinking of instead using adb to flash the recovery.img file. Is that the right path to take?
Also - would it be okay to use adb to flash the recovery.img using TWRP's adb sideload feature? I seem to be able to connect using adb that way, but for some reason 'adb devices' doesn't list anything under fastboot.
Click to expand...
Click to collapse
First, if you can't boot your phone into Android, you can't use Rashr.
Next... ADB needs you to be up in Android, and have the "USB Debugging" options checked. Also, it can not be used to flash the components of the SBF/ROM like recovery.img.
Fastboot mode works with Fastboot.exe or mFastboot.exe... ADB commands do not work when the phone is in fastboot mode.
Here is what you want to do AFTER you have the stock reocvery.img you want to flash... (this is pretty much exactly what you did to flash TWRP on there in the first place, except you will be flashing a stock recovery.img instead)
have the latest Moto drivers installed. You can get them from -> https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
Make sure you have the Android SDK/Platform Tools installed (don't know how, see -> http://mark.cdmaforums.com/ADB.htm )
You need the latest version of Moto's fastboot, and it needs to be put in your windows Path (there are steps on -> http://mark.cdmaforums.com/ADB.htm )
Once you have that... do the following...
Unplug phone
Power down phone.
Hold Volume Down and Power
After a few seconds release Power, you should be in fastboot menu on phone.
Connect to PC.
open command prompt file and change to the folder you have your recovery.img you want to flash
type the following, pressing enter after each command, and wait for it to finish before going onto the next...
mfastboot flash recovery recovery.img
mfastboot reboot-bootloader
The device will display different BOOT OPTIONS
Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to select
The device will display the Motorola logo and then the Android in distress (logo with Exclamation mark)
Press and hold the VOL UP key for 10-15 seconds. While still holding the VOL UP key tap and release the POWER key
You should enter STOCK recovery.
use the VOL DOWN Key to scroll and the POWER Key to select reboot.
The phone should reboot and and be ready for the update
I did the same thing and was able to undo it by clearing the cache. Now I'm back to where I was before, with the constant notification to update.
Wondering what the correct way to go about updating is..
*Edit: Thanks!
Moto X Dev
Thanks! I'm back up and running!
Sorry for the confusion on the adb vs fastboot stuff - I always mix those kinds of things up since I do it once ages ago to get myself into this mess, then I forget how I did it and what tools I used.
So basically what I did was use fastboot like you said and first booted into fastboot, then did a 'fastboot flash recovery recovery.img' from a stock recovery.
After a full reboot, android ended up giving me a 'update was unsuccessful' which I am totally 100% okay with. I ended pushing 'update' the first time really because I was tired of getting nagged - this time i just said 'don't install' and hopefully it won't bother me agian.
Thanks again!
slynke said:
I did the same thing and was able to undo it by clearing the cache. Now I'm back to where I was before, with the constant notification to update.
Wondering what the correct way to go about updating is..
*Edit: Thanks!
Moto X Dev
Click to expand...
Click to collapse
I'm sure KidJoe will respond, but I found this thread of his very useful:
http://forum.xda-developers.com/moto-x/general/ref-return-to-stock-recovery-rooted-t3027079
switch81 said:
Thanks! I'm back up and running!
Sorry for the confusion on the adb vs fastboot stuff - I always mix those kinds of things up since I do it once ages ago to get myself into this mess, then I forget how I did it and what tools I used.
So basically what I did was use fastboot like you said and first booted into fastboot, then did a 'fastboot flash recovery recovery.img' from a stock recovery.
After a full reboot, android ended up giving me a 'update was unsuccessful' which I am totally 100% okay with. I ended pushing 'update' the first time really because I was tired of getting nagged - this time i just said 'don't install' and hopefully it won't bother me agian.
Thanks again!
Click to expand...
Click to collapse
I was able to flash back to stock recovery and take the 212.166.3 build KXA21.12-L1.26-3 (which is still 4.4.4) OTA that Verizon is pushing out.
I didn't even have to disable Xposed or anything else. Then again, other than Xposed, root and twrp, I'm running stock. No tethering hacks, build.prop changes, no system files removed or renamed, etc.
---------- Post added at 01:18 PM ---------- Previous post was at 01:16 PM ----------
slynke said:
I did the same thing and was able to undo it by clearing the cache. Now I'm back to where I was before, with the constant notification to update.
Wondering what the correct way to go about updating is..
*Edit: Thanks!
Moto X Dev
Click to expand...
Click to collapse
Yup., Clearing cache will delete the OTA ZIP file that was downloaded. So the next time you reboot, it wont try to install, instead you'll be back to being notified that an update is available asking you if you want to download it.
But yup, those instructions I just typed should work...
This OTA seems so minimal in changes, any suggestions/recommendations if I should take it at all?
I'm also pretty much stock now as well - only root, xposed installed.
switch81 said:
This OTA seems so minimal in changes, any suggestions/recommendations if I should take it at all?
I'm also pretty much stock now as well - only root, xposed installed.
Click to expand...
Click to collapse
The release notes on VZW's page only seems to mention bug fixes.. no real details.
So far I haven't noticed any changes.
It will likely be a required step to get to lollipop. So either take it now, or wait and take it later, just before you upgrade to Lolliop
I'm running the Android SDK on linux (Ubuntu). My stock H81110n G4 is connected via USB cable and it is listed properly when I run `adb devices`. However, the command `adb reboot bootloader` simply reboots the phone into Android.
I can't boot into the bootloader. What is the solution for this?
Of course, I have USB Debugging enabled. I also checked OEM Unlock just to see if that helped. It didn't. My phone is not bootloader unlocked yet. I plan to do that next, but first I want to be reboot into the bootloader (e.g., to get the device ID for the LGE Developer site).
Thanks for any assistance.
You don't need to use the LGE developer site to unlock your bootloader. From what I understand, as soon as you tick the OEM unlock then you are unlocked. The LG site is for 815 only.
hyperfriend said:
You don't need to use the LGE developer site to unlock your bootloader. From what I understand, as soon as you tick the OEM unlock then you are unlocked. The LG site is for 815 only.
Click to expand...
Click to collapse
Thanks for that info. However, that's not really my question. My question is why `adb reboot bootloader` causes the phone to boot into Android instead of into the bootloader. That's my real issue.
`adb reboot download` doesn't work either. It simply reboots into Android. Therefore, I'm not able to install TWRP or do anything else I want to do.
Also, using the phone's power and vol-down buttons will not boot it into the bootloader, so something seems strange with this phone. I haven't run into this issue on other phones. I rooted an HTC One M9 today. But I can't get past this step with the LG G4.
MountainX said:
Thanks for that info. However, that's not really my question. My question is why `adb reboot bootloader` causes the phone to boot into Android instead of into the bootloader. That's my real issue.
`adb reboot download` doesn't work either. It simply reboots into Android. Therefore, I'm not able to install TWRP or do anything else I want to do.
Also, using the phone's power and vol-down buttons will not boot it into the bootloader, so something seems strange with this phone. I haven't run into this issue on other phones. I rooted an HTC One M9 today. But I can't get past this step with the LG G4.
Click to expand...
Click to collapse
That is strange, but I don't see why you need to reboot to the bootloader if it's already unlocked. Try to flash TWRP and see what happens.
hyperfriend said:
That is strange, but I don't see why you need to reboot to the bootloader if it's already unlocked. Try to flash TWRP and see what happens.
Click to expand...
Click to collapse
Like I mentioned in the OP, my H81110n LG G4 is stock. It is not rooted. As far as I know, flashing TWRP requires booting into recovery / download mode first. Here's how I usually do it:
In a linux terminal:
Code:
/opt/android-sdk-linux/platform-tools# ./adb devices
/opt/android-sdk-linux/platform-tools# ./adb reboot download
/opt/android-sdk-linux/platform-tools# ./fastboot flash recovery recovery.img
This phone will not boot into download (or bootloader). All it does is reboot into Android OS. Any ideas?
Bump.
I'm having this same issue. Hardware keys and proper adb commands to get to bootloader are ineffective. Suggestions??
---------- Post added at 02:33 AM ---------- Previous post was at 02:25 AM ----------
MattKilla said:
Bump.
I'm having this same issue. Hardware keys and proper adb commands to get to bootloader are ineffective. Suggestions??
Click to expand...
Click to collapse
ACTUALLY-- solved.
Hold Vol-Up and plug into the PC. Do not press power. Holing Vol-Up and inserting the USB cable will trigger "download mode". Bootloader.
Booting into download mode is Vol UP + Plug in USB (While the phone is off)
You can then use the low effort root if on firmware H or Rhyda's thread in the dev section for firmware N to get root.
I can't get into the bootloader either, I think T-Mobile did something. After rooting you can download a terminal emulating app and just run the command:
>su
(grant SU permissions)
>reboot bootloader
Have you tried flashing TWRP using Flashify? I think that how I installed it on my H811 (should've taken notes >.< )
I don't know of any way to access the bootloader either. Typing "su" and "reboot bootloader" in the terminal doesn't work, nor does using an app like ROM Toolbox.
I posted this in another thread. This was the only way I could workaround this problem.
Many ADB bootloader commands do not work on this model. Nor do I think they work on any G4. Not sure why LG went this route, whereas on the V10 (some models at least) it's as easy as a Nexus.
I forgot, how do you reboot into fastboot again?
So I just got my shiny new Nokia 8 and it seems to be updated to the latest version of Pie. Reading through all the root forums/threads, I'm noticing a couple issues with my phone that I'm not seeing mentioned:
-In Dev settings, OEM unlocking is off and grayed out, I can't toggle it.
-When I try to access download mode/bootloader (volume down/plug in cable from pc) my screen does a little flashy thing and then goes straight to the battery percentage.
-I can ADB devices just fine and see the phone, when I ADB reboot bootloader, the phone gets stuck on a screen showing "powered by android'', with "download mode" in the upper left corner, and any fastboot commands return absolutely nothing.
Any tips or suggestions?
Many thanks
jgro1976 said:
So I just got my shiny new Nokia 8 and it seems to be updated to the latest version of Pie. Reading through all the root forums/threads, I'm noticing a couple issues with my phone that I'm not seeing mentioned:
-In Dev settings, OEM unlocking is off and grayed out, I can't toggle it.
-When I try to access download mode/bootloader (volume down/plug in cable from pc) my screen does a little flashy thing and then goes straight to the battery percentage.
-I can ADB devices just fine and see the phone, when I ADB reboot bootloader, the phone gets stuck on a screen showing "powered by android'', with "download mode" in the upper left corner, and any fastboot commands return absolutely nothing.
Any tips or suggestions?
Many thanks
Click to expand...
Click to collapse
- you cant toggle it because you have not unlocked the bootloader. Sometimes even after you unlock it it will be greyed out, which isnt of importance. To unlock the bootloader downgrade to Oreo November update by sideloading the relevant ROM, then follow the the official HMD instructions.
- Make sure USB debugging is turned on under developer options.
- Are you attempting to boot into the OS or recovery here? Abd reboot is enough to boot into your system. To boot into recovery use adb reboot recovery. Or do it manually using the keys.
Ok, everything I've read so far says to make sure OEM unlock is enabled before you do anything else, so you've confused me now. And none of the guides talk about sideloading the ROM, so you've thrown a new twist with that as well.
USB debugging is enabled, and my computer sees the device via adb devices, but if I try adb reboot recovery, all I get is the little android icon with the red triangle over him, and if I try adb reboot bootloader, basically nothing happens. And I wasn't trying to boot into the OS or recovery, I'm not a noob but maybe this phone is just different enough from what I'm used to I guess.
So basically I'm stuck right now, can't boot into recovery, can't sideload a ROM, can't boot into the bootloader/download mode either.
MDV106 said:
- you cant toggle it because you have not unlocked the bootloader. Sometimes even after you unlock it it will be greyed out, which isnt of importance. To unlock the bootloader downgrade to Oreo November update by sideloading the relevant ROM, then follow the the official HMD instructions.
- Make sure USB debugging is turned on under developer options.
- Are you attempting to boot into the OS or recovery here? Abd reboot is enough to boot into your system. To boot into recovery use adb reboot recovery. Or do it manually using the keys.
Click to expand...
Click to collapse
Actually, thank you, you got me thinking and I was able to get downgraded to the Oreo, got my code from Nokia and unlock.key, now the only thing I'm still having a hard time with is my computer won't detect my phone in fastboot mode. Works just fine in normal ADB commands, but no fastboot...
You'd think my drivers are all fine and that since ADB sees the device, but maybe not?
jgro1976 said:
Ok, everything I've read so far says to make sure OEM unlock is enabled before you do anything else, so you've confused me now. And none of the guides talk about sideloading the ROM, so you've thrown a new twist with that as well.
USB debugging is enabled, and my computer sees the device via adb devices, but if I try adb reboot recovery, all I get is the little android icon with the red triangle over him, and if I try adb reboot bootloader, basically nothing happens. And I wasn't trying to boot into the OS or recovery, I'm not a noob but maybe this phone is just different enough from what I'm used to I guess.
So basically I'm stuck right now, can't boot into recovery, can't sideload a ROM, can't boot into the bootloader/download mode either.
Click to expand...
Click to collapse
Bootloader, unlocked! Now if I can get the rest of my home wireless **** to work this well/easily, thank you for getting me pointed in the right direction, all good here (I hope).
jgro1976 said:
Actually, thank you, you got me thinking and I was able to get downgraded to the Oreo, got my code from Nokia and unlock.key, now the only thing I'm still having a hard time with is my computer won't detect my phone in fastboot mode. Works just fine in normal ADB commands, but no fastboot...
You'd think my drivers are all fine and that since ADB sees the device, but maybe not?
Click to expand...
Click to collapse
jgro1976 said:
Bootloader, unlocked! Now if I can get the rest of my home wireless **** to work this well/easily, thank you for getting me pointed in the right direction, all good here (I hope).
Click to expand...
Click to collapse
Im guessing you finally realised they after getting the android icon with the red triangle u have to press volume up and hold it then tap the power key to enter the recovery. Good to know you managed to unlock the bootloader eventually.
A lot of people have been having issues with fastboot, especially on Windows machines . Try restarting the shell or use a different USB port on your computer?also maybe try a different driver version and see if it helps.