I had android GE 4.3 on it, rooted.
I have the original GE bootloader (that robot) installed.
I downloaded the official 4.4 update through android, rebooted for install.
Now after the install the phone does not boot up anymore, instead it goes into RECOVERY and shows that triangle robot.
I tried wipe of cache and data wipe.
Whatever i try I am not able to get this device into fastboot / bootloader anymore!
It takes longer than usual,, it is stuck in that HTC screen since I have unlocked the bootloader but it does not enter the usual menu.
Instead it just directly goes to the robot.
I tried about everything I could think about,
It seems the OTA really bricked my phone by damaging the bootloader so it does not load at all anymore.?!?!
The only USB accessible feature I see is that in the robot screen it registers a device through USB.
Sadly not ADB or fastboot, it is a volume. It even loads as volume but is inaccessible (like a CD without disk)
Windows recognizes it as WDP FileSystem.
I doubt this will help at all, just wanted to note it.
I am about to throw the phone into trash, if it had not been so expensive.. Anything that can be done to repair this brick ?
Lirezh said:
I had android GE 4.3 on it, rooted.
I have the original GE bootloader (that robot) installed.
I downloaded the official 4.4 update through android, rebooted for install.
Now after the install the phone does not boot up anymore, instead it goes into RECOVERY and shows that triangle robot.
I tried wipe of cache and data wipe.
Whatever i try I am not able to get this device into fastboot / bootloader anymore!
It takes longer than usual,, it is stuck in that HTC screen since I have unlocked the bootloader but it does not enter the usual menu.
Instead it just directly goes to the robot.
I tried about everything I could think about,
It seems the OTA really bricked my phone by damaging the bootloader so it does not load at all anymore.?!?!
The only USB accessible feature I see is that in the robot screen it registers a device through USB.
Sadly not ADB or fastboot, it is a volume. It even loads as volume but is inaccessible (like a CD without disk)
Windows recognizes it as WDP FileSystem.
I doubt this will help at all, just wanted to note it.
I am about to throw the phone into trash, if it had not been so expensive.. Anything that can be done to repair this brick ?
Click to expand...
Click to collapse
Now search for the right adb and fastboot driver. There is a .msi installer (adb + fastboot .msi) something like that. Than push the right recovery via fastboot. Voila
Alfa Kenny One said:
Now search for the right adb and fastboot driver. There is a .msi installer (adb + fastboot .msi) something like that. Than push the right recovery via fastboot. Voila
Click to expand...
Click to collapse
Hi,
I solved it.
It took about 30-50 reboots until the phone entered the fastboot menu.
The problem was that the phone kept skipping the whole fastboot menu and went into recovery instead.
A very strange firmware bug caused by the failed OTA
Hoping somebody can help me figure out what is going on with my phone. Sorry for the long post, but hoping folks with custom rom and flashing experience will read on to help.
I have the Verizon Developer Edition. I have unlocked the bootloader, installed TWRP 2.7, and rooted the phone. I have never installed any custom ROMs on the phone. I had done custom ROMs on my GS3, but I just wanted this phone rooted, and maybe mess around with a few ROMs down the road.
I followed this video from RootJunky when I originally installed TWRP.
So a few weeks ago I kept getting the OTA message to upgrade to the latest kitkat. I decided to flash back to the original recovery so I could do the upgrade. I contacted RootJunky on his youtube channel and he provided a link to the stock recovery and I flashed it using the same video and his linked file.
After flashing the stock recovery, when I was in bootloader mode, I scrolled down to "recovery" and selected it. It would not go into recovery. It just stays in a bootloop. I went back and forth with RootJunky a few times trying to resolve this, but I got no response to my last few comments.
I can get the phone back into bootloader mode by holding the volume up/dwn and power buttons, if I time it correctly during the bootloop. When in bootloader mode, I can select "Normal Powerup" option and the phone will boot up and function properly. But, if I shut the phone down, I can't turn the device on with the power button, otherwise it will just bootloop. I have to get into bootloader mode, then select "Normal Powerup" to get the phone to work.
Once back in the phone, my USB debugging option is unchecked. I can recheck it, open a command prompt, and do a "adb devices" and it shows it connected. But if I do a "adb reboot bootloader" from the command prompt it will bootloop.
When I get into bootloader mode manually, when I connect it to the computer, and do a "adb devices", it doesn't show as connected, as I think the USB debugging option is getting toggled off somehow, so I can't connect or flash anything to the phone at this point.
One thing I see, in the video @ 4:50, he says you need to be at "status code 1" to flash recoveries. I am/was at status code 3. Not sure if that is why I am having this issue, or how to get this changed.
Any help would be greatly appreciated. I can use the phone just fine, but at this point, I would just like to be able to do a full restore to stock, upgrade to 4.4.4, keep the unlocked bootloader, and root the phone. No custom ROM.
THANKS!
08G8V8 said:
Hoping somebody can help me figure out what is going on with my phone. Sorry for the long post, but hoping folks with custom rom and flashing experience will read on to help.
I have the Verizon Developer Edition. I have unlocked the bootloader, installed TWRP 2.7, and rooted the phone. I have never installed any custom ROMs on the phone. I had done custom ROMs on my GS3, but I just wanted this phone rooted, and maybe mess around with a few ROMs down the road.
I followed this video from RootJunky when I originally installed TWRP.
So a few weeks ago I kept getting the OTA message to upgrade to the latest kitkat. I decided to flash back to the original recovery so I could do the upgrade. I contacted RootJunky on his youtube channel and he provided a link to the stock recovery and I flashed it using the same video and his linked file.
After flashing the stock recovery, when I was in bootloader mode, I scrolled down to "recovery" and selected it. It would not go into recovery. It just stays in a bootloop. I went back and forth with RootJunky a few times trying to resolve this, but I got no response to my last few comments.
I can get the phone back into bootloader mode by holding the volume up/dwn and power buttons, if I time it correctly during the bootloop. When in bootloader mode, I can select "Normal Powerup" option and the phone will boot up and function properly. But, if I shut the phone down, I can't turn the device on with the power button, otherwise it will just bootloop. I have to get into bootloader mode, then select "Normal Powerup" to get the phone to work.
Once back in the phone, my USB debugging option is unchecked. I can recheck it, open a command prompt, and do a "adb devices" and it shows it connected. But if I do a "adb reboot bootloader" from the command prompt it will bootloop.
When I get into bootloader mode manually, when I connect it to the computer, and do a "adb devices", it doesn't show as connected, as I think the USB debugging option is getting toggled off somehow, so I can't connect or flash anything to the phone at this point.
One thing I see, in the video @ 4:50, he says you need to be at "status code 1" to flash recoveries. I am/was at status code 3. Not sure if that is why I am having this issue, or how to get this changed.
Any help would be greatly appreciated. I can use the phone just fine, but at this point, I would just like to be able to do a full restore to stock, upgrade to 4.4.4, keep the unlocked bootloader, and root the phone. No custom ROM.
THANKS!
Click to expand...
Click to collapse
First, Status code 3 is normal - that indicates an unlocked bootloader.
You should be able to use the 4.4.4 FXZ to flash back to 100% stock. Afterwards, you can flash TWRP, and re-root. Use the latest TWRP from here: http://techerrata.com/browse/twrp2/ghost
The important thing about TWRP is that immediately after flashing it, you have to "fastboot reboot-bootloader" and immediately boot into recovery - otherwise it doesn't 'stick'. We don't know why, but as long as you do it that way, you will be fine.
Here is the link for the 4.4.4 FXZ: http://forum.xda-developers.com/moto-x/general/fxz-moto-x-4-4-4-212-55-26-t2827307
If you follow the instructions, you will be on stock, rooted 4.4.4 in less than 20 minutes.
Good Luck, and let me know if you need additional assistance :good:
Also, please remember to post your questions to Q&A - not General. Don't worry as I have already requested that the Mods move it to the appropriate sub-forum.
EDIT: The problem I see with "rootjunky"s video is that first, he advises that "Status code 1" is required to flash recovery -- this is incorrect. Status code 3 works fine for custom recovery.
Additionally, he did not "fastboot reboot-bootloader" before booting into recovery. This is necessary. I'm not sure why he left that step out....likely he already had custom recovery flashed when he made the video.
Thanks for the quick response. Sorry about posting in the wrong section. I should have known better.....
I will look at this, but probably won't do it until after work tomorrow. I will post back tomorrow, hopefully with success.
Thanks!
I saw your edit to your post. I did the reboot boot loader step when I originally flashed twrp. I can't remember where I saw it, but I remember reading it and doing it.
The phone was running fine with twrp installed for a few months. The problem I am having now happened after flashing the stock recovery back onto the phone.
Do you recommend the RSD Flasher or House of Moto method to flash this FXZ?
08G8V8 said:
I saw your edit to your post. I did the reboot boot loader step when I originally flashed twrp. I can't remember where I saw it, but I remember reading it and doing it.
The phone was running fine with twrp installed for a few months. The problem I am having now happened after flashing the stock recovery back onto the phone.
Do you recommend the RSD Flasher or House of Moto method to flash this FXZ?
Click to expand...
Click to collapse
Either will work fine. If you don't care about keeping your data, you can use RSD Lite (will wipe everything). If you use one of the tools in the thread I linked you to, make absolutely sure you follow the instructions -- you can't have any spaces in any folder-names. If you use RSD Lite, you just select the zip file and flash (no worries about directory structure).
Ok, I just assumed those were the methods to flash it. I will look into the RSD Lite method, as if don't mind wiping the data.
I just watched a quick video on YouTube about using RSD Lite, and they state you must reboot the boot loader and do the flash in fastboot. I can't reboot into the bootloader from the command prompt, as it goes into the boot loop. I can get into fastboot manually, but when connecting to the computer it doesn't recognize it since the USB debugging option keeps getting reset on me.
Am I missing something? I don't see how I can flash this.
08G8V8 said:
I just watched a quick video on YouTube about using RSD Lite, and they state you must reboot the boot loader and do the flash in fastboot. I can't reboot into the bootloader from the command prompt, as it goes into the boot loop. I can get into fastboot manually, but when connecting to the computer it doesn't recognize it since the USB debugging option keeps getting reset on me.
Am I missing something? I don't see how I can flash this.
Click to expand...
Click to collapse
So you are telling me that when you type "adb reboot bootloader" (if usb debugging is enabled) or "fastboot reboot-bootloader" (if usb debugging is not enabled) it doesn't take you to the "AP Fastboot Mode" screen?
samwathegreat said:
So you are telling me that when you type "adb reboot bootloader" (if usb debugging is enabled) or "fastboot reboot-bootloader" (if usb debugging is not enabled) it doesn't take you to the "AP Fastboot Mode" screen?
Click to expand...
Click to collapse
Sorry, the "adb reboot bootloader" sends me into the bootloop.
I hadn't tried the "fastboot reboot bootloader" or "fastboot reboot-bootloader". Now when I try that, with USB debugging checked I just get "<waiting for device>" It does nothing.
What about turning off the device. Then holding power button and volume down at the same time. Does it take you to the bootloader screen like it should?
It sounds to me like when you were attempting you flash your stock recovery back, you flashed it to the wrong partition. I've seen another member do this....
He accidentally typed "fastboot flash bootloader stockrecoveryfile.img"
That would cause the issues you are describing... I might have a way to fix it if you are currently still rooted and able to access adb...
Travisdroidx2 said:
What about turning off the device. Then holding power button and volume down at the same time. Does it take you to the bootloader screen like it should?
Click to expand...
Click to collapse
Yes, I can manually get into bootloader, but it keeps toggling my USB debugging option, so when I connect it to the computer, it doesn't see it.
08G8V8 said:
Yes, I can manually get into bootloader, but it keeps toggling my USB debugging option, so when I connect it to the computer, it doesn't see it.
Click to expand...
Click to collapse
USB debugging isn't used in the bootloader, and adb isn't used for fastboot mode... I'm very confused by what you are saying...
Once you are in the boot loader screen does "fastboot devices" recognize your device?
samwathegreat said:
It sounds to me like when you were attempting you flash your stock recovery back, you flashed it to the wrong partition. I've seen another member do this....
He accidentally typed "fastboot flash bootloader stockrecoveryfile.img"
That would cause the issues you are describing... I might have a way to fix it if you are currently still rooted and able to access adb...
Click to expand...
Click to collapse
No, I typed "fastboot flash recovery stockrecoveryfile.img"
I did just like originally when flashing TWRP, just replaced the file in the command line.
I am still rooted.
samwathegreat said:
USB debugging isn't used in the bootloader, and adb isn't used for fastboot mode... I'm very confused by what you are saying...
Click to expand...
Click to collapse
I can get into fastboot with the phone powered off, holding the volume UP/DWN and PWR. But when connected to the computer it isn't recognized.
Sorry, but I am confused as well. I am just going off what I have seen in RootJunky's videos. In this video, https://www.youtube.com/watch?v=1LkuLb8hV6Q#t=285 at 4:44, after he does the "adb reboot bootloader" he says the device is now in "bootloader mode" which is what I am talking about, but I guess is actually Fastboot Mode. This is the same mode I am talking about getting into from the device powered off holding the volume UP/DWN and PWR buttons, but going in this way doesn't get recognized by the computer.
Travisdroidx2 said:
Once you are in the boot loader screen does "fastboot devices" recognize your device?
Click to expand...
Click to collapse
YES it does! Thanks. I kept trying "adb devices", and when it wasn't recognizing it, I figured it wasn't connected. I wasn't doing "fastboot devices". But, my USB debugging still was getting unchecked after getting back into the phone.
So with it recognizing my device in fastboot mode I should be able to go ahead with the RSD Lite flashing?
08G8V8 said:
No, I typed "fastboot flash recovery stockrecoveryfile.img"
I did just like originally when flashing TWRP, just replaced the file in the command line.
I am still rooted.
I can get into fastboot with the phone powered off, holding the volume UP/DWN and PWR. But when connected to the computer it isn't recognized.
Sorry, but I am confused as well. I am just going off what I have seen in RootJunky's videos. In this video, https://www.youtube.com/watch?v=1LkuLb8hV6Q#t=285 at 4:44, after he does the "adb reboot bootloader" he says the device is now in "bootloader mode" which is what I am talking about, but I guess is actually Fastboot Mode. This is the same mode I am talking about getting into from the device powered off holding the volume UP/DWN and PWR buttons, but going in this way doesn't get recognized by the computer.
Click to expand...
Click to collapse
OK, glad you didn't flash to bootloader. That is tricky to fix...but I've dealt with people who have done it before.
Try another PC...or re-install the drivers. Also, DO NOT use a usb 3.0 port, always use 2.0.
Bootloader = AP fastboot mode. They are one and the same. Try to get it recognized with "fastboot devices", on any PC. If you can get to that point, you can flash back to stock and recover everything. The FXZ can actually FIX a corrupted or damaged filesystem. It replaces all the relevant partitions.
Remember you do NOT use adb or usb debugging. They have nothing to do with fastboot.
---------- Post added at 09:10 PM ---------- Previous post was at 09:09 PM ----------
08G8V8 said:
YES it does! Thanks. I kept trying "adb devices", and when it wasn't recognizing it, I figured it wasn't connected. I wasn't doing "fastboot devices". But, my USB debugging still was getting unchecked after getting back into the phone.
So with it recognizing my device in fastboot mode I should be able to go ahead with the RSD Lite flashing?
Click to expand...
Click to collapse
YES!!!!
It seems you were confusing adb and fastboot. As long as "fastboot devices" recognizes your device, SO WILL RSD LITE!!!
Now follow my initial instrucitons, and you will be up and running in no time...
Thanks guys! I am going to do this tomorrow, but I feel pretty good that it is going to work.
Yes, I got VERY confused, and definitely need to go study up some more. I thought I had it, but obviously not.
Will report back tomorrow.
Happy to help
Absolutely get the Dev Edition for the same price. While Safestrap is out for other Galaxy devices with locked bootloaders (not sure if the S5 got SS yet) it allows customs Roms....but not kernel changes. With a Dev edition, there may be less development, but I'm sure there will still be some development out there.
I'm stuck at an issue that I've never seen before and need some assistance. I flashed invictrix 8.1.0 not to long ago and then installed an updated version of the rom through the rom's updater. It went through the automated flashing of the updated version and now I'm stuck in a recovery that seems to be stock, but it's not the stock version I am accustomed to seeing. I can not do anything in this recovery. I have used adb to do things before, but now adb and fastboot seem to get stuck at waiting for device errors or error:device not found even though adb devices and fastboot devices brings up the phone being connected. I now can no longer boot into the phone as I did a hard reset while my phone was operational.
Have you tried booting straight into fastboot mode by holding down Power+Vol Up until it reboots? And then see if you can use fastboot on your PC to flash TWRP again.
Also, all those error messages. Did you at some point reformat the cache partition as f2fs? It's supposed to be ext4..
I can boot into fastboot. The computer recognizes the phone through fastboot devices and adb devices. However, issuing a command through fastboot results in a waiting for device message. Maybe I need to find a more suitable adb. The one I’ve been using is the 15 second adb that only installs the google driver and the adb. I never formatted anything. I’m not sure what to do at this point.
I would use an unbrick guide and start from scratch.
Is there one you'd recommend ? I'm using this one :
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
Yes, I also used it in the past and everything was ok.
Ok..so here's the situation. I was going to install a new ROM ( my son got a new phone a iphone ) but any ways. As I was in TWRP i did everything we all normally do but the phone died mid flashing GAPPS. when i went to pulg the phone to the charger and restart the phone i see that it started to boot up the it jumped straight to FASTBOOT and it's stuck. I can toggle through fastboot but that is it. when i go to restart it will show the boot animation but then goes to fast boot. it wont go to TWRP nothing. I've combed XDA and found the multi tool but don't think that is working or i might be using it wrong. the computer doesn't recognize the phone. im trying to get this phone back up and going and give to my daughter . any help is greatly appreciated. thank you in advacne.
Here's what I'm talking about just in case someone asks
Try installing a stock factory image from fastboot.
runekock said:
Try installing a stock factory image from fastboot.
Click to expand...
Click to collapse
How...I can't get my computer to recognize the phone... When I plug it in it doesn't read it...I should have the drivers already installed...adb push right.... I'll search for the command to see if it finds the phone
adb never works in fastboot mode. You'll have to use the fastboot command.
On the PC, try
fastboot devices
to see whether the phone is available. If not, check your drivers - I believe that fastboot uses a different USB driver.
With fastboot, you can't install zip-files, only image files. So download the stock factory image, not the OTA.
runekock said:
adb never works in fastboot mode. You'll have to use the fastboot command.
On the PC, try
fastboot devices
to see whether the phone is available. If not, check your drivers - I believe that fastboot uses a different USB driver.
With fastboot, you can't install zip-files, only image files. So download the stock factory image, not the OTA.
Click to expand...
Click to collapse
Thanks for the heads up I'll definitely be trying this and I'll give you an update soon
Hi all,
I'm encountering a very annoying issue with my brand new Zenfone 8.
I wanted to install the last LineageOS image, but now my phone seems stuck.
Here are what I did:
- Unlocked the bootloader: success with the ASUS APK after a few tries (error 11000 and 11006 ans eventually worked).
- Rebooted to bootloader
- Entered into recovery
- Used fastboot to flash the vendor partition.
At this point, everything looked OK. But then.... :
- Powered off the phone and restarted to bootloader.
- Tried to enter into recovery to flash the Lineage Recovery
But at this point, I had a ASUS logo stucked on the screen.
I can't do anything with adb or fastboot commands.
I tried the method explained here (https://www.asus.com/Content/Android-13-Beta/) to rollback to stock Android 12, but nothing happened too: I looked at the shell script (I'm on Linux) and I reckon that it stucks on fastboot command (the phone is in the bootloader).
Any idea about what failed? The last command used (vendor partition flash) said "OKAY".
And especially, what can I do now? Any way to reinstall the ASUS recovery?
Thanks in advance guys.
Not quite sure what your status is if you say "can't do anything with adb or fastboot commands". I've flashed Zenfones a couple of times (my household has 3 Zenfone 8's on LineageOS) and I had one that went into ramdump. I recovered from that using fastboot to manually reflash all 19 firmware partitions, in both slots. That got the phone out of ramdump, and I got to continue the upgrade to the new LineageOS. So: if you can boot to the fastboot environment, then that would be a road that might leaed you out. But if you can't even get a response to the command "fastboot devices" then I don't know of a course of action for you.
To use fastboot commands I had to run the phone into bootloader mode, then to "recovery" and eventually "fastboot" (I'm note 100% sure but it's what I remembered).
Without that, I was unable to use any fastboot commands like device or flash.
And now the issue is that I'm not able to go to recovery/fastboot again, because I have just the ASUS logo and nothing else.
It looks like that the stock recovery was dead, but I don't know why - and I don't know how to fix/reset it.
From the bootloader you should be able to flash the raw image again, it should flash everything
Adaoh said:
From the bootloader you should be able to flash the raw image again, it should flash everything
Click to expand...
Click to collapse
Good to know - but with which commands/tools?
As I said, I was unable to use fastboot commands from my computer on the Zenfone bootloader.
On the bootloader page, I just have "waiting for devices" and noting else. I had to go into the recovery > fastboot to make the commands work.
semurel said:
Good to know - but with which commands/tools?
As I said, I was unable to use fastboot commands from my computer on the Zenfone bootloader.
On the bootloader page, I just have "waiting for devices" and noting else. I had to go into the recovery > fastboot to make the commands work.
Click to expand...
Click to collapse
On Linux and maybe macs too you need to run fastboot commands as Root (sudo fastboot devices) for example. The raw image script should ask you for your Root password for this reason
Yes I know - I well used sudo for all commands.
The ASUS script asks me for password but then does absolutely nothing - not even a print. I waited a few minutes and finally canceled.
For you, fastboot commands should work on the bootloader screen? (I ask that because the script starts by a fastboot command).
semurel said:
Yes I know - I well used sudo for all commands.
The ASUS script asks me for password but then does absolutely nothing - not even a print. I waited a few minutes and finally canceled.
For you, fastboot commands should work on the bootloader screen? (I ask that because the script starts by a fastboot command).
Click to expand...
Click to collapse
Yes, they work from the bootloader, I always run the script from the BL too. Ironically, I had issues running fastboot commands from fastbootd for installing Omnirom, so I did it all in the bootloader and all worked fine.
I am not sure I can help you more at this point, it looks like it maybe got interrupted mid flashing and now something is wrong somewhere. Maybe if you look inside the bash script file you can find the command that it got stuck on and run that manually if you manage to get fastboot command access.
Strange - they have never worked from the bootloader. I tried that before according to the LineageOS wiki. I thought it was a mistake and use the recovery > fastboot to do that. I dont like that - I hope it's not a local version of the Zenfone or something like that.
I'm not at home tonight but yes I'll try to find commands not requiering the fastboot command.
Unfortunately all commands from the script are using fastboot. And as "fastboot devices" sees nothing, I can't do anything.
I've tried from the bootloader screen (with start, recovery, poweroff option) - from the start screen showing unlocked bootloader warning and from the ASUS logo when I try to start the recovery. I've tried the commands/scripts with Linux and Windows: same result.
So :
- I can't use any fastboot commands.
- I don't have the ASUS recovery.
Speaking of the ASUS recovery, I've found screenshots on internet and they don't have a "fastboot" submenu (I'm not sure it's a Zenfone 8). May had I a different version?
I don't like that. If I don't have others option, I guess that the warranty doesn't work because the phone is unlocked?
I eventually found a solution! I've tried with my old OnePlus cable and fastboot commands start working from the bootloader screen.
I have no idea why my other cable was faulty (it can charge the phone and executes commands from the Recovery > Fastboot menu - but not on the BL screen).
Anyway my problem is now fixed.
Thanks all for help and support.