hello ! i have a problem, im using stock rom ( last ARO update ) + cocore 8.6 and my auto-rotate system dosnt work fine. When the mobile its upright the system/android/ i dont know show me thas its horizontal, and when the mobile its upright but the other way show me fine.
someone understand me ?
Thanks !
NOTE: I calibrated the giryosp yesterday ( setting - move )
maurit43 said:
hello ! i have a problem, im using stock rom ( last ARO update ) + cocore 8.6 and my auto-rotate system dosnt work fine. When the mobile its upright the system/android/ i dont know show me thas its horizontal, and when the mobile its upright but the other way show me fine.
someone understand me ?
Thanks !
NOTE: I calibrated the giryosp yesterday ( setting - move )
Click to expand...
Click to collapse
try to reflash the rom or factory reset the phone
really ?! thanks !
Well i flashed again this rom ( aro new) and the problem still, its weird, i had never had this problem
maurit43 said:
Well i flashed again this rom ( aro new) and the problem still, its weird, i had never had this problem
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2743050
I think that you need to go back to GB to recalibrate it.
thanks ! but really i so scared because sometime read that people who wanted go back to GB break their phone :/
maurit43 said:
really ?! f********kkkkk ! =,= thanks !
Click to expand...
Click to collapse
Hey! Saying bad words in a public place is a disrespect for others. Delete that word or hide letters, otherwise I will report your post.
For your problem, try what @shut_down suggested.
Try this:
You need to be rooted.
1. Install Terminal Emulator app.
2. Run this :
su
cd sys/class/sensors/accelerometer_sensor/
echo 1 > calibration
(!!!!! before runing the last command, phone must be with face up, on a leveled surface )
Hit "Enter" after each command line
Source: http://www.usoftphone.com/t174667.html
Well, i can fix this problem. I flashed CyanogenMod 10.2 and i went " s advance setting.apk" and i calibred .
Thanks so much everyone !!
Related
Hi Experts,
I have just flashed my ACE with the Droid ACE v2 , from the thread "[ROM] [Update 18.08.2012] [Faster Than Ever] Droid ACE v2 Bugs fixed[FireKernel OC] and it is Awesome...Performance and battery life is Extremely well. However, I have some issues with it...and hope you guys can help me on this (I can't post the question inthe original thread yet...sorry abt that)
My issue is, I can't get the call to "Ring" its always in Silent mode, and always vibrate. I have tried couples of way, like set in the profile, differnt Ring Tone but it just still vibrate. Is anyone here can share with me where is the correct way to set it ? Appreciate it .
Thanks !!
cht5 said:
Hi Experts,
I have just flashed my ACE with the Droid ACE v2 , from the thread "[ROM] [Update 18.08.2012] [Faster Than Ever] Droid ACE v2 Bugs fixed[FireKernel OC] and it is Awesome...Performance and battery life is Extremely well. However, I have some issues with it...and hope you guys can help me on this (I can't post the question inthe original thread yet...sorry abt that)
My issue is, I can't get the call to "Ring" its always in Silent mode, and always vibrate. I have tried couples of way, like set in the profile, differnt Ring Tone but it just still vibrate. Is anyone here can share with me where is the correct way to set it ? Appreciate it .
Thanks !!
Click to expand...
Click to collapse
Try setting your volume higher?
Sent from my GT-S5830 using xda premium
Profiles?
did you wiped before flashing?
SMillerNL said:
Try setting your volume higher?
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Yeap .. Did that ..
Neo-Mike said:
Profiles?
Click to expand...
Click to collapse
I did set the profile with correct setting . i think :crying:
incredible.Zimbo said:
did you wiped before flashing?
Click to expand...
Click to collapse
Yeap .. did that !!! :crying:
cht5 said:
Yeap .. Did that ..
I did set the profile with correct setting . i think :crying:
Yeap .. did that !!! :crying:
Click to expand...
Click to collapse
i also have a problem with my 3g,H,. i dont have them since i flashed my cooper with this rom.. or any cm7 roms? how to fix this?
shakk05 said:
i also have a problem with my 3g,H,. i dont have them since i flashed my cooper with this rom.. or any cm7 roms? how to fix this?
Click to expand...
Click to collapse
check the System Volume (It's like the master volume) there is a feature for this in Android Asistant.
hope it works
shakk05 said:
i also have a problem with my 3g,H,. i dont have them since i flashed my cooper with this rom.. or any cm7 roms? how to fix this?
Click to expand...
Click to collapse
I dun have this problem, in fact it auto turn it ON when finished flashed ..
Darkcloud4491 said:
check the System Volume (It's like the master volume) there is a feature for this in Android Asistant.
hope it works
Click to expand...
Click to collapse
Yeah .. checked .. ..
Anyway .. I did a re-flashed again .. yesterday .. and now it WORKED ...:silly: .. and now .. I have new problem . I slot in an 32GB micro SD and use CWM to partition it (2GB) ..then ..now my SD card only left 30 GB.. is there anywhere that I can checked if that 2GB already being used for anything in my phone ?
Thanks !!
Hi,
One thing you should always try is reflashing the rom after turning completely off the phone. Most of the problems related to features missing are related with problems flashing or data left on the device and sometimes (do not know why) when just rebooting the phone partitions are left mounted.
Warper
---------- Post added at 02:14 PM ---------- Previous post was at 02:02 PM ----------
cht5 said:
and now .. I have new problem . I slot in an 32GB micro SD and use CWM to partition it (2GB) ..then ..now my SD card only left 30 GB.. is there anywhere that I can checked if that 2GB already being used for anything in my phone ?
Thanks !!
Click to expand...
Click to collapse
The idea of making a partition from CWM is to prepare the SD to use one of the memory extender scripts and that will not be usable from the normal environment.
Depends on the script to show the total amount of memory on the place where you can see the total memory left on the system.
hi guys ..
i have 2 issues in CM 10 ..
gps not work !!
i try it but still can not locate my location
(using sygic )
+
i cant record videos ..
when i change comera mod from photo to video there is Message say :
((unfortunately . the process com.android.gallery3d has stopped . ))
+
can i add (kill all) button in recent apps ??
heelp plzz
edit :
i fix video recording ..
abduallah77 said:
hi guys ..
i have 2 issues in CM 10 ..
gps not work !!
i try it but still can not locate my location
(using sygic )
+
i cant record videos ..
when i change comera mod from photo to video there is Message say :
((unfortunately . the process com.android.gallery3d has stopped . ))
+
can i add (kill all) button in recent apps ??
heelp plzz
Click to expand...
Click to collapse
Something must went wrong while flashing. Try again.
I have cm10, but for I9000B, and everything is working fine, but since it is different from I9000, I don't know.
Try to reflash it, see if it works
Zkaar said:
Something must went wrong while flashing. Try again.
I have cm10, but for I9000B, and everything is working fine, but since it is different from I9000, I don't know.
Try to reflash it, see if it works
Click to expand...
Click to collapse
video problem becouse iam using bigmem in kernal (390):silly:
i fix video record problem by change kernal ..
now how i can fix GPS ?
any heelp
Fasterfix app - set server
Run GPS status
And Wait...
I have cm10 and use this app
abduallah77 said:
video problem becouse iam using bigmem in kernal (390):silly:
Click to expand...
Click to collapse
Hmm I can still record HD with 390 ram.
Sent from my GT-I9000 using xda premium
Hello guys ,
i've just installed the new build , but i got lag and blue screen i've read that its because of overcloaking (wrong cpu freq)
so can you please show me how to fix this ?
ill be grateful
thank you :good:
is everything ok with you?
yes bro , but i cant use my phone at all , when turn it on i use it for 1 mn then blue screen and auto reboot.
that's what happens when you don't read
tell me please
DELETED :good:
http://forum.xda-developers.com/showthread.php?t=2339439
[Q/A][DISCUSSION] CyanogenMod 10.x/11
Sent from my GT-S6500D using xda app-developers app
DELETED
BIZBilel said:
Hello guys ,
i've just installed the new build , but i got lag and blue screen i've read that its because of overcloaking (wrong cpu freq)
so can you please show me how to fix this ?
ill be grateful
thank you :good:
Click to expand...
Click to collapse
With the phone open unable to change the processor frequency, then you must do to wipe data/factory reset .
I have just installed a new ROM in my Milestone for first time and used CyanogenMod 9.1.0d
Everything looks amazing but I noticed my soft home button doesn't work AT ALL, camera button isn't working either, I cant see the lock screen as other versions, can't open Google Play app and can't synchronize my Google account so I don't have access to my phone contacts
Have someone else happened (and fixed) this problems??
Thanx
Did you flash GApps?
??
57r4n63 said:
I have just installed a new ROM in my Milestone for first time and used CyanogenMod 9.1.0d
Everything looks amazing but I noticed my soft home button doesn't work AT ALL, camera button isn't working either, I cant see the lock screen as other versions, can't open Google Play app and can't synchronize my Google account so I don't have access to my phone contacts
Have someone else happened (and fixed) this problems??
Thanx
Click to expand...
Click to collapse
did the buttons work on stock ??
never seen
never heard
i had every possible rom for this device (910d right now) and never had button problems
did you follow http://www.mrmuh.com/2012/01/update-a-motorola-milestone-from-motorola-firmware-to-cyanogenmod-7/ ?
if not use this guide replace cm7 with cm9.1.0d
100% working
I fixed the problem already but forgot to erase this trend... the problem was after wipe I installed CM9 and Gapps together and got that problem... after wiping all again I installed CM9 rebooted and installed Gapps and worked fine.
Still have no idea what that bug ever happened but i fixed :laugh:
But I changed CM9 to CM7 cause my battery was dropping from 100 to 0 in 4 hours, not good if I'm too much time out of home. Thanks anyway for your interest
IGGYVIP said:
did you follow "update-a-motorola-milestone-from-motorola-firmware-to-cyanogenmod-7" ?
Click to expand...
Click to collapse
Hello, @IGGYVIP I'm having problems with my A853 again, installed the CM7 as always but now i can't get through the MOTOROLA logo... can't make the phone to wake up, and I was looking for the tutorial you mentioned (same I used before) but seems MrMuh's webside is out.
by any case, do you have that tutorial? I wanna start from the ground and reinstall the 2ndboot and the CM7 ... or maybe you have a better solution
thanks anyway
greetings,
No problem
57r4n63 said:
Hello, @IGGYVIP I'm having problems with my A853 again, installed the CM7 as always but now i can't get through the MOTOROLA logo... can't make the phone to wake up, and I was looking for the tutorial you mentioned (same I used before) but seems MrMuh's webside is out.
by any case, do you have that tutorial? I wanna start from the ground and reinstall the 2ndboot and the CM7 ... or maybe you have a better solution
thanks anyway
greetings,
Click to expand...
Click to collapse
first http://forum.xda-developers.com/showthread.php?t=696845
then http://forum.xda-developers.com/showthread.php?t=983516* in this thread there is all you ever need to know
sbf files found here : http://sbf.droid-developers.org/phone.php?device=30
IGGYVIP said:
first http://forum.xda-developers.com/showthread.php?t=696845
then http://forum.xda-developers.com/showthread.php?t=983516* in this thread there is all you ever need to know
sbf files found here : http://sbf.droid-developers.org/phone.php?device=30
Click to expand...
Click to collapse
Dunno if I should thank you or kiss you... lol
thanks for the help!!!
57r4n63 said:
Dunno if I should thank you or kiss you... lol
thanks for the help!!!
Click to expand...
Click to collapse
no problem
Q&A for [ROM] [ICS] [9/2014] Mystery V330-C [beautiful UI] [BEST for daily using]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Problems with youtube
Please I need help =( I've installed youtube from market, but when I try to play video, it says me "Error, tap to try play this video again"
Please help me......
Destinydenis said:
Please I need help =( I've installed youtube from market, but when I try to play video, it says me "Error, tap to try play this video again"
Please help me......
Click to expand...
Click to collapse
You should use a special versoin of youtube , i dont have it ...
If someone have it , please share it ...
Destinydenis said:
Please I need help =( I've installed youtube from market, but when I try to play video, it says me "Error, tap to try play this video again"
Please help me......
Click to expand...
Click to collapse
Try this YouTube https://www.dropbox.com/s/z24wzd30k5n8xg3/YT_4.4.11_v5b_inverted.apk?dl=0
thanks a lot!!!
it,s one of the best till now.
its amazing..
till now no issues with this rom..
all the best for your university!!!!!!
Thx to you very much. Its really sad that on 4.0.4 youtube don't work "from the box: of Play Market. =(( On 2.3 all worked well.
I recommend install kernel that I share it here
Click to expand...
Click to collapse
Where I can find kernel ?
I have problem with SD card, it is removed from the phone.
If i change kernel , it will solve the problem?
michahal said:
Where I can find kernel ?
I have problem with SD card, it is removed from the phone.
If i change kernel , it will solve the problem?
Click to expand...
Click to collapse
The kernel is , IZS v0.4 its on first post of mystery v320-c ...
We dont have sd card problem so far ...
Are you sure your sd card dont have any problems ?
---------- Post added at 09:28 AM ---------- Previous post was at 09:23 AM ----------
michahal said:
Where I can find kernel ?
I have problem with SD card, it is removed from the phone.
If i change kernel , it will solve the problem?
Click to expand...
Click to collapse
The kernel is , IZS v0.4 its on first post of mystery v320-c ...
We dont have sd card problem so far ...
Are you sure your sd card dont have any problems ?
Question by firmware
hi) I am interested in is in the firmware Ukrainian language and it can be something to add?
Mystery V330-C [beautiful UI] [BEST for daily using]
This is actually a good ROM and very fast one
I just want to ask, are you gonna fix the battery percentage issue? it does not change and I can't get to view the percentage number
is this fixed by installing the kernel you shared at the main thread? if so, how do I flash it? do I flash it before flashing the ROM or after? what If I already flashed the ROM like now, do I have to flash the kernel and then reflash the ROM as a full clean flashing? also how can I change the Arabic Font into a default one used by official ROMs or like any other default Arabic font used by customized ROMs?
I'm also considering changing the icons,
other than that everything works great
Edit: I managed to change the Arabic font back into a default one by downloading GS45_Arab_AndroidOS.ttf and renaming it to LG_Arabic.ttf and placing it into fonts file and changing he permissions and then rebooting
Edit: this ROM is one of the best out there, the battery thing turned out to be working, I just bought a 3500 mAh battery and it does not drain that fast so I thought it was a bug lol, the only thing is that the percentage number does not show and can't be enabled from the settings which is not a big deal.
the ROM is fast and smooth, really nice work, I installed Holo Launcher , better theme for me, makes it look more genuine Android
Really nice work and thank you for your efforts, I will stick with this one for a long time, thumbs up
fitted said:
This is actually a good ROM and very fast one
I just want to ask, are you gonna fix the battery percentage issue? it does not change and I can't get to view the percentage number
is this fixed by installing the kernel you shared at the main thread? if so, how do I flash it? do I flash it before flashing the ROM or after? what If I already flashed the ROM like now, do I have to flash the kernel and then reflash the ROM as a full clean flashing? also how can I change the Arabic Font into a default one used by official ROMs or like any other default Arabic font used by customized ROMs?
I'm also considering changing the icons,
other than that everything works great
Edit: I managed to change the Arabic font back into a default one by downloading GS45_Arab_AndroidOS.ttf and renaming it to LG_Arabic.ttf and placing it into fonts file and changing he permissions and then rebooting
Edit: this ROM is one of the best out there, the battery thing turned out to be working, I just bought a 3500 mAh battery and it does not drain that fast so I thought it was a bug lol, the only thing is that the percentage number does not show and can't be enabled from the settings which is not a big deal.
the ROM is fast and smooth, really nice work, I installed Holo Launcher , better theme for me, makes it look more genuine Android
Really nice work and thank you for your efforts, I will stick with this one for a long time, thumbs up
Click to expand...
Click to collapse
Im really happy you like it ...
So , you think the only bug is battry precentage ?!
Battery percentage is work but not battrey level ( that's because of my system ui changes ) ...
I think its not important and i really dont have any time to fix it ( its easy to fix it but need time ) ...
Sent from my iPhone using Tapatalk
can't mount SD card if change cwm T__T
Fblackid said:
can't mount SD card if change cwm T__T
Click to expand...
Click to collapse
Its a bug of cwm 6.0.1.4 , its dont work ...
Sent from my iPhone using Tapatalk
Mystery-M said:
Its a bug of cwm 6.0.1.4 , its dont work ...
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
then can't flash kernel to 0.4 ? T__T
Fblackid said:
then can't flash kernel to 0.4 ? T__T
Click to expand...
Click to collapse
Copy it to your sd card before go to recovery ...
Whats your problem ?
Sent from my iPhone using Tapatalk
Mystery-M said:
Copy it to your sd card before go to recovery ...
Whats your problem ?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
in your post, u post if want to flash kernel to 0.4 change cwm into 6.0.1.4 if not it will bootloop...
i change cwm into 6.0.1.4 and the kernel in sd card. but can't mount the sd card in cwm 6.0.1.4. :crying: :crying:
Fblackid said:
in your post, u post if want to flash kernel to 0.4 change cwm into 6.0.1.4 if not it will bootloop...
i change cwm into 6.0.1.4 and the kernel in sd card. but can't mount the sd card in cwm 6.0.1.4. :crying: :crying:
Click to expand...
Click to collapse
What do you mean ?!
You can instal it with out problem , you just cant use usb storage ...
If you need it you could use a card reader ...
Sent from my iPhone using Tapatalk
Mystery-M said:
What do you mean ?!
You can instal it with out problem , you just cant use usb storage ...
If you need it you could use a card reader ...
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
look at this... http://forum.xda-developers.com/showpost.php?p=55953488&postcount=43
Fblackid said:
look at this... http://forum.xda-developers.com/showpost.php?p=55953488&postcount=43
Click to expand...
Click to collapse
I know ...
but dont understand you problem , you have cwm 6.0.1.4 and kernel so flash it , whats your problem ?!
Mystery-M said:
I know ...
but dont understand you problem , you have cwm 6.0.1.4 and kernel so flash it , whats your problem ?!
Click to expand...
Click to collapse
can't mount SD card if i flash cwm 6.0.1.4. how to i flash kernel if i change cwm to 6.0.1.4 cant mount the SD card ?