Database Develop

[Q] Required complete guide for root/bootloader/cwm installation

Hi,
i have searched around but couldn't find a complete guide to install cwm, update boot-loader before installing any custom rom on LG SU-660. Can someone guide me?
My current BB:1035.21_20111120
Software version:LG-SU660-V20j

monemhamid said:
Hi,
i have searched around but couldn't find a complete guide to install cwm, update boot-loader before installing any custom rom on LG SU-660. Can someone guide me?
My current BB:1035.21_20111120
Software version:LG-SU660-V20j
Click to expand...
Click to collapse
Maybe this can help you out:
djtreo said:
here's what I did (thanks to those fellows who helped me) From stock ICS going to JB (with the old bootloader)
1. re-flash your phone using smartflash cleaner: http://forum.xda-developers.com/show....php?t=1987772 (backup first)
2. If flashing successful, you're into the Gingerbread bootloader. Power ON your phone, in CWM recovery, go to Mount USB, connect phone to PC using usb cable. It'll ask you to format, just press Yes. Internal storage will be formatted.
3. Download ROM (Raum's CM10.1): http://d-h.st/O6P -> this is what I called my base install...after download, rename it to cm-10-20130106-NIGHTLY-p990.zip
4. Download the file here: http://code.google.com/p/openstar2x/...=label:SU660 -> look for the 15A version.
5. Unzip the file 15a. Copy cm-10-20130106-NIGHTLY-p990.zip into 15a folder. Run fixall.bat. If ask what kernel, select option 4. If ask change wireless.ko, type Y. wait until finished. (Y because I got issues with wifi, bluetooth and calls with the stock wireless.ko)
6. Reboot your phone. Back to CWM recovery, again, go to Mount USB, copy cm-10-20130106-NIGHTLY-p990.zip in which it was converted to cm-10-20130106-NIGHTLY-su660-fixed.zip to your internal storage. After copy, install zip file from internal storage, select cm-10-20130106-NIGHTLY-su660-fixed.zip.
7. Should work flawlessly. After that, you can download official CM10.1 nightly, just rename it (same as step 3). You can also download custom kernel for CM10.1 here: http://upfile.vn/4J7n ...flash it after flashing the rom.
8. Enjoy!
hope this helps
Click to expand...
Click to collapse

[SOLVED] Rooting the OTA updated UVMA1 build

See several posts below for the steps that worked for me
I'm posting this here because my post in the Q&A forums has received zero replies.
I feel like I've tried everything. I installed the UVMA1 over-the-air update and have lost and am unable to regain root. I seriously need a solution to this.
Has anyone been able to root the most updated SGH-T879 with the UVMA1 build?

Re: [Q] Rooting the OTA updated UVMA1 build
You have to do following steps
1.download CWM recovery. tar
2.download odin flashable CWM touch recovery.tar
3.go to download mode
4.flash the UVAM1.tar file through odin
5.flash the CWM recovery.tar through odin
6.flash the CWM touch recovery.tar through odin
7.go to recovery mode flash the super user
8.reboot
You should be okay...
I hope that it helping you to Root the phone.
Let me know if you did.
Good luck..
Sent from my SGH-T879 using xda premium

Flash the CWM recovery tar through Odin.
https://www.onlinefilefolder.com/3sYujqhSWDjt5I
After CWM has been installed, flash superusers through recovery.
https://www.onlinefilefolder.com/3sRc8Cz8TcpOLC
To change recovery to TWRP (which most people seem to prefer now days) flash TWRP zip through CWM recovery. I like this method better than trying to install TWRP through Goomanager, I always have trouble with that for some reason.
Paste below address into your browser
goo.im/devs/OpenRecovery/sgh-t879/openrecovery-twrp-2.3.1.1-sgh-879.zip
Now your phone is rooted and you have TWRP.

Re: [Q] Rooting the OTA updated UVMA1 build
I did as same as it.
But. I couldn't go to recovery
That is why important that make it sure flashing CWM touch recovery.tar through odin.
Maybe just my phone?.
Thank you.
Sent from my SGH-T879 using xda premium

I got my phone to root, but have been unable to change the recovery so I can switch to 4.2.2.

I will clean this up as time permits.
Success!
Through trial and error, on Ubuntu and Windows, I have managed to successfully root the UVMA1 build. I did not screenshot the process so I'll be going from memory. On the other hand I will post a stock backup of the ROM for everyone to use as needed.
This did not work on Ubuntu, had to use Windows.
You will need:
Android Tools SDK
CWM
most recent ODIN
Superuser zip
Steps:
download Android Tools SDK.
Extract to your C: on your windows machine
Open command prompt and navigate to the Platform-Tools directory
enable debugging mode on your Note (Settings > Developer Options > USB Debugging
Leaving your phone on, connect via USB to your computer
wait while the Samsung drivers load
On command prompt type "adb reboot-bootloader" or "adb reboot bootloader" and wait (might need to try both)
Your phone should reboot into downloader mode
Open the newest version of ODIN
In Odin, nothing significant will change, I only saw a blue box in the first square top left
Click on 'Bootloader' button and select the tar.md5 file from Tomin's Goodies thread (link to come later)
In Odin, click on Start
Odin will scroll some text in the little window (bottom left) and then stop. I waited about five minutes. Nothing changed.
Disconnect your phone, pull the battery, press the power button (to dissipate magic electrons), put the battery back in and turn the phone on
Your phone should show a screen saying there is an issue with the Firmware and to use Samsung Kies to fix it. IGNORE THIS, don't do anything
Reconnect phone to PC via USB
wait about 30 seconds for the computer
In Odin, press Start again.
Odin should do something differently than the first time, you should see the top left window go green and 'Reset Ok' in the bottom left window.
Your phone will reboot. If it loads to Android then go to the command prompt window on your PC and type 'adb reboot recovery'
wait about a minute. CWM should load on your phone.
Now is the time to install Superuser zip through CWM.
Additionally, clear dalvik and other caches, reset permissions and backup your rom to external SD card now.
If anyone tries this, please document the process with screenshots so we can create a more comprehensive tutorial.

How to Root Android 5.0 (LRX21O) for Nexus 5

Hey guys,
So i'm sure this is probably already out there, but I wanted to give everyone my method of success with rooting the latest version on Android (5.0) on our N5. Here it is:
Prereqs: You'll need to have these downloaded first
TWRP - Download to your Computer
http://techerrata.com/file/twrp2/hammerhead/openrecovery-twrp-2.8.0.1-hammerhead.img
SuperUser v2.19 - Download to your Phone
http://click.xda-developers.com/api...ainfire.eu/593/SuperSU/BETA-SuperSU-v2.19.zip
Platform Tools - Download to your Computer
https://www.androidfilehost.com/?fid=9390355257214632011
Steps
1) Download SuperUser v2.19 to your phone.
2) Turn off your phone, and reboot into the BootLoader by holding Power + Vol (-). Wait until you see the Green Android Robot.
3) Plug your phone via Micro USB to your Computer.
4) Download and Extract Platform Tools in a "New Folder" on your C: Drive. Give the folder an easy name such as "N5" or something similiar
5) Download and Extract the TWRP recovery image to the "New Folder". Rename the "openrecovery-twrp-2.8.0.1-hammerhead.img" to "Recovery". NOTE: It may ask you to overwrite the exisiting recovery image (if applicable). Select Ok/Yes
6) Open your Command Prompt (Windows) and type the following: (You can copy and paste if you'd like)
* cd..\..
* cd c:\(Your New Folder)
* fastboot flash recovery recovery.img
6) Let TWRP flash to your phone (Should take no more than ~10 secs).
7) Toggle your phone to "Recovery" by using the Voume Up/Down keys. Press the Power button to select/confirm.
8) Once TWRP has loaded, press the "Install" icon, followed by "Zip File", and proceed to the "Downloads" folder that you have the SuperUser v2.19 zip downloaded.
9) Select the zip and confirm by swiping at the bottom.
10) Reboot back to the "System"
11) Done
_______________________________________________________________________________
I tried to be as clear as I could with this write up, so I hope this makes sense. It really is straight forward.
Although I'm definitely not the one who came up with this method or files, I wanted to share what worked best for me to Root my N5 running the 5.0 OTA.
If this helped you get root back or makes sense, give a "Thanks".
Take it easy...

Thank you for posting this. I tried three other methods to get root back before this, and none of them worked. This one did the trick without any problems at all. Thanks again!

Wug's Nexus Root Toolkit 1.9.4

kyoshiro22 said:
Wug's Nexus Root Toolkit 1.9.4
Click to expand...
Click to collapse
I know there's Toolkit's out there, but this is for those who choose to take the "Fastboot" approach.

gestevez1213 said:
Hey guys,
So i'm sure this is probably already out there, but I wanted to give everyone my method of success with rooting the latest version on Android (5.0) on our N5. Here it is:
Prereqs: You'll need to have these downloaded first
TWRP[ - Download to your Computer
http://techerrata.com/file/twrp2/hammerhead/openrecovery-twrp-2.8.0.1-hammerhead.img
SuperUser v2.19 - Download to your Phone
http://click.xda-developers.com/api...ainfire.eu/593/SuperSU/BETA-SuperSU-v2.19.zip
Platform Tools - Download to your Computer
https://www.androidfilehost.com/?fid=9390355257214632011
Steps
1) Download SuperUser v2.19 to your phone.
2) Turn off your phone, and reboot into the BootLoader by holding Power + Vol (-). Wait until you see the Green Android Robot.
3) Plug your phone via Micro USB to your Computer.
4) Download and Extract Platform Tools in a "New Folder" on your C: Drive. Give the folder an easy name such as "N5" or something similiar
5) Download and Extract the TWRP recovery image to the "New Folder". Rename the "openrecovery-twrp-2.8.0.1-hammerhead.img" to "Recovery". NOTE: It may ask you to overwrite the exisiting recovery image (if applicable). Select Ok/Yes
6) Open your Command Prompt (Windows) and type the following: (You can copy and paste if you'd like)
* cd..\..
* cd c:\(Your New Folder)
* fastboot flash recovery recovery.img
6) Let TWRP flash to your phone (Should take no more than ~10 secs).
7) Toggle your phone to "Recovery" by using the Voume Up/Down keys. Press the Power button to select/confirm.
8) Once TWRP has loaded, press the "Install" icon, followed by "Zip File", and proceed to the "Downloads" folder that you have the SuperUser v2.19 zip downloaded.
9) Select the zip and confirm by swiping at the bottom.
10) Reboot back to the "System"
11) Done
I tried to be as clear as I could with this write up, so I hope this makes sense. It really is straight forward.
Although I'm definitely not the one who came up with this method or files, I wanted to share what worked best for me to Root my N5 running the 5.0 OTA.
If this helped you get root back or makes sense, give a "Thanks".
Take it easy...
Click to expand...
Click to collapse
This is NOT working.... I tried it 3 times on 2 devices

papayayoghurt said:
This is NOT working.... I tried it 3 times on 2 devices
Click to expand...
Click to collapse
What part are you stuck at?

For me, I needed to erase cache for the TWRP to stick. Otherwise, when I rebooted it was gone and was using the default recovery.
Use the command:
Code:
fastboot erase cache
before
Code:
fastboot flash recovery recovery.img
if you have the same problem installing TWRP.

I used chainfires auto root for the N5 (stock lollipop Boot loader). Worked great. Just download to a PC put phone into boot loader and run the bat file. I can't link but a quick google will find it for you.
Sent from my Nexus 5 using Tapatalk

andrelessa said:
For me, I needed to erase cache for the TWRP to stick. Otherwise, when I rebooted it was gone and was using the default recovery.
Use the command:
Code:
fastboot erase cache
before
Code:
fastboot flash recovery recovery.img
if you have the same problem installing TWRP.
Click to expand...
Click to collapse
Good find. Didn't happen to me, but i'm sure it may to others. Were you all set afterwards with Root?

Personally, I'm using the autoroot from chainfire. Works like a charm, no custom recovery is needed (I have the stock recovery).

gestevez1213 said:
What part are you stuck at?
Click to expand...
Click to collapse
Everything is working, but then SuperSU can´t find a Binary.

gestevez1213 said:
Good find. Didn't happen to me, but i'm sure it may to others. Were you all set afterwards with Root?
Click to expand...
Click to collapse
Yes, I read somewhere that TWRP need this...

papayayoghurt said:
Everything is working, but then SuperSU can´t find a Binary.
Click to expand...
Click to collapse
Are you running the official lollipop release? It should work with that. Delete the app, and try again.

Just put your phone in bootloader and run cf-autoroot from windows if you dont want twrp.

I have twrp but its not working like that

papayayoghurt said:
Everything is working, but then SuperSU can´t find a Binary.
Click to expand...
Click to collapse
Had the same issue and needed to flash the updated kernel from chainfire : https://www.androidfilehost.com/?fid=95747613655047375

Why are you trying to do this the hard way? Just use chainfire's autoroot.
It works perfect and it's literally one command
fastboot boot CHautoroot.img (or whatever the file name is)

cf-auto-root is the way
I agree, just use cf-auto-root. You should be good to go in no time.
Just for FYI, if you already have unlocked bootloader, it won't wipe your data, if you are concerned.
CF-auto-root roots N5 without modifying your kernel. I believe, if you flash the SuperSU in TWRP, it would modify the kernel. It's nothing bad, but if you want to remain "stock" and don't want to reflash stock ROM later to get the OTA, just use "Full unroot" from SuperSU app and you are stock and ready for next OTA.

I have encrypted the storage on my Nexus 5. Will CF-Auto-Root wipe my storage?

papayayoghurt said:
Everything is working, but then SuperSU can´t find a Binary.
Click to expand...
Click to collapse
I have the same error.

Root Zenfone 4 . ANDROID LOLLIPOP

Download:
1. Intel USB Driver ( HERE )
2. CWM ( HERE )
3. SuperSU ( HERE )
Instruction
1. Download file and install intel USB Driver ( If you don't have it )
2. Extract CWM
3. Copy SuperSU to SDCard
4. Turn off Zenfone 4
5. Go to Droidboot ( Power + Volume Up + Volume Down )
6. Connect Zenfone 4 to PC
7. In CWM folder open CMD.CMD ( Shift+right Click --> Open Command )
8. Type fastboot flash update update.zip
9. Choose update from SDCard
10. Choose SuperSU and YES .... Wait until finish
11. Reboot and ROOTED

JustinSang said:
Download:
1. Intel USB Driver ( HERE )
2. CWM ( HERE )
3. SuperSU ( HERE )
Instruction
1. Download file and install intel USB Driver ( If you don't have it )
2. Extract CWM
3. Copy SuperSU to SDCard
4. Turn off Zenfone 4
5. Go to Droidboot ( Power + Volume Up + Volume Down )
6. Connect Zenfone 4 to PC
7. In CWM folder open CMD.CMD ( Shift+right Click --> Open Command )
8. Type fastboot flash update update.zip
9. Choose update from SDCard
10. Choose SuperSU and YES .... Wait until finish
11. Reboot and ROOTED
Click to expand...
Click to collapse
Does not works
But I tried Temporary CWM Session for Intel Device method and it worked fine with T2 option

arun483 said:
Does not works
But I tried Temporary CWM Session for Intel Device method and it worked fine with T2 option
Click to expand...
Click to collapse
Can you explain your method?

Subhajitdas298 said:
Can you explain your method?
Click to expand...
Click to collapse
It's 3 years old post, I don't even own the device anymore ??

arun483 said:
It's 3 years old post, I don't even own the device anymore
Click to expand...
Click to collapse
Need the method. Can you find it? It would be great help.

Subhajitdas298 said:
Need the method. Can you find it? It would be great help.
Click to expand...
Click to collapse
Ok so the method was to unlock bootloader, flash twrp and flash magisk zip.
The other way was using temporary cwm for intel devices using T2 option. What this does is that it gives you a temporary CWM session which can be used to flash magisk zip.
Edit: You can find most of the resources here https://forum.xda-developers.com/ze...12-1-cyanogenmod-12-1-asus-zenfone-4-t3249637

arun483 said:
Ok so the method was to unlock bootloader, flash twrp and flash magisk zip.
The other way was using temporary cwm for intel devices using T2 option. What this does is that it gives you a temporary CWM session which can be used to flash magisk zip.
Edit: You can find most of the resources here https://forum.xda-developers.com/ze...12-1-cyanogenmod-12-1-asus-zenfone-4-t3249637
Click to expand...
Click to collapse
Can you give exact files?
I need the proper recovery file.
Thanks in advance.

Subhajitdas298 said:
Can you give exact files?
I need the proper recovery file.
Thanks in advance.
Click to expand...
Click to collapse
The link I mentioned has the proper resources including bootloader unlocker and TWRP recovery img
Edit: Full Method
1. Download bootloader unlocker from http://dlcdnet.asus.com/pub/ASUS/ZenFone/A400CG/Unlock_Tool_A400CG.zip
2. Extract Unlock Bootloader Tool > Install apk> Unlock
3. Install Intel Driver from http://d-h.st/ZN2 and turn on USB Debugging mode.
4. Copy fix-twrp_zf4_recovery.img to adb folder.
ADB can be downloaded from http://d-h.st/ZN2
TWRP can be downloaded from https://drive.google.com/file/d/0B_qQULhmnkV1Y092TGRsekJyVkE/view?usp=drive_web
5. Turn off your Zenfone 4 and boot into Droidboot (Power + Volume Up).
7. Open adb terminal and enter following command
- fastboot flash recovery fix-twrp_zf4_recovery.img
8. Boot into recovery and flash Magisk or SuperSU whichever you prefer.
** I take no responsibility if your device gets bricked. I used this device over 3 years ago and have only fragments of memory of how I rooted it.
** Perform steps given above at your own risk

arun483 said:
The link I mentioned has the proper resources including bootloader unlocker and TWRP recovery img
Edit: Full Method
1. Download bootloader unlocker from http://dlcdnet.asus.com/pub/ASUS/ZenFone/A400CG/Unlock_Tool_A400CG.zip
2. Extract Unlock Bootloader Tool > Install apk> Unlock
3. Install Intel Driver from http://d-h.st/ZN2 and turn on USB Debugging mode.
4. Copy fix-twrp_zf4_recovery.img to adb folder.
ADB can be downloaded from http://d-h.st/ZN2
TWRP can be downloaded from https://drive.google.com/file/d/0B_qQULhmnkV1Y092TGRsekJyVkE/view?usp=drive_web
5. Turn off your Zenfone 4 and boot into Droidboot (Power + Volume Up).
7. Open adb terminal and enter following command
- fastboot flash recovery fix-twrp_zf4_recovery.img
8. Boot into recovery and flash Magisk or SuperSU whichever you prefer.
** I take no responsibility if your device gets bricked. I used this device over 3 years ago and have only fragments of memory of how I rooted it.
** Perform steps given above at your own risk
Click to expand...
Click to collapse
How to boot into recovery?
Also recovery link does not work.

Subhajitdas298 said:
How to boot into recovery?
Also recovery link does not work.
Click to expand...
Click to collapse
Well I'm sorry then I can not help you. Try following this method https://forum.xda-developers.com/android/development/intel-android-devices-root-temp-cwm-t2975096 with T2 option

arun483 said:
Well I'm sorry then I can not help you. Try following this method https://forum.xda-developers.com/android/development/intel-android-devices-root-temp-cwm-t2975096 with T2 option
Click to expand...
Click to collapse
Shortcut for reboot into recovery?
adb reboot recovery is not working.
What is T2 option?

Subhajitdas298 said:
Shortcut for reboot into recovery?
adb reboot recovery is not working.
What is T2 option?
Click to expand...
Click to collapse
Shutdown >> Press Power and Volume Up button together
I think that was the shortcut not sure if it's for bootloader or recovery

arun483 said:
Shutdown >> Press Power and Volume Up button together
I think that was the shortcut not sure if it's for bootloader or recovery
Click to expand...
Click to collapse
No it does not work.
Droidboot is only thing. Shortcut : Vol UP + Power.
Thanks for the temporary recovery method though. Thanks a lot.

[GUIDE] [AiO] [ULTRA NOOB] ULTIMATE GUIDE FOR MAX PRO M1 - BT, CUSTOM ROMS ETC.

* introduction *
Hello,
before you hate me, please let me to say why I wrote this guide- it is for ultra noob guys, beginners or just for organize almost all files for tweaks and fixes for this phone. Because I noticed myself that it was beginning to make a mess with it, so I decited to write this guide which (what I mensioned) contains tweak and fixes to known bugs that are in the software.
Ready? Staddy? GO!
* warning *
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if you point the
* finger at me for messing up your device, I will laugh at you.
*
*/
I. Bootloader unlocking
We will start our journey in a beautiful world modified by android with unlocking the bootloader.
What is it?
Bootloader is something like BIOS from computers but in the phone. It let you to boot many software, like recovery. We can't boot directly into recovery without unlocked bootloader because phone has got some closed startup procedure (like POST test in computers). To break it, we must unlock bootloader.
So how to do that?
We must:
1. Download RAR file and you'll get 2 folders namely unlock and ASUS_Android_USB_drivers_for_Windows
2. Install the drivers according to your OS and go the unlock folder
3. Reboot your phone to fastboot mode by pressing volume up + power on at the same time.
4. Connect it to pc and open unlock.bat in unlock folder
5. Bootloader successfully unlocked.
II. Install TWRP
After unlocking bootloader, we need some recovery to install custom software on our beast.
To do that:
1. Download this TWRP (F2FS support) and place it into unlock folder
2. Reboot into fastboot
3. Connect the phone into PC
4. In unlock folder, run cmd and type "fastboot devices". You should see some device plugged into your PC.
5. Type "fastboot flash recovery XXX.img" when XXX means the name of recovery.
6. When installing process finish, press volume down + power as long as you doesn't see fastboot warning.
7. Phone will get into TWRP.
To get into TWRP just presss volume down + power until you doesn'ts see fastboot warning.
III. Decrypt enrypted data
1. Download the decrypt.zip and copy to SDcard
2. Flash in recovery
3. Format /data
4. Reboot
IV. Flashing custom ROMs
Now the main aim of customization: CUSTOM ROM <3 It let you to do many modifications like style of font in system, theme, newer version of software and many many more.
Just:
1. Copy all your necessary software into SD card
2. Boot your device into TWRP
3. Go to "install", pick firmware which you need and swipe to flash
4. Repeat step 3 with gapps
5. Reboot to system
When you want to install some kernel or NXP or magisk or something else, don't do that after flashing system. Before, flash firmware, system and gapps, reboot and configure. Then go to TWRP and flash 3rd party mods.
V. Unlocking Camera2API
To get GCAM work property, we need to unlock camera2api. If you don't know what's that, go there -> https://www.thegeeksclub.com/camera-2-api-check-smartphone-support/
1. Power off the phone and enter fastboot mode.
2. Fire up fastboot terminal and connect your phone to the pc, enable USB debugging mode from dev. options too.
3. Run the command: fastboot oem enable_camera_hal3 true
4. Type: fastboot reboot
VI. Magisk
Just to get root permissions. If you don't know what it is, go there -> https://www.xda-developers.com/what-is-magisk/
1. Go to TWRP and flash this file
2. Reboot to system
3. Install .apk
VII. Some other useful files
TWRP: https://drive.google.com/open?id=1dhjV0p00AiZ83eF5iUA6o9fdx6zsQYTF
GAPPS: https://opengapps.org
CUSTOMROMS: https://forum.xda-developers.com/asus-zenfone-max-pro-m1/development
FIRMWARES:
339 https://drive.google.com/open?id=1EIRZ1HrJQaOynq48lfhYWaHd9L0fhPU5
Pie https://drive.google.com/open?id=1xwFFadooMD2DJqI9dClcCuojAFwHfdtV
NXP: https://drive.google.com/open?id=1lfRGXlf3q53kLMZDOvLe4jMr3szQPLQd
MAGISK:
.zip https://drive.google.com/open?id=1HrZUdL7ZgVWfuDg7PWOL_DZrwsmNzrRf
.apk https://drive.google.com/open?id=1jFee8Mx0pwCcyE729h33gyfaIfHxNgVI
GCAMS:
Arnova https://drive.google.com/open?id=1R1Sfw0DdKXZxYWDkEvH8ODpWHkUjnkxk
MGC https://drive.google.com/open?id=1YowAmosszfoCJCORjcwE7OQzxOuqY7ql
If you have any observations, remarks - write to me!
Thanks for all XDA community,
~ALYSKY

Reserved

Sir can you plz tell me does this method works on 6gb varient? With firmware version .340
Is this method for XOOT or XOOTD?
My model is XOOTD ....

Dewashish03 said:
Sir can you plz tell me does this method works on 6gb varient? With firmware version .340
Is this method for XOOT or XOOTD?
My model is XOOTD ....
Click to expand...
Click to collapse
I tested it on 4/64 X00TD variant and it worked.

ALYSKY said:
I tested it on 4/64 X00TD variant and it worked.
Click to expand...
Click to collapse
Thax for replay...
Does this twrp can be flashed successful on .340 and pie?
Do we need different versions of twrp to flash on different android version like .239 .240 and pie?

Dewashish03 said:
Thax for replay...
Does this twrp can be flashed successful on .340 and pie?
Do we need different versions of twrp to flash on different android version like .239 .240 and pie?
Click to expand...
Click to collapse
It doesn't matter. You can use the same version of TWRP on different version of firmware.

can this method work on X00TD android pie stock rom. @ALYSKY

unable to install twrp, the drivers are well installed, the bootloader is to unlock I use the original cable usb, I try on several usb port, always the same error message
failed remote requested download size is more than max allowed
my model X00TD
please help me

I have installed twrp recovery and can boot into it but i cant find the magisk or decrypt files to swipe in the recovery. please help

noob858 said:
I have installed twrp recovery and can boot into it but i cant find the magisk or decrypt files to swipe in the recovery. please help
Click to expand...
Click to collapse
U need to put them in your sd card and then you have to select storage (external) and then flash them

lokesh773 said:
U need to put them in your sd card and then you have to select storage (external) and then flash them
Click to expand...
Click to collapse
ok im supernoob at this. nut how do i put it to sd card?? i mean i dont have any sd card inserted.

noob858 said:
ok im supernoob at this. nut how do i put it to sd card?? i mean i dont have any sd card inserted.
Click to expand...
Click to collapse
Use pc to transfer it to sd card....if you dont have sd card you can use pendrive...

Every NKOTB is desperate to post his/her/it's thread / YouTube video for such guide/s, quoting stuff from other's posts / threads and sharing their hard work, without the basic decency to quote and credit the original thread / guy who posted in the first place. Please do so or this thread will be reported for plagiarism.

angixspirit said:
unable to install twrp, the drivers are well installed, the bootloader is to unlock I use the original cable usb, I try on several usb port, always the same error message
failed remote requested download size is more than max allowed
my model X00TD
please help me
Click to expand...
Click to collapse
have you tried to install the driver?

I've updated my phone to latest official pie (.053) . Does these steps still applicable or there is any changes? Please kindly update the guide if there is any changes.

guys i tried to flash recovery but after that.. it does nothing.. i just got blank screen. No TWRP screen
Update 1 : Without TWRP I was able to install Magisk via Manager but after flashing patched image file. I now no longer able to start mobile.. it always gets to recovery screen. somebudy help
Update 2 : I used another boot image and patched it with Magisk and now I am able to boot phone but now it stuck on logo screen
Update 3 : I was using totally differnt boot image .. I extracted it from offical stock rom. Now I booted my phone also did root. Now question is how to install TWRP and dyscript.zip
Update 4 : TWRP or RWRP not working so Now I am not able to decrypt my phone. Help

hi why theres a password in twrp?

ALYSKY said:
* introduction *
1. Download RAR file and you'll get 2 folders namely unlock and ASUS_Android_USB_drivers_for_Windows
2. Install the drivers according to your OS and go the unlock folder
3. Reboot your phone to fastboot mode by pressing volume up + power on at the same time.
4. Connect it to pc and open unlock.bat in unlock folder
5. Bootloader successfully unlocked.
Click to expand...
Click to collapse
Hi,
First of all, thank you for the detailed steps and instructions.
I downloaded the RAR mentioned in the step 1 above. When I click open after downloading, there's an error preventing me to open. I also tried extracting but I'm unable to do so.
Please provide me the updated link or reupload the file so that I can download it,
Thanks.

unlock.bat file is missing is the unlock folder...what to do?

this is showing when trying to istall twrp
what to do?
 @ALYSKY