Just what the title says if you go under storage its says calculating forever and will not go from this also when trying to look under installed apps where is says how much space is being used also still says calculating do any of you have an idea why or even how to fix this? I have an unlocked boot loader running rooted stock 4.4.4
Thanks
I have seen this take a really long time when an app I used created a cache folder that had many many little files. If I waited long enough in my case it eventually did finish. This was on another device which had a notoriously slow internal storage...
Thank you for this info I will look at all the thongs I have and see if this is the case..
muiriddin said:
I have seen this take a really long time when an app I used created a cache folder that had many many little files. If I waited long enough in my case it eventually did finish. This was on another device which had a notoriously slow internal storage...
Click to expand...
Click to collapse
gitit20 said:
Thank you for this info I will look at all the thongs I have and see of this is the case..
Click to expand...
Click to collapse
Here are some for you to look at:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Good old auto-correct.....it's a love-hate relationship
Hahahah holy **** lol that was a good one
Related
Hey,
just wanted to say what's up, I'm new around these parts (though I've been around about 2 weeks just reading up). I recently got a Google Android device (the Mytouch 3G or on these boards it's the Saphire 32B) and I rooted my phone and currently run Cyanogen 4.0.2, I love it. Anyways, I hope to learn a lot from these forums as I cheated and did the 1 click root... I want to revert back to the orginal state and root the long way (gold card) and eventually once I get a bigger higher class SD card have a linux swap for addl memory plus Apps2sd enabled.
Anyways, happy modding everyone!
hello mate, welcome to xda-developers
by the way, we're learning here (...and developing of course)
have a nice day
Welcome
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome!
Read, Search, Respect and Enjoy!
--------------------------------
Nice pic stylez!
Welcome and Happy Flashing!
Thanks for the welcomes... here's to hoping I don't brick my phone.
As long as you follow instructions all should be fine...If not, here we are to help
JackCrackerMan said:
Thanks for the welcomes... here's to hoping I don't brick my phone.
Click to expand...
Click to collapse
Don't wory read read & read again when moddin phone, most bricks are not true bricks, if you can recover which is most cases it's not bricked
Good luck
So I was just browsing through some of the sub-forums and I found a lot of questions asking, "HOW KENN I RUN iPHONE APZ ON MI PPC?"
I today have brought you a solution.
Using this method, your phone/device will not need any additional memory usage, or even any additional software/hardware for that matter. All games will run full speed too! And the best part is -- none of this will affect your battery life!
Here you go folks! A picture is worth a thousand words, so this video is worth a million (Or something like that! )
http://www.youtube.com/v/HA17r26Ytz0&hl=en_US&fs=1
Tada!!
edit: This will work with all screen resolutions!
Does this work on the HTC HD2?
Metta24 said:
Does this work on the HTC HD2?
Click to expand...
Click to collapse
Upon further inspection it works on every phone on every operating system
It's a really hilarious* video showing someone running an app on an iphone which he has physically placed on top of a PPC.
* when I write, hilarious, I really didn't mean it.
Thread can be closed now, if not deleted, please.
It will run on my Tilt, as long as it is on my desk. But will not run on my Tilt if it is in the charging dock. Any ideas ?
fail thread.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello, i'de just like to ask. HOw to instal the QUickpwn program on XP or windows 7. I try to instal it but its always have an error. Quickpwn is the program that can jail;break the ipod touch.
thanks
thats so cool, Im gonna try that.
Hello xda,
Do you hate hd2's original sticking together screen? or are you annoyed seeing that screen daily?
but not anymore. It's time to give your phone a new look. so here I've created a new splashscreen for t-mobile hd2.
Tested on US modal hd2, not sure for european one. but as far as i know, either it works or it gives a error while flashing.
Normally it's safe to do this, and this wont touch the NAND partation so your roms will still be there after you flash this.. But to be 100% sure, always keep a backup.
well, even if i've said its safe, I don't take any guarantee for it. so as always do it at your own risk.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to flash?
- download the zip below
-Put your phone in bootloader mode (vol down + power on)
-connect your phone to PC
- extract the zip you've downloaded and run the ROMUpdateUtility.exe.
-wait 30 seconds to see the new screen.
__reserved in case ___
WOW, Thanks!
After reading this I decided to make my own and found out that you can use "nbimg v1.1" (Just letting others know!)
BTW: I have attached a copy!
Cheers
deano309 said:
WOW, Thanks!
After reading this I decided to make my own and found out that you can use "nbimg v1.1" (Just letting others know!)
BTW: I have attached a copy!
Cheers
Click to expand...
Click to collapse
Thanks for that. Forgot to mention that
i get this...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i get this in the device properties....and it will not boot past the white m symbol
please help
anybody ? please
I'm pretty sure I've had this and just went through with flashing anyway. Maybe I'm mistaken and if you don't want to risk it, wait for more opinions.
What's happening when you choose a *.sbf for flashing?
Zatapatalkowane z MotoStone'a
i tried flashing anyway but still the device doesn't pass the white m symbol
Which drivers do you have?
BooZon said:
Which drivers do you have?
Click to expand...
Click to collapse
the lastest..
do you have a different pc to try it on? rsdlite works on my laptopn while it doesnt really work on my moms for some reason. id try it on a different pc first. next i'd like to know what sbf file your trying to flash. it could be corrupt or something, try a test with another sbf file like from peter alfonsos site and see if it works.
***wow, apparently i have to wait 5 whole minutes before posting becuase im apparently a "new" user whos been here since may of 2010... i guess i should crank out more posts heh? (looks at watch, seems to be January 2 of 2012 )
You won't be able to initiate the flash process until the phone boots directly into bootloader mode, which involves a mostly black screen with small white text. Keep trying while holding down the proper buttons and you should be able to get there.
http://www.forbes.com/sites/gordonkelly/2015/05/01/samsung-galaxy-s6-memory-problem/
I guess we will have to make sure and kill all apps. S6 does not release RAM from apps on exit, according to Mr. Kelly and Samsung.
Go into developer options and scroll down to 'limit background processes' and change it from standard to 3 or 4. Loving this phone... but the battery life... terrible
raphtal said:
Go into developer options and scroll down to 'limit background processes' and change it from standard to 3 or 4. Loving this phone... but the battery life... terrible
Click to expand...
Click to collapse
Thank you. I don't know how many "standard" is .
notjoken958 said:
http://www.forbes.com/sites/gordonkelly/2015/05/01/samsung-galaxy-s6-memory-problem/
I guess we will have to make sure and kill all apps. S6 does not release RAM from apps on exit, according to Mr. Kelly and Samsung.
Click to expand...
Click to collapse
You can tweak that setting like mentioned above, but that's useless. It may get held in ram, but it will get booted out if something else needs the ram, simply closing the app shouldn't move it out of ram, that will cause lots of resuming problems. The original HTC One suffered from that and people complained, now it holds on to it until something else needs it (using zero battery to do so) and some dumb reporter has people freaking out about it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ok . thank you @designgear