Related
Hi!
After searching the forums for a while I did not find a thread exactly matching my problem, so if I've overseen it, please just point me there.
To my problem:
I did a very stupid mistake, flashing a new custom ROM with a different kernel (as usual, cooked in Docs Kitchen) without converting back the lagfix. So I ended up with a non-booting phone - so far, so bad. Note to myself: Never flash a phone during the carnival weekend again.
So I booted into download mode and tried to recover it via Odin, but here I got my really bad surprise: USB device is not recognized, thus I Odin does not see the phone.
I tried 4 different PCs with Win7 or XP, a Linux desktop and a Macbook. I also tried 5 different USB cables (they all work with other smartphones like the Desire and the HD2). Wherever I stick the phone in, it is not recognized (code 10/code 43 in Win7). I used the stand-alone-drivers from the sticky forum thread here, and also most recent Kies versions, always the same: USB device not recognized.
Does anybody have an idea how to revive the USB connectivity? I'm almost at the point to send it in for repairs...
Or can someone elaborate how I could have killed USB with corrupting the ROM? I've to admit I do not really understand how these two are connected.
--Jens
Hi Amokbunny
You get into download mode but the PC won't recognize the phone?
That's messy and I can think of nothing that could have done that. you did not change the bootloader did you (flashed a full samsung ROM containing a bootloader, for example VJ1)?
If not I guess it's a hardware issue.
formatted to ext4 without any backup
I did a very stupid mistake too. Got darky's rom 9.3., installed i, everything worked great(really awesome thing), then i wnt to recovry mode and entered tthe speedmod and it showed mr that my phone has rtf files system not EXT4 as it should be, thou i installed the speed mode. then i chose to repartition it to ext4 but i didn't choose the backup. Just clicked to format the sd. It did formatted to EXT4, rebooted, i saw the darky's rom logo and the the phone vibrated and the logog of the droid just flashed. I tried to enter recovery mode-didn't load. Started the download mode connexted to pc used ODIN 1.7 with PDA I9000XXJPY.tar, MODEM I9000XXJPY.tar, GT-I9000-CSC-MULTI-OXAJPY-LITE.tar s1_odin_20100512.pit.
The phone has started, appeared teh stok galaxy s logo and it's just flashing. Help needed. Don,t know what to do know. I have galayx s i9000 european version.
somehow i've managed to install new firmare 2.2.1 /I9000XXJPY-baseband /2.6.32.9 [email protected] #1-kernel version, but z4root isn't working. When i start permanent root the programm ends on aquiring root shell, the debug mode is on
Got it all running, installed Darky's rom 9.3. Thanks anyway.
theduckking said:
Hi Amokbunny
You get into download mode but the PC won't recognize the phone?
That's messy and I can think of nothing that could have done that. you did not change the bootloader did you (flashed a full samsung ROM containing a bootloader, for example VJ1)?
If not I guess it's a hardware issue.
Click to expand...
Click to collapse
Yep, I can boot into download and recovery modes, but that's it.
The only apparent change in the new custom ROM was the kernel.
I also cannot really access my external SD card (it shows me some phantom files, but not the actual content of the SD), otherwise I'd try to recover it this way.
I agree with the hardware issue, if it wouldn't have coincided with the flash procedure...anyway, I think I'll send it in for repairs if I don't get it to run on this sunday.
I have the exact same problem, except that I can access my external SD. I got the problem after upgrading to Darkys Rom 9.3 the usual way, but switched from Speedmod to Voodoo. After that update, my USB didn't work anymore.
I can't get neither Xp or Win 7 to recognize my phone. USB device not recognized, and tried all the tricks. Reinstalling Kies and drivers, switching between the different modes (storage, kies media, ask, debug...) But still no USB connection.
I updated to darkys 9.5 (transferring the rom using bluetooth, and updating using CWM), but still it doesn't work.
Can get it into download mode, but still can't connect using USB and Odin.
HELP!
Did anybody ever find a solution for this?
European version of I9000, bought in Denmark. No Simlock
Same thing here after installing JV1 + Ultibread Rom 1.4... Still no solution
*shameless push*
Any solution here? I dont have that problem, but it sounds too scary to not have a working solution :S
Same prob here! Any news?
Any solution? I have the same problem.
same problem my phone is bricked while flashing a stock rom the windows disconnected the phone while flashing
ended with device not recognized even in download mode
bassem8246 said:
same problem my phone is bricked while flashing a stock rom the windows disconnected the phone while flashing
ended with device not recognized even in download mode
Click to expand...
Click to collapse
But if you are in download mode on your fone you'd rather should have a look at your configuration on the computer. Because the fone still can be flashed if the symbol for download still appears.
- Kies is shut down while ODIN is active?
- latest Samsung USB driver installed?
- Odin started with Admin?
Btw. did you try to get into recovery mode? Maybe this also still is working as the partition is quite small and chance high that it was flashed w/o faults. So you may be able to flash a zipped ROM rather than a tarball for Odin.
USB Not working when Phone plugged in... try these..
Unplug Device from PC..
Windows go to Device Manager...
Scroll down to Universal serial bus Controllers
Start with the top one and work your way down ..uninstall them all..
When done reboot Computer and let it install them all.. then try again
2.Settings --> USB Setings (under wireless & network may differ depending on Rom used) --> Try other settings Mass storage
3.Different USB ports on PC
4.Uninstall KIES from PC (reboot PC to take effect) and Reboot and just install samsung USB drivers....
5.Using windows type in msconfig in Start>Run box... windows will pop up and untick KIES from STARTUP TAB
Apply to take effect and restart machine.. try using ODIN to Flash ROM
I myself only use the Samsung USB drivers and ODIN never use KIES
or ...Check my signature and try SD formatter
I don't really know what I messed up but my computer doesn't recognize my phone any more.
After flashing Ultimate 8.2 beta and Ultimate 8.2 it just doesn't work.
What could I have done the mass storage is working with everyone except me.
I included some pictures. I'd appreciate getting helped.
banttu said:
I solved my problem here's the steps.
1. make sure that you have a rom on your sd-card to flash (just in case)
2. do a nandroid backup trough CWM
3. factory reset your phone, reboot
4. uninstall the phones drivers from the computer. unless you have a computer which doesn't have them installed
5. Connect your phone into computer and let it install the sd-card drivers
6. remove the mass storage from your computer safely
7. install the samsung galaxy s drivers for your computer
8. plug your phone into the computer. now it should be recognized and you'll be able to flash to stock if you want via Odin
Click to expand...
Click to collapse
banttu said:
I don't really know what I messed up but my computer doesn't recognize my phone any more.
After flashing Ultimate 8.2 beta and Ultimate 8.2 it just doesn't work.
What could I have done the mass storage is working with everyone except me.
I included some pictures. I'd appreciate getting helped.
Click to expand...
Click to collapse
try uninstalling the drivers for your phone on the pc.
factory reset your phone.
Does it recognise in odin when in download mode?
The same issue. I have Ultibread 1.4 and wanted to flash the JVK but windows keep disabling it. Can't find the device either in normal state or in download state. Odin also didn't recognize it
I'm on win7 x86
Did a factory reset - still the same
I tried different cables and PC's - no luck Anyone !! Any idea?
nightrave said:
I tried different cables and PC's - no luck Anyone !! Any idea?
Click to expand...
Click to collapse
I solved my problem here's the steps.
1. make sure that you have a rom on your sd-card to flash (just in case)
2. do a nandroid backup trough CWM
3. factory reset your phone, reboot
4. uninstall the phones drivers from the computer. unless you have a computer which doesn't have them installed
5. Connect your phone into computer and let it install the sd-card drivers
6. remove the mass storage from your computer safely
7. install the samsung galaxy s drivers for your computer
8. plug your phone into the computer. now it should be recognized and you'll be able to flash to stock if you want via Odin
Didn't help in my case. I did the backup and wipe/factory reset the phone. Enabled the debugging mode, removed kies and all the drivers, rebooted the phone and the pc, connected the phone to pc and had the same message Any idea where I could got it wrong?
P.S. ANd the phone is now extreeeemly laggy and unresponsive
Well this is brilliant! I have made it even worse. I thought thought, that maybe the kernel is the cause of the issue, downloaded the SGS KErnel flasher and flashed the CF-Root-XW_OXX_JV1-v1.3-BusyBox-1.17.1. After the reboot the phone is stuck at the GalaxyS logo and is not booting. I can get into the recovery and the Download mode but the phone is still not being recognized and when I try now to wipe/data or do a factory reset I get loads of red errors Please tell me that I didn't brick it yet
nightrave said:
Well this is brilliant! I have made it even worse. I thought thought, that maybe the kernel is the cause of the issue, downloaded the SGS KErnel flasher and flashed the CF-Root-XW_OXX_JV1-v1.3-BusyBox-1.17.1. After the reboot the phone is stuck at the GalaxyS logo and is not booting. I can get into the recovery and the Download mode but the phone is still not being recognized and when I try now to wipe/data or do a factory reset I get loads of red errors Please tell me that I didn't brick it yet
Click to expand...
Click to collapse
Do you have a rom on your sd-card? Flash it trough recovery.
Or doesn't recovery even recognize your sd-card?
banttu said:
Do you have a rom on your sd-card? Flash it trough recovery.
Or doesn't recovery even recognize your sd-card?
Click to expand...
Click to collapse
I have forgot to put it on ( ARghhh! My stupidity is amazing.
When I go into recovery I get lots of:
e:failed to mount /cache
and
e:Can't open /Cache
nightrave said:
I have forgot to put it on ( ARghhh! My stupidity is amazing.
When I go into recovery I get lots of:
e:failed to mount /cache
and
e:Can't open /Cache
Click to expand...
Click to collapse
And I guess that there's no nandroid backup either?
Though they didn't work in my case.
banttu said:
And I guess that there's no nandroid backup either?
Though they didn't work in my case.
Click to expand...
Click to collapse
It was in the previous kernel. But in the last one I've flashed there is no restore/backup functionality, although the backup might be actually be on the sd card
nightrave said:
It was in the previous kernel. But in the last one I've flashed there is no restore/backup functionality, although the backup might be actually be on the sd card
Click to expand...
Click to collapse
Well, there seems to be only a one solution.
You have to uninstall the phones drivers, and install them again.
Then plug your to your computer in download mode and it'll install rest of the drivers.
Then Odin should be able to recognize your phone and your good to flash stock.
But you really, really have to uninstall the drivers
Well I did it before. I uninstalled all related to samsung from the add/remove programs. Rebooted the pc and still getting this error. In the properties of the device in the device manager I have "unknown device". I don't have any drivers on the pc as far as I see. I install the drivers from here. Connect the device again and get the same error
nightrave said:
Well I did it before. I uninstalled all related to samsung from the add/remove programs. Rebooted the pc and still getting this error. In the properties of the device in the device manager I have "unknown device". I don't have any drivers on the pc as far as I see. I install the drivers from here. Connect the device again and get the same error
Click to expand...
Click to collapse
Hmm.. I did change the computer.. Maybe you should put the drivers on a flash drive and go to your friends computer to flash.
The thing is that he does not have the drivers installed before either.
Don't know why it worked for me but... it worked.
I am going to try the last thing - I have a System backup from the time I definitely didn't have them on the PC and see if this helps....
Nope.... Didn't help.... I am completely desperate. Maybe anyone would have another magical solution?
Guys! ANy idea? Plzzzzz. I'd do anything to get it back to life
Me too i get "unknown device" when attached with usb in download mode...ive been trying to get it back workin for a week now...tried everything...which means i can't flash it to gingerbread
Anyone got any ideas ?
I have tried different PC's and it's the same. Is there maybe a way to reset the device somehow?
nightrave said:
I have tried different PC's and it's the same. Is there maybe a way to reset the device somehow?
Click to expand...
Click to collapse
Hi!
I have a similar problem.
For few days, I cannot connect my SGS to my Notebook.
I have windows 7 x64 installed, and it has never had any problems with connections.
Now, I don't know why, but I cannot connect it.
I tried to connect it to another computer, which has windows 7 x86.
And it was succesfull!
Now, it seems, that I don't have a hardware issue, but I cannot imagne, how I could solve this problem.
I already tried these:
- remove drivers/programs
- tried other USB slots
- downloaded newer USB driver for x64
- removed USB drivers (all of them)
- unplugged my notebook for over 5 minutes (also removed the battery)
Every time I plug my SGS to my PC only this message appears:
"unknown device" - or something similar, because I have a hungarian windows 7.
Sorry about my english.
Has anyone any idea?
Thx for advance
My SGS isn't bricked. But lately after I flashed a deodexed 2.3.3 ROM, I have a hard time connecting my USB (USB not recognized). This afternoon, my phone jammed and won't boot (Stuck in Samsung Galaxy S I9000 Screen). I can't enter the recovery mode either for no reason (used to be able to).
Now I can't flash a stock ROM because my USB isn't recognized and recovery mode is unaccessible too. Trying to install the drivers for the USB now. Anyway as it's installing, any other ways to bring my phone back?
Flash a rom through odin. You could try darky's 9.2 ressurection edition.
The problem now is I could not flash with Odin because my USB isn't working
smiles.smiley said:
My SGS isn't bricked. But lately after I flashed a deodexed 2.3.3 ROM, I have a hard time connecting my USB (USB not recognized). This afternoon, my phone jammed and won't boot (Stuck in Samsung Galaxy S I9000 Screen). I can't enter the recovery mode either for no reason (used to be able to).
Now I can't flash a stock ROM because my USB isn't recognized and recovery mode is unaccessible too. Trying to install the drivers for the USB now. Anyway as it's installing, any other ways to bring my phone back?
Click to expand...
Click to collapse
seriously try using other computer or laptop.. install the required drivers on your friends computer and then try to flash a different rom via odin
tried that. on different comp. same problem. USB not recognized with the drivers installed
I guess this is the problem. When I can't boot my phone, I did a backup restore. Maybe something is messed up and drivers don't recognize my phone as Samsung Galaxy S anymore. Anyway to force it to recognize?
http://www.nirsoft.net/utils/usb_devices_view.html
REMOVE USB DEVICES .
USB connection must be a motherboard connector .
jje
I'm sorry for being a noob. I've downloaded USBDeview. I should remove USB devices and? What do i do after that?
My USB device is Not Recognized. will it show on USBDeview?
Shows old usb drivers delete the lot on that port .
jje
Deleted everything. Plugged in my SGS in Downloading Mode. Still don't get anything.
smiles.smiley said:
Deleted everything. Plugged in my SGS in Downloading Mode. Still don't get anything.
Click to expand...
Click to collapse
if you can go into download mode then you surely can get it flashed with odin ..
try downloading the drivers again and then installing again and then try again....
... if everything fails then you should send it to the service center
Try unplugging and plugging the usb repeatedly. I've had this happen before, and I was able to get the phone recognised by doing this.
I installed 4.4.2 Rom Mackay.
MacKay recovery and install the kernel as normal ...
MacKay ROM PC phone has ever seen ...
I've done all WiPeer and what's in the said format and went to wipe
the phone just now entering download mode not recovery mode, the phone?
y in download mode, remove the USB device is not recognized when I say tactics?
I did not see anyway PCs
now I do not see ...
I uninstall the drivers did not have to restore.
s3's got no problem seeing him in a way he never did anything not connected to the phone from your pc.
Thank you in advance for your help ...
Hello guys,
as I wanted to delete unnecessary blow apps I think I deleted some important System app that is responsible for connecting to a PC. Now the S5 mini behaves as I it is connected to a battery charger when it is connected to a PC, there is no sign that it is recognized by the PC. I allready tried to Flash recovery with Odin but it isnt recognized by Odin too (in download mode). Am I doing something wrong? Can someone help me PLEASE get my phone working again and flash some custom ROM? Thanks in advance!!!
Try to install kies drivers for your smartphone and retry on odin. I think the only problem is the missing of the drivers
No, Kies is installed and it has no effect. Neither Kies nor the Computer recognize the phone, even on the phone theres no sign it is connected to the PC except the battery loading sign.
Try To find the drivers on google and install them. Do you have a custom recovery? If yes you can flash a custom rom
Download mode isn't related to kernel nor recovery, so unless you somehow wiped all phone's memory (all partitions) you'll still have download mode. So if you can enter Samsung's download mode and your computer doesn't recognize the phone it's one of them:
1. Bad cable, some USB cables only charge, no data connection;
2. Bad USB port on either phone or computer, try and different computer.
Good luck.