Database Develop

[Q] Questions about Firmware

Im having my HTC ONE WWE Asia originally CID HTC_044. I have S-OFF, recovery, super CID, root and running 1.29. I want to upgrade to 2.24.707.1 and i have the firmware zip package but need some details:
1) I have to relock my bootloader to upgrade. Since I have S-OFF and etc, will the relock and unlockefter upgrading) process brick my phone?
2) Currently I have hboot 1.44.0000, will upgrade to new hboot (I think its v1.54) brick my phone?
3) Most thread inform i wont lose my S-OFF, just want to reconfirm. Will I lose my S-OFF after upgrade?
4) After upgrade, will i lose my data?
5) I downloaded the package from a China site, do I need to change anything inside this package before flashing?
Below is my phone details. The firmware download link is below as well.
Thanks in advance
Download : 2.24.707.1-firmware.zip
Code:
INFOversion: 0.5
INFOversion-bootloader: 1.44.0000
INFOversion-baseband: 4A.14.3250.13
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.29.707.16
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: xxxxxxxxxxxx
INFOimei: xxxxxxxxxxxxxx
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0714000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 3785mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.067s

harvin23 said:
Im having my HTC ONE WWE Asia originally CID HTC_044. I have S-OFF, recovery, super CID, root and running 1.29. I want to upgrade to 2.24.707.1 and i have the firmware zip package but need some details:
1) I have to relock my bootloader to upgrade. Since I have S-OFF and etc, will the relock and unlockefter upgrading) process brick my phone?
2) Currently I have hboot 1.44.0000, will upgrade to new hboot (I think its v1.54) brick my phone?
3) Most thread inform i wont lose my S-OFF, just want to reconfirm. Will I lose my S-OFF after upgrade?
4) After upgrade, will i lose my data?
5) I downloaded the package from a China site, do I need to change anything inside this package before flashing?
Below is my phone details. The firmware download link is below as well.
Thanks in advance
Download : 2.24.707.1-firmware.zip
Code:
INFOversion: 0.5
INFOversion-bootloader: 1.44.0000
INFOversion-baseband: 4A.14.3250.13
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.29.707.16
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: xxxxxxxxxxxx
INFOimei: xxxxxxxxxxxxxx
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0714000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 3785mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.067s
Click to expand...
Click to collapse
You do not have to relock your bootloader to do the upgrade. If you have S-off then you can just follow the instructions for flashing. It will upgrade you hboot, so if you relock before doing it you can't get back to S-off because the revone tool doesn't work on the new hboot.
I looked and that zip has the stock recovery in it so you should delete recovery.img from that zip before flashing to keep your custom recovery.
Won't lose s-off or data.
This is good guide for the firmware flashing:
http://forum.xda-developers.com/showpost.php?p=43551752&postcount=5082
Info:
http://forum.xda-developers.com/showthread.php?t=2182823
PS - Most important thing before doing a firmware flash, DO NOT GO S-ON. Keep S-off until you need to return the device, otherwise you may not be able to get it back on and will have trouble restoring to stock if needed.

crushalot said:
You do not have to relock your bootloader to do the upgrade. If you have S-off then you can just follow the instructions for flashing. It will upgrade you hboot, so if you relock before doing it you can't get back to S-off because the revone tool doesn't work on the new hboot.
I looked and that zip has the stock recovery in it so you should delete recovery.img from that zip before flashing to keep your custom recovery.
Won't lose s-off or data.
This is good guide for the firmware flashing:
http://forum.xda-developers.com/showpost.php?p=43551752&postcount=5082
Info:
http://forum.xda-developers.com/showthread.php?t=2182823
PS - Most important thing before doing a firmware flash, DO NOT GO S-ON. Keep S-off until you need to return the device, otherwise you may not be able to get it back on and will have trouble restoring to stock if needed.
Click to expand...
Click to collapse
So this means the hboot upgrade would not affect my s-off right? Just a little paranoid about losing s-off and bricking my phone.
Also thanks for the advice. I wanted to relock my device and upgrade the firmware. Would have end up doing what I am afraid of.
Sent from my HTC One using xda premium

harvin23 said:
So this means the hboot upgrade would not affect my s-off right? Just a little paranoid about losing s-off and bricking my phone.
Also thanks for the advice. I wanted to relock my device and upgrade the firmware. Would have end up doing what I am afraid of.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Correct, if you already have s-off then upgrading the hboot won't turn you s-on. Also since you keep s-off you can downgrade the hboot if needed.
Basically if you have s-off then pretty much nothing is going to take that away, and it will allow you to get out of most jams, so it is pretty hard to brick a device with s-off.
Keep you bootloader unlocked and keep s-off and have fun.

Thanks mate. Your advice is much appreciated.
Sent from my HTC One using xda premium

[Q] modelid is PN071*****?

Is that supposed to happen? Is it safe to assume that my mid is PN0710000 then? if not, how should I fix this?

Wait, where is written this MID?

in adb when trying to fastboot getvar all. It probably didn't help that it says getvar all failed, but I'm stuck here

Wait, if you will you the command:
Code:
fastboot getvar all
you musb be in fastboot usb.
If you're in android, you can boot in fastboot with the command:
Code:
adb reboot bootloader[/url] and now you can use the getvar.
p.s. Post it here deleting imei and serial number :)

I did it just like that, did it a couple more times just to make sure, and still got the same result. Anyways:
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.44.0000
INFOversion-baseband: 4A.14.3250.13
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 5.29.401.13
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: xxxxxxxxxx
INFOimei: xxxxxxxxx
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN071****
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4310mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.067s
Click to expand...
Click to collapse
please tell me this can be fixed...

Habel said:
I did it just like that, did it a couple more times just to make sure, and still got the same result.
Click to expand...
Click to collapse
Your version main start with 5, when the latest base starts with 3, and this is strange.
However, have you flashed some firmware in this period?
Probably there is a solution, but i don't know atm.

well, I just bought this phone yesterday (yay me), realized something was off when I couldn't OTA update (which is because of S-off), and now afraid to just flash the new 3.62 firmware because of the stars (asterisks?). could it be i did something wrong with the commands?

Try to flash a ruu for your phone

ok, I'll take a look at that. thanks for your help Guich
edit: what kind of RUU should I get? do i need to match it with the bootloader or something else, or any one of them works?

Habel said:
ok, I'll take a look at that. thanks for your help Guich
edit: what kind of RUU should I get? do i need to match it with the bootloader or something else, or any one of them works?
Click to expand...
Click to collapse
A ruu compatible with your cid
Because you're s-off and all ruu can be flashed fine!

hey Guich, I took your advice and tried to flash the RUU, but now i'm getting very confused. the flashing went fine, but I see no changes on my phone. In Settings>About>Software Information the software version is still 1.29.401.13, while getvar all shows me that the version is 3.62.401.1. Is there anything I'm misunderstanding here?
edit: do i need to unlock the bootloader for any of this?

I have same PN071**** I dont remember what was there before I have it from Ebay probly some Chinesse version but the cover say that it is PN714000, I accidently changed S-OFF to S On and flashed another rom.I cant do S-OFF anymore tried many things. Riffbox doesnt work with 714000 unfortunately.

HTC One software update

Hello, I have a problem with updating my HTC One, usually I would go to phone's settings, info, updates, it would scan for new software, download it, reboot, install and it's good to go. Recently I rooted my phone and installed TWRP, now when it downloads the update it reboots but enters TWRP recovery but what do I do from there? If I just reboot I still get the update prompt. Thanks for any help.

theleet said:
Hello, I have a problem with updating my HTC One, usually I would go to phone's settings, info, updates, it would scan for new software, download it, reboot, install and it's good to go. Recently I rooted my phone and installed TWRP, now when it downloads the update it reboots but enters TWRP recovery but what do I do from there? If I just reboot I still get the update prompt. Thanks for any help.
Click to expand...
Click to collapse
a little bit of searching, would have told you that you need to have stock recovery for OTAs to work.... (and obviously stock ROM)

Ok just a quick set of questions then so I don't brick my phone if you don't mind..
So to update I go like this:
- flash stock recovery with TWRP (recovery 4.19.401.9.img I found this?)
- go to settings etc and update as usual
- when updated flash TWRP again
- reroot my phone
I this ok? Will I lose any data doing it like this? My phone is just rooted, s-on.
Thanks.

theleet said:
Ok just a quick set of questions then so I don't brick my phone if you don't mind..
So to update I go like this:
- flash stock recovery with TWRP (recovery 4.19.401.9.img I found this?)
- go to settings etc and update as usual
- when updated flash TWRP again
- reroot my phone
I this ok? Will I lose any data doing it like this? My phone is just rooted, s-on.
Thanks.
Click to expand...
Click to collapse
i don't think 4.19.401.9 will match you current version, so start by posting a "fastboot getvar all" (excluding IMEI and s/n)
and the ROM is stock?

nkk71 said:
i don't think 4.19.401.9 will match you current version, so start by posting a "fastboot getvar all" (excluding IMEI and s/n)
and the ROM is stock?
Click to expand...
Click to collapse
Yes the ROM is 100% stock 4.19.401.8 just rooted.
INFOversion: 0.5
INFOversion-bootloader: 1.56.0000
INFOversion-baseband: 4A.23.3263.28
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.19.401.8
INFOversion-misc: PVT SHIP S-ON
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: HTC__032
INFObattery-status: good
INFObattery-voltage: 3823mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-4dab9d12
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.043s
This is the info you requested. Should I look for 4.19.401.8 recovery?

theleet said:
Yes the ROM is 100% stock 4.19.401.8 just rooted.
INFOversion-bootloader: 1.56.0000
INFOversion-main: 4.19.401.8
INFOversion-misc: PVT SHIP S-ON
INFOproduct: m7_ul
INFOmodelid: PN0710000
INFOcidnum: HTC__032
This is the info you requested. Should I look for 4.19.401.8 recovery?
Click to expand...
Click to collapse
you're getting the update to .11 ?
anyway, yes, get stock recovery 4.19.401.8, available here: http://d-h.st/0Jy thanks to @Guich
flash that, and you should be good to install the OTA, you may loose root along the way, in which case you'll need to re-root after the OTA

nkk71 said:
you're getting the update to .11 ?
anyway, yes, get stock recovery 4.19.401.8, available here: http://d-h.st/0Jy thanks to @Guich
flash that, and you should be good to install the OTA, you may loose root along the way, in which case you'll need to re-root after the OTA
Click to expand...
Click to collapse
Yes, I get the update prompt all the time it's driving me insane so I think the best way to get rid of it is to simply update Thanks for all the help

I can not return to official rom

hi guys
first excuse me for bad English and second, for being so dumb
I will summarize to save time
I decided to use a rom cyanogen on my device
only I did not have proper care and did not do the backup security official rom
Now I want to go back to stock version
tried several guides the internet and none helped me, always returns me errors
I have written official recovery, and locked the bootloader
I can not find RUU.exe for my version
Here is what I did and the mistakes returns?
C: \ Fastboot> fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.28.3218.04
INFOversion-cpld: None
INFOversion-microprocessor: None
INFOversion-main: 6.15.599.101
INFOversion-misc: PVT SHIP S-ON
INFOmeid: 00000000000000
Infoproduct: m7_u
INFOplatform: HBOOT-8064
INFOmodelid: PN0711000
INFOcidnum: HTC__332
INFObattery-status: good
INFObattery-voltage: 3858mV
INFOpartition-layout: Generic
Infosecurity: on
INFObuild-mode: SHIP
INFOboot-mode: fastboot
INFOcommitno-bootloader: dirty-6d8a0b9b
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. Total time: 0.050s
I used this same version as of this writing al 6.15.599.101, and was not, the bootloader this relocked and the recovery this the 4.4.3_stock-recovery works ... and enter the official recovery the it was before, and even Then relocked the error I have not found the RUU.exe to this version, most believe TBM would not work because the fastboot already given Beheerder error ..... I tried to write que way, Then I downloaded the official rom here http: // www .htcdev.co ... r / downloads / P75 notice, is the seventh rom from top to bottom, exactly q is described on my device,
One M7
HTC LA SPA (ES) MR 1424 3.4.10 v4.4.3
6.15.599.101
after downloading, the renamed file to rom and put in fo fastboot folder, casette The Following command:
C: \ Fastboot> fastboot oem rebootRUU
... INFOStart Verify: 3
OKAY [0.031s]
finished. Total time: 0.033s
C: \ Fastboot> fastboot flash zip rom.zip
sending 'zip' (433842 KB) ... OKAY [38.841s]
writing 'zip' ... INFOsignature checking ...
FAILED (remote: 12 signature verify fail)
finished. Total time: 84.695s
with the unlock bootloader of this msg When trying to flash:
C: \ Fastboot> fastboot flash zip rom.zip
sending 'zip' (433842 KB) ... OKAY [39.89
writing 'zip' ... InfoZip head
InfoZip info parsing ...
INFORead zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
finished. Total time: 40.131s
sorry to bother
If anyone knows help me I will be very grateful :good:

Steel-Cleiton said:
hi guys
first excuse me for bad English and second, for being so dumb
I will summarize to save time
I decided to use a rom cyanogen on my device
only I did not have proper care and did not do the backup security official rom
Now I want to go back to stock version
tried several guides the internet and none helped me, always returns me errors
I have written official recovery, and locked the bootloader
I can not find RUU.exe for my version
Here is what I did and the mistakes returns?
C: \ Fastboot> fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.28.3218.04
INFOversion-cpld: None
INFOversion-microprocessor: None
INFOversion-main: 6.15.599.101
INFOversion-misc: PVT SHIP S-ON
INFOmeid: 00000000000000
Infoproduct: m7_u
INFOplatform: HBOOT-8064
INFOmodelid: PN0711000
INFOcidnum: HTC__332
INFObattery-status: good
INFObattery-voltage: 3858mV
INFOpartition-layout: Generic
Infosecurity: on
INFObuild-mode: SHIP
INFOboot-mode: fastboot
INFOcommitno-bootloader: dirty-6d8a0b9b
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. Total time: 0.050s
I used this same version as of this writing al 6.15.599.101, and was not, the bootloader this relocked and the recovery this the 4.4.3_stock-recovery works ... and enter the official recovery the it was before, and even Then relocked the error I have not found the RUU.exe to this version, most believe TBM would not work because the fastboot already given Beheerder error ..... I tried to write que way, Then I downloaded the official rom here http: // www .htcdev.co ... r / downloads / P75 notice, is the seventh rom from top to bottom, exactly q is described on my device,
One M7
HTC LA SPA (ES) MR 1424 3.4.10 v4.4.3
6.15.599.101
after downloading, the renamed file to rom and put in fo fastboot folder, casette The Following command:
C: \ Fastboot> fastboot oem rebootRUU
... INFOStart Verify: 3
OKAY [0.031s]
finished. Total time: 0.033s
C: \ Fastboot> fastboot flash zip rom.zip
sending 'zip' (433842 KB) ... OKAY [38.841s]
writing 'zip' ... INFOsignature checking ...
FAILED (remote: 12 signature verify fail)
finished. Total time: 84.695s
with the unlock bootloader of this msg When trying to flash:
C: \ Fastboot> fastboot flash zip rom.zip
sending 'zip' (433842 KB) ... OKAY [39.89
writing 'zip' ... InfoZip head
InfoZip info parsing ...
INFORead zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
finished. Total time: 40.131s
sorry to bother
If anyone knows help me I will be very grateful :good:
Click to expand...
Click to collapse
Sorry, I can't understand everything you said but first edit your first post and remove your IMEI and SERIALNO. Dont post these number ever, you want to keep these numbers for yourself.
There is no ruu for .599 version neither any stock rom. The file you are trying to flash is not a ruu/rom, its a kernel source and its not useful for your situation.
You can use custom roms, or you will need to achieve s-off to change your CID/MID and use another ruu version like the .401 version or the .1540 version.

alray said:
Sorry, I can't understand everything you said but first edit your first post and remove your IMEI and SERIALNO. Dont post these number ever, you want to keep these numbers for yourself.
There is no ruu for .599 version neither any stock rom. The file you are trying to flash is not a ruu/rom, its a kernel source and its not useful for your situation.
You can use custom roms, or you will need to achieve s-off to change your CID/MID and use another ruu version like the .401 version or the .1540 version.
Click to expand...
Click to collapse
thanks for your response man
I edited and the first post as requested
I now understand that I can not go back to version 599 stock
if I use another CID / MID will be able to receive OTA updates in the future?
anyway I can not go back to version 599, I will have to use another stock like you said
you could teach me how to make changes, to use another version rom stock?
sorry for bad English

Steel-Cleiton said:
if I use another CID / MID will be able to receive OTA updates in the future?
Click to expand...
Click to collapse
Yes
you could teach me how to make changes, to use another version rom stock?
Click to expand...
Click to collapse
Flash a close to stock rom (needed to achieve s-off)
achieve s-off using sunshine (will cost you 25$)
change your CID to BS_US001
Code:
fastboot oem writecid BS_US001
change your MID to PN0712000 using the MID change tool in custom recovery
flash the 6.07.1540.2 RUU.

alray said:
Yes
Flash a close to stock rom (needed to achieve s-off)
achieve s-off using sunshine (will cost you 25$)
change your CID to BS_US001
Code:
fastboot oem writecid BS_US001
change your MID to PN0712000 using the MID change tool in custom recovery
flash the 6.07.1540.2 RUU.
Click to expand...
Click to collapse
let's see if I understand
sunshine is a paid program ?
is this site I'll download it http://theroot.ninja/download.html
he is a .apk?
I will install on HTC and runs it?
I understand the rest of what you said
only on the sunshine did not quite understand how to make
Thx and sorry my bad english

Steel-Cleiton said:
let's see if I understand
sunshine is a paid program ?
is this site I'll download it http://theroot.ninja/download.html
he is a .apk?
I will install on HTC and runs it?
I understand the rest of what you said
only on the sunshine did not quite understand how to make
Thx and sorry my bad english
Click to expand...
Click to collapse
Yes sunshine is a paid app to achieve s-off. Sunshine is the only method to s-off HTC One on Hboot 1.57. This app must be used on a close to stock rom to work correctly. Before charging you the 25$ (via paypal) the app will run some tests to make sure s-off is possible so you will not pay anything if s-off is not achieved.

alray said:
Yes sunshine is a paid app to achieve s-off. Sunshine is the only method to s-off HTC One on Hboot 1.57. This app must be used on a close to stock rom to work correctly. Before charging you the 25$ (via paypal) the app will run some tests to make sure s-off is possible so you will not pay anything if s-off is not achieved.
Click to expand...
Click to collapse
ok I've downloaded the sunshine .apk
I can install it without problems
only that I get the following msg when I run the software:
your device has debuggable rmdisk (ro debuggable=1). you need to flash a non-debuggable boo.img stock would be best
another question noob
I live in Brazil
this CID will work all operators?
4g will work as before?
there is some CID running all operators?
If the answer is yes, I will continue to receive OTA update?
I mean if I install a CID for all operators

Steel-Cleiton said:
ok I've downloaded the sunshine .apk
I can install it without problems
only that I get the following msg when I run the software:
your device has debuggable rmdisk (ro debuggable=1). you need to flash a non-debuggable boo.img stock would be best
Click to expand...
Click to collapse
Flash a stock rom!
this one should work fine
another question noob
I live in Brazil
this CID will work all operators?
4g will work as before?
there is some CID running all operators?
If the answer is yes, I will continue to receive OTA update?
I mean if I install a CID for all operators
Click to expand...
Click to collapse
4G will work fine as before (no LTE).
BS_US001 is the dev edition cid so you'll get ota updates everywhere.

alray said:
Flash a stock rom!
4G will work fine as before (no LTE).
BS_US001 is the dev edition cid so you'll get ota updates everywhere.
Click to expand...
Click to collapse
Now I was confused, sorry my ignorance
I ask a little patience I'm understanding gradually
every time I tried to flash a rom received errors
how do I write this rom you posted?
I use fastboot or TWRP for this?
need to write the official recovery and lock the bootloader?
I'm already very grateful to you man
I tried a lot of help throughout internet
and only you so far helped me
thank you for the patience that is having me

Steel-Cleiton said:
Now I was confused, sorry my ignorance
I ask a little patience I'm understanding gradually
every time I tried to flash a rom received errors
how do I write this rom you posted?
I use fastboot or TWRP for this?
need to write the official recovery and lock the bootloader?
I'm already very grateful to you man
I tried a lot of help throughout internet
and only you so far helped me
thank you for the patience that is having me
Click to expand...
Click to collapse
no don't lock the bootloader and don't flash the stock recovery. Just copy the rom to your phone storage and flash in using twrp recovery.

alray said:
no don't lock the bootloader and don't flash the stock recovery. Just copy the rom to your phone storage and flash in using twrp recovery.
Click to expand...
Click to collapse
I'll try when I get home
I'm at work now, get out of here one hour
thanks a lot:good:

alray said:
no don't lock the bootloader and don't flash the stock recovery. Just copy the rom to your phone storage and flash in using twrp recovery.
Click to expand...
Click to collapse
uhuuuuuuuuuuuuuu
worked my friend
now a question
this is a rom stock?
or is a developer rom?
the CID needs to be changed to match the version of the rom, just so I can receive OTA?
if I do not change CID and continue using this rom version, I can receive OTA update?
there is some rom stock lollipop version?
thank you my friend
I warmly thank for your patience

Steel-Cleiton said:
uhuuuuuuuuuuuuuu
worked my friend
now a question
this is a rom stock?
or is a developer rom?
the CID needs to be changed to match the version of the rom, just so I can receive OTA?
if I do not change CID and continue using this rom version, I can receive OTA update?
there is some rom stock lollipop version?
thank you my friend
I warmly thank for your patience
Click to expand...
Click to collapse
If you have achieved S-OFF then follow the steps alray posted here starting with Step 3. When you complete the steps successfully your phone will be a DevEd on the last version waiting for the Lollipop OTA.

majmoz said:
If you have achieved S-OFF then follow the steps alray posted here starting with Step 3. When you complete the steps successfully your phone will be a DevEd on the last version waiting for the Lollipop OTA.
Click to expand...
Click to collapse
yes I did all the steps
not only posted yesterday because it was late
Alray was my master
I owe much to him

alray said:
no don't lock the bootloader and don't flash the stock recovery. Just copy the rom to your phone storage and flash in using twrp recovery.
Click to expand...
Click to collapse
hello my good friend
I learned what you taught me
was complicated by I do not have a good English
more I got it, thanks for your patience
look:
before:
C: \ Fastboot> fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.28.3218.04
INFOversion-cpld: None
INFOversion-microprocessor: None
INFOversion-main: 6.15.599.101
INFOversion-misc: PVT SHIP S-ON
INFOmeid: 00000000000000
Infoproduct: m7_u
INFOplatform: HBOOT-8064
INFOmodelid: PN0711000
INFOcidnum: HTC__332
INFObattery-status: good
INFObattery-voltage: 3858mV
INFOpartition-layout: Generic
Infosecurity: on
INFObuild-mode: SHIP
INFOboot-mode: fastboot
INFOcommitno-bootloader: dirty-6d8a0b9b
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. Total time: 0.050s
now:
C:\Fastboot>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.28.3218.04
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 6.07.1540.2
INFOversion-misc: PVT SHIP S-OFF
INFOserialno
INFOimei:
INFOmeid: 00000000000000
INFOproduct: m7_u
INFOplatform: HBOOT-8064
INFOmodelid: PN0712000
INFOcidnum: BS_US001
INFObattery-status: good
INFObattery-voltage: 4271mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-6d8a0b9
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.074s
this all right?
now can receive future OTA updates?

Steel-Cleiton said:
hello my good friend
I learned what you taught me
was complicated by I do not have a good English
more I got it, thanks for your patience
look:
before:
C: \ Fastboot> fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.28.3218.04
INFOversion-cpld: None
INFOversion-microprocessor: None
INFOversion-main: 6.15.599.101
INFOversion-misc: PVT SHIP S-ON
INFOmeid: 00000000000000
Infoproduct: m7_u
INFOplatform: HBOOT-8064
INFOmodelid: PN0711000
INFOcidnum: HTC__332
INFObattery-status: good
INFObattery-voltage: 3858mV
INFOpartition-layout: Generic
Infosecurity: on
INFObuild-mode: SHIP
INFOboot-mode: fastboot
INFOcommitno-bootloader: dirty-6d8a0b9b
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. Total time: 0.050s
now:
C:\Fastboot>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.28.3218.04
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 6.07.1540.2
INFOversion-misc: PVT SHIP S-OFF
INFOserialno
INFOimei:
INFOmeid: 00000000000000
INFOproduct: m7_u
INFOplatform: HBOOT-8064
INFOmodelid: PN0712000
INFOcidnum: BS_US001
INFObattery-status: good
INFObattery-voltage: 4271mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-6d8a0b9
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.074s
this all right?
now can receive future OTA updates?
Click to expand...
Click to collapse
Yes its all good, glad it worked :good:

alray said:
Yes its all good, glad it worked :good:
Click to expand...
Click to collapse
I know not how to thank you
I admire your dedication and patience
I will continue to follow this forum
I have a lot to learn here
thanks again Alray

alray said:
Yes its all good, glad it worked :good:
Click to expand...
Click to collapse
I have just received OTA lollipop
thank you again
so I pay my credit card, I will make a donation to you friend

I need some help, my phone has the same software number.
I tried to change the MID using this post as reference: http://forum.xda-developers.com/showthread.php?t=2322820
I get the gray screen, but when I try to run the RUU software I'm having error 170, phone is not connected.
The software just ask me to press finish to close the program, and don't install the rom.
How to solve this error 170?

Guru Reset to Stock, OTA doesn't work

Hi,
So I have used a guru reset for my Vodafone AU branded HTC One (M7) as there is no RUU for it. I have gone ahead and "relocked" the bootloader (I'm S-ON BTW), and then attempted to run OTA. All works fine until it finished installing the update after which it just goes into a boot loop. I've attempted this twice, both times wiping everything beforehand and installing stock recovery (obviously) and stock radio. Is there something else I need to do to get the OTA to work properly or is it impossible to run OTA using this guru reset.
Any help would be much appreciated.

acnak said:
Hi,
So I have used a guru reset for my Vodafone AU branded HTC One (M7) as there is no RUU for it. I have gone ahead and "relocked" the bootloader (I'm S-ON BTW), and then attempted to run OTA. All works fine until it finished installing the update after which it just goes into a boot loop. I've attempted this twice, both times wiping everything beforehand and installing stock recovery (obviously) and stock radio. Is there something else I need to do to get the OTA to work properly or is it impossible to run OTA using this guru reset.
Any help would be much appreciated.
Click to expand...
Click to collapse
we need some more info
fastboot getvar all (remove imei & serial no)
which Guru reset rom you are using ? and which OTA ?

yatindroid said:
we need some more info
fastboot getvar all (remove imei & serial no)
which Guru reset rom you are using ? and which OTA ?
Click to expand...
Click to collapse
I'm not allowed to post links, it was from htc1guru and the pathway is /dld/guru_reset_m7_2-24-980-2-zip/
It is the latest OTA available, containing Sense 5.5 and Android 4.4.2. I'm not on stock anymore so I don't know any more specifics.
This is the getvar info:
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4A.17.3250.14
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0714000
cidnum: VODAP021
battery-status: good
battery-voltage: 3912mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0

acnak said:
I'm not allowed to post links, it was from htc1guru and the pathway is /dld/guru_reset_m7_2-24-980-2-zip/
It is the latest OTA available, containing Sense 5.5 and Android 4.4.2. I'm not on stock anymore so I don't know any more specifics.
This is the getvar info:
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4A.17.3250.14
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0714000
cidnum: VODAP021
battery-status: good
battery-voltage: 3912mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
That reset rom is very old version so after that you cant flash ota
You need more recent rom
Your version main not shows anything so see at fastboot screen any how find firmware version
Do you have Australia Vodafone ?
A member made kitkat reset rom for i will send you link for that

yatindroid said:
That reset rom is very old version so after that you cant flash ota
You need more recent rom
Your version main not shows anything so see at fastboot screen any how find firmware version
Do you have Australia Vodafone ?
A member made kitkat reset rom for i will send you link for that
Click to expand...
Click to collapse
This was the only stock ROM for Vodafone AU I can find. I originally made a nandroid backup when I first rooted the phone but that has since been accidentally deleted. If you have a more recent version of the stock Vodafone AU ROM that would be much appreciated.

version-main is the most important bit and it's blank :-/ I think older versions of TWRP or CWM had a blank version-main bug? Do you remember what was the last OTA update you took or roughly when? Otherwise, maybe update recovery and see if version-main shows up.
Australian stock unbranded nandroids should also work for you. Go check the Australian users thread for nandroid backups for almost every version (x.x.980.x).
@yatindroid I'm curious about making my own reset ROM. Got any links to info/how to?

deeevan said:
version-main is the most important bit and it's blank :-/ I think older versions of TWRP or CWM had a blank version-main bug? Do you remember what was the last OTA update you took or roughly when? Otherwise, maybe update recovery and see if version-main shows up.
Australian stock unbranded nandroids should also work for you. Go check the Australian users thread for nandroid backups for almost every version (x.x.980.x).
@yatindroid I'm curious about making my own reset ROM. Got any links to info/how to?
Click to expand...
Click to collapse
Do you have Nandroid backup ?
I have Ubuntu so its easy to open and extract nandroid backup and compression
open nandroid backup extract system and data/preload folder
Take any reset rom replace its system and data folder to your backup folders
replace boot recovery radio files from same version (extract from OTA firmware)
edit aroma config details version etc with notepad++
now zip all files and its ready nothing much require
I think @Joeisgood99 have reset rom 6.xx.980.x version

Aah pretty simple then. Yeah, I have nandroid backups. In fact I supplied the contents of the reset ROM in question in this thread. My main stumbling block was downloading a reset ROM as htc1guru was down the last couple times I thought about doing this.

deeevan said:
Aah pretty simple then. Yeah, I have nandroid backups. In fact I supplied the contents of the reset ROM in question in this thread. My main stumbling block was downloading a reset ROM as htc1guru was down the last couple times I thought about doing this.
Click to expand...
Click to collapse
ok i will send build base zip

@deeevan & @yatindroid.
I'm away from my computer until Friday so can't upload my aroma reset to stock until then.
I never uploaded it coz I haven't had a chance to test it ( deeevan understands why) as 6.11.980.12 is still the latest OTA for Optus Australia, and that's the version my reset will take you back to.
When I get home I'll post a link on the Aussie m7 thread and I'll pm the link to you as well yatindroid in case u need to pass on to others. @deeevan below is the link (go back a page or two,) where @alray walks me through how to make your own aroma reset. All u need is a RUU/OTA of what version u wanna go back to, any old aroma reset .zip and @alray s detailed instructions and your set.
http://forum.xda-developers.com/htc...ersions-stock-rom-t2994683/page4#post59335167
Have a good one guys!

yatindroid said:
ok i will send build base zip
Click to expand...
Click to collapse
Thanks! 6MB is much nicer to download than 1GB+, especially when I'm going to delete most of that anyway

yatindroid said:
That reset rom is very old version so after that you cant flash ota
You need more recent rom
Your version main not shows anything so see at fastboot screen any how find firmware version
Do you have Australia Vodafone ?
A member made kitkat reset rom for i will send you link for that
Click to expand...
Click to collapse
Sorry for resurrecting an old zombie thread, but after a few days of searching the forums and multiple flashes and resetting of my phone (HTC One m7, Australia Vodafone), this has been the thread closest to my own issue. Like OP Poster acnak, I am trying to reset my phone to stock using Guru Reset (guru_reset_m7_2-24-980-2.zip) and while it works, when it goes to install an OTA when it reboots it gets stick in a boot loop.
I have looked for a more recent reset but can't find one. Can someone point me in the direction of one, or give pointers on how to make one myself from one of the ota I have downloaded... or something equally as easy but obscure that I haven't found it yet.
Fastboot getvar all Info:
INFOversion: 0.5
INFOversion-bootloader: 1.61.0000
INFOversion-baseband: 4A.17.3250.14
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 7.21.980.22
INFOversion-misc: PVT SHIP S-ON
INFOserialno: ---
INFOimei: ---
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0714000
INFOcidnum: VODAP021
INFObattery-status: good
INFObattery-voltage: 4321mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-0e2a13e5
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Cheers and thanks in advance,
Azurewren

Azurewren said:
Sorry for resurrecting an old zombie thread, but after a few days of searching the forums and multiple flashes and resetting of my phone (HTC One m7, Australia Vodafone), this has been the thread closest to my own issue. Like OP Poster acnak, I am trying to reset my phone to stock using Guru Reset (guru_reset_m7_2-24-980-2.zip) and while it works, when it goes to install an OTA when it reboots it gets stick in a boot loop.
I have looked for a more recent reset but can't find one. Can someone point me in the direction of one, or give pointers on how to make one myself from one of the ota I have downloaded... or something equally as easy but obscure that I haven't found it yet.
Fastboot getvar all Info:
INFOversion: 0.5
INFOversion-bootloader: 1.61.0000
INFOversion-baseband: 4A.17.3250.14
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 7.21.980.22
INFOversion-misc: PVT SHIP S-ON
INFOserialno: ---
INFOimei: ---
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0714000
INFOcidnum: VODAP021
INFObattery-status: good
INFObattery-voltage: 4321mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-0e2a13e5
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Cheers and thanks in advance,
Azurewren
Click to expand...
Click to collapse
You can't use that guru reset rom to restore your phone, its way to old, your phone is running the 7.21.980.22 firmware so you would need a 7.21.980.2 or 7.21.980.22 guru reset rom and unfortunately there are no guru reset roms for 7.xx.xxx.x version. You can't make a guru reset rom from an ota update. ota updates are only patches, not the entire system and even if it would be possible to do it, you would have the same problem since the reset rom wouldn't match your firmware version.
Simply flash the 7.21.980.22 RUU using instructions from here
This will reset your phone back to 100% stock.

alray said:
Simply flash the 7.21.980.22 RUU using instructions from here
This will reset your phone back to 100% stock.
Click to expand...
Click to collapse
Many thanks on the link and info. I followed the instructions but got the following fail message
Code:
(bootloader) signature checking...
FAIL12 signature verify fail
FAILED (remote: 12 signature verify fail)
From my understanding this means there are issues with my bootloader version which is 1.61.0000. Is there anyway to change this, or an alternative file that corresponds with my hboot version?
Cheers

Azurewren said:
Many thanks on the link and info. I followed the instructions but got the following fail message
Code:
(bootloader) signature checking...
FAIL12 signature verify fail
FAILED (remote: 12 signature verify fail)
From my understanding this means there are issues with my bootloader version which is 1.61.0000. Is there anyway to change this, or an alternative file that corresponds with my hboot version?
Cheers
Click to expand...
Click to collapse
Is your bootloader still unlocked? It smust locked or relocked to flash the RUU.

alray said:
Is your bootloader still unlocked? It smust locked or relocked to flash the RUU.
Click to expand...
Click to collapse
Nope, it is relocked as per the instructions. The bootloader screen is as follows:
Code:
[COLOR="Black"]*** TAMPERED ***[/COLOR]
[COLOR="Magenta"]*** RELOCKED ***[/COLOR]
[COLOR="DarkGreen"]M7_UL PVT SHIP S-ON RH
HBOOT-1.61.0000
RADIO-4A.17.3250.14
OpenDSP-v35.120.274.0718
OS-7.21.980.22
eMMC-boot 2048MB
May 13 2015,01:15:11.27025[/COLOR]

Azurewren said:
Nope, it is relocked as per the instructions. The bootloader screen is as follows:
Code:
[COLOR="Black"]*** TAMPERED ***[/COLOR]
[COLOR="Magenta"]*** RELOCKED ***[/COLOR]
[COLOR="DarkGreen"]M7_UL PVT SHIP S-ON RH
HBOOT-1.61.0000
RADIO-4A.17.3250.14
OpenDSP-v35.120.274.0718
OS-7.21.980.22
eMMC-boot 2048MB
May 13 2015,01:15:11.27025[/COLOR]
Click to expand...
Click to collapse
Your phone was in booted in ruu mode (not in bootloader) when trying to flash the file (black screen with silver htc logo)?

alray said:
Your phone was in booted in ruu mode (not in bootloader) when trying to flash the file (black screen with silver htc logo)?
Click to expand...
Click to collapse
Yep, I followed the instructions you linked for me.

Azurewren said:
Yep, I followed the instructions you linked for me.
Click to expand...
Click to collapse
Can you confirm if the md5 value of your file is 23ed1efd43cda3a5a1a6363ee73ca9b4
You can download the required tool here: http://www.winmd5.com/

alray said:
Can you confirm if the md5 value of your file is 23ed1efd43cda3a5a1a6363ee73ca9b4
You can download the required tool here: http://www.winmd5.com/
Click to expand...
Click to collapse
Okay. Downloaded and verified. The file I am using has the same md5 value as what you commented up above.