Related
Hi.
I recently bought my s730. Quite pleased with it, but one thing bothers me.
When i connect to my wlan at home (zyxel_2602hw_d1a WPA-PSK TKIP) i'm able to connect to the router, but I don't seem to be able to get an connection to anywhere outside my own network. I tried using Live Messenger, IE, Opera and Skype, but nothing happens.
When I'm using GPRS or EDGE it all works smoothly.
Any suggestions?
Do you have your connection set to automatic or only through your phone network? I have seen a few problems with that.
Also, double check that you are entering wep or any other security protocol correctly, took my 6 tries before it would work, it looked like it was connected to the network but it really wasnt (just personal experience with this phone.)
10332007 said:
Do you have your connection set to automatic or only through your phone network? I have seen a few problems with that.
Also, double check that you are entering wep or any other security protocol correctly, took my 6 tries before it would work, it looked like it was connected to the network but it really wasnt (just personal experience with this phone.)
Click to expand...
Click to collapse
I do have the connection settings in both IE and Opera set to automatic. I's there somewhere else I have to change settings?
I'm quite sure i typed the password correctly. I also checked the client list on the router and the phone showed up correctly.
Gah, cant remember where I saw it but there was a setting in the phone itself for what to connect to.
Another thing to try under the wifi connection open your saved connection and go into it and see if you have it set to connect to the internet or just to the private network under "network type" in the Wi-Fi sub menu of Wlan settings. Its late and I cant think right, i'll see about checking more into it later...
I solved this problem - change your WLAN security on your WLAN router only on exactly MAC adressee (no any WEP) and your Wings is allowed to connect and all will be OK, work OK - Skype, IE, Opera. Problem was only to find MAC adressee my Wings
Wing + WRT54GL
Hi!
I have an S730 and a Linksys WRT54GL router. I've tried to use wlan with my phone, but it doesn't working. I want to use WPA2 with AES without Radius. Is the WPA shared key (router) same to network key(phone)? without security and encryption, it's working well.. I cannot see any syslog. That could be so easy..
klenovcok said:
I solved this problem - change your WLAN security on your WLAN router only on exactly MAC adressee (no any WEP) and your Wings is allowed to connect and all will be OK, work OK - Skype, IE, Opera. Problem was only to find MAC adressee my Wings
Click to expand...
Click to collapse
I tried removing security for my phone MAC address, but there dosn't seem to be any options on my router allowing this. So I'm still stuck;-/
ksga said:
Hi.
I recently bought my s730. Quite pleased with it, but one thing bothers me.
When i connect to my wlan at home (zyxel_2602hw_d1a WPA-PSK TKIP) i'm able to connect to the router, but I don't seem to be able to get an connection to anywhere outside my own network. I tried using Live Messenger, IE, Opera and Skype, but nothing happens.
When I'm using GPRS or EDGE it all works smoothly.
Any suggestions?
Click to expand...
Click to collapse
Did you check network settings? I mean e.g. if you don't use DHCP server and you didn't fill in right settings phone may connect to network but may not get outside. I know it can look like "lame" question, but sometimes even a master can do a newbie mistake..
ksga said:
I tried removing security for my phone MAC address, but there dosn't seem to be any options on my router allowing this. So I'm still stuck;-/
Click to expand...
Click to collapse
usually it is in section WLAN Advanced setup - WEP Encryption - disable and in WLAN MAC Filters - active + allow asotiation with table of adress your Wings - aply . I have Zyxel Prestige 660HW.
I'm sure that DHCP is active, and that I get an IP.
I tried disabling security on my router, but same problem. Connects to my router, gets an IP but still nothing works
ksga said:
I'm sure that DHCP is active, and that I get an IP.
I tried disabling security on my router, but same problem. Connects to my router, gets an IP but still nothing works
Click to expand...
Click to collapse
Your DNS are also provided automatically? Or could you ping (through some app) to any IP address of any server on the internet? If you succee, then we can look for a mistake with DNS.
Problem solved!!!
Okay. Found the cause for all my sufferings...
Power management. under WLAN-settings i changed power setting from power save mode to best performance...
thanks for all the help. hope next time I have a better question
wifi problem
hello everybody,i have tried several times to connect to my router at home but no chance at the end i got this warning saying:
cannot log on to the wireless network this network requires a personel certificate to positively identify you.
I am trying to hook to a public WIFI at work. The only issue is it requires a specific proxy.
So here is what I do and see happening:
Before attaching to network, I go into Connections and set up the proxy server for 'My Work Network'.
Then I go in and set up the Wireless Settings, and for Connects to I select Work. It connects to the wireless, but when I go into IE it will not connect to anything.
So with the connection up, I go back Settings/Connections, and My Work Network has nothing in it for a proxy for HTTP. I add it and save it. But I still do not connect to anything in IE.
Oh, and one other thing: I don't see how to tell if I am getting DNS server settigns. I can see what my IP and Default router are, but not DNS. I doubt this is my problem, but would be nice to see if I have a DNS server.
Any ideas?
Well, it seems to have resolved. Not sure why.
I do still interest in knowing how to determine the DNS settings.
I spoke too soon.
It has disappeared again. I am finding it inconsistent. Will soft resets affect this?
I still interest in feedback on this.
Another bit of information I just thought of, in case anyone has any ideas...
The time it worked, it had the pop-up acking which network to hook to, and I just ignored it, and it hooked to the public one, and it worked. The times it doesn't work, it hooks to the public network, but the pop-up doesn't come up.
Hoping for some ideas here...
This is a problem with WM 6.0. It's has been fixed a little bit in 6.1, but instead of the settings disappearing IE doesn't use the proxy settings.
My suggestion for now, GIVE up trying to use the proxy settings.
Arlop said:
My suggestion for now, GIVE up trying to use the proxy settings.
Click to expand...
Click to collapse
I guess this means I cannot use WIFI if a Proxy is required, which on anything other than strictly public, it ususally is.
This is a nasty bug in WM6. You could "temporarily" resolve this by doing the following reg hack. (After set the Proxy in control panel/Connections)
HKLM\Comm\Connmgr\Providers\{EF097F4C-DC4B-4C98-8FF6-AEF805DC0E8E}\HTTP-{18AD9FBD-F716-ACB6-FD8A-1965DB98B814}
Set key "Type" as 1 (DWORD)
After doing the above hack, enter the Connections then exist without doing anything. (To refresh the system, I suppose.)
After the refresh, you should be able to have PIE access outside network.
However, as soon as your ActiveSync works (via Wifi or USB) or you sometimes you enter the Connections again, the setting will be gone (not stick) and you need to reapply.
Hope this works
Thanks. I guess I'll suffer w/o it at work. That's too much of a pain in the butt. I synch a lot all day long.
I appreciate the input.
I supposed I'll be in for a hard reset/new rom one of these days on a MS update. Sounds like 6.1 is still not solid for this either.
For the proxy and ip settings, please try to use use my wifi profiles.
Your wlan network must connect to work.
RStein said:
For the proxy and ip settings, please try to use use my wifi profiles.
Your wlan network must connect to work.
Click to expand...
Click to collapse
Cool. I'll give them a try, and post back how it goes. Thanks!
RStein
I've installed the WiFi Profiles and have posted my status in your thread here at post 54.
For anyone following this, I have not been successful. The proxy disappers even with the profiles mentioned above.
He had not heard of the bug that makes them disapper, and has not had such complaints before with his software. Interesting.
He is on a 6.1 rom, and I'm on 6.0.
At any rate...still suffering no proxy.
FYI...here is another thread on this topic. It has helped some it seems, but not me.
Help!
I have a Netgear DG834T router as provided by Sky. I have one wired and two wireless connections running into it (let's call them WD, WL1 and WL2 respectively).
On the connections page I can see all of them under "attached devices"...but now I want to connect using my Kaiser (actually an O2 XDA Stellar)
What happens...
On the Kaiser, I get an IP address (assigned by DHCP) as normal - but can't access the internet - or at least, can only access it very rarely - http://www.google.com can't be found, but http://www.bbc.co.uk can. No idea why.
On the router, under "attached devices", not only can I NOT see the Kaiser, but WL1 and WL2 also disappear. WD remains visible. The router cannot ping the IP address of the Kaiser (timed out). If I disable WiFi on the Kaiser, then WL1 and WL2 are immediately visible again. Internet connection on WL1 and WL2 works, even when they are not visible.
I HAVE connected to this network before without any problems.
What the hooting heck is going on, and how do I fix it?
Thanks!
Time to troubleshoot! What happens with this phone on another wireless network. We need to determine if it's the phone or the network. Do you have any friends with a phone like this? Can you use their phone on your network? Do you have any ROMs flashed, has this phone ever been on the network without problems?
If the phone works on another router try looking for firmware updates for the router. Those things really do need to be updated often and it could have something to do with that.
Only have access to one network :-(. Might be a couple of weeks before I can access a hotel one or something like that.
Think next door neighbour has similar phone, but different provider...will try if he'll let me!
No ROMS flashed.
It connected fine when I first had it. As far as I know, I've changed nothing since then.
2 out of 4 answered...with an option on three...I'll get back to you as soon as I've beaten up my neighbour and stolen his phone...
Joke!
There should be somewhere you can go to test that wireless. I can walk outside the building I'm in and find one.
ChumleyEX said:
There should be somewhere you can go to test that wireless. I can walk outside the building I'm in and find one.
Click to expand...
Click to collapse
You = US, me = UK. We still think the biro is a recent invention...
Neighbour's phone on my network gives the exact same problem. I've also noticed that when I click "Renew IP" on the Kaiser it doesn't work...it gives me 0.0.0.0, but will occasionally flash up the correct IP address. It's alomst as if the connection is being lost and remade every few seconds. The status ist gives me is "associated to network"...is that different to "connected"?
I've been trying to solve this on my router, but none of the settings seem to make any difference.
Same here
I get the same with the router from sky.
Kaiser says I have an IP address, 192.168.0.5, but the it doesn't show up on the attached devices on the router.
What I find that works is hit renew IP maybe twice until you get a really wierd IP address like
169.254.*.**, actually not sure if I'm picking up another network, but for some reason I don't think I am.
I can then browse the web and sync via wifi.
Really pisses me of that it says that it has an IP address but doesn't connect.
1) Make sure you dont have a proxy set up on your wifi connection on your device.
2) The 169. address is your device getting an unauthorised IP address as the router did not receive the correct encryption key from the device.
3) You can check if its an encryption thing by simply logging in to the router (192.168.0.1 in your web browser on pc) and changing the settings to turn wpa off and testing it. The routers username and password are on the card - its something like "sky" and "admin"
Yeah I agree, there is something up with that router.
Grey Area said:
Neighbour's phone on my network gives the exact same problem. I've also noticed that when I click "Renew IP" on the Kaiser it doesn't work...it gives me 0.0.0.0, but will occasionally flash up the correct IP address. It's alomst as if the connection is being lost and remade every few seconds. The status ist gives me is "associated to network"...is that different to "connected"?
I've been trying to solve this on my router, but none of the settings seem to make any difference.
Click to expand...
Click to collapse
with my router.....i have to set the wifi power mode on my kaiser to "best performance", any other setting and i get that "associated to network" ****. been this way every since the hermes and the wizard.
unwired4 said:
1) Make sure you dont have a proxy set up on your wifi connection on your device.
2) The 169. address is your device getting an unauthorised IP address as the router did not receive the correct encryption key from the device.
3) You can check if its an encryption thing by simply logging in to the router (192.168.0.1 in your web browser on pc) and changing the settings to turn wpa off and testing it. The routers username and password are on the card - its something like "sky" and "admin"
Click to expand...
Click to collapse
No, proxy set-up as the device was bought unbranded in US.
Because there are issues with this router, encryption and media streaming devices, I have only restricted the mac addresses with no encryption.
Still don't know about the 169. ip address beacuse doesn't seem to come up as am ISP.
Now then, how wierd is this?
After all these issues and kind of giving up on it as a bad job, I also noticed that out on the road, my GPRS wasn't working either - TomTom couldn't connect to the "plus" traffic service.
I get on the phone to O2 who told me that my phone hadn't been "provisioned". After one false start where they didn't seem to do anything about it, I have just (literally) had them tell me to go to the O2 Operator settings and tell it to update the "O2 UK Post Pay_GPRS" and reboot.
GPRS now works. And magically, so does my WiFi - IP address negotiated and full access to internet and my router's setup page granted. Working like a charm again.
So - seems to me it's an account setting, and nothing to do with either me poor ol' router or me nice new phone.
For completeness, I was occasionally getting the 169 IP address too, so it sounds like we have EXACTLY the same problem - suggest you get onto your service provider ASAP.
ok, first of all, i checked every single thread on this page hoping to get a solution for my problem.
HTC Diamond, D-Link DWL-900AP+ Access Point.
My Diamond can "see" the Access Point, but is unable to connect with it.
Authentification WPA-PSK
Encryption TKIP
Networkkey Manually inserted and 100% correct.
Hook set at IEEE802.1x
EAP Typ = Smartcard or security certificate (but it's greyed out)
Network Card connects to Internet
From Server given IP Adress (hook set) DHCP on Access Point enabled
MAC Filters disabled
I also played around with the available network tabs.
I have vodafone DE, vodafone internet, company network or ISP
The the slider of the energy saving modus ist set to best performance.
What the hell is going wrong????
I also owe a HTC Touch Elfin and have no problems to access my network/internet.
Any suggestions would be highly appreciated
thank you
try deleting your network saved setting from list, make sure network card connects to internet, not work, find access point, and enter your password again.
this works for me in similar situations.
works if you start fresh, and not trying to connect with the same settings. i dont know why but has saved my ass a few times.
Also, try changing the encryption from TKIP to AES and see if that works....
I have the same problem! It's something about DHCP. My Diamond connects to my home wifi onli if I set the IP (which belongs to my phone on access point) address in the properties of network adapter.
HI did you try to put the host address of a site?
write 64.233.167.99 instead of google.it in case you can see the page the problem is the dns not resolved and insert manually in your phone connection
Marcellus_pnz said:
I have the same problem! It's something about DHCP. My Diamond connects to my home wifi onli if I set the IP (which belongs to my phone on access point) address in the properties of network adapter.
Click to expand...
Click to collapse
Same here, it looks like a DHCP time-out or routing problem. I've set up a DHCP server with a small pool of adresses on the acces point itself and now my Diamond always connects correctly. Before that, my Diamond would state that i had entered a invalid security key.
diamond connects but i cannot visit any website
Hi,
I have a similar problem. My diamond gets an ip address from dhcp, connects to dwl-900ap+ but i am not able to open any website (I tried to open some web with url and with its ip address too) - tried opera and IE too. In opera i get a "could not locate remote server" error. (Looks like a DNS problem?) I am not even able to open the AP's configuration web with diamond. Every other wifi enabled equipment I tried (1 notebook with win vista, 1 with XP, 1 with debian linux, nokia n95 with symbian and e-ten m700 with win mobile 5) works without a single problem. I also tried to reset the AP and my diamond - without success.
I didn't change any setting on the AP except for setting up a WEP encryption (i know, i know, it's not a strong encryption ), the SSID and the AP's ip address. Everything else is default. My dhcp server is not the access point. DHCP runs on a similarly configured router with wifi AP (diamond connects without problem).
Any idea/solution? thanks
Hi,
I'm trying to connect to a WiFi network that is protected with WPA2 with PEAP / TTLS.
It simply is not working. No problems connecting with my HTC Desire though.
Anybody experiencing the same bug? I already installed the required root certificates, tried various combinations of user account / password. The thing is, that the network is provided by my university (Eduroam if you are familiar with that) and it is very annoying that I have to fall back to HSDPA consuming my data quota.
Cheers,
chross
Normally with eduroam wifi there isn't wpa2 or other key. Just connect your phone to it, open your browser and you will be redirect to the website of your university and then you can log with your id.
Envoyé depuis mon XT890
Yes!! This is the exact same problem I'm having with my university wifi
http://forum.xda-developers.com/showpost.php?p=33962871&postcount=2
I'd configure the settings on my uni wifi choosing PEAP and then MSCHAPV2 and put in my log in username and password according to the instruction and as soon as press connect or save it looses the signal immediately to very low and never connects. We also have eduroam as an alternative they tried that and same problem just doesn't want to connect.
It works perfect on my htc one x. I'm beginning to believe the phone has a bug.
It does have a bug. It doesn't connect to 802.11 n!
My problem was solved by reconfiguring my AVW Fritz!Box 7270 to 802.11 b+g only and limit the phones wifi frequency to 2,4ghz only. You can find that in advanced wifi configuration.
I'm lucky i only recognized this bug in my own wifi network and not others i don't have admin rights for...
eduroam works for me with PEAP/TTLS but I guess it's 802.11g
I'm on the 40002 rom, but worked also on the 31006
After receiving the 4.0.4 update yesterday, WiFi now works flawlessly.
Cheers,
chross
Hi there,
I got the same problem with my university network in hamburg. I updated the razor to android 4.0.4 (Stock-Rom: 81.5.40002.XT890.Retail.en.EU), also the phone is rooted but still not working. Our IT advices to use WPA2 Enterprise TTLS/PAP authenthication in combination with a t-com root certificate. Every time i safe these setting the wifi signal drops as told by previous posters and the connection fails. When i enter the settingspage again, all settings are reverted to default. This also happens, while trying to connect to eduroam
any further advices?
Thanks in advance!
I have no problems connecting to eduroam at Braunschweig and other citys. Maybe you can visit the IT Desk at your university?
jagwar1 said:
I have no problems connecting to eduroam at Braunschweig and other citys. Maybe you can visit the IT Desk at your university?
Click to expand...
Click to collapse
Yep, me and and a fellow student went there and told them about the problem. But they also gave up, after trying about an hour or so. It seems to be a general problem in the used android build, at least there are a lot of post reporting this at the google code repo -> code.google. com /p/android/issues/detail?id=15631 (sorry for that but I'm to new here to post links). I'll try the provided tips like changing the wpa_suplicant file tomorrow and report the results. Seems to be strange issue, if it works for you (and probably others), because a fellow student got the same Phone and has the same issues
Thought I'd just give an update as I have the same issue
Motorola knows about it, it's been reported to them before and said it'll be fixed with the next update.
Working smooth here with WPA2-Enterprise, PEAP and MSCHAPv2. Using it every day.
But I'm not using TTLS, you might want to disable that if you don't have a valid certificate for your mobile/user.
Also important, fill out the "anonymous user" field with your username. Depending on the RADIUS configuration of your IT this might be required.
[edit]
Just checked my mobile. I don't use a Phase 2 authentication, only EAP = PEAP, no certificates.
Got it working!
After 2 hours of searching the web and playing around, I got it working now, following this guide posted on google code repo:
Razr I (XT890), retail eu, running android 4.0.4 (stock), no root
after endless hours of trying i was able to connect to my university network a couple of minutes ago with the combination of two apps.
1. WiFi Connection Manager
Enter SSID manually
Security "802.1x EAP"
EAP Method "PEAP"
Phase 2 authentication "MSCHAPV2"
Identity "your identity"
Anonymous identity "your identity"
password "your password".
2. WiFi Advanced Configuration Editor
Check Hidden SSID
Key Management: unselect IEEE8021X, select WPA_EAP
AUTH Protocols: select LEAP
Enterprise configuration: make sure Identity and Anonymous Identity are set to your identity, Enter your password
check whether the settings are saved in WIFI Advanced Configuration Editor. If not switch of stock WiFi and repeat step 2 (!!!). Now it should work.
Turn WiFi on and connect to network (Stock WiFi; don't care about settings there, phase 2 authentification is still not saved)
After switching the device off and back on it did still work. Same when leaving and returning to WiFi area.
hopefully it will keep on working. i just tested the browser and play store. didn't discover any problems so far.
Click to expand...
Click to collapse
Connection is stable, but there seem to be some problems regarding to the speed. Whatever it's usable for stuff you do regularly @university.
Hope that helps others, thanks to klemens
hey.qb said:
Hope that helps others, thanks to klemens
Click to expand...
Click to collapse
Thank you for sharing, this made me so happy!
It's those two apps which made my connection possible.
My eduroam configuration is quite different, but the apps did the trick. I fiddled with advanced wifi config editor alone for hours without any result.
Now I just hammered the config into those two apps and what can I say - proxydroid reported a connection a few seconds later.
I dont't know what Moto's Problem with 802.1X is.
Defy latest stock rom - no connection. With CM -> no problem.
Milestone 2 with stock rom - no connection. With CM -> no Problem.
Rarz I no connection with stock wifi manager . . .
My fellow students with their samsung devices seem so have no problem at all. ^^
(even Win Mobile 6 works, thats a little bit depressing)
btw, speed is fine here. 16Mbit up&down is more than I need on a phone.
Greetings from Kiel.