Hey Guys,
I am currently looking to set my phone back to Stock/Out of box, to send in to retailer for repairs (Warranty). I would greatly appreciate it if anyone could help me.
I am about to follow this guide http://htc-one.wonderhowto.com/how-to/return-your-rooted-unlocked-htc-one-back-factory-settings-for-warranty-repairs-0149204/
All of my backup data, was on an external hard-drive which became corrupted, However as I have previously posted my Getvar details, before flashing any CFW... So I have managed to retrieve my original version and CID ect. (Thanks to XDA )
I was firstly going to Change my CID back to it's original state and then follow the guide further...
However I can not find the Correct RUU file for my version?
Phone Info (Current State):
*Bootloader Unlocked
*S-Off
*Rooted
*SuperCID (11111111) - Enabled
*Recovery In Use - (openrecovery-twrp-2.6.3.4-m7ul.img)
Current Getvar:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA************
(bootloader) imei: 35**************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3701mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Stock Getvar
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA*************
(bootloader) imei: 35*************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4073mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I am also currently on EE network
Best Wishes
Danny
dannybbb said:
Hey Guys,
I am currently looking to set my phone back to Stock/Out of box, to send in to retailer for repairs (Warranty). I would greatly appreciate it if anyone could help me.
I am about to follow this guide http://htc-one.wonderhowto.com/how-to/return-your-rooted-unlocked-htc-one-back-factory-settings-for-warranty-repairs-0149204/
All of my backup data, was on an external hard-drive which became corrupted, However as I have previously posted my Getvar details, before flashing any CFW... So I have managed to retrieve my original version and CID ect. (Thanks to XDA )
I was firstly going to Change my CID back to it's original state and then follow the guide further...
However I can not find the Correct RUU file for my version?
Phone Info (Current State):
*Bootloader Unlocked
*S-Off
*Rooted
*SuperCID (11111111) - Enabled
*Recovery In Use - (openrecovery-twrp-2.6.3.4-m7ul.img)
Current Getvar:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA************
(bootloader) imei: 35**************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3701mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Stock Getvar
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA*************
(bootloader) imei: 35*************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4073mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I am also currently on EE network
Best Wishes
Danny
Click to expand...
Click to collapse
follow nkk71's guide linked in my signature, not that guide you have linked.
basically, youll have to revert your cid back to htc__001 and then flash the 1.28.401 ruu. if you want to s-on, do it while still on hboot 1.44 or 1.54
OK firstly, Thank you very much for you reply...
I have read the thread, and still have a small amount of confusion/doubt as to what I need to do.
Here is what I am planning to do:
Step 1:
Open command prompt in fastboot directory
fastboot oem writecid HTC__001
fastboot reboot-bootloader
(Confirm CID has updated)
Step 2: Remove TAMPERED Banner
adb devices
adb shell
echo -ne '\x00' | dd of=/dev/block/mmcblk0p7 bs=1 seek=4265988
echo -ne '\x00\x00\x00\x00' | dd of=/dev/block/mmcblk0p3 bs=1 seek=33796
exit
Step 3:
in recovery, "install zip" -> "choose zip" -> and select "Guru_Bootloader_Reset_1.0"
go through the installer and select "Remove TAMPERED" and "LOCK Bootloader";
once finished: continue with
adb reboot bootloader, and confirm no TAMPERED and LOCKED status
Step 4: ??????
Additional info: RUU EXE Reads - You may need to flash hboot 1.44 before the RUU will install. S-Off Required. Download - 1.29.401.12_hboot_1.44 http://www.htc1guru.com/dld/ruu_m7_ul_jb_50_htc_europe_1-28-401-7_radio_4a-13-3231-27_10-31-1131-05_release_310878_signed-exe/
But RUU ZIP - Does not mention 1.29.401.12_hboot_1.44 at all http://www.htc1guru.com/dld/ruu-zip-m7_ul_jb_50_htc_europe_1-28-401-7_radio_4a-13-3231-27_10-31-1131-05_release_310878_signed-zip/
I am restoring via RUU.zip: I need to be S-On for warranty purposes, So the confusion I have is do I
A: Flash RUU 1.29.401.12_hboot_1.44 - First in order to downgrade the HBOOT from 1.55 and gain S-ON?
B:Just flash RUU 1.28.401.7 and attempt S-On
C:Flash RUU 1.29.401.12_hboot_1.44 , Gain S-On, Then flash RUU 1.28.401.7
fastboot oem rebootRUU
fastboot flash zip ruu.zip (TBC)
fastboot flash zip ruu.zip (TBC)
fastboot reboot-bootloader
Step 5 Gain S-On
fastboot oem writesecureflag 3
Reboot 3 Times
No further steps required, Os should be bootable and returned to stock - Is this correct
Thanks
dannybbb said:
OK firstly, Thank you very much for you reply...
I have read the thread, and still have a small amount of confusion/doubt as to what I need to do.
Here is what I am planning to do:
Step 1:
Open command prompt in fastboot directory
fastboot oem writecid HTC__001
fastboot reboot-bootloader
(Confirm CID has updated)
this is good
Step 2: Remove TAMPERED Banner
adb devices
adb shell
echo -ne '\x00' | dd of=/dev/block/mmcblk0p7 bs=1 seek=4265988
echo -ne '\x00\x00\x00\x00' | dd of=/dev/block/mmcblk0p3 bs=1 seek=33796
exit
not needed because it will be done at step 3 using the guru bootloader reset tool
Step 3:
in recovery, "install zip" -> "choose zip" -> and select "Guru_Bootloader_Reset_1.0"
go through the installer and select "Remove TAMPERED" and "LOCK Bootloader";
once finished: continue with
adb reboot bootloader, and confirm no TAMPERED and LOCKED status
Step 4: ??????
download the 1.28.4017 ruu.zip from here: http://www.htc1guru.com/dld/ruu-zip...1-27_10-31-1131-05_release_310878_signed-zip/ and save it in the same folder you have adb and fastboot on your computer. rename the file "ruu" ("ruu.zip")
Additional info: RUU EXE Reads - You may need to flash hboot 1.44 before the RUU will install. S-Off Required. Download - 1.29.401.12_hboot_1.44 http://www.htc1guru.com/dld/ruu_m7_ul_jb_50_htc_europe_1-28-401-7_radio_4a-13-3231-27_10-31-1131-05_release_310878_signed-exe/
not needed if using the 1.28.401.7 ruu.zip
But RUU ZIP - Does not mention 1.29.401.12_hboot_1.44 at all http://www.htc1guru.com/dld/ruu-zip-m7_ul_jb_50_htc_europe_1-28-401-7_radio_4a-13-3231-27_10-31-1131-05_release_310878_signed-zip/
I am restoring via RUU.zip: I need to be S-On for warranty purposes, So the confusion I have is do I
A: Flash RUU 1.29.401.12_hboot_1.44 - First in order to downgrade the HBOOT from 1.55 and gain S-ON?
B:Just flash RUU 1.28.401.7 and attempt S-On <----- change cid, lock and remove tampered from bootloader using the guru tool, flash ruu and finally s-on
C:Flash RUU 1.29.401.12_hboot_1.44 , Gain S-On, Then flash RUU 1.28.401.7
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip
fastboot reboot-bootloader
Step 5 Gain S-On
fastboot oem writesecureflag 3
Reboot 3 Times
No further steps required, Os should be bootable and returned to stock - Is this correct
correct
Thanks
Click to expand...
Click to collapse
read the quote above with comments in red. follow steps in guide with what commented above and you'll be fine
alray said:
read the quote above with comments in red. follow steps in guide with what commented above and you'll be fine
Click to expand...
Click to collapse
Thank you, I will give it a go now... and let you know
Rather than creating a new thread, I think I would like to hijack this thread for a while with a question regarding RUU.
@alray I have been unable to flash RUU.exe on my HTC One which seems to be giving the errors:
Error 170
Error 155
HTC_Fastboot.exe stopped working
I have in the past been able to flash the same RUU for the same phone without any issues. My phone is S-Off already and I am using a USB 2.0 port (also tried with the 3.0).
Tried in 2 different PC's (Win 8 and Win 7) Any recommendation?
Thanks
fareed_xtreme said:
Any recommendation?
Click to expand...
Click to collapse
yes
post the output of fastboot getvar all (except imei/sn)
what ruu are you using exactly? (complete file name please)
btw
error 170 = usb error, either because of a bad usb cable, bad usb port, driver issues
error 155 = image error, either because you are not using the right ruu for your phone (to determine with the getvar all), or because your hboot version is higher than the one in the ruu. in that case, you must downgrade hboot prior to running the ruu.exe. Using ruu.zip avoids that kind of issue because zip ruu doesnt check for bootloader version.
fareed_xtreme said:
Rather than creating a new thread, I think I would like to hijack this thread for a while with a question regarding RUU.
@alray I have been unable to flash RUU.exe on my HTC One which seems to be giving the errors:
Error 170
Error 155
HTC_Fastboot.exe stopped working
I have in the past been able to flash the same RUU for the same phone without any issues. My phone is S-Off already and I am using a USB 2.0 port (also tried with the 3.0).
Tried in 2 different PC's (Win 8 and Win 7) Any recommendation?
Thanks
Click to expand...
Click to collapse
Is it showing in adb / fastboot devices?
*edit*
alray said:
yes
post the output of fastboot getvar all (except imei/sn)
what ruu are you using exactly? (complete file name please)
btw
error 170 = usb error, either because of a bad usb cable, bad usb port, driver issues
error 155 = image error, either because you are not using the right ruu for your phone (to determine with the getvar all), or because your hboot version is higher than the one in the ruu. in that case, you must downgrade hboot prior to running the ruu.exe. Using ruu.zip avoids that kind of issue because zip ruu doesnt check for bootloader version.
Click to expand...
Click to collapse
I have tried the following RUU's:
RUU M7 UL K44 SENSE55 MR HTC Europe 4.19.401.9 R Radio 4A.23.3263.28 10.38r.1157.04L Release 353069 Signed 2-1
RUU M7 UL JB 50 HTC Europe 1.20.401.1 Radio 4A.13.3227.06 10.27.1127.01 Release 308001 Signed 2 4
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: [COLOR="Silver"]REMOVED[/COLOR]
(bootloader) imei: [COLOR="Silver"]REMOVED[/COLOR]
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4319mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.066s
Furthermore, in regards to the Error 170 of the USB, it comes after the HTC_Fastboot.exe crashes. I have already tried 3 different USB Cables (Brand New Original cables were used 1. Samsung, 2. Sony, 3. HTC)
dannybbb said:
Is it showing in adb / fastboot devices?
Click to expand...
Click to collapse
Yes, it shows my device Serial Number and the device. No issues at all.
fareed_xtreme said:
I have tried the following RUU's:
RUU M7 UL K44 SENSE55 MR HTC Europe 4.19.401.9 R Radio 4A.23.3263.28 10.38r.1157.04L Release 353069 Signed 2-1
RUU M7 UL JB 50 HTC Europe 1.20.401.1 Radio 4A.13.3227.06 10.27.1127.01 Release 308001 Signed 2 4
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: [COLOR="Silver"]REMOVED[/COLOR]
(bootloader) imei: [COLOR="Silver"]REMOVED[/COLOR]
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4319mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.066s
Furthermore, in regards to the Error 170 of the USB, it comes after the HTC_Fastboot.exe crashes. I have already tried 3 different USB Cables (Brand New Original cables were used 1. Samsung, 2. Sony, 3. HTC)
Yes, it shows my device Serial Number and the device. No issues at all.
Click to expand...
Click to collapse
1.20.401.1 RUU is a pre-release ruu. Don't try to flash this one, there is no ota update for that version and you'll be stock on 1.20.401.1 forever.
4.19.401.9 ruu.exe is a lower version than your phone so it will require to downgrade the hboot 1st.
Im not sure about the HTC_fastboot.exe error
Since you are s-off, what i recommend you is to use the 1.28.401.7 ruu.zip.
http://www.htc1guru.com/dld/ruu-zip...1-27_10-31-1131-05_release_310878_signed-zip/
save the file in your adb/fastboot folder and rename it "ruu" ("ruu.zip"). reboot phone in bootloader mode and open a command prompt from your adb/fastboot folder
Code:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip
fastboot reboot
then download and install each ota from settings --> about ---> software updates
alray said:
1.20.401.1 RUU is a pre-release ruu. Don't try to flash this one, there is no ota update for that version and you'll be stock on 1.20.401.1 forever.
4.19.401.9 ruu.exe is a lower version than your phone so it will require to downgrade the hboot 1st.
Im not sure about the HTC_fastboot.exe error
Since you are s-off, what i recommend you is to use the 1.28.401.7 ruu.zip.
http://www.htc1guru.com/dld/ruu-zip...1-27_10-31-1131-05_release_310878_signed-zip/
save the file in your adb/fastboot folder and rename it "ruu" ("ruu.zip"). reboot phone in bootloader mode and open a command prompt from your adb/fastboot folder
Code:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip
fastboot reboot
then download and install each ota from settings --> about ---> software updates
Click to expand...
Click to collapse
Thanks. I am sure the Zip has to work as firmware etc was able to flash.. I will confirm later when I try it.
fareed_xtreme said:
Thanks. I am sure the Zip has to work as firmware etc was able to flash.. I will confirm later when I try it.
Click to expand...
Click to collapse
don't forget this ruu will flash everything on the phone including the firmware so hboot will be downgraded to 1.44. Make sure you are not using a windows 8.1 computer because fastboot doesnt work with 8.1 and 1.44 so the ruu will not flash completely if you are using windows 8.1
damn man ı wanna be free
Related
Hi ,
I am noob .
I am unable to lock and unroot HTC one back to stock condition.
the output of "fastboot getvar all' is :
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.707.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA369W920997
(bootloader) imei: xxxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 4052mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.116s
I am familiar with the basics of rooting ..
I am from India and unable to find the RUU for my cidnum : HTC__038" .
Please help me.
I want to to restore the device in Stock Condition without bricking it .
Right now its on HTC Sense 5 . Rooted Android 4.3
Thanks
popper1987 said:
Hi ,
I am noob .
I am unable to lock and unroot HTC one back to stock condition.
the output of "fastboot getvar all' is :
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-main: 2.24.707.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_u
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__038
Thanks
Click to expand...
Click to collapse
There's an RUU zip for your MID & CID here: http://www.htc1guru.com/dld/ruu-zip...0-01_release_312087_signed_2_4_decrypted-zip/
But you'll need to S-Off in order to be able to downgrade.
Anyway, why bother going back to stock?
going back on stock coz of speaker issues and want to get it fixed in warranty .
Can you Please tell me how to S-OFF it safely .
Thanks
popper1987 said:
going back on stock coz of speaker issues and want to get it fixed in warranty .
Can you Please tell me how to S-OFF it safely .
Thanks
Click to expand...
Click to collapse
you need to use http://rumrunner.us/
but first flash a compatible rom, i would suggest you try this one: http://www.htc1guru.com/dld/guru_reset_m7_2-24-707-1-zip/ and see if it works.
you need to enable ROOT in the installer, and I would suggest unselecting "stock recovery", and also do a WIPE.
then use rumrunner to get s-off
Once S-Off, remove tampered and set your phone locked (not relocked), you can use this: http://forum.xda-developers.com/showthread.php?t=2527194
then you need to flash the zip in ruu mode, so in bootloader/FASTBOOT USB:
fastboot oem rebootRUU
fastboot flash zip <name of ruu>.zip
fastboot flash zip <name of ruu>.zip <- YES TWICE, first one will report "failed push again", second one should report success
fastboot reboot
and you should be completely back to stock.
Hit the thanks button if i've helped
I'm freaking out a little bit. I was in the middle of trying to restore to stock. I got s-on back and locked the bootloader. Now I'm stuck on the bootloader. No matter what I press, it goes back to the bootloader. Adb no longer lists any devices connected to the pc. I can't get any of the RUU's I have downloaded to even open. Any ideas? Should the RUU be the next step?
I'm on xp
Bradlees said:
I'm freaking out a little bit. I was in the middle of trying to restore to stock. I got s-on back and locked the bootloader. Now I'm stuck on the bootloader. No matter what I press, it goes back to the bootloader. Adb no longer lists any devices connected to the pc. I can't get any of the RUU's I have downloaded to even open. Any ideas? Should the RUU be the next step?
I'm on xp
Click to expand...
Click to collapse
1- why did you s-on? Always keep s-off unless you send your phone for repair under warranty.
2- adb can't work from bootloader only fasboot, so ''fastboot devices'' should list your phone.
3- post the output of ''fastboot getvar all'' except IMEI so we can determine if you can use a ruu.
4- which ruu are you trying to flash?
alray said:
1- why did you s-on? Always keep s-off unless you send your phone for repair under warranty.
2- adb can't work from bootloader only fasboot, so ''fastboot devices'' should list your phone.
3- post the output of ''fastboot getvar all'' except IMEI so we can determine if you can use a ruu.
4- which ruu are you trying to flash?
Click to expand...
Click to collapse
If trying to turn my phone in for an upgrade, hence the return to factory.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.03
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.24.531.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3755mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-412e361e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I'm trying to download the tmobile us RUU I got off the link in here.
Bradlees said:
If trying to turn my phone in for an upgrade, hence the return to factory.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.03
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.24.531.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA3*******
(bootloader) imei: xxxxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3755mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-412e361e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I'm trying to download the tmobile us RUU I got off the link in here.
Click to expand...
Click to collapse
Edit out your serial no above ..
I posted this RUU for someone yesterday ..here's the link to the rom.zip
https://www.dropbox.com/s/mql8sas0udb1427/rom.zip
copy the file to your fastboot folder and flash it with fastboot
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip << yes two times
fastboot reboot
clsA said:
Edit out your serial no above ..
I posted this RUU for someone yesterday ..here's the link to the rom.zip
https://www.dropbox.com/s/mql8sas0udb1427/rom.zip
copy the file to your fastboot folder and flash it with fastboot
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip << yes two times
fastboot reboot
Click to expand...
Click to collapse
Success! You saved me.
If I could hit the thanks button more, I would.
Bradlees said:
Success! You saved me.
If I could hit the thanks button more, I would.
Click to expand...
Click to collapse
it's no problem .. like i said i just posted it for another guy yesterday so it was fresh on my mind
hi,
i got htc one m7ul phone. it was s-off but with locked bootloader.
so i unlocked it successfully n then i tried to flash latest firmware. 6.09.401.5
after successful flashing i reboot phone and ended up with htc logo and 4 triangles at each corner.
i cant access my phone.
cant boot into bootloader however i can use basic adb commands
here is info regarding the phone
C:\Users\Dell-Win 7\Desktop\toolkit>fastboot get
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.708.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ********
(bootloader) imei: ************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN071****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4228mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-01dc707e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.073s
what can be done??
can i install ruu directly n get to stock??
please guide me what i did wrong?
i want to install arhd 81
with modified hboot with no red warning thank u
chdpiyush said:
hi,
i got htc one m7ul phone. it was s-off but with locked bootloader.
so i unlocked it successfully n then i tried to flash latest firmware. 6.09.401.5
after successful flashing i reboot phone and ended up with htc logo and 4 triangles at each corner.
i cant access my phone.
cant boot into bootloader however i can use basic adb commands
here is info regarding the phone
C:\Users\Dell-Win 7\Desktop\toolkit>fastboot get
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.708.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ********
(bootloader) imei: ************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN071****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4228mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-01dc707e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.073s
what can be done??
can i install ruu directly n get to stock??
please guide me what i did wrong?
i want to install arhd 81
with modified hboot with no red warning thank u
Click to expand...
Click to collapse
umm... fastboot is working try to get in flashRUU mode!
1: fastboot oem rebootRUU
2: if working flash RUU zip that you prefer but not 6.X.X because this is only update, don't exist a full stock ruu of 6.x.x (i think). the comand is: fastboot flash zip xxx.zip
when i do step 1 i end up with htc logo and 4 triangles at each corner
now i m downloading ruu.exe and changed cid to d required cid for the ruu
will try to flash n check what happens
Godric8 said:
umm... fastboot is working try to get in flashRUU mode!
1: fastboot oem rebootRUU
2: if working flash RUU zip that you prefer but not 6.X.X because this is only update, don't exist a full stock ruu of 6.x.x (i think). the comand is: fastboot flash zip xxx.zip
Click to expand...
Click to collapse
i think i can do ruu.exe as its s-0ff or any suggestion u want to give?
chdpiyush said:
i think i can do ruu.exe as its s-0ff or any suggestion u want to give?
Click to expand...
Click to collapse
find a decrypted RUU you want and edit the android_info.txt to match your MID / CID Flash in fastboot oem rebootRUU
if your goal is to get OTA updates you should choose the International Version and change your MID and CID to match one of those then use the .401 RUU
modelid: PN0710000
cid: HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
HTC__016
Click to expand...
Click to collapse
This should update to 6.xx.401.x
http://www.htc1guru.com/dld/ruu-zip...0-01_release_318486_signed_2_4_decrypted-zip/
Problem solved. Phone was stuck in ruu mode with HTC logo n 4 triangles on each corner. It solved after I flashed firmware which came with 4.3 version. N fixed. May b something to do with firmware flash. Phone was on stock 4.3 before unlocking boot loader n flashing latest 4.4.3 firmware.
Sent from my HTC One using XDA Free mobile app
Hi guys,
For 5 weeks I've been trying to upgrade my phone to 5.0.2 and nothing works. All I've managed to do is go from 4.4.2 down to 4.2.2 and now I'm stuck here. I've tried RUUs, I've tried fastboot zips, everything fails.
Right now I've got 4.2.2 TWRP, and s-off and this from getvar:
bootloader: 1.54.0000
baseband: 4a.17.3250.14
main 2.24.206.7
cidnum: 11111111
I just want to go back to stock to get OTAs.
Can someone please help me? I've watched so many YouTube videos and read so many threads but nothing has worked. I just keep digging a deeper hole.
download the stock firmware for your phone and flash it with odin
anfalanl said:
download the stock firmware for your phone and flash it with odin
Click to expand...
Click to collapse
Odin? Isn't that for Samsung phones?
SJWackness said:
Hi guys,
For 5 weeks I've been trying to upgrade my phone to 5.0.2 and nothing works. All I've managed to do is go from 4.4.2 down to 4.2.2 and now I'm stuck here. I've tried RUUs, I've tried fastboot zips, everything fails.
Right now I've got 4.2.2 TWRP, and s-off and this from getvar:
bootloader: 1.54.0000
baseband: 4a.17.3250.14
main 2.24.206.7
cidnum: 11111111
I just want to go back to stock to get OTAs.
Can someone please help me? I've watched so many YouTube videos and read so many threads but nothing has worked. I just keep digging a deeper hole.
Click to expand...
Click to collapse
Post the output of "fastboot getvar all" (remove imei and serialno)
"everything fails": can you be more precise please? Sometime it will fail for a simple reason, but without knowing the exact error its hard to tell you why it failed...
---------- Post added at 06:15 PM ---------- Previous post was at 06:12 PM ----------
anfalanl said:
download the stock firmware for your phone and flash it with odin
Click to expand...
Click to collapse
Hummm, no
donkeykong1 said:
Odin? Isn't that for Samsung phones?
Click to expand...
Click to collapse
^^
This is output of getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.206.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxx
(bootloader) imei: xxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3849mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I'f tried using different RUUs (206s and 401s) to get to 4.4.2 but it always fails. The furthest I got was a RUU getting stuck at "Checking Headers ....5%". It sat there for 30 minutes a few different times.
I've tried installing an OTA zip for 5.0.2 (when I was on 4.4.2) through TWRP but that didn't work either.
So I got S-Off and tried all of these again. Still not working.
Ideally what I want is a clean Sense 6 install of 5.0.2 with the latest firmware.
Any help would be very much appreciated. Thanks in advance.
I'm also getting this error from a few RUUs:
An error (-5001 : 0x80070002) has occurred while running the setup.
I've rebooted and run the RUU again and it says the same.
SJWackness said:
This is output of getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.206.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxx
(bootloader) imei: xxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3849mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I'f tried using different RUUs (206s and 401s) to get to 4.4.2 but it always fails. The furthest I got was a RUU getting stuck at "Checking Headers ....5%". It sat there for 30 minutes a few different times.
I've tried installing an OTA zip for 5.0.2 (when I was on 4.4.2) through TWRP but that didn't work either.
So I got S-Off and tried all of these again. Still not working.
Ideally what I want is a clean Sense 6 install of 5.0.2 with the latest firmware.
Any help would be very much appreciated. Thanks in advance.
Click to expand...
Click to collapse
SJWackness said:
I'm also getting this error from a few RUUs:
An error (-5001 : 0x80070002) has occurred while running the setup.
I've rebooted and run the RUU again and it says the same.
Click to expand...
Click to collapse
update your firmware to 7.19.401.2 then flash the 7.19.401.22 ruu. You must use htc_fastboot.exe to flash the ruu <--- important. Save htc_fastboot.exe, the 7.19.401.2 firmware and the 7.19.401.22 ruu in the same folder you have adb.exe and fastboot.exe on your computer.
Code:
fastboot oem rebootRUU
fastboot flash zip M7_UL_Firmware_7.19.401.2.zip
fastboot flash zip M7_UL_Firmware_7.19.401.2.zip
fastboot reboot-bootloader
htc_fastboot oem rebootRUU
htc_fastboot flash zip PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.22_Radio_4T.35.3218.16_10.33Q.1718.01L_release_430964_signed.zip
htc_fastboot reboot
First boot can take longer than usual (stuck at HTC splash screen) just wait it will boot eventually.
alray said:
update your firmware to 7.19.401.2 then flash the 7.19.401.22 ruu. You must use htc_fastboot.exe to flash the ruu <--- important. Save htc_fastboot.exe, the 7.19.401.2 firmware and the 7.19.401.22 ruu in the same folder you have adb.exe and fastboot.exe on your computer.
Code:
fastboot oem rebootRUU
fastboot flash zip M7_UL_Firmware_7.19.401.2.zip
fastboot flash zip M7_UL_Firmware_7.19.401.2.zip
fastboot reboot-bootloader
htc_fastboot oem rebootRUU
htc_fastboot flash zip PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.22_Radio_4T.35.3218.16_10.33Q.1718.01L_release_430964_signed.zip
htc_fastboot reboot
First boot can take longer than usual (stuck at HTC splash screen) just wait it will boot eventually.
Click to expand...
Click to collapse
THANKS A MILLION! It looks like it's updated! Cheers!!
This is the status of my htc one m7 phone
***tampered***
***relocked***
S=on
Getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.401.22
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: -
(bootloader) imei: -
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4278mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.109s
I am familair with the commands adb etc.
After tray to unlock my phone the bootloader freeze. So i am unable to unlock my phone. Will you give me the advice to help to restore my recovery. However i downdload the PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.2_Radio_4T.35.3218.16_10.33Q.1718.01L_release_421790_signed.zip. (MD5 checked! ) Will you confirm if this is the correct file through flash this file with command oem RUU.
Please there is many information reagarding this issue. so please help me further....
Hamstra said:
This is the status of my htc one m7 phone
***tampered***
***relocked***
S=on
Getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.401.22
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: -
(bootloader) imei: -
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4278mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.109s
I am familair with the commands adb etc.
After tray to unlock my phone the bootloader freeze. So i am unable to unlock my phone. Will you give me the advice to help to restore my recovery. However i downdload the PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.2_Radio_4T.35.3218.16_10.33Q.1718.01L_release_421790_signed.zip. (MD5 checked! ) Will you confirm if this is the correct file through flash this file with command oem RUU.
Please there is many information reagarding this issue. so please help me further....
Click to expand...
Click to collapse
7.19.401.2 can't be flashed on your phone since your version is 7.19.401.22 (downgrading requires S-OFF, your phone is S-ON). So you need the 7.19.401.22 RUU but I would try to flash only the 7.19.401.22 firmware before flashing a RUU.
Code:
fastboot oem rebootRUU
fastboot flash zip 7.19.401.22.zip
fastboot flash zip 7.19.401.22.zip
fastboot reboot-bootloader
fastboot flash unlocktoken Unlock_code.bin
alray said:
7.19.401.2 can't be flashed on your phone since your version is 7.19.401.22 (downgrading requires S-OFF, your phone is S-ON). So you need the 7.19.401.22 RUU but I would try to flash only the 7.19.401.22 firmware before flashing a RUU.
Code:
fastboot oem rebootRUU
fastboot flash zip 7.19.401.22.zip
fastboot flash zip 7.19.401.22.zip
fastboot reboot-bootloader
fastboot flash unlocktoken Unlock_code.bin
Click to expand...
Click to collapse
Many thanks!! Very usefull!
To be sure. Where can I download the firmware 7.19.401.22 .
Hamstra said:
Where can I download the firmware 7.19.401.22 .
Click to expand...
Click to collapse
You might want to read my previous post again lol...
download the firmware 7.19.401.22 and unlock bootloader!
TWRP installed.
Can i restore my backup trough TWRP?
Hamstra said:
download the firmware 7.19.401.22 and unlock bootloader!
TWRP installed.
Can i restore my backup trough TWRP?
Click to expand...
Click to collapse
Flashed TWRP 2.8.6.0 STARTING in recovery!.
Found in Windows explorer storage HTC one full 25gig, no free space. Only files from TWRP(?).
Delete unnecessary files, only left the resent backup (TRWP)
Restore backup.
Done!
Hamstra said:
Flashed TWRP 2.8.6.0 STARTING in recovery!.
Found in Windows explorer storage HTC one full 25gig, no free space. Only files from TWRP(?).
Delete unnecessary files, only left the resent backup (TRWP)
Restore backup.
Done!
Click to expand...
Click to collapse
Sorry for the late answer and not answering your PM, I was away for the weekend. Is everything fine now?