Related
Hi. I was abe to update my tab with gb. However, in using 3G, i cant access the market. I always receive a 'network error' message. Any idea what to do? Thanks.
Try accessing it through wifi. Only market is not working?
Sent from my GT-P1000 using XDA Premium App
smahmood143 said:
Try accessing it through wifi. Only market is not working?
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
The market is ok on wifi. In 3G, i can browse the net, but not the market. It always gives me the network error. Any idea why?
I get the same exact thing -- It looks like the 3g is actually disabled when the android market is open. The 3g logo actually disappears from the task bar when the market is open. I have to go in and kill the market in the task manager to get the 3g working again. It is really annoying. I am on AT&T if that matters.
The AT&T tech rep I spoke to told me that I would have to call Samsung. (I'm having the same problem with my Galaxy Tab).
i finally got my market working in gingerbread thru 3G! thanks to noxxious for the great help!
try this procedure:
1. backup your data and apps, and your network's apn settings
2. get the sec_csc JQ1.zip from this thread: http://forum.xda-developers.com/showthread.php?p=13936755#post13936755 (post no. 47) and unzip it.
3. overwrite the csc folder in /system with the csc folder you got from step 3 (use root explorer)
4. using your dialpad, enter *#272*your_tab_IMEI#.
5. select "XTC" and press "install" (XTC is the international sales code that works on any country).
6. step 5 will wipe your data. if it fails, then switch off your tab and go to recovery mode (press the "on" key and volume up key at the same time).
7. select "wipe data".
8. when your tab restarts, it will propmt you again for setup (your sim card should be in the tab). when you're asked to connect to packet data, click the checkbox next to it. after setup, when i checked the settings\mobile network\apn settings, the tab automatically created the apn settings for me (if not, then manually create apn settings). switch on 3G and access the market!
it worked for me! hope it works for you, too!
This is GREAT ! I had the same problem before and now it"s fixed !
THANKS to noxxious and to vince_junior ! ! !
Market Update
Does the above solution work even after the update to the Android Market is applied? Obviously, wiping the tab will return it to the default apps, including Market.
I can go in to the "App" manager and uninstall the Market update and then it works on 3g but as soon as the update reinstalls (automatically), then the 3g is disabled again.
Thanks
Strange. I have the stock gingerbread but i don'have that problem over 3G. Vodafone in my country have 2 diffrent data plan, "Mobile Internet" where i have no problem with anything, and "Internet on Mobile" where i can browse over the web, but i can't receive calls from Viber or Tango. Those 2 apps work great on " Mobile Internet", so maybe is your data plan who make that things. I have tryed right now on Mobile Internet to open and browsing the Market and is work like a charm.
Sent from my GT-P1000 using XDA App
Dennywayne said:
Does the above solution work even after the update to the Android Market is applied? Obviously, wiping the tab will return it to the default apps, including Market.
I can go in to the "App" manager and uninstall the Market update and then it works on 3g but as soon as the update reinstalls (automatically), then the 3g is disabled again.
Thanks
Click to expand...
Click to collapse
the sec_csc file in the above post is for philippine carrier networks only. though you could do something similar with a sec_csc for your carrier networks.
Is there any other fix for this? I don't really want to start from scratch on my Glaxy tablet.
US based--at&t carrier.
same problem here. just flashed to overcome hermes and the market does not work on 3g. us att tab. im not really exited about reloading everything- i just finished. perhaps there is another solution?
i have an SGT-P1000N and flashed GB and now my dial-er does not work i am on US T-mobile, i was able to check my voice mail after i did the update, now it goes back to home screen when i hit the call button. any help. or or help going back to Froyo. Thank you
Karl
vince_junior said:
i finally got my market working in gingerbread thru 3G! thanks to noxxious for the great help!
try this procedure:
1. backup your data and apps, and your network's apn settings
2. get the sec_csc JQ1.zip from this thread: http://forum.xda-developers.com/showthread.php?p=13936755#post13936755 (post no. 47) and unzip it.
3. overwrite the csc folder in /system with the csc folder you got from step 3 (use root explorer)
4. using your dialpad, enter *#272*your_tab_IMEI#.
5. select "XTC" and press "install" (XTC is the international sales code that works on any country).
6. step 5 will wipe your data. if it fails, then switch off your tab and go to recovery mode (press the "on" key and volume up key at the same time).
7. select "wipe data".
8. when your tab restarts, it will propmt you again for setup (your sim card should be in the tab). when you're asked to connect to packet data, click the checkbox next to it. after setup, when i checked the settings\mobile network\apn settings, the tab automatically created the apn settings for me (if not, then manually create apn settings). switch on 3G and access the market!
it worked for me! hope it works for you, too!
Click to expand...
Click to collapse
I tried to replace the csc folder using the root explorer but i couldnt its says that the process succeeded but the folder stays the same, any help will be appreaciated
had the same problem... followed vince_junior post now everythings working... thx
3g wont connect on ATT galaxy tab running overcome v4.0
hi-- thanks for reading... i have a galaxy tab GT-P1000 on ATT 3G and wifi.
i am running the overcome 7 series v 4.0 ROM... the kernel is 2.6.35.7.
my problem is that the 3G service is spotty at best. i can do everything with WIFI but the 3G only connects intermittently. Does anyone have any research or answers for this.
thanks in advance.
I am new to all of this, I am now in Germany from the US and I am trying to unlock my Samsung Fascinate Galaxy S Hardware I500.04, Build #SCH=I500.ED05, Kernel2.6.32.9, Firmware 2.2.2. I don't have any internet connections but I want to just find a sim card for my phone I have activated USB debugging and used Super One Click to root my phone, it installed super user and then I applied galaxy s Unlock and then got a message that busybox had a problem and to fix it...but I have no clue how to proceed.
It initially created a folder on my phone Galaxy S Unlock and a sub-folder called efs but I am not sure what I should copy to it and how I can actually see all the documents and files when I am stuck using windows vista x64. I tried installing an android explorer program on my computer but the install failed...some config. issues.
Explorer is how I loaded the app programs on my phone by simply copying them to the download folder and once there, simply installed it but still get the same message concerning busybox...I have read the forum but I am not following too well can someone please help me? I forgot to mention I installed z4Root too. I only have access to any downloads on my PC no phone service at all. Can someone set me on the path to success?
I have always been big fan of Google Wallet. I had it working on my Note 2, S3, etc. I recently pick up Xperia Z and wanted to see if i was able to get it to work. Last night, i went to 7/11 and bought a drink, the guy behind me was blown away just the fact that i use the phone to pay it..I am on ATT. I've search in the app section for google wallet and no thread about it and wanted to share my experience.
I want to let you all know that i take no credit for this. All information i got is from that XDA and from prereq step 2. Also if you are on corp email, i would suggest remove it and re add after you get google wallet working.
Warning..if you don't know what you doing, please don't do this. this can cause bootloop and many other stuff. Precautionary, please back up..back up...
Here is how i got it to work.
PreReq
1) Phone rooted
2) go here and download latest google release from Modaco. Currently it should be r96-v13.
http://forum.xda-developers.com/showthread.php?t=1769083
3) root expolorer - please use this only otherwise you will get boot loop. For more information, follow thread in prereq 2.
Setup
1) Use root explorer and mount as r/w
2) go to /system/ and look for build.prop
3) open with text editor in Root explorer
4) within the file, search look for ro.xxxx, not ro.sem.xxx. look for exactly below.
ro.product.device=c6603
ro.product.name=c6603-1270-7689
ro.product.model=c6603
and replace with
ro.product.model=Galaxy Nexus
ro.product.name=yakju
ro.product.device=maguro
5) put the application from prereq step 2 to /system/apps and set permission to 644
6) go to setting,more and check nfc and under wallet select google
7) reboot
8) launch google wallet and follow direction
9) after you get google wallet to work then launch root explorer
10) go to /system and rename the build.prop to build.prop.ori
11) rename build.prop.bak to build.prop
12) reboot
13) money
Please note that i did the exact step and it work for me. I have the xperia z c6603 and i am on ATT. Again i take no credit but just reading up on xda. IF anything, thanks OP in the link i provided.
I am using Xperia Z on Straight Talk, I just installed Google Wallet from Play Store, however, I got a" Google Wallet is not yet available for your device or mobile network"
Is this gonna work?
yt92 said:
I am using Xperia Z on Straight Talk, I just installed Google Wallet from Play Store, however, I got a" Google Wallet is not yet available for your device or mobile network"
Is this gonna work?
Click to expand...
Click to collapse
Follow the above method it should work
Sent from my C6603 using Tapatalk 2
If anyone is in Canada that has it on their Z does it work lol
mardos said:
Follow the above method it should work
Sent from my C6603 using Tapatalk 2
Click to expand...
Click to collapse
It won't work when you change your build prop back
Teknohtc said:
If anyone is in Canada that has it on their Z does it work lol
Click to expand...
Click to collapse
Problem is how to use ur Canadian cc.
Sent from my C6603 using Tapatalk 2
I have this problem after I try to install google wallet
Also what is mean set permission to 644???
In root explorer hold down on file and go to permissions
4 is read
5 is read/execute (execute is always needed for directories)
6 is read/write
7 is read, write, and execute
The first number is Owner, the second is Group, and the third is Other. Thus 644 is
Read Read Read
Write
Sent from my C6603 using xda premium
can you do a video on this? and does this work on T-Mobile on C6602?
9) after you get google wallet to work then launch root explorer
10) go to /system and rename the build.prop to build.prop.ori
11) rename build.prop.bak to build.prop
I did steps 9-11 and changing build.prop BACK to the Sony settings breaks Google Wallet again, you need to keep the modified version w/ the Google Nexus settings for it to work after a reboot. I tested this and can confirm it works.
Works like a charm!
Works as advertised except that you may not need to download the Google wallet app from modaco as stated above. I did a search on playstore and got the latest version of Google wallet and at first, it allowed me to download it and install but I couldn't use it. I then just changed the name of the model, device etc... and rebooted and it worked!!
Cheers.
What carrier are you on?
Sent from my C6603 using xda premium
Doesnt work for me :crying: i tried but failed
UK - Orange/EE
Got problem with making payment.
Hey mad, im not sure u can help but I do need advise here. Mine is c6602 and im on tmobile 4g. I do all the steps except steps 9 to 11. The build.prop need to be kept as edited to make it work so I can open the app. Finally I get it and I tried the app. See a little yellow title that unsupported device on top. I added and selected my credit card. Then I went to office depot and tried it. With data network on, I make payment and everything go throught and it seemed I got transaction declined. I dont know what is the problem here. Is the rooted z rejeted by wallet recently or. Because of the carrier or the store system?
I really want to use the app so if u know the solution here plz show us.
Sorry to dig up an old thread. I have done this with every ROM I've installed on my Z and it worked every time. I am on AT&T, but I'm not sure if that matters. I even have a corporate Gmail account on this phone and it was unaffected by this process.
If you have trouble, you need to start all the way over. Remove the app from /system/app, fix your build.prop, and reboot. Then start at step one. It works even when you change your build.prop back to the Sony values if you follow the process correctly.
I have Niaboc's ExistenZe Ultra installed, Android 4.2.2, and this still works, just tested now.
If you get tired of the Play Store offering to update it, use Titanium Backup to disassociate it with the Market. You may have to do this several times, but it will stick eventually.
I should mention that com.android.phone complains and fc's a couple times at boot now, but it doesn't seem to cause any ongoing problems. Calls and SMS work just fine. All networking and telephony works as expected.
This same process worked on my Xperia ZL, my Xperia Acro S, and my Galaxy Note 1. Oh, and my Nexus 7. And the Note 2 while I had it.
S1nc3r3 said:
It won't work when you change your build prop back
Click to expand...
Click to collapse
I'm not sure if the exposed modules and framework are compatible with this phone or not, but you could try installing the exposed framework and the google wallet patch module.
This is for ppl who are facing issues because of blue stack, apguard or getting error messages like "tablet not supported", "it looks like your client has been modified". Please follow the below steps. I tried today and it worked perfect. No need to root your tablet. For easy understanding, I have colored the text :- Red-Things that are to be done on phone . Green-Things that are to be done on tablet
1) Install Carbon backup app from play store on your android smart phone and on your tablet. My android smart phone is rooted [it should work in non-rooted smart phone as well]
2) Take a back up of whatsapp and select the option to save it on your external SD card.
3) Now move to your tablet. Take a backup of any app. In my case, I took the back up of Temple Run2 and select to save the back up in your external SD card. This is mainly done to create the Carbon backup folder structure.
4) The back up would be available under /ext_sd_card/carbon/
5) Now back to your smart phone- copy the complete carbon folder under /ext_sd_card/carbon/ and upload it some where. You can use some file manager like EXexplorer to do this for you
6) Moving to your tablet, download the carbon folder you uploaded in your tablet and replace with the one that is already existing on your external SD card.
7) Open Carbon application and restore whatsapp
8) It will ask you to install whatsapp from play store. I would recommend you to download the apk and install it.
9) Select restore option again and restore whatsapp data
10) Now you can open whatsapp with the same state as you left it on your smart phone. I mean the messages
Please note : Whatsapp can be attached to a single number only, so please uninstall it on your smart phone after the above process.
If you want to use a different number on your tablet, then follow the below steps after Step 10.
Send one or two messages to your friends.
12) Uninstall whatsapp and install it again.
13) Restore the back up again from carbon app.
14) Open Whatsapp, you will be asked to verify your number.
15) Enter your new number and select Ok. Please make sure that the new number is in working state i.e. the SIM card is inserted into a phone and can receive SMS/call
16) Whatsapp will send the verification code to your new number.
17) Wait for sometime and you will get the prompt on your tablet to enter the verification code.
18) Enter it and enjoy
Good, but there is any way of doing that without an Android smartphone? Will the Bluestacks or YouWave works?
Blue stack worked for many but it did not for me. Not sure of you wave.
Sent from my GT-I9003 using xda app-developers app
I ussualy install ur normally and then it asks for a code
Just enter ur other mobile number and a message will appear with the code insert into the tablet and dfonee..
Sent from my GT-P3100 using xda app-developers app
help
I just have the wifi only galaxy tab p3110 ,! How to install ?
If you have another android device running whatsapp, then follow the above steps.
Sent from my GT-I9003 using xda app-developers app
virusarus said:
If you have another android device running whatsapp, then follow the above steps.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Should I have the smartphone evrytime i use whatsapp along with the tab ! ?
Or I can use any smartphone , follow the above process and after uninstalling whatsapp from that device
, I CAN use normally in my tab ?
santerrific said:
Should I have the smartphone evrytime i use whatsapp along with the tab ! ?
Or I can use any smartphone , follow the above process and after uninstalling whatsapp from that device
, I CAN use normally in my tab ?
Click to expand...
Click to collapse
Some info about Whatsapp before I answer your question.
1) You can TAG one Whatsapp account with one Phone number only
2) If you try to configure Whatsapp with a already tried phone number, then it would stop working in your previous device. [rather it asks for re-verification of the number in your previous device]
Coming back to your question :
Scenario 1 : Lemme assume that you have
* smartphone [android] with Whatsapp configured with your phone number [eg. 12345].
* you have ANOTHER active phone number [eg. 6789] which can receive SMS.
Then go ahead with the above steps and configure the other number [eg. 6789] on your tab. Now you can enjoy Whatsapp on your Smart phone [with your old number i.e. 12345] and your Tab [with your new number i.e 6789] simultaneously.
Scenario 2: Let us assume you have
* smartphone [android] with Whatsapp configured with your phone number [eg. 12345].
* you do not have an alternate active phone number.
Then go ahead with the above steps and configure whatsapp on your Tab with the only phone number [ i.e. 12345] you have. But after configuring, you will loose whatsapp on your smartphone.
You need not have your smartphone with you every time when you use Whatsapp on your Tab, in any of the above scenarios.
Please let me know if I answer your question and hit Thanks if it really helped you
Cheers
Thanks! Really helped me
One of my friend is using galaxy y ! He doesn't use whatsapp Can I use this method with my number in his phone ? Will it work ?
santerrific said:
One of my friend is using galaxy y ! He doesn't use whatsapp Can I use this method with my number in his phone ? Will it work ?
Click to expand...
Click to collapse
With your new phone number? or the existing?
Existing !
Sent from my GT-P3110 using Tapatalk 2
so what happens if i had Watsapp on two devices, the same nmber, at the same time?!
qazmed said:
guys it is impossible to get whatsapp on wifi tab without rooting and having another android phone that has the app whatever other guides are they are sh*t some people say use bluestacks or appguard it all ends in one way FAILURE
Click to expand...
Click to collapse
The so called sh*t you mentioned in your post is working for me w/o rooting. If you are not sure how to do stuffs, please stay away and do not de-motivate people. Thanks for understanding.
Mazensahlieh said:
so what happens if i had Watsapp on two devices, the same nmber, at the same time?!
Click to expand...
Click to collapse
Whatsapp allows you to have one number bound with one device only. So, it is impossible to have same number on both the devices.
santerrific said:
Existing !
Sent from my GT-P3110 using Tapatalk 2
Click to expand...
Click to collapse
No you can't. Whatsapp allows you to be online on a single device only with the same number. [hope this helps you in better understanding]
for the P5110 also serves thanks
Nice work mate.. Also nice to see another Mumbaikar here
Cheers:beer:
I'll try it now and post the results
Quite new to this forum...
Sent from my GT-P3110 using xda app-developers app
WHATSAPP regarding
I am not able to install the APP (WHATSAPP) in my device Samsung Tab GT-P3110 without 3G build no JZ054K P3110DDCMA4...NOTE: I have tried the carbon backup trick its backing & restoring the APP data (not the App).The restore is also with errors as it cannot see the APP in the device.... it asks for app but playstore wouldnt allow (it says the device not supported). However the App is installed from other way .....but would not continue to work . It stops & says (unfortunately its stoped).
Show me the way how to override.....& make the play store to allow install the APP.
mukundrathod said:
I am not able to install the APP (WHATSAPP) in my device Samsung Tab GT-P3110 without 3G build no JZ054K P3110DDCMA4...NOTE: I have tried the carbon backup trick its backing & restoring the APP data (not the App).The restore is also with errors as it cannot see the APP in the device.... it asks for app but playstore wouldnt allow (it says the device not supported). However the App is installed from other way .....but would not continue to work . It stops & says (unfortunately its stoped).
Show me the way how to override.....& make the play store to allow install the APP.
Click to expand...
Click to collapse
It did work for me on an already existing number and all its data too got restored.. Maybe you're missing a step..
Install apk but do not open it.. Restore data and then run/open the app... That did the trick for me..
Sent from my GT-P3110 using Tapatalk 4 Beta
EDIT: I have figured out how to make the EPTT work on any rooted android phone. Skip to post #6 for the tutorial and proof.
ProStreetCamaro said:
I have rooted and installed SU. I have tried Helium to backup the app on my old S3 then install the app on my new S5. It wont register that way. I tried Device spoofer to make it look like an S3 and it still wont register. I found an older thread where the guy said it worked with both above mentioned methods on his Note 3. But they dont seem to work on the S5. Anybody have any other ideas? Is the network possibly seeing the S5 sim card and simply going NOPE not happening or does it read the device info instead? If it is the sim maybe they can reactivate my S3 sim and maybe I can get it working that way?
Any thoughts or help would be greatly appreciated.
Click to expand...
Click to collapse
Try using Titanium Backup and doing the exact same thing; back up the app on your S3 to your SD card, move the card to your S5, restore the app. Should work fine. I've never worked with Helium.
cmerlyn said:
Try using Titanium Backup and doing the exact same thing; back up the app on your S3 to your SD card, move the card to your S5, restore the app. Should work fine. I've never worked with Helium.
Click to expand...
Click to collapse
I will give that a try. It seems like helium backs everything up except for the registration data and the network even when i spoof it still knows it is an S5. They told me at the store they expect eptt to be updated to work with the S5 soon but how long is "soon"? A week or two is no big deal but any longer becomes a real issue. I use it all the time. Luckily I have a paid subscription to titanium so when i get home I will give her a whirl and see what happens.
Same issue. It tries to activate on the network and it wont allow it.
You have to fix your sd permissions use this app.
https://play.google.com/store/apps/details?id=nextapp.sdfix
Ok guys here is the way to do it if anybody else ever runs into this situation. Device spoofer does work but it makes everything on the screen super small and after you activate EPTT and get it up and working then switch back to the stock profile it then stops working again.
In order to get the EPTT app to work on all non supported ATT android phones you must change the phones model number. I followed this tutorial and it worked perfectly. You must be rooted.
http://www.skytechblog.com/2013/01/change-mode-number-to-galaxy-s4-or.html
"Requirements:- A rooted Android device, Root explorer & patience
So let's Start..!! Video Tutorial
1. Start the Root Explorer app.
2. Go to System folder its in the root if the device
3. Make sure that System is in Read/Write from the top right
corner.
4. Look for a file named
build.prop in system folder.
5. Long press it for Options and then choose Text editor.
7. Search the line as followed ro.product.model= and then change the text after = sign to whatever you like your Model number to be displayed.
8. Press back and hit Save.
9. Exit the app and Reboot or simply Power off and on it.
That's it...its done now check the edited name in Settings>About phone> Model number
To get back to the original:- Just delete the build.prop and rename the build.prop.bak again to build.prop and reboot "
I changed mine to an S4 which is supported. The registration network looks for the Model number to verify it is being used on a supported device. Simply change it to the name of a supported device and waaa laaaa working EPTT.
As you can see by the icon at the top left I am signed in to EPTT and it does work great on the S5.
I know very few use this but for those that do and want a newer phone then here is your 100% working answer if you are willing to root your phone.