Database Develop

Nexus S and ICS a little problem

Hi all
I did not receive the OTA so I decided to manually update my nexus s (I9020XXK1)
Unfortunately the navigation works only on wi-fi. Although the data navigation is turned on the mobile does not download email etc.
I thought it was a problem with widgetsoid and I disinstalled it but the problem is still there.
I also tried to update the APN via "APN Italiani" but the programs shows the generic message that "he encountered an error"
My question: do you have any idea how to work it out? and also: is there a program similar to widgetsoid for a dummy (me)?
thanks a lot

paperaino said:
Hi all
I did not receive the OTA so I decided to manually update my nexus s (I9020XXK1)
Unfortunately the navigation works only on wi-fi. Although the data navigation is turned on the mobile does not download email etc.
I thought it was a problem with widgetsoid and I disinstalled it but the problem is still there.
I also tried to update the APN via "APN Italiani" but the programs shows the generic message that "he encountered an error"
My question: do you have any idea how to work it out? and also: is there a program similar to widgetsoid for a dummy (me)?
thanks a lot
Click to expand...
Click to collapse
just flash a customer rom like aosp + (http://forum.xda-developers.com/showthread.php?t=1397358) -> all works

it would be even worst! I already tried but I'm a dummy and couldn't do it
at home I have a mac and could not get a propor procedure. now (at work) I have a pc but no administrator rights.
if there is an easy way to do it then I will give it a try but I would need a "guide for dummies"

paperaino said:
it would be even worst! I already tried but I'm a dummy and couldn't do it
at home I have a mac and could not get a propor procedure. now (at work) I have a pc but no administrator rights.
if there is an easy way to do it then I will give it a try but I would need a "guide for dummies"
Click to expand...
Click to collapse
go to market and install rom manager start it and install clockworkmod recovery (the first thing) download a customer rom and put it to your sd card bzw internal storage shutdown your phone then press vol down button start your phone now you are in clockworkmod recovery then wipe data factory reset then format cache and choose flash form zip choose your rom and flash it restart your phone thats it

try looking at this post
http://forum.xda-developers.com/showthread.php?t=878446
and this http://forum.xda-developers.com/showthread.php?t=1007782

Crespo_Fir3start3r said:
go to market and install rom manager start it and install clockworkmod recovery (the first thing) download a customer rom and put it to your sd card bzw internal storage shutdown your phone then press vol down button start your phone now you are in clockworkmod recovery then wipe data factory reset then format cache and choose flash form zip choose your rom and flash it restart your phone thats it
Click to expand...
Click to collapse
I downloaded "rom manager"
WhenI tried to install clockworkmode recovery he told me some problems occurred while executing provileged commands...

paperaino said:
I downloaded "rom manager"
WhenI tried to install clockworkmode recovery he told me some problems occurred while executing provileged commands...
Click to expand...
Click to collapse
fuu sri i forgot that you need root to install cmw
http://forum.xda-developers.com/showthread.php?t=1321582 download this and root your phone step by step with this one click tool very easy then follow the guide again

Crespo_Fir3start3r said:
fuu sri i forgot that you need root to install cmw
http://forum.xda-developers.com/showthread.php?t=1321582 download this and root your phone step by step with this one click tool very easy then follow the guide again
Click to expand...
Click to collapse
Ok I downloaded it and run the .bat file
checked everything and plugged the cable
clicked on "enter" the dos says:
*daemon not running. starting it now*
*daemon started successfully*
then?

paperaino said:
Ok I downloaded it and run the .bat file
checked everything and plugged the cable
clicked on "enter" the dos says:
*daemon not running. starting it now*
*daemon started successfully*
then?
Click to expand...
Click to collapse
click enter again and follow the guide in this tool erverything is explained

Crespo_Fir3start3r said:
click enter again and follow the guide in this tool erverything is explained
Click to expand...
Click to collapse
unfortunately "enter" brings noway
the dos prompt keeps there with no reaction..

paperaino said:
unfortunately "enter" brings noway
the dos prompt keeps there with no reaction..
Click to expand...
Click to collapse
that´s strange it should work :/
have you done all these things ?
[*] Before u begin:
(1) make sure u have installed adb drivers for ur device
(2) enable "USB DEBUGGING"
from (Menu\Settings\Applications\Development)
(3) enable "UNKNOWN SOURCES"
from (Menu\Settings\Applications)
(4) [OPTIONAL] increase screen timeout to 10 minutes
(5) connect USB cable to PHONE and then connect to PC
restart it maybe this help

Crespo_Fir3start3r said:
that´s strange it should work :/
Click to expand...
Click to collapse
the mobile is turned on. I have unplugged it, closed the prompt and re-launched the bat
now it only says:
---Starting
---Waiting for device

paperaino said:
the mobile is turned on. I have unplugged it, closed the prompt and re-launched the bat
now it only says:
---Starting
---Waiting for device
Click to expand...
Click to collapse
if you enabled usb debugging you have to connect your device with your pc

Crespo_Fir3start3r said:
that´s strange it should work :/
have you done all these things ?
[*] Before u begin:
(1) make sure u have installed adb drivers for ur device
(2) enable "USB DEBUGGING"
from (Menu\Settings\Applications\Development)
(3) enable "UNKNOWN SOURCES"
from (Menu\Settings\Applications)
(4) [OPTIONAL] increase screen timeout to 10 minutes
(5) connect USB cable to PHONE and then connect to PC
restart it maybe this help
Click to expand...
Click to collapse
(1) how do I install them?
(2) OK
(3) OK
(4) no it was optional...
(5) of course

paperaino said:
(1) how do I install them?
(2) OK
(3) OK
(4) no it was optional...
(5) of course
Click to expand...
Click to collapse
http://developer.android.com/sdk/win-usb.html a google tutorial how to install the drivers needed
beside I am at school so I am not able to answer everytime if I could I answer you sri for this

Crespo_Fir3start3r said:
http://developer.android.com/sdk/win-usb.html a google tutorial how to install the drivers needed
beside I am at school so I am not able to answer everytime if I could I answer you sri for this
Click to expand...
Click to collapse
I'm trying this way (hopefully it will work considering that I do not have administrator rights)
Would be great if there was a program to install directly on the nexus ...
beside I'm in the office
unfortunately it doesn't work
I don't have the provileges to update drivers on this pc. I will try later at home with my wife pc or something different

paperaino said:
I'm trying this way (hopefully it will work considering that I do not have administrator rights)
Would be great if there was a program to install directly on the nexus ...
beside I'm in the office
unfortunately it doesn't work
I don't have the provileges to update drivers on this pc. I will try later at home with my wife pc or something different
Click to expand...
Click to collapse
ohh ok xD and yes you need admin rights for this :/
Would be great if there was a program to install directly on the nexus ... ? do you mean the driver when yes they are for windows xD or what do you mean ?

Crespo_Fir3start3r said:
ohh ok xD and yes you need admin rights for this :/
Would be great if there was a program to install directly on the nexus ... ? do you mean the driver when yes they are for windows xD or what do you mean ?
Click to expand...
Click to collapse
we are trying all this just to root the nexus s (from my understanding)
would be great there was an easy way to get root access straight from the nexus without connecting it to a pc or mac

paperaino said:
we are trying all this just to root the nexus s (from my understanding)
would be great there was an easy way to get root access straight from the nexus without connecting it to a pc or mac
Click to expand...
Click to collapse
I do not know anything like that :S

[Q] Xperia SP - ADB Drivers

Hi!
I cannot find ADB Drivers for Xperia SP (need them to root the phone )
Can someone provide a link to download them?
thanks!

Are you on 64bit Windows 8?
Coz I faced the same problem.
But then I tried rooting on a Windows 7 pc. And Windows automatically installed the correct drivers. Seems that adb isn't supported on 64bit Windows 8.
Sent from my C5302

Connect your Xperia SP via USB. (Don't forget to enable USB Debugging)
Then run the Software (http://adbdriver.com/downloads/) and choose ur phone, which should be listed in the list.

DeathCzar said:
Are you on 64bit Windows 8?
Coz I faced the same problem.
But then I tried rooting on a Windows 7 pc. And Windows automatically installed the correct drivers. Seems that adb isn't supported on 64bit Windows 8.
Sent from my C5302
Click to expand...
Click to collapse
I'm using Win7 32-bit.
And I cannot use DoomLord's Easy Rooting Toolkit (nothing is happening)

Thanks Deathless93!
Problem solved.

shinichizx said:
Thanks Deathless93!
Problem solved.
Click to expand...
Click to collapse
how?

regentonne said:
how?
Click to expand...
Click to collapse
download adb drivers from here: http://adbdriver.com/downloads/

shinichizx said:
Hi!
I cannot find ADB Drivers for Xperia SP (need them to root the phone )
Can someone provide a link to download them? please
Click to expand...
Click to collapse

Normally drivers are being installed when you first connect your phone to the PC

shinichizx said:
Hi!
I cannot find ADB Drivers for Xperia SP (need them to root the phone )
Can someone provide a link to download them?
thanks!
Click to expand...
Click to collapse
use this software to download ADB driver
http ://adbdriver.com/upload/AdbDriverInstaller.exe
[remove space from the link above as I cannot post outside link because i am new here ]
If you get error(mostly on windows 8/8.1) while installing driver; then you have to Disable Driver Signature Enforcement and give another try.
To Disable Driver Signature Enforcement:
1) Move the mouse pointer to the BOTTOM RIGHT of the screen and go to SETTINGS.
2) Click CHANGE PC SETTINGS
3) Choose GENERAL from the left side and under Advanced Startup click on RESTART NOW
4) Your PC will restart and you will see some options.
5) Select TROUBLESHOOT > ADVANCED OPTIONS > STARTUP SETTINGS > RESTART
6) Select Disable Driver Signature Enforcement and your PC will boot.
Now install driver using above given link.

[ROM][JB4.2.2] Lenovo IdeaTab A3000-H Call - A3000_A422_011_022_140127_WW_CALL_FUSE

NOTE : These Firmwares developed by Lenovo, not me.
I am just helping people to take advantage from their Lenovo A3000-H by Giving small guides and resources.
Click to expand...
Click to collapse
Here is the Lenovo A3000-H Android 4.2.2 Firmware With the Calling Option..
Flash Tool Inside the RAR Archive (If not found inside rar Archive, Just download it separately from Download Section)
Click to expand...
Click to collapse
Here is a Small Guide How To Install the Firmware (I assume you already Installed the Lenovo Drivers
- See Download Section For Drivers)
Click to expand...
Click to collapse
** Short note to Install Drivers Quickly, Download the drivers package and extract it into a new folder in your desktop, open device manager and wait..
- then switch off the tab, connect the cable to your computer and tab, device manager will show a new device something like MT65xx,
- right click it and click " Update Driver Software, then select " Browse from My Computer " and Select the extracted Driver folder from your desktop, Click Next..
- It will Install Drivers, If any confirmations asking " Do You Want to Continue " or " Do You Want to Install " Just click " YES "
- For Windows 8 and 8.1, You must restart your PC in Driver Signature Enforcement Mode (Search on Internet how to Disable Driver Signature Enforcement in Windows 8). After Booting into that Mode, Follow above Instructions.
WARNING : DO NOT TOUCH THE OPTION " FORMAT " IN THE FLASH TOOL.
IF YOU FORMAT YOU WILL LOSE YOUR TAB's IMEI NUMBER & WIFI MAC ADDRESS.
Click to expand...
Click to collapse
IMPORTANT : BEFORE YOU PLAY AROUND, IT IS BETTER YOU TAKE A BACKUP OF YOUR " NVRAM " FOLDER FROM ROOT ==>> data ==>> nvram
COPY THE COMPLETE " nvram " FOLDER TO YOUR SD CARD AND KEEP A COPY IN YOUR PC.
THIS nvram FOLDER CONTAINS YOUR IMEI, WIFI MAC, SERIAL NUMBER AND OTHER IMPORTANT DATA.
Click to expand...
Click to collapse
1. Unpack the RAR archive to Somewhere in Your Computer (Me Extracted to a Folder in Desktop)
(You will find 4 Folders Inside the rar Named : modemdb, SP_Flash_Tool_NEW, SP_Flash_Tool_OLD, target_bin)
- Some Firmwares does not contain all the folders. So don't worry about that, Just the Important folder is target_bin.
2. Open " SP_Flash_Tool_OLD " Folder, There You Will Find a Blue Icon, Flash_tool.exe file
3. Double Click Flash_tool.exe (If you are using windows Vista/ 7/ 8/ 8.1 Right Click the Flash_tool.exe and Run As Administrator.
4. Then the Flashtool will Open up.. There you can Find Lots of Options.. Be careful, Do not Click any other Options until u get a knowledge about that, otherwise your Device will be Ruined..
5. Now Click the " Scatter-loading " In the Top Right Corner of the Tool, then Navigate to the Extracted Firmware Folder, and goto the target_bin, there you will find a file named " MT6589_Android_scatter_emmc.txt " Select that file and Click " Open "
6. Make Sure " DA DL All with check sum " option is Ticked
** NOTE : If " FAC " is not selected, please tick the FAC option and click on the name " FAC " it will give you file explorer to select the FAC file
then select " FAC.img " file from the firmware folder. (This only applicable for A3000_A422_* and later firmwares)
7. Now Switch off the tablet, wait for 15 seconds And Prepare the USB cable, And Click " DOWNLOAD " (in case if you get any error messages when you click DOWNLOAD, then Please Click " FIRMWARE->UPGRADE " option) then wait 5 Seconds and Connect the USB cable to the Tablet. It will Start Flashing. A yellow Bar will appear, It will take 3 to 5 Minutes to Finish the flash Operation. Do not Disconnect until that. Finally A small Green Round Box Appear, That means Everything Success.. Now Disconnect the Cable and Start the Tablet
It will take Few Minutes to start the Tablet First time, So wait Patiently. After Start It will ask you to select the language, Select English or any language you want.. and Configre time and Everything.. Thats all.
Click to expand...
Click to collapse
VIDEO TUTORIAL :
Click to expand...
Click to collapse
DOWNLOADS
Click to expand...
Click to collapse
Android 4.2.2 Latest Firmware With All Languages & FUSE Partition
A3000_A422_011_022_140127_WW_CALL_FUSE
Firmware Released on 27th January 2014..
CLICK HERE TO DOWNLOAD A3000_A422_011_022_140127_WW_CALL_FUSE FIRMWARE
انقر هنا لتحميل أحدث البرامج الثابتة حزمة.
Click to expand...
Click to collapse
OTHER (OLD) DOWNLOADS - IN THE FOLDER (FOR ADVANCED USERS ONLY )
CLICK HERE TO OPEN THE DOWNLOADS FOLDER!
Click to expand...
Click to collapse
UPDATED Drivers (23rd February 2014) (Flash and ADB) : http://www.mediafire.com/download/juzwauwy9rx9yw6/Drivers_v1.2.zip
Click to expand...
Click to collapse
Latest Flash Tool : http://www.mediafire.com/download/k0lpbxp5fmuvpzu/SP_Flash_Tool_exe_v3.1328.0.183.zip
.

Recovery and Gapps
TWRP Recovery and Gapps (OPTIONAL - ONLY FOR ADVANCED USERS )
Click to expand...
Click to collapse
** RECOVERY INSTALLATION ALSO SAME LIKE INSTALLING FIRMWARE. JUST LOAD THE SCATTER FILE FROM THE RECOVERY PACKAGE AND HIT DOWNLOAD! IF ANY WARNINGS APPEARS, JUST IGNORE THEM!
Install this TWRP RECOVERY ONLY If You are Running " A3000_A422_000_006_130517_WW_CALL " Firmware!
CLICK HERE TO DOWNLOAD TWRP RECOVERY FOR " A3000_A422_000_006_130517_WW_CALL " FIRMWARE
Click to expand...
Click to collapse
Install this TWRP RECOVERY ONLY If You are Running " A3000_A421_000_029_130327_CN_3G " Firmware!
CLICK HERE TO DOWNLOAD TWRP RECOVERY FOR " A3000_A421_000_029_130327_CN_3G " FIRMWARE
Click to expand...
Click to collapse
Install This GAPPS after Installing " A3000_A421_000_029_130327_CN_3G " Firmware and Recovery..
** Put the GAPPS Package on a Memory card and Install through TWRP Recovery
CLICK HERE TO DOWNLOAD GAPPS FOR A421
Click to expand...
Click to collapse
Use framroot to root your tab.
Download : CLICK HERE TO DOWNLOAD FRAMROOT 1.6.0 APK
Click to expand...
Click to collapse
Check here How to Install GAPPS manually using Root Explorer..
Note : Your Tab must be rooted before Install the Gapps manually..
Extract the gapps zip package somewhere in your memory card using computer before copy.
Click to expand...
Click to collapse
Some Screenshots!

Does this firmware include the "fused" internal storage partitions, a single 13GB partition instead of one 1GB for apps and one 12GB for other?

MrBeck said:
Does this firmware include the "fused" internal storage partitions, a single 13GB partition instead of one 1GB for apps and one 12GB for other?
Click to expand...
Click to collapse
It Includes 1GB for Apps and 12GB For Files

Lenovo drivers
how can i install the lenovo a3000 drivers? via PC or on the tablet itself?

bedrock0220 said:
how can i install the lenovo a3000 drivers? via PC or on the tablet itself?
Click to expand...
Click to collapse
Download the drivers package, extract it to the desktop. Then Open flash tool and Initialize the flashing procedure, then hit download and connect the tablet to the pc, it will ask to install drivers, if not then goto device manager, u can see there your device right click it and click update drivers, then give the extracted location of the drivers. it will install.

Point 7 is not clear ! why wait seconds ?!
* What means prepare usb cable to plug it or to prepare it ?!
* All previous points should be done while USB connected to pc ?

lenovo a3000
Sir,
I followed your instruction on installing driver via device mgr and the result is driver is updated.I followed your instruction on flashing and when off my tab and push the download button and wait 5 secs after that to connect the USB to pc. But when I push the download the flasher started reading and the bar is in pink color, when I put my USB after 5 secs there is no reaction on the flasher, only on my tab has an icon of battery and under charging.PLEASE HELP.
note: my tab FW already jb 4.2.2 without call function.

jazmy said:
Point 7 is not clear ! why wait seconds ?!
* What means prepare usb cable to plug it or to prepare it ?!
* All previous points should be done while USB connected to pc ?
Click to expand...
Click to collapse
After Turning off the tablet, it is better you wait few seconds before connecting to pc for flashing.
You Should not Connect the Cable to the tablet Before 7th Stage, All previous points should be done WITHOUT CONNECTING USB to PC.
You Should connect the Cable after You Click the Button " DOWNLOAD "

bedrock0220 said:
Sir,
I followed your instruction on installing driver via device mgr and the result is driver is updated.I followed your instruction on flashing and when off my tab and push the download button and wait 5 secs after that to connect the USB to pc. But when I push the download the flasher started reading and the bar is in pink color, when I put my USB after 5 secs there is no reaction on the flasher, only on my tab has an icon of battery and under charging.PLEASE HELP.
note: my tab FW already jb 4.2.2 without call function.
Click to expand...
Click to collapse
After you hit the DOWNLOAD button connect the Cable to the tablet. If its started in charging Mode(tab has an icon of battery and under charging) Just reset the tablet while its connected to the pc. Reset button is near the 2nd SIM Slot.

azam426 said:
After you hit the DOWNLOAD button connect the Cable to the tablet. If its started in charging Mode(tab has an icon of battery and under charging) Just reset the tablet while its connected to the pc. Reset button is near the 2nd SIM Slot.
Click to expand...
Click to collapse
i followed your instruction sir to reset it while connected to PC but still no response on the flasher, no yellow bar status either.any other suggestion for such result?

bedrock0220 said:
i followed your instruction sir to reset it while connected to PC but still no response on the flasher, no yellow bar status either.any other suggestion for such result?
Click to expand...
Click to collapse
Can you check the device manager after connecting the tab to pc??? see is there any un installed drivers left there or not..

azam426 said:
After you hit the DOWNLOAD button connect the Cable to the tablet. If its started in charging Mode(tab has an icon of battery and under charging) Just reset the tablet while its connected to the pc. Reset button is near the 2nd SIM Slot.
Click to expand...
Click to collapse
Sir, i just followed your instruction to rest the tab while it is connected to the PC but still no response from the flasher, even yellow bar status is not present. i transfer the device to other usb ports but after i push the DOWNLOAD button but the PC is looking for MTK65xx driver? so the flashing did not push thru. where can i get this driver?
i 2x check the device manager for my tab that is connected to PC, i only found out portable device with 2 drives (D,E) and some usb ports. i update the drivers of both using the file locations but it is up to date.
please help...
---------- Post added at 02:17 PM ---------- Previous post was at 02:12 PM ----------
azam426 said:
After you hit the DOWNLOAD button connect the Cable to the tablet. If its started in charging Mode(tab has an icon of battery and under charging) Just reset the tablet while its connected to the pc. Reset button is near the 2nd SIM Slot.
Click to expand...
Click to collapse
Sir, i just followed your instruction to rest the tab while it is connected to the PC but still no response from the flasher, even yellow bar status is not present. i transfer the device to other usb ports but after i push the DOWNLOAD button but the PC is looking for MTK65xx driver? so the flashing did not push thru. where can i get this driver?
i 2x check the device manager for my tab that is connected to PC, i only found out portable device with 2 drives (D,E) and some usb ports. i update the drivers of both using the file locations but it is up to date.
please help...
---------- Post added at 02:27 PM ---------- Previous post was at 02:17 PM ----------
i check the device manager and i think all drivers are already installed. any other solution for me to try?

azam426 said:
After you hit the DOWNLOAD button connect the Cable to the tablet. If its started in charging Mode(tab has an icon of battery and under charging) Just reset the tablet while its connected to the pc. Reset button is near the 2nd SIM Slot.
Click to expand...
Click to collapse
I didn't try it yet but maybe bedrock0220 has different Jellybean version !!

check the screenshot of my tab maybe it will help...TY

bedrock0220 said:
check the screenshot of my tab maybe it will help...TY
Click to expand...
Click to collapse
do i need to off my tab before i go to device manager?
is there a USB debugging or developer option on the tab that i will open?

bedrock0220 said:
Sir, i just followed your instruction to rest the tab while it is connected to the PC but still no response from the flasher, even yellow bar status is not present. i transfer the device to other usb ports but after i push the DOWNLOAD button but the PC is looking for MTK65xx driver? so the flashing did not push thru. where can i get this driver?
i 2x check the device manager for my tab that is connected to PC, i only found out portable device with 2 drives (D,E) and some usb ports. i update the drivers of both using the file locations but it is up to date.
please help...
---------- Post added at 02:17 PM ---------- Previous post was at 02:12 PM ----------
[/COLOR]
Sir, i just followed your instruction to rest the tab while it is connected to the PC but still no response from the flasher, even yellow bar status is not present. i transfer the device to other usb ports but after i push the DOWNLOAD button but the PC is looking for MTK65xx driver? so the flashing did not push thru. where can i get this driver?
i 2x check the device manager for my tab that is connected to PC, i only found out portable device with 2 drives (D,E) and some usb ports. i update the drivers of both using the file locations but it is up to date.
please help...
---------- Post added at 02:27 PM ---------- Previous post was at 02:17 PM ----------
i check the device manager and i think all drivers are already installed. any other solution for me to try?
Click to expand...
Click to collapse
Try the Drivers From Next Post, Download it, Extract it then double click install.bat it will install Drivers. Then try to flash.
Your tab should be always off when you do flash operations (Install flash drivers, flash new firmware etc) by connecting the USB cable

New usb flash driver!
NEW USB FLASH DRIVER!
Try to Install this Driver and Flash... :good:

bedrock0220 said:
do i need to off my tab before i go to device manager?
is there a USB debugging or developer option on the tab that i will open?
Click to expand...
Click to collapse
I am Busy today, Inshaallah tomorrow i will try to Make a Video Tutorial for Install Drivers, firmware etc..

Firmware upgrade
Hi.....We need to press "Download" or "Firmware-Upgrade". If I press "Download", I am getting message to press "Firmware-Upgrade".
Thanks,

adb not working

when i want boot with volume + and cable for fastboot i get bluescreen on windows 7 x64
when i try install the adb drivers for adb usage i add them all with yellow exclamation. When i want install them from folder with .inf file it says its not for my system.

xxlocalxx said:
when i want boot with volume + and cable for fastboot i get bluescreen on windows 7 x64
when i try install the adb drivers for adb usage i add them all with yellow exclamation. When i want install them from folder with .inf file it says its not for my system.
Click to expand...
Click to collapse
can you show me link what drivers u try install ? windows 8x64 here , so ill be able to help you.

246555 3912
ok
i have these https://www.dropbox.com/s/2imekn1nn07n1ly/Fastboot-Driver.zip and the normal lg usb driver installed

xxlocalxx said:
ok
i have these https://www.dropbox.com/s/2imekn1nn07n1ly/Fastboot-Driver.zip and the normal lg usb driver installed
Click to expand...
Click to collapse
Windows will install adb drivers automatically once the phone is connected (depending on what mode).
Give time and let the "Windows Device Manager" do the rest.
If you want to try to unlock bootloader, thats another story...
Use this and follow the guide:
http://www.4shared.com/rar/HFf4newq/LGO4X-UNLOCK-BOOTLOADER.html

yes with the yellow exclamation symbol

xxlocalxx said:
ok
i have these https://www.dropbox.com/s/2imekn1nn07n1ly/Fastboot-Driver.zip and the normal lg usb driver installed
Click to expand...
Click to collapse
those are fine. just force them in. whats the problem ? open the system manager , right click where u wanna install the driver, choose update , choose from pc, choose from list of programs, have disk, choose one whatever file in x64 or x86 depending ur windows version, choose the adb testing interface for android and u r done

is says the files are not for my sytem although right one

xxlocalxx said:
is says the files are not for my sytem although right one
Click to expand...
Click to collapse
there are 2 ways to install the files. the one way sais it is not for ur system and the other way just force the driver in.
use mine if u want im on windows 8x64. but i tell u they are similar.

xxlocalxx said:
is says the files are not for my sytem although right one
Click to expand...
Click to collapse
Try to let the Windows re-install the correct drivers.
Go to the Control Panel and open Device Manager (your device should be connected in charge mode only and debbuging ON),
you should see something like "ADB Interface" and "Android Sooner Single ADB Interface", right-click on it and choose "Update Software Driver"
(something like that, mine is in portuguese...). If it doesn't work, just uninstall it and "Search for Hardware Changes". Let Windows install it
from the Internet.
BTW, the driver location should be: "x:\Windows\system32\DRIVERS\lgandnetadb.sys"

xxlocalxx said:
is says the files are not for my sytem although right one
Click to expand...
Click to collapse
another way that maybe works but is more like a "pro" way , is to install to your pc the whole android sdk. this will search for drivers on its own and install them. it will install the latest google adb which is also working. if u dont make it to force the drivers in, let me know to show u link to the android sdk ( easy to find though ** if u end up to sdk careful to download the x32 version even if u are on x64 and double check that u have installed the latest java jdk also x32 even if u r on x64 ! )

i have sdk already, it dont matter which adb interface i want to add from google it always has the exclamation
adt-bundle-windows-x86_64-20130917.zip

in your case i cant help any more. i told you exactly what to do. next step is if i was there to do it myself. ill try make some images to show you how i installed the drivers but it will be in greek. button and everything are in same place, only language will be different.
---------- Post added at 09:22 PM ---------- Previous post was at 09:16 PM ----------
oke check this guide too. http://donandroid.com/how-to-install-adb-interface-drivers-windows-7-xp-vista-623

yes do it but i just did what u say

[Q] Developer Unlock WP Devices (MaxUnsignedApp = 10) Problem

Hey,
i read the thread in the Hacking Section and because iam a new member here i cant post in this thread.
My problem is that i tried to unlock my Phone (Lumia 820) via this Tool (aiyingyong the chinese one) and i get an error after downloading an archive or something like that. See the picture.
I have Win 8.1 64bit, Visual Studio 2012 Update 4 but no WP8 Emulator. But everything else is working like WP Power Tools, XAP Deployer and Unlock and Locking the Phone for Development.
I tried to change the name of the Phone and started the chinese app as Admin.
Just this Tool wont work. I just want the 10 unsigned apps instead of the 2 that i have right now with my free Dev Account.
Can you please help me?

Hey bro...i am too facing this error..."Unable to open archive".
And i have posted in that thread on page 9.
Check my post and SS....
Hoping someone help me there...

Amirphp said:
Hey bro...i am too facing this error..."Unable to open archive".
And i have posted in that thread on page 9.
Check my post and SS....
Hoping someone help me there...
Click to expand...
Click to collapse
Thanks i will check it later

Why don`t you guys try the "Dreamspark/Intuit" trick and gain the 10 apps limit?I know its a little frustrating with all those translations but at the end it`s worth to have a try.

Thanks CV bro for reply....
But...Now My problem solved and my phone is unlocked for 10 app....
 @thread OP....check that thread at that page 10 and ....And follow the steps....thats work perfectly.

Same problem but not getting fixed
I tried it on my Lumia 520 and I too have this problem. I tried the ways mentioned by the member in 10th page of the TUT on doing this but failed. It justs downloads something everytime when i connect phone ( a 10 MB file which i see in the directory of the software). I tried deleting the device drivers and installed it again, failed. I renamed the phone to Lumia 920, failed. I installed the softwares from various sources including the attachment provided by the member who had given some steps for this problem but failed. Can someone help out me

Have u installed wp8 sdk?
and what's the status of Windows developer registration tool...when u connect your lumia 520 to pc...if u already have installed sdk?

Amirphp said:
Have u installed wp8 sdk?
and what's the status of Windows developer registration tool...when u connect your lumia 520 to pc...if u already have installed sdk?
Click to expand...
Click to collapse
I have SDK and my phone was registered but now unregistered it and it detects my phone.

gouthamhere said:
I have SDK and my phone was registered but now unregistered it and it detects my phone.
Click to expand...
Click to collapse
1.Uninstall your old chinies software from pc....and reboot
2.Download and install it:
http://forum.xda-developers.com/attachment.php?attachmentid=2546188&d=1390981688
Dont update if asked for update.
3. Reboot your mobile and off data connection from setting > Mobile Networks.
4. Now connect with PC (without internet) and rename mobile from My Computer to Nokia Lumia 920.
Before connecting make sure both PC and mobile have same date/time.
5. Now chinies tool should detect your phone.
6. After detecting if u did not getting blue button then....On Data connection in Mobile and Pc both.
7. And disconnect USB and Connect again...and wait for a minute.
Then Unlock.
Same i did...and worked.

Amirphp said:
1.Uninstall your old chinies software from pc....and reboot
2.Download and install it:
http://forum.xda-developers.com/attachment.php?attachmentid=2546188&d=1390981688
Dont update if asked for update.
3. Reboot your mobile and off data connection from setting > Mobile Networks.
4. Now connect with PC (without internet) and rename mobile from My Computer to Nokia Lumia 920.
Before connecting make sure both PC and mobile have same date/time.
5. Now chinies tool should detect your phone.
6. After detecting if u did not getting blue button then....On Data connection in Mobile and Pc both.
7. And disconnect USB and Connect again...and wait for a minute.
Then Unlock.
Same i did...and worked.
Click to expand...
Click to collapse
I did everything until Step 4. Connected the phone to the PC without internet on both, and this error happens http://snag.gy/SYnU2.jpg and if i try again with internet on in PC, it downloads something ( http://snag.gy/MGPVd.jpg ) inside the Chinese software and the Launcher Error ( http://snag.gy/ps4P7.jpg ) shows up.
I tried it many times and tried with names Lumia 520, 920 and 1520 but nothing works.
I think its some problem with my drivers though my pc detects it and i can even register and unregister it through Developer Tool provided by Microsoft.

gouthamhere said:
http://snag.gy/MGPVd.jpg.
Click to expand...
Click to collapse
Previously that was happened with me too....
But after new version installed from developer thread...worked that...
And its detects my phone instantly as i connect...did not tried to upgrade.
* I did one more thing on My PC...when i was getting this http://snag.gy/MGPVd.jpg error.
Goto Control pannel > Region and Language > Administrative > Change System Locale > Chinies(Tradistiona, Taiwan).
Apply And Reboot....
Then Uninstall Chinies tool and Repeat the same process what i have mentioned in previous post....thats it.

Hello, sorry for bad english language I'm italian and I'm 14.
You have to click CTRL+R, write "intl.cpl", go to "Administrative" and click "Change System Locale", select "Chinese, Simplified, China", and once applied click Restart now.
After reboot it should work, if you can't do it here's a video that explains everything. (It's in italian)
ww w.youtube . com /watch? v=DWTyIaTMbLY&app=desktop

Amirphp said:
1.Uninstall your old chinies software from pc....and reboot
2.Download and install it:
http://forum.xda-developers.com/attachment.php?attachmentid=2546188&d=1390981688
Dont update if asked for update.
3. Reboot your mobile and off data connection from setting > Mobile Networks.
4. Now connect with PC (without internet) and rename mobile from My Computer to Nokia Lumia 920.
Before connecting make sure both PC and mobile have same date/time.
5. Now chinies tool should detect your phone.
6. After detecting if u did not getting blue button then....On Data connection in Mobile and Pc both.
7. And disconnect USB and Connect again...and wait for a minute.
Then Unlock.
Same i did...and worked.
I did what u said, after clicking the blue botton,
The gray phone know has an open lock but doesn't happened
anything.
Click to expand...
Click to collapse