[Q] HELP phone is bricked: invalid card (C5302) - Xperia SP Q&A, Help & Troubleshooting

i bricked my phone(C5302) because installing custom kernel,
then i flash stock again using flashtool and it boot again but now it keep saying "invalid card", :crying:
i checked using *#*#7378423#*#*,
open service info > sim lock, i got all the info value is 0
then i open configuration, i found out that "Bootloader unlock allowed : No" :crying:
i also use PC Companion and Sony Update Service but won't work for me
plz help me to fix this problem...... :crying:

THE KING of kings said:
i bricked my phone(C5302) because installing custom kernel,
then i flash stock again using flashtool and it boot again but now it keep saying "invalid card", :crying:
i checked using *#*#7378423#*#*,
open service info > sim lock, i got all the info value is 0
then i open configuration, i found out that "Bootloader unlock allowed : No" :crying:
i also use PC Companion and Sony Update Service but won't work for me
plz help me to fix this problem...... :crying:
Click to expand...
Click to collapse
Which gerion of ftf are you flashed? Where you downloaded from? Some ftf file is come with carrier locked.

THE KING of kings said:
i bricked my phone(C5302) because installing custom kernel,
then i flash stock again using flashtool and it boot again but now it keep saying "invalid card", :crying:
i checked using *#*#7378423#*#*,
open service info > sim lock, i got all the info value is 0
then i open configuration, i found out that "Bootloader unlock allowed : No" :crying:
i also use PC Companion and Sony Update Service but won't work for me
plz help me to fix this problem...... :crying:
Click to expand...
Click to collapse
Make sure your phone is fully charged (minimum recommended value 70%). Now follow these steps below :
1) Connect your phone in MTP (Media Transfer Port) mode with your PC.
2) Open PC Companion and wait phone to be detected, after detection go to update option and click Repair My Phone/Tablet.
3) Leave the device until repair finishes.
Another method :
1) Flash 4.1.2 firmware from here Xperia SP 4.1.2
2) Flash it via Flashtool.
3) Extract the Kernel.sin from the stock FTF file (Android 4.3) you previously have downloaded.
4) Open Flashtool (By Androxyde) and then open tools->sin editior and select Kernel.sin where ever you extracted it.
5) Click extract data and wait.
6) Once you get the kernel.elf file rename it to boot.img.
7) Flash it as kernel via Flashtool.
8) Now select the stock FTF (Android 4.3) you downloaded and then before flashing look into right side you'll see an exclude option box.
9) Exclude kernel.sin and flash the FTF.
Check and see if any of the above methods work for you.
Hit thanks if I helped you.

Tech N You said:
Make sure your phone is fully charged (minimum recommended value 70%). Now follow these steps below :
1) Connect your phone in MTP (Media Transfer Port) mode with your PC.
2) Open PC Companion and wait phone to be detected, after detection go to update option and click Repair My Phone/Tablet.
3) Leave the device until repair finishes.
Another method :
1) Flash 4.1.2 firmware from here Xperia SP 4.1.2
2) Flash it via Flashtool.
3) Extract the Kernel.sin from the stock FTF file (Android 4.3) you previously have downloaded.
4) Open Flashtool (By Androxyde) and then open tools->sin editior and select Kernel.sin where ever you extracted it.
5) Click extract data and wait.
6) Once you get the kernel.elf file rename it to boot.img.
7) Flash it as kernel via Flashtool.
8) Now select the stock FTF (Android 4.3) you downloaded and then before flashing look into right side you'll see an exclude option box.
9) Exclude kernel.sin and flash the FTF.
Check and see if any of the above methods work for you.
Hit thanks if I helped you.
Click to expand...
Click to collapse
Hi bro,
As you described here, is it possible to run 4.1 kernel on 4.3 without problems?

kelumsd said:
Hi bro,
As you described here, is it possible to run 4.1 kernel on 4.3 without problems?
Click to expand...
Click to collapse
Read carefully I never said him to switch his phone on.
I am saying do this procedure without turning the phone on.

Tech N You said:
Make sure your phone is fully charged (minimum recommended value 70%). Now follow these steps below :
1) Connect your phone in MTP (Media Transfer Port) mode with your PC.
2) Open PC Companion and wait phone to be detected, after detection go to update option and click Repair My Phone/Tablet.
3) Leave the device until repair finishes.
Another method :
1) Flash 4.1.2 firmware from here
2) Flash it via Flashtool.
3) Extract the Kernel.sin from the stock FTF file (Android 4.3) you previously have downloaded.
4) Open Flashtool (By Androxyde) and then open tools->sin editior and select Kernel.sin where ever you extracted it.
5) Click extract data and wait.
6) Once you get the kernel.elf file rename it to boot.img.
7) Flash it as kernel via Flashtool.
8) Now select the stock FTF (Android 4.3) you downloaded and then before flashing look into right side you'll see an exclude option box.
9) Exclude kernel.sin and flash the FTF.
Check and see if any of the above methods work for you.
Hit thanks if I helped you.
Click to expand...
Click to collapse
to flash boot.img fastboot mode is not working??????

kelumsd said:
Which gerion of ftf are you flashed? Where you downloaded from? Some ftf file is come with carrier locked.
Click to expand...
Click to collapse
(Xperia SP (C5302)_12.0.A.1.211_Customized IN 1272-1094 R6A) downloaded from xda forum....!!!!

THE KING of kings said:
(Xperia SP (C5302)_12.0.A.1.211_Customized IN 1272-1094 R6A) downloaded from xda forum....!!!!
Click to expand...
Click to collapse
Flash this latest update with Flashtool and feedback pls.... :good:
http://forum.xda-developers.com/xperia-sp/general/ftf-12-1-1-207-generic-au-xperia-sp-t2856432

THE KING of kings said:
(Xperia SP (C5302)_12.0.A.1.211_Customized IN 1272-1094 R6A) downloaded from xda forum....!!!!
Click to expand...
Click to collapse
I didn't say use fastboot mode. Use Flashtool

Tech N You said:
I didn't say use fastboot mode. Use Flashtool
Click to expand...
Click to collapse
how to use flashtool to flash boot.img ????

Usee tool called universal AIO flasher download it from xda oor use Rashr from play store. I'll not be responsible for your dead device if anything happens.
Sent from my C5302 using XDA Free mobile app

Tech N You said:
Usee tool called universal AIO flasher download it from xda oor use Rashr from play store. I'll not be responsible for your dead device if anything happens.
Sent from my C5302 using XDA Free mobile app
Click to expand...
Click to collapse
your method won't work for me the problem is not fixed
it again shows the same invalid card

THE KING of kings said:
your method won't work for me the problem is not fixed
it again shows the same invalid card
Click to expand...
Click to collapse
Search for baseband fix on forum for xsp you'll get it. try that

do you have backup of your TA partition? try restoring it

it's same problem with my friend,so i hope to get fix solution in this problem
sorry my english is very very bad

not good ideas
It's same problem, my device is sony xperia c5302
I'm used this tutorial from xda fix baseband not work
Please http://forum.xda-developers.com/xperia-sp/general/how-to-fix-network-baseband-missing-imei-t2865378
My device is invalid card
Please help me...

I would suggest flashing the baseband from Flashtool.
For Flashable Zips, you may want to flash the ones I made here:
http://forum.xda-developers.com/xperia-sp/general/stock-components-flashable-zips-t3184111
Edit: Sorry, it seemed my files are inaccessible
Newer edit: The files are up again

any solution for this problem?
i have the same.

my pc isnt recognising my xperia c5306 im stuck at the bootloader tried updating drivers but doesnt work
please help me

Related

minicm7-2.0.7 installation error

this baseband is not compatible with this ROM
update to baseband : M76XX-TSNCJOLYM-53404015 first ...cannot install
anybody knows how to update baseband????
xperiax856 said:
this baseband is not compatible with this ROM
update to baseband : M76XX-TSNCJOLYM-53404015 first ...cannot install
anybody knows how to update baseband????
Click to expand...
Click to collapse
flash ur phone with SEUS/PCC to have the latest baseband
http://forum.xda-developers.com/showthread.php?t=875688
kirmada said:
flash ur phone with SEUS/PCC to have the latest baseband
http://forum.xda-developers.com/showthread.php?t=875688
Click to expand...
Click to collapse
SEUS or PCC? I did it with FlashTool instead.
Search in the forums, there are tons of topics about changing baseband. Notice that doing it is easy but risky, because it is possible to brick your phone.
Here you have a baseband collection to flash in your X8 depending on if it is E15i or E15a:
http://forum.xda-developers.com/showthread.php?t=976538
GaBOr1 said:
SEUS or PCC? I did it with FlashTool instead.
Search in the forums, there are tons of topics about changing baseband. Notice that doing it is easy but risky, because it is possible to brick your phone.
Here you have a baseband collection to flash in your X8 depending on if it is E15i or E15a:
http://forum.xda-developers.com/showthread.php?t=976538
Click to expand...
Click to collapse
yes can do with flashtool too,but even with seus or pcc too,he can try with any of these whichever helps him betta
GaBOr1 said:
SEUS or PCC? I did it with FlashTool instead.
Search in the forums, there are tons of topics about changing baseband. Notice that doing it is easy but risky, because it is possible to brick your phone.
Here you have a baseband collection to flash in your X8 depending on if it is E15i or E15a:
http://forum.xda-developers.com/showthread.php?t=976538
Click to expand...
Click to collapse
i had only available option is flashtool(pcc hangs my system at SEMC FLASH DEVICE...DIDNT tried SEUS)
I did it with FlashTool
Click to expand...
Click to collapse
for goodness can u please provide me simple step by step instructions how to update baseband using flashtool !!! iam very new to flashtool .
already downloaded flashtool waiting for ur instructions
Well, you can know your phone model by checking it in Settings>About. You'll see there if it is E15a or E15i.
Before continuing, check the following things:
You have installed Sony Ericsson's drivers (if you installed PCC, it should be right).
Your phone is rooted.
I don't know if this is necessary, but enable "USB debugging" in Settings>Applications>Development>"USB debugging". If you rooted your phone, this should be already set.
Your phone is not connected to the PC.
Download the correct baseband depending on the model:
http://forum.xda-developers.com/showthread.php?t=976538
Download FlashTool:
http://forum.xda-developers.com/showthread.php?t=986697
Extract the downloaded FTF file into the folder "Firmwares" from the FlashTool main folder.
Run FlashTool and press "Flash" (the lightning icon), and select the first option. In the next form, select the right firmware on the left, and ALL the files on the right.
After accepting, you'll be shown some instructions to plug your phone. But before that, turn off your phone, wait some seconds, remove the battery and put it on again. With the phone still off, press "Back" button and connect it to the PC (without releasing the button).
You'll see when Flashtool finishes its work, and you'll be able to unplug the phone. Turn it on to check everything is OK.
You're done.
As I said in a previous post... this is a bit risky and I recommend you seeing some other topics about upgrading baseband.

[Q] FTF file cant be seen in flashtool please help

Hi friends i wan to install Curiosity ROM for my xperia t and my boatloader is locked due rooting it so i have to follow these steps
Use flashtool to flash any generic 7.0.A.1.303 ftf.
- Root using Bin4ry's method.
- Install CMW for locked bootloaders.
- Download ROM and CWM & with Reboot fix, and copy them to internal/SD memory.
- Enter recovery, and make wipes [wipe data / factory reset, and also wipe dalvik cache (advanced ---> Wipe Dalvik Cache)].
- Flash the ROM, and followed before reboot the CMW Recovery for locked bootloaders.
- Flash stock kernel .489 with Flashtool.
- Reboot, and after entering PIN, wait for a couple of minutes.
- Recommended restart again before start working.
I have downloaded ftf file and pasted it in firmwares but flashtool is not showing that file plz help
Hello,
Try and drag-and-drop the ftf file into the flashtool window.
Hit thanks if helped.
Cheers,
Lunar.
sent from my T.
lunarjetman1 said:
Hello,
Try and drag-and-drop the ftf file into the flashtool window.
Hit thanks if helped.
Cheers,
Lunar.
sent from my T.
Click to expand...
Click to collapse
I tried it doesn't work
I have downloaded from http://forum.xda-developers.com/showthread.php?t=1918397 generic 7.0.A.1.303 ftf. file but actually thats a zip file not ftf
Can you tell me how to convert that file to ftf
Extract it using Windows explorer.
Also, in flashtool when you browse for the ftf file it does not show the ftf file. Just browse to the folder where it is and click ok. You will see the voice of ftf files in the next dialogue box
Sent from my star trek communicator
Sony Flagship device circa 2145
gregbradley said:
Extract it using Windows explorer.
Also, in flashtool when you browse for the ftf file it does not show the ftf file. Just browse to the folder where it is and click ok. You will see the voice of ftf files in the next dialogue box
Sent from my star trek communicator
Sony Flagship device circa 2145
Click to expand...
Click to collapse
after doing what you told me to do i got this what i shouild do next ??
After extracting it there is no ftf file in there ??
Zahid Ali said:
after doing what you told me to do i got this what i shouild do next ??
Click to expand...
Click to collapse
Attach the phone in flashmode
Zahid Ali said:
After extracting it there is no ftf file in there ??
Click to expand...
Click to collapse
Dont worry, I can see from your screenshot that flashtool has loaded the ftf file. Just attach in flashmode and it will go through the process.
If you do not know how to enter flashmode then read this which is what I suggest all new users do before they decide to start flashing and rooting
gregbradley said:
Attach the phone in flashmode
Dont worry, I can see from your screenshot that flashtool has loaded the ftf file. Just attach in flashmode and it will go through the process.
If you do not know how to enter flashmode then read this which is what I suggest all new users do before they decide to start flashing and rooting
Click to expand...
Click to collapse
Thanks I worked . Sorry i can't hit thanks button cause i have reached limit
Zahid Ali said:
Thanks I worked . Sorry i can't hit thanks button cause i have reached limit
Click to expand...
Click to collapse
¡¡¿¿There is a limit for that??!!.
Yeah 8 thanks per day for me
Sent from my LT30p using xda app-developers app
lunarjetman1 said:
Hello,
Try and drag-and-drop the ftf file into the flashtool window.
Hit thanks if helped.
Cheers,
Lunar.
sent from my T.
Click to expand...
Click to collapse
Hello,
i have the same problem, i downloaded and extracted the FTF files and located them in several carpets, no location let the flashtool recognize the file, also can´t drag and drop,
using windows 10 64b
Got the firmware from here;}:
http://www.firmwaremobile.com/index.php/xperiadownload/category/22-go
tried the last two,
Thank you.

Phone dead??

I tried to instaal CWM recovery,it worked but when I tried to instaal a different kernel the phone frooze
and I cant connect it to flashtool again.
It wont startup again screen stays black.
Phone is new,what can I do to restore it to firmware??
Please help a noob!
[email protected] said:
I tried to instaal CWM recovery,it worked but when I tried to instaal a different kernel the phone frooze
and I cant connect it to flashtool again.
It wont startup again screen stays black.
Phone is new,what can I do to restore it to firmware??
Please help a noob!
Click to expand...
Click to collapse
Custom kernel flashing requires an unlocked bootloader. Hoping that your phone is new, it would be locked!
First install the drivers (XZ drivers, flash mode and fastboot drivers) from drivers folder of flashtool (For flashtool, download the beta version from Xperia Z Original Development forum page than the 0.9.10.1 version- it doesn't support Z)
Next download the firmware of your choice. Make sure it isn't corrupted!
Switch off your mobile but DON'T connect!
Paste the downloaded firmware in firmwares folder of flashtool.
Open flashtool, select flash mode and select the firmware you copied!
It says that it is preparing files, let it do (about 5-10 mins)
After that, a dialog pops up saying that to connect the device, now hold the volume down button and try connecting the device. The flashing should start!
gire.prasad said:
Custom kernel flashing requires an unlocked bootloader. Hoping that your phone is new, it would be locked!
First install the drivers (XZ drivers, flash mode and fastboot drivers) from drivers folder of flashtool (For flashtool, download the beta version from Xperia Z Original Development forum page than the 0.9.10.1 version- it doesn't support Z)
Next download the firmware of your choice. Make sure it isn't corrupted!
Switch off your mobile but DON'T connect!
Paste the downloaded firmware in firmwares folder of flashtool.
Open flashtool, select flash mode and select the firmware you copied!
It says that it is preparing files, let it do (about 5-10 mins)
After that, a dialog pops up saying that to connect the device, now hold the volume down button and try connecting the device. The flashing should start!
Click to expand...
Click to collapse
Thxs for your answer.
I got it restored to original.
I just wont to install the cm 10.1 kernel and then the cm10.1 rom.
They say I have to extract the kernel,when I unrar the firmware do I use the boot.img?
How do I do extract the kernel on Sony?
When I connect to flashtool it doesnt give me the option to unlock,so i presume its unlocked?
How can I check?
Ive been flashing my Note for a year now,but this is somewhat different.
To go onto cm 10 or as op (4.2.2) you need to unlock your bootloader
If you want to use Cm roms First you need to know if you can unlock it by dialing *#*#7378423#*#* >service info > configuration and look under bootloader unlock no means can't be unlocked, yes means you can, if you do unlock it make sure you back up your TA partition
There are tutorials on how to unlock bl and even on Sony unlock how to do it
Edit: to try, try and flash doom lords Xperia v6 kernel if it fails then you are still locked
Sent from my C6603 using xda premium
[email protected] said:
Phone is new,what can I do to restore it to firmware??
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2153167

[Q]HOW TO convert zip to ftf file..try almost all xda methods cant success..

i tried almost all metods to convert zip to ftf but cant got success...kindly help guyz so I can ROOT MY Z1....PLZZ
You don't have to "Convert" but just to rename the extensions of the file to flash it. For example if it is C6903_Unbranded.zip you have change it to C6903_Unbranded.ftf. If you do not see the extensions on your PC go to Control Panel > Appearance and Personalizations > Folder Options > View, then uncheck "Hide extensions for known file types", now you can rename it, flash it and click thanx.
done what you say
eclyptos said:
You don't have to "Convert" but just to rename the extensions of the file to flash it. For example if it is C6903_Unbranded.zip you have change it to C6903_Unbranded.ftf. If you do not see the extensions on your PC go to Control Panel > Appearance and Personalizations > Folder Options > View, then uncheck "Hide extensions for known file types", now you can rename it, flash it and click thanx.
Click to expand...
Click to collapse
i done adject what u say rename..file become ftf..but flashtool is showing blank when i click on black flash button..CANT HELP BRO
pathanraj said:
i done adject what u say rename..file become ftf..but flashtool is showing blank when i click on black flash button..CANT HELP BRO
Click to expand...
Click to collapse
Did you put the FTF file in folder of Flashtool?
yaa i put files
eclyptos said:
Did you put the FTF file in folder of Flashtool?
Click to expand...
Click to collapse
I put file in c firmware folder but cant..also when I try to bind zip files from flash tool,the flash tool select folder but cant show files...I tried everything kindly give me tested solution.thanx
pathanraj said:
I put file in c firmware folder but cant..also when I try to bind zip files from flash tool,the flash tool select folder but cant show files...I tried everything kindly give me tested solution.thanx
Click to expand...
Click to collapse
I don't know if this make difference but it should be in C:\Program Files\Flashtool\firmwares. Then if you can see yet the FTF that mean is something wrong with flashtool or the file which you downloaded. When I downloaded the file from NUT link I don't get .zip file but a normal .ftf file so I don't know yours where it come from but one guy had the same problem like yours and he just renamed the file and everything was gone fine. Try to download the file from different source. On this Video Tutorial by Shem, in descriptions there are links to download the .534 ftf by NUT, redownload again and let me know.
i downld the same
pathanraj said:
I put file in c firmware folder but cant..also when I try to bind zip files from flash tool,the flash tool select folder but cant show files...I tried everything kindly give me tested solution.thanx
Click to expand...
Click to collapse
I flash .514 ftf of c6903 in c6902 and my device got stuck at XPERIA... ....downloading again ftf while from mega..hope will work..
and I wnt know that when I flash c6902 ftf my device will start or not??
pathanraj said:
I flash .514 ftf of c6903 in c6902 and my device got stuck at XPERIA... ....downloading again ftf while from mega..hope will work..
and I wnt know that when I flash c6902 ftf my device will start or not??
Click to expand...
Click to collapse
You have to flash the right FTF for you device and then it will work. Then you have C6902 model? You should said this before. Anyway how you flashed the phone, did you solved the issue?
i flashed c6903 phone stuck
eclyptos said:
You have to flash the right FTF for you device and then it will work. Then you have C6902 model? You should said this before. Anyway how you flashed the phone, did you solved the issue?
Click to expand...
Click to collapse
sir i flashed .514 of c6903..my model is c6902...would u give me suggestion that to downgrade z1 which .ftf is better..in ur suggested video he is saying that if u have to downgrade it with .514 u will not loose IMIE..kindly suggest me weather i downgrade with .290 or .514 to root my z1..i want to keep my boatloader locked bcoz i want to backup TA..so SIR PLZ HELP ME TO GET OUT
What the hell are you doing? Who told you to flash .514? It do not exist. Download from HERE the C6902 14.1.G.2.257 Commercial/Journalist 1277-1348_R1A and flash it on your phone. Turn on your phone and check if everything is ok, switch it off and hold volume down and connect in flashmode, then Downgrade again to C6902 14.1.G.1.534 Generic TW, Root this Firmware with Bin4ry Application and when you are rooted then follow the instruction to update to .290 from HERE, then update again to .136 from HERE. Read carefully all the instructions. This method is for Locked Bootloader and if you do all correctly you will have .136 fully rooted.
thanx for help
eclyptos said:
What the hell are you doing? Who told you to flash .514? It do not exist. Download from HERE the C6902 14.1.G.2.257 Commercial/Journalist 1277-1348_R1A and flash it on your phone. Turn on your phone and check if everything is ok, switch it off and hold volume down and connect in flashmode, then Downgrade again to C6902 14.1.G.1.534 Generic TW, Root this Firmware with Bin4ry Application and when you are rooted then follow the instruction to update to .290 from HERE, then update again to .136 from HERE. Read carefully all the instructions. This method is for Locked Bootloader and if you do all correctly you will have .136 fully rooted.
Click to expand...
Click to collapse
i will do the same and tell u result..thanx for support..

[Q] Forgot to turn on usb debug before flashing,now stuck in bootloop

Okay.
So I tried to root my xperia z with 10.4.1.B.0.101 firmware today.
but I forgot to turn on my usb debug before using flashtool to flash in a 10.3.1.A.2.67 firmware
Now my phone is stuck in a bootloop
Btw, my phone have a locked bootloader.
I am trying to flash the firmware to 10.4.1.B.0.101 again and I will try to process the root
What should I do now?
I would give any extra information if needed
ElwinHoTin said:
Okay.
So I tried to root my xperia z with 10.4.1.B.0.101 firmware today.
but I forgot to turn on my usb debug before using flashtool to flash in a 10.3.1.A.2.67 firmware
Now my phone is stuck in a bootloop
Btw, my phone have a locked bootloader.
I am trying to flash the firmware to 10.4.1.B.0.101 again and I will try to process the root
What should I do now?
I would give any extra information if needed
Click to expand...
Click to collapse
Try to reflash 10.2.1.A.2.67 and make sure to check wipe is enabled
ElwinHoTin said:
Okay.
So I tried to root my xperia z with 10.4.1.B.0.101 firmware today.
but I forgot to turn on my usb debug before using flashtool to flash in a 10.3.1.A.2.67 firmware
Now my phone is stuck in a bootloop
Btw, my phone have a locked bootloader.
I am trying to flash the firmware to 10.4.1.B.0.101 again and I will try to process the root
What should I do now?
I would give any extra information if needed
Click to expand...
Click to collapse
You can flash the latest kitkat ftf via flashtool.
The firmware can be rooted
androidtweaker1 said:
You can flash the latest kitkat ftf via flashtool.
The firmware can be rooted
Click to expand...
Click to collapse
I tried to flash in the kit kat firmware,
but I am still stuck in the bootloop...
How can I turn on my usb debug and third party source?
I think is that not allowing me to flash anything in....
ElwinHoTin said:
Okay.
So I tried to root my xperia z with 10.4.1.B.0.101 firmware today.
but I forgot to turn on my usb debug before using flashtool to flash in a 10.3.1.A.2.67 firmware
Now my phone is stuck in a bootloop
Btw, my phone have a locked bootloader.
I am trying to flash the firmware to 10.4.1.B.0.101 again and I will try to process the root
What should I do now?
I would give any extra information if needed
Click to expand...
Click to collapse
I had the same problem , what I did was , i just flashed the old 4.3 FTF using flashtool which fixed it
Mr.KiLLeR said:
I had the same problem , what I did was , i just flashed the old 4.3 FTF using flashtool which fixed it
Click to expand...
Click to collapse
By old 4.3 ftf
Do you mean 10.4.1.B.0.101 ?
I am really new and I am noob
Sorry for bothering you guys...
ElwinHoTin said:
By old 4.3 ftf
Do you mean 10.4.1.B.0.101 ?
I am really new and I am noob
Sorry for bothering you guys...
Click to expand...
Click to collapse
Yes exactly ..
Mr.KiLLeR said:
Yes exactly ..
Click to expand...
Click to collapse
I am trying to download the C6603 10.4.1.B.0.101 Generic HK ftf
Which should be what I have in my phone originally
Is that the one I should use?
Or I can just flash in any 10.4.1.B.0.101 ftf?
ElwinHoTin said:
I am trying to download the C6603 10.4.1.B.0.101 Generic HK ftf
Which should be what I have in my phone originally
Is that the one I should use?
Or I can just flash in any 10.4.1.B.0.101 ftf?
Click to expand...
Click to collapse
any one dude.. dont worry
Mr.KiLLeR said:
any one dude.. dont worry
Click to expand...
Click to collapse
It worked
Thank you soooooo much
You have saved my life
ElwinHoTin said:
It worked
Thank you soooooo much
You have saved my life
Click to expand...
Click to collapse
Gr8 I am glad that I helped ENJOY :good:
Same problem
hplease help me.. its not orking when i reflash it with 4.3 (i already had)
Xperia z3 D6653
Ok so I was trying to flash my z3 back to original Sony software because I was getting an error message in PC companion saying my phone cannot be updated because it contains modified software and I was flashing it using sony mobile flasher by androxyde and I forgot to enable USB debugging and unknown sources and now it's in a boot loop telling me "software update failed. Please plug your phone back in and try again"
Any ideas?
I was told to try using a different computer?
Hi all, if anyone is having trouble flashing with flash tool because usb debugging isn't enabled error then do this procedure.......
1. Dowload latest flash tool 0.9.18.8 and also version 0.6.6
2. Try use the latest version first to Flash the tft rom. NOTE: remember the file it has error flashing e.g on my experia sp file system.sin was not able to Flash bcoz usb debugging error (enable usb debugging and unknown sources) ALL THE REST of the files flashed ok!
3.try flash again the rom but this time tick system.sin (or error file) in flashtool to exclude it from flashing. Make sure all other files are included. Also tick all wipe caches options and flash rom without system.sin (or error file).
4. Flash procedure will work. Now disconnect phone and leave it off without restarting it.
5. Uninstall flashtool latest version 0.9.18.8 and install flashtool 0.6.6 old version and open it to Flash the same rom BUT THIS TIME only select the system.sin file (or error file) to be flashed and rest excluded. Make sure all wipe options in flashtool are enabled and Flash! THE FLASH WILL WORK WITHOUT USB DEBUGGING ERROR and your phone will be fixed!
Press thanks if it helped!

Categories

Resources