hi everyone, im a newbie and im having a little trouble understanding and fixing my phone.
so ill start at the beginning, i bought a note 3 from at&t N900A and then moved out of the US (after contract expired and i sim unlocked with the code they gave me.)
I could not connect to at&t servers from outside US to OTA update. (i dont remember if i was mj5 or mi9)
So i learned about rooting while trying to update and decided to use kingo root app and got root access
then i installed safestrap 3.71 for a custom recovery, then i backed up my stock rom and made a new rom slot. Then i resorted my stock rom to rom slot 1.
this is my mistake: i flashed the knoxraid rom from here
http://galaxynote3root.com/att-galaxy-note-3-roms/knoxraid-kitkat-rom-for-att-galaxy-note-3/
however i forgot to do the data/factory wipe. To make matters worse i realized this and pulled the battery out after about 20 seconds (the download bar was about 10% complete)
when i put the battery back in the phone went straight to recovery (recovery and download mode were the only ones working)
i started panicking as this was my first time rooting/installing roms and tried to find a solution
i found one and used this:
http://www.droidviews.com/how-to-unbrick-att-galaxy-note-3-sm-n900a/
i flashed all the files correctly and odin got to about 95% and the said FAIL
i panicked again when i turned my phone on and it went to an error screen saying firmware upgrade incountered an issue etc.
before i harm my device further i would like to know what to do (i can still get to download mode)
odin mode say it is A2 so i belive that is mj5
i want to know: should i reflash stock mj5, and if so please provide link
should i do this: http://forum.xda-developers.com/showpost.php?p=48243768&postcount=1
should i use the N900AUCUBMI9_OneClickBin.exe
or should i flash nc2 files found here: http://forum.xda-developers.com/note-3-att/general/n900aucucnc2-odin-files-t2838117
will the nc2 kitkat brick my device? keep in mind it is running A2 which im sure is mj5
Thank you everyone in advance
NC2 won't brick your device, but it'll upgrade your bootloader to A3 which will prevent you from ever downgrading back to MJ5 (not that you'd want to anyway). I'd just go with NC2 since it's rootable with TowelRoot anyway. Also, in your case I'd recommend using the 4-file method rather than the 1-file method since it's an upgrade from 4.3 rather than just a restore to stock 4.4.2.
Sent from my AT&T Galaxy Note 3 using Tapatalk®
andygev35 said:
NC2 won't brick your device, but it'll upgrade your bootloader to A3 which will prevent you from ever downgrading back to MJ5 (not that you'd want to anyway). I'd just go with NC2 since it's rootable with TowelRoot anyway. Also, in your case I'd recommend using the 4-file method rather than the 1-file method since it's an upgrade from 4.3 rather than just a restore to stock 4.4.2.
Sent from my AT&T Galaxy Note 3 using Tapatalk®
Click to expand...
Click to collapse
thank you
infinitephase said:
thank you
Click to expand...
Click to collapse
You might want to consider adding the Pit file too to repartition your phone just in case anything got messed up in the failed odin flash that would definitely clean everything up. It might be overkill but I don't think it would hurt to do since you're doing a factory reset with the 4-file install anyway
Related
Hey guys so recently I had rooted my i537 S4 active and have been researching and modifying here and there until i decided to get a custom ROM. I found WickedROM via this post http://forum.xda-developers.com/show....php?t=2491762 and considering it had worked on this person's i537 I decided to flash the ROM. After flashing I had become stuck in a bootloop and I can't get to anything besides DOWNLOAD MODE. Due to this problem I decided to run a stock firmware via Odin with this one_click http://rootzwiki.com/topic/44121-sgh...axy-s4-active/ ... this filled up until the bar was about 90% and then all of a sudden fails at <ID:0/003> system.img.ext4. I've tried other firmwares with no luck and have resorted to posting about this problem. please help and guide me in the right direction, my phone's been bricked for 3 days now. Trying to boot into recovery gives me the "there's been a problem with your firmware update, please run in Kies recovery" and Kies doesn't recognize my phone.
nickeon1 said:
After flashing I had become stuck in a bootloop and I can't get to anything besides DOWNLOAD MODE.
Click to expand...
Click to collapse
You forgot to flash the masterpatch which makes roms designed for the AT&T S4 (not active) work for our phone. If I understand correctly it needs to be flashed immediately after the rom is installed (i.e. still in SafeStrap, before you attempt to boot up).
nickeon1 said:
Due to this problem I decided to run a stock firmware via Odin with this one_click http://rootzwiki.com/topic/44121-sgh...axy-s4-active/ ... this filled up until the bar was about 90% and then all of a sudden fails at <ID:0/003> system.img.ext4 and Kies doesn't recognize my phone.
Click to expand...
Click to collapse
That link is for MF1, an outdated firmware. Here is a collection of stock i537 firmwares. I can personally confirm the NH3 file is usable since I used it to upgrade to the most recent firmware without losing root.
This thread will provide you instructions on how to use Odin to flash any stock firmware. I can only add I recommend using Odin v3.07, as I've used it with the most success and fewest issues. Also use NH3 firmware or at the very least NE3, because anything else is outdated, assuming you were on stock KitKat originally, and you will encounter similar issues if trying to downgrade to jellybean.
Also flashing with Odin deletes all your saved files/user info etc. on your phone. From the sound of it, fixing your phone is going to involve inevitably wiping it one way or the other, so I hope you have a backup saved somewhere other than your phone's internal memory.
nickeon1 said:
Hey guys so recently I had rooted my i537 S4 active and have been researching and modifying here and there until i decided to get a custom ROM. I found WickedROM via this post http://forum.xda-developers.com/show....php?t=2491762 and considering it had worked on this person's i537 I decided to flash the ROM. After flashing I had become stuck in a bootloop and I can't get to anything besides DOWNLOAD MODE. Due to this problem I decided to run a stock firmware via Odin with this one_click http://rootzwiki.com/topic/44121-sgh...axy-s4-active/ ... this filled up until the bar was about 90% and then all of a sudden fails at <ID:0/003> system.img.ext4. I've tried other firmwares with no luck and have resorted to posting about this problem. please help and guide me in the right direction, my phone's been bricked for 3 days now. Trying to boot into recovery gives me the "there's been a problem with your firmware update, please run in Kies recovery" and Kies doesn't recognize my phone.
Click to expand...
Click to collapse
When you flash back to stock, you can only flash a version that is equal to or greater than the version you were already on. So if you were originally on 4.4.2 you can only flash a 4.4.2 stock ROM, any other ROM will fail to flash.
thisisapoorusernamechoice said:
You forgot to flash the masterpatch which makes roms designed for the AT&T S4 (not active) work for our phone. If I understand correctly it needs to be flashed immediately after the rom is installed (i.e. still in SafeStrap, before you attempt to boot up).
That link is for MF1, an outdated firmware. Here is a collection of stock i537 firmwares. I can personally confirm the NH3 file is usable since I used it to upgrade to the most recent firmware without losing root.
This thread will provide you instructions on how to use Odin to flash any stock firmware. I can only add I recommend using Odin v3.07, as I've used it with the most success and fewest issues. Also use NH3 firmware or at the very least NE3, because anything else is outdated, assuming you were on stock KitKat originally, and you will encounter similar issues if trying to downgrade to jellybean.
Also flashing with Odin deletes all your saved files/user info etc. on your phone. From the sound of it, fixing your phone is going to involve inevitably wiping it one way or the other, so I hope you have a backup saved somewhere other than your phone's internal memory.
Click to expand...
Click to collapse
Thanks very much for this! I flashed an NE3 firmware and was able to get my phone in working condition. So if I wanted to flash a rom on my phone I would have to masterpatch AFTER the rom flash via Safestrap?
nickeon1 said:
Thanks very much for this! I flashed an NE3 firmware and was able to get my phone in working condition. So if I wanted to flash a rom on my phone I would have to masterpatch AFTER the rom flash via Safestrap?
Click to expand...
Click to collapse
Yes, but make sure the phone doesn't reboot in between flashing the ROM and flashing the Masterpatch.
(RESOLVED)
Alright so in order to not bore you all, ill get to the point. I messed up trying to do impossible things with my I537 because I didn't read any forums before trying... stupid I know. That being said I now have a "soft bricked" phone stuck in download mode. I have been looking around (I assume not hard enough) for the right file to flash with ODIN to get me back up and running so I can actually do my research this time before playing with different stock roms.
Can anyone point me in the right direction to get the right files to unbrick this thing?
First things first: this forum is for the SGH-I537 AT&T Galaxy S4 Active, not the I527 Galaxy Mega. I just want to make sure you have the right device. If you have the Mega (I527), you want this forum, and ignore the rest of this post.
If you do in fact have the Galaxy S4 Active (I537), then check out this thread, it has all the official firmware files that have been released for this device. I would recommend using the firmware files for NE3 (KitKat) to flash in Odin. The NE3 build is the easiest to root, and you can always use the keep-root method to upgrade to lollipop if you so desire.
Oh yes sorry that was a mistype. I did indeed mean to type I537. Ok Ill give this a shot and update on how it goes.
Ok so Im currently downloading the Full Odin package, but I have already rooted the phone with towelroot. Is that going to be an issue?
Nah it won't be a problem. Flashing firmware files with Odin will unroot your phone (it resets everything to original factory settings). You can always reroot with towel root again
Ok new problem though, I was able to get everything flashed through ODIN, it restarts; then I get the Samsung boot screen, att boot screen and then it just goes black. I put it back into download mode and tried to re-flash it a couple times but it keeps doing the same thing. Thoughts? This Is the section I got the file from;
I537UCUCNE3 (4.4.2) Released 2014-06-06 - OFFICIAL
Issue has been solved, I just had a battery issue but after changing that and letting the phone charge up it started up great. Thanks for all your help "thisisapoorusernamechoice"
I rooted with towel root NC2 and safe strap and was using some roms like firekat and firenote but they didnt change the kernel. Recently I downloaded one of the lollipop alliance roms and installed on the stock slot and it changed my kernel to OC1. Now safe strap doesn't work and I want to go back to where I was before. I wouldn't mind going to a lollipop rom that is rooted. Or just plain stock rom that is rooted. I need help since there is so many different tutorials and methods and things to download. I'm newer on the rooting and such, so any help is appreciated. I am able to use the phone still it just doesn't cycle thru safe strap on the boot like it did before and sometimes it won't even boot up it just freezes and I have to factory reset to get it back. So I quit restarting. I'm limping on one leg so to speak. I assume I have installed something wrong and I just want guidance towards something rooted and stockish. Link me a tutorial or something or just give it to me straight. I have better than average skills in this but I mainly follow guides of some kind. So keep it as simple as possible. Thanks
thedirkalater said:
I rooted with towel root NC2 and safe strap and was using some roms like firekat and firenote but they didnt change the kernel. Recently I downloaded one of the lollipop alliance roms and installed on the stock slot and it changed my kernel to OC1. Now safe strap doesn't work and I want to go back to where I was before. I wouldn't mind going to a lollipop rom that is rooted. Or just plain stock rom that is rooted. I need help since there is so many different tutorials and methods and things to download. I'm newer on the rooting and such, so any help is appreciated. I am able to use the phone still it just doesn't cycle thru safe strap on the boot like it did before and sometimes it won't even boot up it just freezes and I have to factory reset to get it back. So I quit restarting. I'm limping on one leg so to speak. I assume I have installed something wrong and I just want guidance towards something rooted and stockish. Link me a tutorial or something or just give it to me straight. I have better than average skills in this but I mainly follow guides of some kind. So keep it as simple as possible. Thanks
Click to expand...
Click to collapse
Safestrap doesn't work with kernels newer than NC2, so in order for safestrap to work, you can do either of the following things-
1. The simpler way (do this if after getting safestrap to work again, you want to install a pre-rooted stock OC1 ROM) : Install the apk NC2flasher. It'll flash the NC2 kernel and then when you reboot, you'll get access to safestrap once again. Download it from http://forum.xda-developers.com/attachment.php?attachmentid=3452253&d=1440595672. Before installing the apk, download the pre-rooted OC1 stock rom from here: https://www.androidfilehost.com/?fid=95916177934549604 and place it on your device storage/extSD card. After rebooting into safestrap, factory reset and flash the zip and you're good to go!
2. The more intensive way (do this if you want to rollback to NC2 stock completely):
Download odin from here: http://forum.xda-developers.com/showthread.php?t=2711451
Download the stock odin flashable NC2 files from here: https://mega.nz/#F!wg5wRQrQ!vR7a6pze9dgSWjbaRSyhWA
Warning: These are data_wipe tars, so take complete backup since the internal memory of the device will be erased completely (backup to PC/cloud/extSD card)
Put your phone in the download mode; it can be done through pressing the volume down and home button simultaneously while powering up the phone.
You'll notice that the 2 starting characters of the files (BL,AP,CP and CSC) are the same as the options found in Odin. Keeping the default checkboxes on the left side as they are, load the files in Odin as they match with their downloaded counterparts (ie. BL in BL, CP in CP, CSC in CSC and AP in AP) and flash it.
You're done!
Awesome thank you
So here's the story. Over a year ago I rooted my wife's phone with fireflash and the stock rooted oc4 rom. Well my wife got tired of the update popup so I decided to put it back to stock. I made a mistake I removed root thinking it would allow me to update to the latest att ota. Not the case after rebooting the phone wouldn't get past the att logo.
After this I tried wiping the cache then factory wiping the phone with the same results.
Then I tried flashing the oc4 partitions and kernel. Still no bueno.
I then tried downgrade to nce. Really no bueno. I got it to try and boot again by flashing the partitions and kernel above.
Now I'm looking for advice on how I can fix this sooner rather than later to prevent suffering the wrath of my wife.
Thanks in advance
Did removing root cause the issue, or trying to (taking the) OTA? It makes a difference which bootloader you have. And what does your bootloader read at the top (vol down+menu+power buttons at the same time, then volume key to continue)?
I believe the bootloader was of1 not oc4. As I rooted and installed oc4 through munizre's tutorial. More importantly I was able to unbrick the wife's phone by loading the full stock 5.1.1 update some gent had posted on this forum.
jdfellows said:
I believe the bootloader was of1 not oc4. As I rooted and installed oc4 through munizre's tutorial. More importantly I was able to unbrick the wife's phone by loading the full stock 5.1.1 update some gent had posted on this forum.
Click to expand...
Click to collapse
See my post here buddy. It may just save your life/phone (and prevent wrath as it did in my case).
http://forum.xda-developers.com/showpost.php?p=68297868&postcount=42
Hi Everyone,
I am kind of lost in the upgrade process.
6 months ago, my Samsung Note 3 (USA AT&T) phone was working perfectly fine, but just with OLD firmware. ,then due to urge on upgrading, i searched so many sites and found a link somewhere on droidviews.com (as my firmware was NJ1 or something, website said i need to upgrade to NC2, and then to OC1), this process messed up my phone call receiving & making capabilities.
Most of the time callers see me unreachable and I am unable to call them as i get "emergency calls only"....I still don't have a way out from this issue. Some places I read i need to install right CSC / modem etc, I even tried this thread by reflashing using ODIN & N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar. Even after this, i still have calls related issues same as above.
Can someone guide me to right direct (or) did i totally messed up with this? BTW, i am now in INDIA, using Airtel services...
I believe nj1 firmware is newer than nc2.
The Odin files came from here: https://forum.xda-developers.com/note-3-att/general/100-stock-lollipop-5-0-n900aucueoc1-t3069609 ?
audit13 said:
I believe nj1 firmware is newer than nc2.
The Odin files came from here: https://forum.xda-developers.com/note-3-att/general/100-stock-lollipop-5-0-n900aucueoc1-t3069609 ?
Click to expand...
Click to collapse
Thanks. I tried flashing to OC1, still same problem. my calls are mostly not working. Is there a way i can go back to original 4.3 stock rom that came with Note3 AT&T? or is there a way i can get current AT&T rom (latest) to try with?
Good part is, i can go between 4.4.3 and 5.0 as i have original stock roms downloaded. But bad part is, my calls still failing...
appreciate any clue/help.
Where did you get the stock ROM? AT&T never released full firmware for the 900a.
There is no way to go back fully to 4.3 since the phone bootloader can be downgraded to 4.3.
audit13 said:
Where did you get the stock ROM? AT&T never released full firmware for the 900a.
There is no way to go back fully to 4.3 since the phone bootloader can be downgraded to 4.3.
Click to expand...
Click to collapse
Hi, i downloaded NC2 & OC1 stock firmwares from XDA only. they are loading up fine (using ODIN). But my calling problem remains same.
So, Yesterday, i tried rooting the phone and installed AllianceROM. then i went into series of issues like "unfortunately NFC has stopped", "unfortunately settings has stopped" etc... then followed the instruction to wipe/factory reset, 3 to 4 times and disabled NFC services etc. As of now, phone works fine, but still need to check the calling function for a week...
thanks for your time.
audit13 said:
Where did you get the stock ROM? AT&T never released full firmware for the 900a.
There is no way to go back fully to 4.3 since the phone bootloader can be downgraded to 4.3.
Click to expand...
Click to collapse
Are we SOL with 900a? I was in the wrong forum earlier and was ready to use update to 7...until I realized it wasn't for me.
Dying on Lollipop (where I landed after the 7 fallout)
I re-read my post and noticed that I made an error: the bootloader on an n900a CANNOT be downgraded.
You cannot flash any ROM to the phone using TWRP, you must use flashfire. Only ROMs based on the stock Samsung ROM can be flashed to the n900a.
audit13 said:
I re-read my post and noticed that I made an error: the bootloader on an n900a CANNOT be downgraded.
You cannot flash any ROM to the phone using TWRP, you must use flashfire. Only ROMs based on the stock Samsung ROM can be flashed to the n900a.
Click to expand...
Click to collapse
We can flash roms using safestrap and flashfire