I rooted with towel root NC2 and safe strap and was using some roms like firekat and firenote but they didnt change the kernel. Recently I downloaded one of the lollipop alliance roms and installed on the stock slot and it changed my kernel to OC1. Now safe strap doesn't work and I want to go back to where I was before. I wouldn't mind going to a lollipop rom that is rooted. Or just plain stock rom that is rooted. I need help since there is so many different tutorials and methods and things to download. I'm newer on the rooting and such, so any help is appreciated. I am able to use the phone still it just doesn't cycle thru safe strap on the boot like it did before and sometimes it won't even boot up it just freezes and I have to factory reset to get it back. So I quit restarting. I'm limping on one leg so to speak. I assume I have installed something wrong and I just want guidance towards something rooted and stockish. Link me a tutorial or something or just give it to me straight. I have better than average skills in this but I mainly follow guides of some kind. So keep it as simple as possible. Thanks
thedirkalater said:
I rooted with towel root NC2 and safe strap and was using some roms like firekat and firenote but they didnt change the kernel. Recently I downloaded one of the lollipop alliance roms and installed on the stock slot and it changed my kernel to OC1. Now safe strap doesn't work and I want to go back to where I was before. I wouldn't mind going to a lollipop rom that is rooted. Or just plain stock rom that is rooted. I need help since there is so many different tutorials and methods and things to download. I'm newer on the rooting and such, so any help is appreciated. I am able to use the phone still it just doesn't cycle thru safe strap on the boot like it did before and sometimes it won't even boot up it just freezes and I have to factory reset to get it back. So I quit restarting. I'm limping on one leg so to speak. I assume I have installed something wrong and I just want guidance towards something rooted and stockish. Link me a tutorial or something or just give it to me straight. I have better than average skills in this but I mainly follow guides of some kind. So keep it as simple as possible. Thanks
Click to expand...
Click to collapse
Safestrap doesn't work with kernels newer than NC2, so in order for safestrap to work, you can do either of the following things-
1. The simpler way (do this if after getting safestrap to work again, you want to install a pre-rooted stock OC1 ROM) : Install the apk NC2flasher. It'll flash the NC2 kernel and then when you reboot, you'll get access to safestrap once again. Download it from http://forum.xda-developers.com/attachment.php?attachmentid=3452253&d=1440595672. Before installing the apk, download the pre-rooted OC1 stock rom from here: https://www.androidfilehost.com/?fid=95916177934549604 and place it on your device storage/extSD card. After rebooting into safestrap, factory reset and flash the zip and you're good to go!
2. The more intensive way (do this if you want to rollback to NC2 stock completely):
Download odin from here: http://forum.xda-developers.com/showthread.php?t=2711451
Download the stock odin flashable NC2 files from here: https://mega.nz/#F!wg5wRQrQ!vR7a6pze9dgSWjbaRSyhWA
Warning: These are data_wipe tars, so take complete backup since the internal memory of the device will be erased completely (backup to PC/cloud/extSD card)
Put your phone in the download mode; it can be done through pressing the volume down and home button simultaneously while powering up the phone.
You'll notice that the 2 starting characters of the files (BL,AP,CP and CSC) are the same as the options found in Odin. Keeping the default checkboxes on the left side as they are, load the files in Odin as they match with their downloaded counterparts (ie. BL in BL, CP in CP, CSC in CSC and AP in AP) and flash it.
You're done!
Awesome thank you
Related
Please help!!! I have searched and searched and searched the forums and have come across so many threads on how to add a custom rom to your Captivate.
To start, what I have been trying to do is add a custom rom after upgrading my phone from ver 2.2 to 2.3.3 GB. Some posts say you can just upgrade with the 2.3 on the phone, other posts say you need to take the phone back to the stock 2.1 rom. Then you find posts that say, make sure you have the stock bootloaders and kernals when you downgrade to the stock 2.1.
You can easily see how even a somewhat above novice can get confussed. To take my phone back to 2.1 I have followed posts that say use Odin 1.3. I have used odin before so no big deal. However in this case again you are getting different opionions and versions on this. Some have just the odin .exe and others have the .exe and the MD5 and .ini it the package. I am assuming that the one with just the .exe has everything built in as the size is quite big.
I have tried both ways and after I "Flash" it will not finish with the normal recovery mode and see the linux script. It will go to the ATT window and just keep rebooting over and over. I then will use my JIG and get back in download mode in order to reflash back to 2.3.3 just to get the phone to work again.
Can someone please give me a clue as to what I am doing wrong or direct me to the proper files and maybe some better step by step instructions.
Thanks in advance for the help.
What Rom is currently on you phone? Which Bootloaders do you have installed?
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro
Rhiannon224 said:
What Rom is currently on you phone? Which Bootloaders do you have installed?
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro
Click to expand...
Click to collapse
Here is the info:
Firmware: 2.3.3
Baseband: I897UCKF1
Kernel: 2.6.35.7-I897UCKF1-CL273832
Build: GIGERBREAD.UCKF1
^ From the looks of what u posted, it looks like u have the leaked i897uckf1 currently on ur phone. If that is the case, then u could Odin the Cognition Beta 2 Kernel and then flash the latest Cog Rom (having already copied it to ur internal sd).
Just flash the kernel through Odin then use button combo (volume +/- and power...release after u see the at&t screen) to get into CWM 4.0.0.5 and flash Cog 5 v 1.00 from there.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Are you plugging into a usb port in the back of your pc? Also, there are several methods for flashing back to stock now, once you upgrade to GB bootloaders you don’t ever want to use the Odin with the button fix because it will only flash the secondary bootloader and the primary bootloader will remain GB and the result will be a hardbrick. Also, some of the newer builds came with Froyo installed and using the older 1 click Odin by DesignGears will put those devices in a bootloop. So it really is dependent on your device and your needs. I now use the method outlined in the Continuum 6.1 thread which will not touch the bootloaders and brings you safely back to 2.1 stock. I always clear user data and cache in recovery, flash back to stock using Cezar's method (not a 1 click) prior to flashing a new Rom. Most devs recommend flashing to stock first because there is less chance of corruption.
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro
http://www.youtube.com/watch?v=UOyx5JQ_8_I
MobileTechVideos video is how i flashed my first gingerbread ROM. Its easy, straight forward and he has all the links you will need under the video.
piece-a-cake
Gupone said:
Please help!!! I have searched and searched and searched the forums and have come across so many threads on how to add a custom rom to your Captivate.
To start, what I have been trying to do is add a custom rom after upgrading my phone from ver 2.2 to 2.3.3 GB. Some posts say you can just upgrade with the 2.3 on the phone, other posts say you need to take the phone back to the stock 2.1 rom. Then you find posts that say, make sure you have the stock bootloaders and kernals when you downgrade to the stock 2.1.
You can easily see how even a somewhat above novice can get confussed. To take my phone back to 2.1 I have followed posts that say use Odin 1.3. I have used odin before so no big deal. However in this case again you are getting different opionions and versions on this. Some have just the odin .exe and others have the .exe and the MD5 and .ini it the package. I am assuming that the one with just the .exe has everything built in as the size is quite big.
I have tried both ways and after I "Flash" it will not finish with the normal recovery mode and see the linux script. It will go to the ATT window and just keep rebooting over and over. I then will use my JIG and get back in download mode in order to reflash back to 2.3.3 just to get the phone to work again.
Can someone please give me a clue as to what I am doing wrong or direct me to the proper files and maybe some better step by step instructions.
Thanks in advance for the help.
Click to expand...
Click to collapse
Listen, I'm new at this and learned watchin mobiletech videos from youtube. At first I found it hard but now is pretty easy (in my opinion). The first thin I do is back up apps with titanium and paste to my laptop (for me is faster to install them back), go back to stock 2.2, master reset using dialer (no odin), root, reboot, install rom on sd card, using odin i install bootloaders (I9000), flash talon kernel (odin), flash rom (CWM) and reboot. That's how I do it. Now, I could b wrong but doing it that way, in that pattern works for me. Like I said, I'm new at this but trust me....I've done it several times and it works for me. Keep reading and then decide how you want to do it. Good luck..."HONESTLY"!!!
It all depends on where you are now and where you want to go.
Sent from my SGH-I897 using XDA App
I'm new to all of this and have done a good amount of research but seems like the information never ends and there are a few ways to load a custom rom.
Method one
BACK UP!!!
Flash to stock (FTS)
Wait for your phone to reboot and then re-enable debugging
Hook phone back up to pc and Master Clear (MC) using Odin
Load Clockwork update.zip (DOWNLOAD)
Load FireFly_X-X.zip to phone memory
Remove sim and external SD, and unplug USB
Boot into recovery and reinstall packages (You may have to reinstall packages twice to get to Clockwork recovery)
Once in Clockwork recovery (Green Text), select install zip from SDcard
Next select choose zip from sdcard
Scroll down to FireFly_X-X.zip and select the file
This will run the script and install the ROM to your phone
After this is done, select go back and then select reboot phone
This may take a while, so leave your phone and go grab a snack!
Method 2
Load ROM file onto phone
Boot into recovery
Select ROM and flash it
Reboot, wait and enjoy
Wash, rinse, repeat!
What are the differences? Which one is better?
Seems like the first video is very simple and straight forward?
Am I missing something here? I'm already rooted and used titanium backup.
I'm on 2.2 Froyo and wanting to flash to Firefly 3.0
Thanks!
hi everyone, im a newbie and im having a little trouble understanding and fixing my phone.
so ill start at the beginning, i bought a note 3 from at&t N900A and then moved out of the US (after contract expired and i sim unlocked with the code they gave me.)
I could not connect to at&t servers from outside US to OTA update. (i dont remember if i was mj5 or mi9)
So i learned about rooting while trying to update and decided to use kingo root app and got root access
then i installed safestrap 3.71 for a custom recovery, then i backed up my stock rom and made a new rom slot. Then i resorted my stock rom to rom slot 1.
this is my mistake: i flashed the knoxraid rom from here
http://galaxynote3root.com/att-galaxy-note-3-roms/knoxraid-kitkat-rom-for-att-galaxy-note-3/
however i forgot to do the data/factory wipe. To make matters worse i realized this and pulled the battery out after about 20 seconds (the download bar was about 10% complete)
when i put the battery back in the phone went straight to recovery (recovery and download mode were the only ones working)
i started panicking as this was my first time rooting/installing roms and tried to find a solution
i found one and used this:
http://www.droidviews.com/how-to-unbrick-att-galaxy-note-3-sm-n900a/
i flashed all the files correctly and odin got to about 95% and the said FAIL
i panicked again when i turned my phone on and it went to an error screen saying firmware upgrade incountered an issue etc.
before i harm my device further i would like to know what to do (i can still get to download mode)
odin mode say it is A2 so i belive that is mj5
i want to know: should i reflash stock mj5, and if so please provide link
should i do this: http://forum.xda-developers.com/showpost.php?p=48243768&postcount=1
should i use the N900AUCUBMI9_OneClickBin.exe
or should i flash nc2 files found here: http://forum.xda-developers.com/note-3-att/general/n900aucucnc2-odin-files-t2838117
will the nc2 kitkat brick my device? keep in mind it is running A2 which im sure is mj5
Thank you everyone in advance
NC2 won't brick your device, but it'll upgrade your bootloader to A3 which will prevent you from ever downgrading back to MJ5 (not that you'd want to anyway). I'd just go with NC2 since it's rootable with TowelRoot anyway. Also, in your case I'd recommend using the 4-file method rather than the 1-file method since it's an upgrade from 4.3 rather than just a restore to stock 4.4.2.
Sent from my AT&T Galaxy Note 3 using Tapatalk®
andygev35 said:
NC2 won't brick your device, but it'll upgrade your bootloader to A3 which will prevent you from ever downgrading back to MJ5 (not that you'd want to anyway). I'd just go with NC2 since it's rootable with TowelRoot anyway. Also, in your case I'd recommend using the 4-file method rather than the 1-file method since it's an upgrade from 4.3 rather than just a restore to stock 4.4.2.
Sent from my AT&T Galaxy Note 3 using Tapatalk®
Click to expand...
Click to collapse
thank you
infinitephase said:
thank you
Click to expand...
Click to collapse
You might want to consider adding the Pit file too to repartition your phone just in case anything got messed up in the failed odin flash that would definitely clean everything up. It might be overkill but I don't think it would hurt to do since you're doing a factory reset with the 4-file install anyway
So I had to reflash my custom rom (UrDroid Deodex) in an attempt to get ISIS / Softcard to work. As I was looking at the roms, I almost downloaded the NC2 version of FireKat before I read not to install it unless coming from Stock NC2. Anyway -- could I flash a NC2 rom?
I used to love UrDroid since it was perfect for me, but ever since I reflashed it, the Home Button isn't working (it works for screenshots, task manager, SVoice, etc. but I can't single click it and expect to be taken to my homepage). I'm interested in trying out FireKat. My OS firmware is 4.4.2
Thanks!
You need to Odin stock NC2, you should be able to find it in the all in one thread. Then root, install ss and then you should be able to flash FK. On FK myself and it's definitely great.
roswelljeeper said:
You need to Odin stock NC2, you should be able to find it in the all in one thread. Then root, install ss and then you should be able to flash FK. On FK myself and it's definitely great.
Click to expand...
Click to collapse
Ahh thanks ... it's been a while since I've done this.
I was looking at the Odin stock NC2 and among the various files to download, I saw this one:
All-in-One N900AUCUCNC2_N900AATTCNC2_N900AUCUCNC2_HOME.tar.md 5
(link to thread: http://forum.xda-developers.com/showthread.php?t=2703006)
I understand the AP, BL, CP, CSC (these are the important ones for Odin), but what's the all in one supposed to be about?
The all in one is to flash with just one file instead of the four.
Hey guys so recently I had rooted my i537 S4 active and have been researching and modifying here and there until i decided to get a custom ROM. I found WickedROM via this post http://forum.xda-developers.com/show....php?t=2491762 and considering it had worked on this person's i537 I decided to flash the ROM. After flashing I had become stuck in a bootloop and I can't get to anything besides DOWNLOAD MODE. Due to this problem I decided to run a stock firmware via Odin with this one_click http://rootzwiki.com/topic/44121-sgh...axy-s4-active/ ... this filled up until the bar was about 90% and then all of a sudden fails at <ID:0/003> system.img.ext4. I've tried other firmwares with no luck and have resorted to posting about this problem. please help and guide me in the right direction, my phone's been bricked for 3 days now. Trying to boot into recovery gives me the "there's been a problem with your firmware update, please run in Kies recovery" and Kies doesn't recognize my phone.
nickeon1 said:
After flashing I had become stuck in a bootloop and I can't get to anything besides DOWNLOAD MODE.
Click to expand...
Click to collapse
You forgot to flash the masterpatch which makes roms designed for the AT&T S4 (not active) work for our phone. If I understand correctly it needs to be flashed immediately after the rom is installed (i.e. still in SafeStrap, before you attempt to boot up).
nickeon1 said:
Due to this problem I decided to run a stock firmware via Odin with this one_click http://rootzwiki.com/topic/44121-sgh...axy-s4-active/ ... this filled up until the bar was about 90% and then all of a sudden fails at <ID:0/003> system.img.ext4 and Kies doesn't recognize my phone.
Click to expand...
Click to collapse
That link is for MF1, an outdated firmware. Here is a collection of stock i537 firmwares. I can personally confirm the NH3 file is usable since I used it to upgrade to the most recent firmware without losing root.
This thread will provide you instructions on how to use Odin to flash any stock firmware. I can only add I recommend using Odin v3.07, as I've used it with the most success and fewest issues. Also use NH3 firmware or at the very least NE3, because anything else is outdated, assuming you were on stock KitKat originally, and you will encounter similar issues if trying to downgrade to jellybean.
Also flashing with Odin deletes all your saved files/user info etc. on your phone. From the sound of it, fixing your phone is going to involve inevitably wiping it one way or the other, so I hope you have a backup saved somewhere other than your phone's internal memory.
nickeon1 said:
Hey guys so recently I had rooted my i537 S4 active and have been researching and modifying here and there until i decided to get a custom ROM. I found WickedROM via this post http://forum.xda-developers.com/show....php?t=2491762 and considering it had worked on this person's i537 I decided to flash the ROM. After flashing I had become stuck in a bootloop and I can't get to anything besides DOWNLOAD MODE. Due to this problem I decided to run a stock firmware via Odin with this one_click http://rootzwiki.com/topic/44121-sgh...axy-s4-active/ ... this filled up until the bar was about 90% and then all of a sudden fails at <ID:0/003> system.img.ext4. I've tried other firmwares with no luck and have resorted to posting about this problem. please help and guide me in the right direction, my phone's been bricked for 3 days now. Trying to boot into recovery gives me the "there's been a problem with your firmware update, please run in Kies recovery" and Kies doesn't recognize my phone.
Click to expand...
Click to collapse
When you flash back to stock, you can only flash a version that is equal to or greater than the version you were already on. So if you were originally on 4.4.2 you can only flash a 4.4.2 stock ROM, any other ROM will fail to flash.
thisisapoorusernamechoice said:
You forgot to flash the masterpatch which makes roms designed for the AT&T S4 (not active) work for our phone. If I understand correctly it needs to be flashed immediately after the rom is installed (i.e. still in SafeStrap, before you attempt to boot up).
That link is for MF1, an outdated firmware. Here is a collection of stock i537 firmwares. I can personally confirm the NH3 file is usable since I used it to upgrade to the most recent firmware without losing root.
This thread will provide you instructions on how to use Odin to flash any stock firmware. I can only add I recommend using Odin v3.07, as I've used it with the most success and fewest issues. Also use NH3 firmware or at the very least NE3, because anything else is outdated, assuming you were on stock KitKat originally, and you will encounter similar issues if trying to downgrade to jellybean.
Also flashing with Odin deletes all your saved files/user info etc. on your phone. From the sound of it, fixing your phone is going to involve inevitably wiping it one way or the other, so I hope you have a backup saved somewhere other than your phone's internal memory.
Click to expand...
Click to collapse
Thanks very much for this! I flashed an NE3 firmware and was able to get my phone in working condition. So if I wanted to flash a rom on my phone I would have to masterpatch AFTER the rom flash via Safestrap?
nickeon1 said:
Thanks very much for this! I flashed an NE3 firmware and was able to get my phone in working condition. So if I wanted to flash a rom on my phone I would have to masterpatch AFTER the rom flash via Safestrap?
Click to expand...
Click to collapse
Yes, but make sure the phone doesn't reboot in between flashing the ROM and flashing the Masterpatch.
I've been searching and searching for either file and I've got nothing but dead links. The one file I did find is bad and failed to write in Odin. It's been a long time since I worked on this phone and it's currently on 4.4.2, NC2 and it's not able to receive calls after unlocking and switching carriers...so my one thought is to flash the modem file. The phone is rooted but Safestrap is not installed. Going from NC2 up to what's currently available seems very daunting and there are many conflicting instructions on how to go from one version to another.
So, does anyone have a good link to either of the mentioned files? I've been looking for Odin files but I'd install Safestrap (if I can find the right one) and flash in recovery if that is the way to do it.
Or is it possible to update 4.4.2 to 5.0? What are the best instructions? I've spent four hours researching and it's just not obvious what I can or should do. I just want the phone to receive calls.
Safestrap is installed but won't work. Installed reinstalled busybox, etc. No love.
Found this, finally. https://mega.co.nz/#F!wg5wRQrQ!vR7a6pze9dgSWjbaRSyhWA. I flashed the modem but there is still the same problem. Did unlocking break the phone? I'm going to go ahead and download the whole stock ROM and try that next.