Related
Help! I successfully rooted my Kindle Fire HD 7" following your tutorial "[ROOT][HOW TO] Root the Kindle Fire HD and 2 with Windows - Noob (Simple) Version", and then installed Google Plays etc. following "[ROOT][HOW TO] Install Google Play Store Noob (Simple) Version". I then got to the "[How to] Install Go Launcher EX and HD Noob (Simple) Version" tutorial, and everything went down hill from here.
After following the instructions of tutorial 3, and error message popped on my screen saying that "October has Stopped" and my device froze. I held down the power button, but my device wouldn't boot up - instead it went to a screen with a "Red Warning Triangle". I tried everything from this screen to reboot/reboot my device, all to no avail. Eventually the battery died.
I was able to my Kindle Charged again using the wall charger. However, when plugging into my computer via USB, it doesn't appear on my list of devices. Thus, tools such as KF First Aide are of no help; they cant't communicate with my device, and get stuck on the "<waiting for device>" message.
Any advice?
Can I fix this? How Is my Kindle Fird HD 7" dead forever?
dim_opoulos said:
Help! I successfully rooted my Kindle Fire HD 7" following your tutorial "[ROOT][HOW TO] Root the Kindle Fire HD and 2 with Windows - Noob (Simple) Version", and then installed Google Plays etc. following "[ROOT][HOW TO] Install Google Play Store Noob (Simple) Version". I then got to the "[How to] Install Go Launcher EX and HD Noob (Simple) Version" tutorial, and everything went down hill from here.
After following the instructions of tutorial 3, and error message popped on my screen saying that "October has Stopped" and my device froze. I held down the power button, but my device wouldn't boot up - instead it went to a screen with a "Red Warning Triangle". I tried everything from this screen to reboot/reboot my device, all to no avail. Eventually the battery died.
I was able to my Kindle Charged again using the wall charger. However, when plugging into my computer via USB, it doesn't appear on my list of devices. Thus, tools such as KF First Aide are of no help; they cant't communicate with my device, and get stuck on the "<waiting for device>" message.
Any advice?
Can I fix this? How Is my Kindle Fird HD 7" dead forever?
Click to expand...
Click to collapse
Yes you can fix it,In Fact, You need to have done a lot worse than that to completely fry your kindle, Don't worry, But you will need a factory cable now, Do you have one?
If you don't you can either
A) Order one from SkOrPn
B)Make one yourself, It's easy if you know how to solder
Once you acquire i'll tell you how to completely restore your kindle!
Yes he is right. You can order a factory cable from prokennexusa by PM.
Sent from my KFTT using xda app-developers app
AmrBanawan said:
Yes you can fix it,In Fact, You need to have done a lot worse than that to completely fry your kindle, Don't worry, But you will need a factory cable now, Do you have one?
If you don't you can either
A) Order one from SkOrPn
B)Make one yourself, It's easy if you know how to solder
Once you acquire i'll tell you how to completely restore your kindle!
Click to expand...
Click to collapse
Thanks. I am ordering a factory cable asap. Once it arrives, however, what do I so then?
If u got any Samsung chargers laying around its very easy to make one without solder
Sent from my KFTT using xda premium
dim_opoulos said:
Thanks. I am ordering a factory cable asap. Once it arrives, however, what do I so then?
Click to expand...
Click to collapse
The simplest tool that can restore your kindle would be
KFHD System.img Restore Tool KFHD SRT
All you need to do is download this tool
KFHD_SRT_v1.2.3- 7.2.3
This is a large download, System images are ~600Mb
Originial Thread
http://forum.xda-developers.com/showthread.php?t=1951254
Open SR Tool.bat
choose option 1
Or option 2 if you would like to have Go launcher or Apex launcher installed along with it, And google play store!
The tool will send the system image to your kindle, This will take about 7 minutes
Next, you should choose option 3 to wipe cache and userdata, This is recommended but not required, You will lose any files you transferred to your kindle, You don't need to do this if you want to keep your files!
If you need help just ask
:good::good:Good Luck:good::good:
UPDATE
I wanted to update everyone on my situation. I followed the threads advice - and it worked!
Specifically:
1. I ordered a factory cable from SkOrPn - got it in 3 days after placing order (shibby!).
2. I charged my device by plugging it into wall charger.
3. I installed the Kindle Fire ADB drivers on my compter - directions and links can be found on the thread [ROOT][HOW TO] Root the Kindle Fire HD and 2 with Windows - Noob (Simple) Version
4. I installed the toolbox KFHD_SRT_v1.2.3- 7.2.3 - from the thread KFHD System.img Restore Tool KFHD SRT
5. I plugged my device into PC USB port using the factory cable - it immediately went into fastboot.
6. I used KFHD_SRT_v1.2.3- 7.2.3 from my pc (SR Tool.bat), followed the instructions, and presto.
dim_opoulos said:
I wanted to update everyone on my situation. I followed the threads advice - and it worked!
Specifically:
1. I ordered a factory cable from SkOrPn - got it in 3 days after placing order (shibby!).
2. I charged my device by plugging it into wall charger.
3. I installed the Kindle Fire ADB drivers on my compter - directions and links can be found on the thread [ROOT][HOW TO] Root the Kindle Fire HD and 2 with Windows - Noob (Simple) Version
4. I installed the toolbox KFHD_SRT_v1.2.3- 7.2.3 - from the thread KFHD System.img Restore Tool KFHD SRT
5. I plugged my device into PC USB port using the factory cable - it immediately went into fastboot.
6. I used KFHD_SRT_v1.2.3- 7.2.3 from my pc (SR Tool.bat), followed the instructions, and presto.
Click to expand...
Click to collapse
How long did it take your kindle to charge? When I plug mine in the wall charger it only turns on for like 5 seconds and that's about it? Also did you use the factory cable to charge or the usb cable that came with the Kindle?
bricked .. red screen
I was able to root my KFHD7 with Root_with_Restore and then Qemu .. rooting seemed to work fine.
I then tried to use Fire Flash app to load Hashcode's freedom boot image and TWRP recovery image.. clicked the flash button, it rebooted to a red screen.
I made myself a fastboot cable, when I plug it in, I see the Fastboot logo on the kindle, but my PC never detects the device.
Not sure where to go from here.
I've downloaded and tried KF2_SRT tool and no go. Also downloaded and tried KFFirstAide .. same deal.
All tools stay on <waiting for device>
remove factory cable after it is in fastboot
compmd said:
I was able to root my KFHD7 with Root_with_Restore and then Qemu .. rooting seemed to work fine.
I then tried to use Fire Flash app to load Hashcode's freedom boot image and TWRP recovery image.. clicked the flash button, it rebooted to a red screen.
I made myself a fastboot cable, when I plug it in, I see the Fastboot logo on the kindle, but my PC never detects the device.
Not sure where to go from here.
I've downloaded and tried KF2_SRT tool and no go. Also downloaded and tried KFFirstAide .. same deal.
All tools stay on <waiting for device>
Click to expand...
Click to collapse
remove factory cable after it is in fastboot mode then plug normal usb cable in it then into pc.
My Kindle Fire is basically like this one mentioned above and I'm in fastboot with the factory cable, but i'm stuck with , <waiting for device> on the tool. It seems as though my drivers can't be installed. Any fix to this.
wj3pic said:
...It seems as though my drivers can't be installed...
Click to expand...
Click to collapse
Can you elaborate on this?
soupmagnet said:
Can you elaborate on this?
Click to expand...
Click to collapse
So, basically.
1) I rooted
2) got google play
3) tried to get twrp with fire flash, and this is where i screwed up
Insted of using hashcode's twrp img i used the actualy twrp (blaze) img. so im in this constant reboot loop thing.
So i got a factory cable and I am in flashboot. I got KFHD recovery tool 1.3.5 and when i click option 1, it says <waiting for device>.
I think this is due to the fact that my drivers are not installed correctly, so i tried to reinstall drivers but it just doesnt seem to be working. My thoughts are, If i can just get my computer to recognize the device we might be ok. but i cant seem to make it do that.
wj3pic said:
So, basically.
1) I rooted
2) got google play
3) tried to get twrp with fire flash, and this is where i screwed up
Insted of using hashcode's twrp img i used the actualy twrp (blaze) img. so im in this constant reboot loop thing.
So i got a factory cable and I am in flashboot. I got KFHD recovery tool 1.3.5 and when i click option 1, it says .
I think this is due to the fact that my drivers are not installed correctly, so i tried to reinstall drivers but it just doesnt seem to be working. My thoughts are, If i can just get my computer to recognize the device we might be ok. but i cant seem to make it do that.
Click to expand...
Click to collapse
Watch this video here to learn how to set up your drivers http://m.youtube.com/watch?v=oaNM-lt_aHw&desktop_uri=/watch?v=oaNM-lt_aHw
You're bootlooping and need to use Kindle Fire First Aide to get your KFHD back to normal. http://forum.xda-developers.com/showthread.php?t=2096888
I used KFFA to get back to 7.2.3 bootloader and used Hashcode's 7.2.3 bootimg and the 2.6.1 TWRP file he lists. This worked great using Fire flash.
Sent from my Amazon Kindle Fire HD using xda app-developers app
KFHD7 turns off after 5 seconds
So I've basically followed all steps here and in numerous other threads, but one problem still persists: the Kindle Fire HD 7 turns off after 5 seconds. If I press the power button, nothing happens. If I plug it into a charger, it'll turn on and display the "Kindle Fire" logo on the screen then turn off after 5 seconds. If I plug it into a USB port, it'll turn on and display the "Kindle Fire" logo on the screen then turn off after 5 seconds. If I plug in the factory cable, it'll turn on and display the "Kindle Fire" logo, then display the "Fastboot Kindle Fire" logo then turn off after 5 seconds. I've left the unit on the charger for hours on end, then attempt to turn it on using the power button or plugging in a normal or factory USB cable and it'll do the same thing, turn off after 5 seconds.
OK you may have a 50/50 shot if its doing this because of a bad boot loader, but it could make things worse and end up in a hard brick if it shuts off mid flash, but if it happened to be something wrong with the battery then you would risk this for nothing, but I'm more inclined to think its the bootloader since it doesn't warn u of a low battery. If the fastboot device needs its drivers still, try installing the ones in my signature in that small time frame. If u can manage that, get a copy of the boot loader for your device and check the md5sum of the file( very important) and make sure it matches. Once you have that setup, you need to flash the boot loader onto the device, so I would suggest putting the boot loader in the same folder as fastboot.exe and running "fastboot -i 0x1949 flash bootloader bootloaderfile.bin" and let it say waiting for device, then plug you fastboot cable in and see if it will successfully flash within 5 seconds. If things go south it will hard brick though from an incomplete flash so just warning you ahead of time its up to you.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
I screwed up installing CM10.1 forgot to put rom onto device and ended up in boot loop.
I got a fastboot cable but the kindle shows as Tate PVT and the update driver box is greyed out. Cant get fastboot or adb to recognise the device.
Is there anyway to recover from this
Thanks
dean
You have TWRP installed, right? Does your Kindle Fire logo turn blue while booting?
soupmagnet said:
You have TWRP installed, right? Does your Kindle Fire logo turn blue while booting?
Click to expand...
Click to collapse
i might be in the same boat...my kindle fire logo turns blue and gives me a msg at the bottom to press power button for boot menu
when i do i get normal boot,recover,and reset boot mode...when i click on one it just says booting and power button stays organish red for ever
Maybe you don't have your drivers properly installed
sent from my rooted kindle fire hd 7
Baconrind said:
I screwed up installing CM10.1 forgot to put rom onto device and ended up in boot loop.
I got a fastboot cable but the kindle shows as Tate PVT and the update driver box is greyed out. Cant get fastboot or adb to recognise the device.
Is there anyway to recover from this
Thanks
dean
Click to expand...
Click to collapse
If you have twrp installed and the blue kindle boot screen just hit volume down and use the side load feature. But if your fastboot is giving u a problem where u can't hit update driver I would assume it would be because windows is already searching for one still? If so tell windows to skip obtaining from windows update and it finish sooner so u can try to update it manually.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Baconrind said:
I screwed up installing CM10.1 forgot to put rom onto device and ended up in boot loop.
I got a fastboot cable but the kindle shows as Tate PVT and the update driver box is greyed out. Cant get fastboot or adb to recognise the device.
Is there anyway to recover from this
Thanks
dean
Click to expand...
Click to collapse
Hi Baconrind. Screwing one’s device is a good opportunity to learn new things. At least this is what happened to me and I’m glad I did. A couple of months ago I bought a new KFHD7. I spend "wonderful :laugh:" weeks as the happy owner of a KFHD7 until I started to discover the shortcomings of same, so I started reading xda-developers’ stuff to try to customise the device. First I rooted it to be able to install Google Play Store. The idea was to stay as close to stock as possible. Unfortunately I lost root with the first Amazon OTA update, then I decided to install a second bootloader, TWRP, etc. To do that I followed Hashcode’s method Kindle Fire 2nd-bootloader + TWRP for the Kindle Fire HD 7 but at some point I bricked :crying: my device. I was stuck at the Kindle Fire logo. I spent hours browsing through xda-developers and discovered that the first thing to do was to get a fastboot cable. I did not have the patience to wait for it to come from China or wherever they make them, so I found a couple of posts on the xda forum here and here. I made my own even my soldering capabilities are quite limited. I shut down the KFHD7 and plugged the “fastboot” cable to the PC and then to the Kindle, a couple of seconds later I could see the fastboot logo. Once I saw the fastboot logo I unplugged it and used the regular data transfer cable instead. Before I started the unbricking process proper I downloaded and installed this tool: KFHD_SRT_v1.3.5.-7.3. I followed the onscreen indications and could reset my KFHD7 back to its original state. Good luck.
This is my 1st time asking for help since I really have never needed it. I got a kindle fire HD 7" and rooted it. I added TWRP and a 2nd bootloader. For a long time I was stuck in TWRP and every time I tried to reboot it would just go back to TWRP. This morning I tried using the Kindle fire utility and selected option one. It seemed like it worked. I then rebooted and now I am stuck on the Kindle Fire boot screen. It shows Kindle fire on the screen, goes black for a few seconds, then back to the kindle fire, then goes black again. It keeps doing this over and over again. I am not able to get back into TWRP now. I am not sure what to do at this point. I have read just about every thread out there and cannot find a similar situation to mine. Any guidence would be appreciated.
OK mistake number one, do not use kindle fire utility on a kfhd, you could easily hard brick the kindle. That was designed for first gen it's and they work a bit differently than yours. OK now that I got that out of the way, does your kindle still have the logo turn blue?
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Thanks for the quick reponse. When I installed the 2nd bootloader and TWRP I got into the bootloop. At that time when it would bootloop it would go from orange to blue twice before going back to TWRP again. After I made the mistake of using the Kindle FIre utility it now just keeps on the kindle fire start-up screen and it is always orange.
You are either going to need a fastboot cable to fix or have some luck getting a command to work... If you open the device manager, and plug your kindle in while its off, does a Tate device show up for a few seconds? If so try updating the drivers on the Tate device to the ones in my signature. From there you should be able to use a fastboot command to get the kindle to boot into fastboot. The command would be "fastboot -i 0x1949 getvar product", but if your not seeing a Tate device then this command will be useless, and I don't wanna finish explaining how to use this command until I know your PC is detecting it, assuming you don't know how to use the fastboot command by itself from a command prompt since I don't know your skill level with android stuff and windows command prompt stuff.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Thanks again for replying. I would say my experience level is low when it comes to command prompts. I get the basics though. I will check when I get home if I see if a Tate device shows up when I connect with my usb and get back to you. Even when I was in TWRP I was having difficulty seeing my device on the computer to add a custom rom to the sd card. I tried sideloading and tried mounting the sd card but nothing worked. I wish now I would have just left it in TWRP and did some more research. Live and learn I guess. I will let you know what I find out. Thanks again.
Ok. I turned off the Kindle and then attached the USB to the computer. Nothing is being recognized. I see now too that my adb interface is also gone. It appears the computer is no longer picking up anything. When I attach the Kindle to the computer it starts the bootloop again flashing the kindle fire screen over and over again. Let me know your thoughts. Thanks again.
I think your only hope is a fast boot cable, and honestly or just depends how broke it is whether it works or not
Sent from my XT907 using xda app-developers app
Thanks for the reply. So let's say I get a factory cable and I can get into fastboot mode; what are my next steps?
http://forum.xda-developers.com/showthread.php?p=33156486
Sent from my XT907 using xda app-developers app
Ok. I wanted to clarify what I did to get in the situation that I am in. I rooted my device with no issues. I then decided to install a 2nd bootloader and TWRP. After all was done my Kindle Fire HD 7" booted to TWRP. I could not get my computer to show my device so I was stuck. Every time I would reboot it would flash kindle fire in orange, then in Blue, then in Orange, the in Blue then would go back to TWRP. I then put the device with the USB attached to my computer and from TWRP I put the device into fastboot mode. I then used the KFHD SRT v1.3.5 tool and opened the SR.Tool.bat and chose option 1. After it was done I rebooted and now I am stuck on the Kindle fire screen (in orange) and it will show for a few seconds, turn off, then go back to the kindle fire screen again (in orange) and just keep repeating. I ordered a factory cable to try to get back to fastboot mode but since it did not work for me the 1st time I was wondering if anyone had any ideas for me. Thanks in advance.
Are you sure it is a factory/fastboot cable? I would either get them from skorn or proxenusa since I know they are reliable.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Hello again. I don't have the factory cable yet; I just ordered it yesterday. When I used the fastboot mode the last time I entered the mode from TWRP and was connected to my computer with a regular usb charger. When it was in fastboot mode I selected the option 1 from the tool I mentioned in my previous post. I am just wondering if the fastboot did not work with the KFHD tool I used because I did not have a factory cable connected hence why I am stuck on the Kindle fire screen. What do you think?
No, typically it is said to use a fastboot cable just to get the device into fastboot, then plug the normal cable in afterward.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
For future reference, when you get your kindle back up and running again, you need to flash a custom ROM to boot. The TWRP boot loop stems from trying to boot into stock ROM, it won't work. So just put a ROM on your kindle before you flash bootloader + twrp next time.
Sent from my MB886 using xda app-developers app
Members,
I need your help for my KINDLE fire 7 " HD stuck at bootlogo. I just came back from work and switched on my KINDLE but it booted and got stuck at 'KINDLE FIRE' boot logo. I tried every possible troubleshooting method, like giving hard reset but nothing works. It switches ON and gets stuck at the LOGO. Going by the forums I know that I need a fastboot cable which I have already ordered and expecting the delivery.
Can you plz guide me how to proceed once I have the cable with me ?
Thanks in advance for your time.
ank707 said:
Members,
I need your help for my KINDLE fire 7 " HD stuck at bootlogo. I just came back from work and switched on my KINDLE but it booted and got stuck at 'KINDLE FIRE' boot logo. I tried every possible troubleshooting method, like giving hard reset but nothing works. It switches ON and gets stuck at the LOGO. Going by the forums I know that I need a fastboot cable which I have already ordered and expecting the delivery.
Can you plz guide me how to proceed once I have the cable with me ?
Thanks in advance for your time.
Click to expand...
Click to collapse
You'll be fine once your fastboot cord arrives. Reference this topic http://forum.xda-developers.com/showthread.php?p=37169349 to return to 7.2.3 stock. And reference this video http://m.youtube.com/watch?v=oaNM-lt_aHw&desktop_uri=/watch?v=oaNM-lt_aHw to get your ADB drivers properly installed.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
LinearEquation said:
You'll be fine once your fastboot cord arrives. Reference this topic http://forum.xda-developers.com/showthread.php?p=37169349 to return to 7.2.3 stock. And reference this video http://m.youtube.com/watch?v=oaNM-lt_aHw&desktop_uri=/watch?v=oaNM-lt_aHw to get your ADB drivers properly installed.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
Click to expand...
Click to collapse
Thanks bro....as soon as I will give it a try I will let you know. Thanks again
LinearEquation said:
You'll be fine once your fastboot cord arrives. Reference this topic http://forum.xda-developers.com/showthread.php?p=37169349 to return to 7.2.3 stock. And reference this video http://m.youtube.com/watch?v=oaNM-lt_aHw&desktop_uri=/watch?v=oaNM-lt_aHw to get your ADB drivers properly installed.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
Click to expand...
Click to collapse
Hey brother....help me please. I now have the factory cable and I have gone through the page that u suggested. But there seems to be instructions without factory cable and I am getting a lot confused. Can you please suggest me how to proceed on this ?
ank707 said:
Hey brother....help me please. I now have the factory cable and I have gone through the page that u suggested. But there seems to be instructions without factory cable and I am getting a lot confused. Can you please suggest me how to proceed on this ?
Click to expand...
Click to collapse
Fastboot cord uses fastboot commands while in fastboot. This is the link to Kindle Fire FirstAid http://forum.xda-developers.com/showthread.php?t=2096888 Once you follow the steps for setup and run it, you will choose number 3 to go back to 7.2.3 When asked if you want to reboot into fastboot, choose no because you are in fastboot.
You can use the regular USB to get into fastboot mode but not now that you are in a bootloop. After running KFFA to restore to 7.2.3 you will also use it to root and remove OTA updates then install gapps or if you are going to go custom romm with 2nd bootloader and TWRP recovery, skip gapps and move on to the latter. Do NOT use KFFA to install TWRP/2nd bootloader or any ROM. Use FireFlash.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
---------- Post added at 02:15 AM ---------- Previous post was at 01:58 AM ----------
I'm heading to bed in an hour. Be 12 hours and I will be back on again. If you have questions or get confused, ask away so we can get you squared away.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
LinearEquation said:
Fastboot cord uses fastboot commands while in fastboot. This is the link to Kindle Fire FirstAid http://forum.xda-developers.com/showthread.php?t=2096888 Once you follow the steps for setup and run it, you will choose number 3 to go back to 7.2.3 When asked if you want to reboot into fastboot, choose no because you are in fastboot.
You can use the regular USB to get into fastboot mode but not now that you are in a bootloop. After running KFFA to restore to 7.2.3 you will also use it to root and remove OTA updates then install gapps or if you are going to go custom romm with 2nd bootloader and TWRP recovery, skip gapps and move on to the latter. Do NOT use KFFA to install TWRP/2nd bootloader or any ROM. Use FireFlash.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
---------- Post added at 02:15 AM ---------- Previous post was at 01:58 AM ----------
I'm heading to bed in an hour. Be 12 hours and I will be back on again. If you have questions or get confused, ask away so we can get you squared away.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
Click to expand...
Click to collapse
Yes, I did that and then reboot my Kindle. But it's same and still stuck at boot logo.
Edit: Now it doesn't even turn ON, seems like the battery has drained. Tried wall charger for all night but still dont boots up. Plugged in the fastboot cable but nothing is happening. Please help :crying::crying:
ank707 said:
Yes, I did that and then reboot my Kindle. But it's same and still stuck at boot logo.
Edit: Now it doesn't even turn ON, seems like the battery has drained. Tried wall charger for all night but still dont boots up. Plugged in the fastboot cable but nothing is happening. Please help :crying::crying:
Click to expand...
Click to collapse
So you're saying that you had a bootloop and you ran Kindle Fire FirstAide. Which numbers/options did you press? Plugging that fastboot cord in will power your Kindle Fire HD and send it into fastboot no matter the battery charge. Where did you get the fastboot cord from? A reliable source? I'm only asking because if the battery were low and the wire that connects pins 1 to 4 (think) that energize the Kindle into fastboot mode are somehow faulty, then this would stop the kindle from going into fastboot. However, if the fastboot cord is working, it would seem you have a hard brick. I will look around to see if there is a solution for this.
LinearEquation said:
So you're saying that you had a bootloop and you ran Kindle Fire FirstAide. Which numbers/options did you press? Plugging that fastboot cord in will power your Kindle Fire HD and send it into fastboot no matter the battery charge. Where did you get the fastboot cord from? A reliable source? I'm only asking because if the battery were low and the wire that connects pins 1 to 4 (think) that energize the Kindle into fastboot mode are somehow faulty, then this would stop the kindle from going into fastboot. However, if the fastboot cord is working, it would seem you have a hard brick. I will look around to see if there is a solution for this.
Click to expand...
Click to collapse
Thanks for help mate. I bought it from amazon and it seemed to be the most reliable source http://www.amazon.com/EarlyBirdSavi...ywords=kindle+factory+cable&tag=s601000020-20
I firstly reboot the bootloader couple of times like people suggested me. When that didn't help I restored it and like i gave a detail in other post that it took fair amount of time like 45 mins of reading and writing the .img files. Even the message was prompted that 'Your kindle has been restored to 7.2.3, the only thing is that all this while the display of my Kindle didn't changed and was fixed on 'Fastboot Kindle fire' logo. I was disappointed with this device from start due to that crappy kindle OS which made it way too slow and things kept freezing and crashing all the time. Since I am in colombia and used a freight service for this cable to be delivered, i ended up paying 30 USD for the cable. I don't think I will be sending it for repair , it just don't worth it the expenses for the repair and the shipping cost from Colombia and vice versa. May be will keep experimenting and looking on XDA if at some point of time hard brick issue could be fixed.
Not to ring up the past...
But, I cannot get my kindle to work with adb to save my life.
I have the adb drivers
Fastboot finds the device
Its stuck in bootloop so the only to communicate with it is though fastboot cable.
please help
eddielane71488 said:
But, I cannot get my kindle to work with adb to save my life.
I have the adb drivers
Fastboot finds the device
Its stuck in bootloop so the only to communicate with it is though fastboot cable.
please help
Click to expand...
Click to collapse
adb doesn't work with fastboot, only fastboot commands work with fastboot.
Stuck in bootloop after accidentally converting KFHD Launcher to user app on Titanium
Please Help! My KFHD IS Stuck in bootloop after I accidentally converted Kindle Launcher from system app to user app on Titanium. the kindle continues to run in the background but the image is stuck on the animated kindle fire logo. Any ideas/help would be really appreciated! Thanks
Compilasian said:
Please Help! My KFHD IS Stuck in bootloop after I accidentally converted Kindle Launcher from system app to user app on Titanium. the kindle continues to run in the background but the image is stuck on the animated kindle fire logo. Any ideas/help would be really appreciated! Thanks
Click to expand...
Click to collapse
Reflash the system img. I don't know if you can make changes to an apk via adb.
Kindle fire stuck in Bootloop > Reply to Thread
Rushead said:
Reflash the system img. I don't know if you can make changes to an apk via adb.
Click to expand...
Click to collapse
Thanks for the reply! Unfortunately, I can't turn ADB debugging on because there is no way to get access to the menu system. Is there another manner of fastbooting and of reflashing image you can possibly recommend to bypass not having access to the launcher? Again thanks in advance!
I'm not sure what is possible via fb other than adb. Try googling flash factory image & see what you find. Sorry I can't be of more help.
Compilasian said:
Thanks for the reply! Unfortunately, I can't turn ADB debugging on because there is no way to get access to the menu system. Is there another manner of fastbooting and of reflashing image you can possibly recommend to bypass not having access to the launcher? Again thanks in advance!
Click to expand...
Click to collapse
Yes,there is. The following commands will flash the boot,recovery and system images while in fastboot.
Code:
fastboot -i 0x1949 flash boot boot.img
fastboot -i 0x1949 flash recovery recovery.img
fastboot -i 0x1949 flash system system.img
Hi im having problems with my kindle fire hd 2nd gen. I rooted and installed cm12 or 13 on it and it was working well but i lost root so i flashed Supersu through twrp now my device is bootlooping on the amazon fire boot screen. I couldn't get into fastboot so bought a fastboot cable which has arrived today (2 weeks from china) now when i plug it in the device goes into fastboot mode but my windows 10 shows it in device manager as Other Devices Tate -pvt-08. I cant issue commands through ADB (adb devices just shows nothing connected) if i enter the getvar command i just get waiting for device. I've reinstalled the kindle device driver and still no joy.
I also made a complete backup of my kindle before i rooted it which i have stored safely. but i need to know how i can push them to my kindle and how to make my laptop see the kindle.
I'm struggling now and pretty lost with it all if someone could lend a hand and tell me what im doing wrong
Corduroysack said:
Hi im having problems with my kindle fire hd 2nd gen. I rooted and installed cm12 or 13 on it and it was working well but i lost root so i flashed Supersu through twrp now my device is bootlooping on the amazon fire boot screen. I couldn't get into fastboot so bought a fastboot cable which has arrived today (2 weeks from china) now when i plug it in the device goes into fastboot mode but my windows 10 shows it in device manager as Other Devices Tate -pvt-08. I cant issue commands through ADB (adb devices just shows nothing connected) if i enter the getvar command i just get waiting for device. I've reinstalled the kindle device driver and still no joy.
I also made a complete backup of my kindle before i rooted it which i have stored safely. but i need to know how i can push them to my kindle and how to make my laptop see the kindle.
I'm struggling now and pretty lost with it all if someone could lend a hand and tell me what im doing wrong
Click to expand...
Click to collapse
hi did you ever figure out the issue? i'm also in the same boat, was running with cm13, tried to flash super su using twrp got the boot loop. will go till the white and orange logo and reboots
thomas69k said:
hi did you ever figure out the issue? i'm also in the same boat, was running with cm13, tried to flash super su using twrp got the boot loop. will go till the white and orange logo and reboots
Click to expand...
Click to collapse
cant remember what i did tbh, ive just fired my kndle up first time in a while and the rom im using is Omni Rom 6.0 its old (2016) but works. i remember using adb to push backed up partition images and literally started from scratch. Not much help but it was quite some time ago
thinking of trying this rom at some point as its 2018
https://www.mediafire.com/folder/u7sb7p10ik7v0/tate
Hello, everyone!
Yesterday I tried to flash CM10 in my kindle fire (already running CM9).
I followed the Cyanogen Mod site (wiki.cyanogenmod.org/w/Install_CM_for_otter) instructions.
I downloaded Kindle fire utility 0.9.9 (from CM site), and started the process of updating TWRP. At some point of the installation, KFU rebooted my device in fastboot mode, and kept waiting an awnser from Kindle.
It was taking a bit too long, so I restarted the tablet. Now it keeps on the "Kindle Fire" screen forever, and don't respond to ADB anymore (the "adb device" command don't return anything).
I believe it is not bricked yet, because when we connect it to the PC, it does that connection sound. However, I can't reach it with ADB anymore.
Can Anyone give me an advice for this situation?
Thanks a lot !!
You got very lucky, kindle fire utility is not meant for second generation devices, usually using it results in a hard brick. The correct way to update twrp is to grab the latest version's flashable zip from the dev section for your device and flash it from inside twrp and reboot. If you no longer have the blue logo and it is a 7" device you will need a fastboot cable, if you do have a blue logo or this is a 8.9" device you won't need a fastboot cable to fix, but you still need to get it into fastboot mode to reflash some partitions back to stock to fix this unless you get a blue logo in which case you could probably just flash the recovery but from what you said I'm assuming you don't get the blue logo anymore. And only the 8.9" models tend to be detected briefly while passing the bootloader.
Sent from my Amazon Kindle Fire HD using Tapatalk
In fact, my Kindle fire is a 1st generation one! I had already used KFU to flash CM9 on it (before, it had stock OS) .
Do this fact help in any form?
And, about the cable, I will search one imediatly!!
Thanks for your reply!
O well then this is the wrong device forum on xda... If its a kf1 then I think fastboot cable will still apply to this. Not positive, kf1's aren't my specialty, while my mother has one I never did much beyond rooting and installing twrp. Flashed a Ubuntu touch preview os on it once but that's about it.
Sent from my Amazon Kindle Fire HD using Tapatalk