Hi, my K Zoom needs to go to the Samsung technical service (some rare drops on the camera sensor), but I flashed a kernel, and then the latest official Rom with odin, and now I have the triangle shown on the download mode.
How can I revert the K Zoom to get the guarantee service?
I've read the ChainFire thread but the k zoom it's not listed to be supported. Someone had used it?
Any advice?
Please,I need you!
Thanks in advance!
No one has an idea?:crying:
Just download the firmware from Sam Mobile and flash with Odin. Do not flash any kernel. It will Revert Back to Stock and you can send it for Warranty Claim.
---------- Post added at 12:49 PM ---------- Previous post was at 12:47 PM ----------
Do not flash any other file Except for Stock Firmware for your Model and it will be Okay.
Thanks!
The sequence i used:
1.- Custom Kernel Flashed
2.- Original firm from Sam Mobile and flashed with odin
3.- Now i´m not root and everything in stock
Now, when i enter in download mode this is what i see, with a previous screen with a yellow triangle, and then this:
Produc name: sm-115
Current Binary: samsung Official
System Status: Official
Ap swrev: (1)
If you´re right, the phone is stock and in guarrantee, isn´t it?
Thanks again!
(I´m traying to be really sure because i only have one try in the technical service... :angel
talpur1 said:
Just download the firmware from Sam Mobile and flash with Odin. Do not flash any kernel. It will Revert Back to Stock and you can send it for Warranty Claim.
---------- Post added at 12:49 PM ---------- Previous post was at 12:47 PM ----------
Do not flash any other file Except for Stock Firmware for your Model and it will be Okay.
Click to expand...
Click to collapse
I have made some "screenshots" from these views, to help.
Can I get now my K Zoom to the technical service in guarantee?
Could anyone (please please!) confirm or deny, according with the photos of the previous post, that the phone is now "in guarantee"?
Thanks a lot!
Good morning...
And good night from Spain... (still needing your help!)
No
You cannot send this phone to samsung in this condition.
Do NOT flash Custom Kernel flash only firmware and then have a look if its changed to No Triangle.
THANKS Talpur!
So... I flashed the original rom, the triangle is still there. What could I do? Any idea? Thanks, once again.
Try Traingle away.
Its an app for removing triangle.
That will probably solvr your problem.
---------- Post added at 02:26 PM ---------- Previous post was at 02:25 PM ----------
After running triangle away flash the rom again to be sure.
sorry, no chance yet
you can still try to sent it in
they will either send it back,
or offer to repair at your cost
else... sell it as defective on eBay
Just download the firmware from Sam Mobile and flash with Odin. Do not flash any kernel.
Related
hey guyz my note recently got screwed up power problems , so i flashed the stock rom back and unrooted my not to fix my note on the warranty from service center so after 3 days of leaving my note there the maintenance team told me " this time we will fix your phone on the warranty but next time dont root it " how the hell did they find that out and they told me also that i have flashed 87 times via oden so i wanna root back my phone and try Asylum cyanogenmode 10.1 , 4.2.1 so is there anyway to clear the flash and root history from where ever they are found ???
also they told me you can flash whatever custom rom you'd like as long as you dont root your phone
so i found out that flashing on the stock rom without rooting does not void your warranty
thanks all in advance
may be because the counter was not cleared and you had a yellow triangle at boot ?
yes. you can flash any stock rom using odin and that doesnot void the warranty
---------- Post added at 11:35 PM ---------- Previous post was at 11:34 PM ----------
you can check that in download mode... triangle away app can reset it
nokiamodeln91 said:
may be because the counter was not cleared and you had a yellow triangle at boot ?
yes. you can flash any stock rom using odin and that doesnot void the warranty
---------- Post added at 11:35 PM ---------- Previous post was at 11:34 PM ----------
you can check that in download mode... triangle away app can reset it
Click to expand...
Click to collapse
yeah the yellow triangle was not there at boot ??
then what about the Binary count in the download mode?
nokiamodeln91 said:
then what about the Binary count in the download mode?
Click to expand...
Click to collapse
how can i reset the binary count ??
and if i reset the binary and root it, will the service center know that i rooted it ??
edit : i just checked and opened download mode : custom binary download : yes ( 87 counts)
yes thats from where they came to know.
If you root, and before going to service center, just unroot and make sure the counter is 0 .. no one will come to know
nokiamodeln91 said:
yes thats from where they came to know.
If you root, and before going to service center, just unroot and make sure the counter is 0 .. no one will come to know
Click to expand...
Click to collapse
could you kindly tell me how to reset it ?
my 1st post last line
87 Flashed roms! OMG, you are a Flasheaholic... Try using Chainfire's Triangle Away app, it will reset your binary counter and delete the Triangle (if you have it, of course)
Good luck! Sorry my bad english
87 count not necessarily mean flashed roms 87 roms. Just run into a small brick and your counter will say over 50 trying to restore your phone. He he.
Hi,
I want to root my device, which i have upgraded recently to 4.1.2
the thing is, I found some information in root threads regarding build no. like XXAMA1, XXAMA2, XXAMA4 ...etc
what are the differences between them? if all of them are 4.1.2 JB?! will anyone work?
to make it easier, which thread can work to root my SG3mini device:
Android version: 4.1.2
Baseband version: I8190XXAMA3
Kernel version: 3.0.31-860525
Build number: JZ054K.I8190XXAMA3
You can just root the one you got. No need to re-flash the whole rom.
---------- Post added at 10:54 PM ---------- Previous post was at 10:39 PM ----------
Here is also a very good explanation on these PDA/PHONE/CSC codes.
tys0n said:
You can just root the one you got. No need to re-flash the whole rom.
---------- Post added at 10:54 PM ---------- Previous post was at 10:39 PM ----------
Here is also a very good explanation on these PDA/PHONE/CSC codes.
Click to expand...
Click to collapse
can you root with a 4.1.1 custom version on a 4.1.2?
TerenceTP7 said:
can you root with a 4.1.1 custom version on a 4.1.2?
Click to expand...
Click to collapse
Yes you can, but only if you make a factory reset first. Otherwise you'll have bootloops or force closed apps.
tys0n said:
Yes you can, but only if you make a factory reset first. Otherwise you'll have bootloops or force closed apps.
Click to expand...
Click to collapse
now i have a official firmware 4.1.2 ,baseband I8190XXAMA2.before this i had a rooted 4.1.1 by avicoh.but my phone didnt boot anymore,so i flashed with the official 4.1.2 and after that with PARAM.
so now i need to factory reset,but the one that i now have isnt the one that came with my phone from the store.doesnt it give any problems when i factory reset?
original from the store was 4.1.1 JB
TerenceTP7 said:
now i have a official firmware 4.1.2 ,baseband I8190XXAMA2.before this i had a rooted 4.1.1 by avicoh.but my phone didnt boot anymore,so i flashed with the official 4.1.2 and after that with PARAM.
so now i need to factory reset,but the one that i now have isnt the one that came with my phone from the store.doesnt it give any problems when i factory reset?
original from the store was 4.1.1 JB
Click to expand...
Click to collapse
No it shouldn't be any problem. Factory reset makes sure there is no leftovers from previous install. Clears cache, settings, user data.
tys0n said:
No it shouldn't be any problem. Factory reset makes sure there is no leftovers from previous install. Clears cache, settings, user data.
Click to expand...
Click to collapse
alright,i trust you on this.i did the reset my phone rebooted and now its stuck on the bootlogo(galaxys3mini gt-i8190).do i need to wait?or?
..
..
still stuck on bootlogo after 10minutes.doesnt look good.use param again?
---------- Post added at 06:04 PM ---------- Previous post was at 05:40 PM ----------
ok,that didnt work..man im getting headache of this..
i booted my phone again using PARAM.
do you know a root version for my phone?maybe a version that clear all my data too?
---------- Post added at 06:28 PM ---------- Previous post was at 06:04 PM ----------
TerenceTP7 said:
alright,i trust you on this.i did the reset my phone rebooted and now its stuck on the bootlogo(galaxys3mini gt-i8190).do i need to wait?or?
..
..
still stuck on bootlogo after 10minutes.doesnt look good.use param again?
---------- Post added at 06:04 PM ---------- Previous post was at 05:40 PM ----------
ok,that didnt work..man im getting headache of this..
i booted my phone again using PARAM.
do you know a root version for my phone?maybe a version that clear all my data too?
Click to expand...
Click to collapse
the one that you have http://forum.xda-developers.com/showthread.php?t=2178346 is this a root version?for the netherlands?can i use it on my phone?
Just flash a wipe.tar and then your firmware.
I never had to flash param.lfs to get it boot.
Once I had to pull the battery and power on again when it got stuck on boot after flash.
tys0n said:
Just flash a wipe.tar and then your firmware.
I never had to flash param.lfs to get it boot.
Once I had to pull the battery and power on again when it got stuck on boot after flash.
Click to expand...
Click to collapse
i did used it once that wipe.tar but get stuck on bootscreen.
do you need to wait long on bootscreen while flashing with wipe.tar?
and how does it work?just odin>pda,select wipe.tar>start?
TerenceTP7 said:
i did used it once that wipe.tar but get stuck on bootscreen.
do you need to wait long on bootscreen while flashing with wipe.tar?
and how does it work?just odin>pda,select wipe.tar>start?
Click to expand...
Click to collapse
Yes flash as pda. It's basicly the same as a factory reset.
If your phone reboots after, just put it in download again and flash firmware.
tys0n said:
Yes flash as pda. It's basicly the same as a factory reset.
If your phone reboots after, just put it in download again and flash firmware.
Click to expand...
Click to collapse
and what if its get stuck on bootscreen again.use PARAM?
TerenceTP7 said:
and what if its get stuck on bootscreen again.use PARAM?
Click to expand...
Click to collapse
Afaik the param.lfs is mostly just a bunch of pictures. Don't know what it does, except loads the phone with startup/downloadmode pictures.
http://forum.xda-developers.com/showthread.php?t=1750645
http://z4ziggy.wordpress.com/2010/09/18/looking-into-param-lfs-file/
tys0n said:
Afaik the param.lfs is mostly just a bunch of pictures. Don't know what it does, except loads the phone with startup/downloadmode pictures.
http://forum.xda-developers.com/showthread.php?t=1750645
http://z4ziggy.wordpress.com/2010/09/18/looking-into-param-lfs-file/
Click to expand...
Click to collapse
i dont get it.i have my 4.1.2 rooted now,but after flashing ,my phone doesnt boot.it only boots when i flash the PARAM file.i restarded my phone to check if that works and that works fine.i dont think this is a big problem,is it?
at first sight everything works fine.
WIPE doesnt work,and factory reset doesnt work either.is there a option to do this manually.i have clear master,is that the same?
tys0n said:
You can just root the one you got. No need to re-flash the whole rom.
---------- Post added at 10:54 PM ---------- Previous post was at 10:39 PM ----------
Here is also a very good explanation on these PDA/PHONE/CSC codes.
Click to expand...
Click to collapse
thank you tys0n for your replies! i kept my CSC, didn't change it.. since i'm already having 4.1.2 (last firmware for s3 mini till now)
and followed this way to root my device:
http://forum.xda-developers.com/showthread.php?t=2150979
and it worked
the only thing is, this way increased the flash counter! i dont know how is this bad, but i guess just if i want to give it to someone to check it, they will know, right?!
BUT I found other rooted ROM that they will reset binary count after flash to "none"! and will show firmware as "official" instead of "custom"..
anyway, good to learn and i'm saying all that just in case any noob like me saw this thread in the future maybe they can find one useful info or two
sorry TerenceTP7 that i can't help you.. still new to those things..
and thank you again tys0n
Sv: [Q] for 4.1.2 root, what is the difference between build no.?
Search triangle away here on xda. It's an app that will reset your binary count to zero
Sent through time and space from my s3mini.
Hi! A disaster happened. Flashed TWPR from LG G2. The phone is not included. Download mode does not respond. There is an opportunity to revive him?
[email protected] said:
Hi! A disaster happened. Flashed TWPR from LG G2. The phone is not included. Download mode does not respond. There is an opportunity to revive him?
Click to expand...
Click to collapse
my first question is....why would u try flashing another devices recovery? are on you KK or JB? were you rooted when this happened? have you tried the RUU( or whatever it is called on LG) to do a stock factory reimage?
---------- Post added at 10:07 AM ---------- Previous post was at 10:04 AM ----------
[email protected] said:
Hi! A disaster happened. Flashed TWPR from LG G2. The phone is not included. Download mode does not respond. There is an opportunity to revive him?
Click to expand...
Click to collapse
try this:
http://forum.xda-developers.com/showthread.php?t=2644083
not guaranteed but, it's worth a shot. USE THE SPRINT LS995 portion right below the initial instructions. good luck....
dgomez720 said:
my first question is....why would u try flashing another devices recovery? are on you KK or JB? were you rooted when this happened? have you tried the RUU( or whatever it is called on LG) to do a stock factory reimage?
---------- Post added at 10:07 AM ---------- Previous post was at 10:04 AM ----------
try this:
http://forum.xda-developers.com/showthread.php?t=2644083
not guaranteed but, it's worth a shot. USE THE SPRINT LS995 portion right below the initial instructions. good luck....
Click to expand...
Click to collapse
It's not so easy. He does not connect in boot mode. Phone - a corpse.
[email protected] said:
It's not so easy. He does not connect in boot mode. Phone - a corpse.
Click to expand...
Click to collapse
that blows.......
I just got notified on my phone that 98.2.16.en.MX is available to install. Its an upgrade from the current Mexican ROM I'm running. Does anyone know anything about it? Is it 4.4?!
Odds are its just the heartbleed bugfix.
ATT's version was 98.5.38.MB866.ATT.en.US
I'll check it out. I've upgraded phones now so I don't care if I lose root. Give me about a couple hours and I'll report back.
Sent from my LG-D850 using XDA Free mobile app
I reinstalled stock Nextel aka Mexican retail and no update a available.
Here's the screenshot of the about screen.
Sent from my LG-D850 using XDA Free mobile app
---------- Post added at 08:17 PM ---------- Previous post was at 08:15 PM ----------
Sent from my LG-D850 using XDA Free mobile app
So I decided to upgrade the phone, not realizing it wouldn't work with my phone already being rooted. My phone failed to install the update, something about signature invalid. It then proceeded to continually boot up normally, wait 15 seconds, then reboot and try to install the update again. I couldn't get it to start up normally.
I finally was able to boot up into CWM recovery and wipe the /cache and dalvik partitions, which seemed to delete that update .zip file, wherever it was.
Anyways, i'm curious what this update is, but I don't want to brick my phone trying to update it. Is there a way to install this update if my phone's rooted? What about CWM's Signature Check feature, can I enable that, then install the .zip file (assuming I can find it) from within CWM?
Thanks
Farfolomew said:
So I decided to upgrade the phone, not realizing it wouldn't work with my phone already being rooted. My phone failed to install the update, something about signature invalid. It then proceeded to continually boot up normally, wait 15 seconds, then reboot and try to install the update again. I couldn't get it to start up normally.
I finally was able to boot up into CWM recovery and wipe the /cache and dalvik partitions, which seemed to delete that update .zip file, wherever it was.
Anyways, i'm curious what this update is, but I don't want to brick my phone trying to update it. Is there a way to install this update if my phone's rooted? What about CWM's Signature Check feature, can I enable that, then install the .zip file (assuming I can find it) from within CWM?
Thanks
Click to expand...
Click to collapse
If your boot loader is unlocked, no issues at all... just clean flash stock via fastboot (including stock recovery) and try updating....
Well, I had my atrix hd without no use since I switched to the LG G2 so I gave it a shot.
I restored it to stock through fastboot, the updated appeared and its 18mb only. Downloaded installed and still 4.1.2
---------- Post added at 04:11 PM ---------- Previous post was at 03:59 PM ----------
Another thing it didnt allowed me to return to the previous version trhpough RSD Lite, so be careful when updating.
---------- Post added at 04:12 PM ---------- Previous post was at 04:11 PM ----------
Lol, now im stuck in fastboot since it failed to flash.
---------- Post added at 04:22 PM ---------- Previous post was at 04:12 PM ----------
Well, I restored the phone manually through fastboot skipping some files and just flashing the important (system, boot, etc) and its working again.
If you want me to do more testings just le me know.
neondunker said:
Well, I had my atrix hd without no use since I switched to the LG G2 so I gave it a shot.
I restored it to stock through fastboot, the updated appeared and its 18mb only. Downloaded installed and still 4.1.2
---------- Post added at 04:11 PM ---------- Previous post was at 03:59 PM ----------
Another thing it didnt allowed me to return to the previous version trhpough RSD Lite, so be careful when updating.
---------- Post added at 04:12 PM ---------- Previous post was at 04:11 PM ----------
Lol, now im stuck in fastboot since it failed to flash.
---------- Post added at 04:22 PM ---------- Previous post was at 04:12 PM ----------
Well, I restored the phone manually through fastboot skipping some files and just flashing the important (system, boot, etc) and its working again.
If you want me to do more testings just le me know.
Click to expand...
Click to collapse
It would be great if you can give us the changelog.. it is easy to find it... it will be on the update dialogbox
This Is the only url that appears when informs me about the update
https://motorola-global-es-latam.custhelp.com/app/answers/detail/a_id/103605
It only updates Prip and other few bugs. Falso a se of the update dialog box
Heres the ota file, in case it helps.
neondunker said:
Heres the ota file, in case it helps.
Click to expand...
Click to collapse
Can you provide a link to the original 4.12 mexican rom?
Hello guys,
last week my father's phone did a OS update and now it behaves crazy.
I mean, very very slow to boot, sometimes stuck on logo screen and I need to force reboot.
After booting, all apps the first time are loaded very slowly, and if they have been already opened once they are opened decently fast.
I already did Wipe cache partition and hard reset.
I kindly ask how can I reinstall the original OS using the computer and usb cable.
I did the same last year with another phone so so think I can do it if I have a short guide.
Thanks for help
Bye
Flash latest stock rom using odin in download mode
---------- Post added at 09:28 AM ---------- Previous post was at 09:23 AM ----------
https://www.sammobile.com/samsung/g...e/SM-A605G/INS/download/A605GDXU7CTF2/348550/
---------- Post added at 09:29 AM ---------- Previous post was at 09:28 AM ----------
Don't forget to download your phones country origin only latest rom
Thank you very much.
I need Italian version of the firmware, or at least European version. Those version are not present in the link you provided. Where can I find them ?
Thanks in advance
https://www.sammobile.com/samsung/g...SM-A605FN/TIM/download/A605FNXXS5CTG3/357654/