Database Develop

[DER KERNEL] NS+4G Trinity (E)UV and OC ICS + JB roms

It's DoW if you owned a Vibrant before, Trinity is the name in its passport though.
-------------------------------------------------------------------------------------------
Files and source:
www . Der Kernel . com
-------------------------------------------------------------------------------------------
​
ICS:
Voodoo Sound V10 (Thanks supercurio)
Trinity Spice (based on voodoo color V1 by supercurio)
BLN (Backlight notification) (Big Thanks Neldar)
Backlight dimmer by Ezekeel
Based on Samsung git source.
Safeboot to lower clock, higher need a tool like setcpu or no-frills CPU control
New Trinity bootanimation by @rascarlo
TUN module (Tunneling/VPN support)
CIFS module (Samba support)
EXT4 tweaks
Most lean build achievable.
Not a rebooter.
JB: WIP
For CM, to use this kernel flash the CM Black Screen Fix (Thanks JackpotClavin and lurtis)
Thanks to @RyanMacG for euroskank hosting​
When "Just Flash It" didn't work:
Flash rom.
Flash kernel.
Power off.
Pull battery for 2 minutes.
Put battery back
Now boot phone.
---------------------------------------------------------------------------------------
GPS woes? Try this .apk, worked wonders on GB.
Endursa shared this GL fixing link. Follow it, see 65fps on Quadrant planet like it was meant to be.
T for Trinity
UV for undervolt (you would want to uninstall setcpu like apps and just run it)
EUV represents a 880MHz top speed power savings kernel, snappy still? You Bet'cha!
144 for 1.44GHz (I will rethink this when the 10GHz phones hit the market)
-Any means it uses Koush's anykernel scripting to install trinity using the original ramdisk, making it possible to use it on m(any) roms w/o needing a special version.
(X)A new kernel just born by my slacker hands, feel free to use it, we think it's good even if it was eXperimental just moments ago. (X) comes off when we feel it's a daily driver.

maybe i need this later

Hmmm, interesting :3
I'll test it right now
edit: Freeze after playing games or using the 3d drawer

dario3040 said:
Hmmm, interesting :3
I'll test it right now
edit: Freeze after playing games or using the 3d drawer
Click to expand...
Click to collapse
Launcher Pro? Or do you mean adw's 4D?
Sent from my Nexus S

morfic said:
Launcher Pro? Or do you mean adw's 4D?
Sent from my Nexus S
Click to expand...
Click to collapse
Google's stock android 2.2/2.3 launcher.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Yea I will say this is the fastest kernel I have ever used, scored averaging 3700, best being almost 4000...Solid work morfic.

adewey234 said:
Yea I will say this is the fastest kernel I have ever used, scored averaging 3700, best being almost 4000...Solid work morfic.
Click to expand...
Click to collapse
Thanks for some positive feedback.
This is the longest tested of all kernels I built.
Simms22 is not much of a tester, his phone runs about any crazy oc and uv I throw at it, so I added time to testing it
Unfortunately no oc kernel will ever run stable on all phones, if they did, samsung would charge us for that.
Sent from my Nexus S

morfic said:
Thanks for some positive feedback.
This is the longest tested of all kernels I built.
Simms22 is not much of a tester, his phone runs about any crazy oc and uv I throw at it, so I added time to testing it
Unfortunately no oc kernel will ever run stable on all phones, if they did, samsung would charge us for that.
Sent from my Nexus S
Click to expand...
Click to collapse
Unfortunately not stable on my device. Ran a couple of quadrants (4015) but froze during smartbench.

morfic said:
Thanks for some positive feedback.
This is the longest tested of all kernels I built.
Simms22 is not much of a tester, his phone runs about any crazy oc and uv I throw at it, so I added time to testing it
Unfortunately no oc kernel will ever run stable on all phones, if they did, samsung would charge us for that.
Sent from my Nexus S
Click to expand...
Click to collapse
Naw it runs 100% on full OC 1440. I only have issues with radio occassionally, but thats because i cant make up my mind which is better, KB1 or KB3. But yea, mos def a daily driver. Ive drained my battery in 1/3 of the time i usually do, playing with my phone so much. Much appreciated sir, if you need more experienced feedback, let me know, I've done some work with android, just dont have the time as of late, but logcats etc are easy and not that taxing on my time

morfic said:
Thanks for some positive feedback.
This is the longest tested of all kernels I built.
Simms22 is not much of a tester, his phone runs about any crazy oc and uv I throw at it, so I added time to testing it
Unfortunately no oc kernel will ever run stable on all phones, if they did, samsung would charge us for that.
Click to expand...
Click to collapse
except for that damned 1.7ghz kernel. one of these days..
jlevy73 said:
Unfortunately not stable on my device. Ran a couple of quadrants (4015) but froze during smartbench.
Click to expand...
Click to collapse
the phone commited murphacide

adewey234 said:
Naw it runs 100% on full OC 1440. I only have issues with radio occassionally, but thats because i cant make up my mind which is better, KB1 or KB3. But yea, mos def a daily driver. Ive drained my battery in 1/3 of the time i usually do, playing with my phone so much. Much appreciated sir, if you need more experienced feedback, let me know, I've done some work with android, just dont have the time as of late, but logcats etc are easy and not that taxing on my time
Click to expand...
Click to collapse
i used(on uv now, will use again) this kernel, as a daily driver, longer than any other. it definitely deserves respect. btw, i use KB1, and also had a hard time decided which radio i liked best

Hey Morfic, I have a question, when you were applying the patches for the kernels with BFS, were you using this file or a different one? 2.6.37-sched-bfs-363.patch

adewey234 said:
Hey Morfic, I have a question, when you were applying the patches for the kernels with BFS, were you using this file or a different one? 2.6.37-sched-bfs-363.patch
Click to expand...
Click to collapse
359 and later 363, but been a while.
Curious to see if superuser still hangs in "VM_WAIT" with 363 now or not.
Sent from my Nexus S

Mine was stable at 1.4ghz, but crashing constantly at 1.44ghz.

terryhau said:
Mine was stable at 1.4ghz, but crashing constantly at 1.44ghz.
Click to expand...
Click to collapse
Exactly the same issue I had.

How can you guys get almost 4000 in quadrant scores.
The maximum I got w/ this kernel was 3100, for me the phone is reallly fast but if you have more I want this more that I don't have.
Thanks,

liquelt said:
How can you guys get almost 4000 in quadrant scores.
The maximum I got w/ this kernel was 3100, for me the phone is reallly fast but if you have more I want this more that I don't have.
Thanks,
Click to expand...
Click to collapse
set your cpu to 1440/1440, then test 4 times in a row. the 1st is always much lower then the rest. the 3rd or 4th test should be more accurate.

First - 3091
Second - 3247
Third - 3770
Forth - 3813
Fifth - 3591
So here is my results, thanks for this FANTASTIC KERNEL.

liquelt said:
First - 3091
Second - 3247
Third - 3770
Forth - 3813
Fifth - 3591
So here is my results, thanks for this FANTASTIC KERNEL.
Click to expand...
Click to collapse
there you go, good ole #4

@800MHZ is the voltage the same or lower than 1GZ?

[KERNEL] CM7 Nightly kernel with OC/RAM hack + tweaks

Howdy,
I've been using the CM7 nightly builds for a while now and figured it'd be nice to have a kernel that's based on CM7 with overclocking, RAM hack and couple of other tweaks. This kernel is pretty similar to the volkKernel but I wanted to have my own
Changes:
* Overclocking up to 1500 mhz (only through pimp my cpu at the moment)
* Default I/O scheduler of NOOP
I'll try to keep it up to date with the latest CM7 kernel sources.

[Releases]
Third release based on nightly #114
http://www.mediafire.com/?r57gqyuvhujwk6g
Second release based on nightly #101
* Removed RAM hack
* Balanced out the CPU clock values a little bit
http://www.mediafire.com/?1waipap3c71hat3
Initial release based on nightly #79
http://www.mediafire.com/file/w3e0s3vxwtznclz/cm7_79.zip

very nice welcome on board ^^

fallout0 said:
Howdy,
* Overclocking up to 1500 mhz (only through pimp my cpu at the moment)
Click to expand...
Click to collapse
Can't use setcpu?

i would like to use OC via CMParts ^^

Hmmm pardon me for asking, but why is it a 32mb RAM hack now instead of 64mb? Is it to resolve the gallery bugs?

I am using the original cpujauste o/c code that's why it only works with pimp my CPU. ill look into the others tomorrow to get that working
The 64mb hack caused issues for people with 1080p recording and the gallery. ill try it again and see how it works

ok, i found some bugs.
1. Reboot doesn't work. I guess thats because of the 32MB Ram Hack (for the vorkkernal, reboot doesn't work either)
2. After running a couple of hours, you only get around 50% of your CPU performance. Maybe the scheduler isn't optimized well. I recognized it by playing n64oid and it has lagged. Also I only get 3900 points at Antutu instead of ~5000 points.

ranrick said:
ok, i found some bugs.
1. Reboot doesn't work. I guess thats because of the 32MB Ram Hack (for the vorkkernal, reboot doesn't work either)
2. After running a couple of hours, you only get around 50% of your CPU performance. Maybe the scheduler isn't optimized well. I recognized it by playing n64oid and it has lagged. Also I only get 3900 points at Antutu instead of ~5000 points.
Click to expand...
Click to collapse
I think it's actually booting at ~700mhz by default so unless you set it up in pimp my cpu it'll stay at ~700 mhz. Probably why it's lagging.

We need more people working on kernels, thanks for doing so. Any improvements on battery life? Personally I find CM7 battery life to be pretty bad.

fallout0 said:
I think it's actually booting at ~700mhz by default so unless you set it up in pimp my cpu it'll stay at ~700 mhz. Probably why it's lagging.
Click to expand...
Click to collapse
Yep, now running with 1ghz again ^^

Can i request Voodoo Sound support?

Hey fallout0,
Nice work mate.
I think the general consensus is to not have the 64mb hack in kernels judging from a couple of poles about only 20% wanting the hack, probably less now.
I prefer to not have the hack at all imho, far too many instabilities for zero gain that being said I have yet to find a completely stable o/c kernel to use - stock seems to be the only completely stable kernel.
Be trying yours later on today so keep up the good work!
-smc

somemadcaaant said:
Hey fallout0,
Nice work mate.
I think the general consensus is to not have the 64mb hack in kernels judging from a couple of poles about only 20% wanting the hack, probably less now.
I prefer to not have the hack at all imho, far too many instabilities for zero gain that being said I have yet to find a completely stable o/c kernel to use - stock seems to be the only completely stable kernel.
Be trying yours later on today so keep up the good work!
-smc
Click to expand...
Click to collapse
Hey
Cheers
The ram hack and even overclocking support are pretty nasty hacks. Having said that I like the ability of adjusting voltages/maximum frequencies and until there is a better solution I think it's worth having this one
I agree about the RAM hack. I tried volkKernel and besides the reboot issue I didn't have any problems with the 32mb RAM hack. However the extra 32mb of RAM might not even be that useful.
I'll see how things pan out with this one then remove/add things as people complain

fallout0 said:
Hey
Cheers
The ram hack and even overclocking support are pretty nasty hacks. Having said that I like the ability of adjusting voltages/maximum frequencies and until there is a better solution I think it's worth having this one
I agree about the RAM hack. I tried volkKernel and besides the reboot issue I didn't have any problems with the 32mb RAM hack. However the extra 32mb of RAM might not even be that useful.
I'll see how things pan out with this one then remove/add things as people complain
Click to expand...
Click to collapse
Can't the reboot issue be easily resolved? According to RC, the bootloader expects the reboot-information to be at 128MB + 11 bytes, while the system writes it to [MB Reserved for Graphics]+11 bytes. As long as no ram-hack is applied, it'll of course be in the right place. Shouldn't it be easy for a kernel to just copy what is at [MB RESERVED]+11 to [128MB]+11 before shutdown?
Just talking by the seat of my pants here, haven't looked at any of the sourcecode, but it certainly feels feasible.
::Trym

I wish for that kernal:
- option on 32mb hack
- AVP/SD ram OC
- CMPart OC settings
thats it ^^

He-hey!))) This kernel is almost burnt my phone off.... Came upstairs after the dinner and found the phone off and very-very hooot... So, now I'm waiting for it to cool down a bit... Hope it'll turn on again)))
Update: Thank God that it didn't turn into BRICK))) Came on again and I've flashed it back to vorkkernel.
I am using MIUI ROM.

Very good works!! I have now tested with CM7 ROM "nightly full-77" version.
Fantastic Quadrant Score!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

TrymHansen said:
Can't the reboot issue be easily resolved? According to RC, the bootloader expects the reboot-information to be at 128MB + 11 bytes, while the system writes it to [MB Reserved for Graphics]+11 bytes. As long as no ram-hack is applied, it'll of course be in the right place. Shouldn't it be easy for a kernel to just copy what is at [MB RESERVED]+11 to [128MB]+11 before shutdown?
Just talking by the seat of my pants here, haven't looked at any of the sourcecode, but it certainly feels feasible.
::Trym
Click to expand...
Click to collapse
I thought about it, and decided against it. Writing random information into active RAM is never a good idea.

so far so good with this kernel on RC1...
we want more OC !!!
moooooooore!

[KERNEL][DemonsBlood][3.0][4.2.2][v5] OC/UV update 04/04/2013

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PRESENTS​
NOTE​THIS KERNEL WILL NOW WORK WITH CURRENT 4.2.2 ROMS WITH ALL FIXES​
DEMONS BLOOD 3.0 FOR 4.2.2 ROMS. THIS IS STILL IN TESTING AND ALL FEED BACK IS WELCOME.
DOWNLADS
04/04/2013
FEATURES
OC/UV
SD CARD SPEED TWEAKS
BATTERY OPTIMIZATIONS
RAM INCREASE OPTIMIZATIONS
MUILTI GOV'S
I/O TWEAKS AND ADDED SCHEDULERS
CREDITS
CAMCORY
SMARTGUY004
ARCO68
OISIS
SOURCES
MY GITHUB

03/16/2013
MORE RAM!!!!
battery improvments
04/04/2013
more ram upped to 369
new govs
better battery
dialed oc down to 1.6 for stability and safety

AWWWEEE YEAAHH!!!!! I love your kernels tim! Cant wait for bluetooth to be fixed in 4.2.2 roms so I can test this out!

What is difference between this and SMARTGUY004 kernel?
Correct me if I'm wrong both are 3.0.68 builts.
It looks like same overcloking, governors, etc.
Thank you.

I tried this and my phone froze up like crazy, this was with the Baked Black Bean ROM. I did all the usual things to install and rebooted twice, still froze up. I tried to change CPU settings with No Frills and the phone froze up on both attempts. No complaining just reporting what happened in my case, it might work just fine for others.

ArtfulDodger said:
I tried this and my phone froze up like crazy, this was with the Baked Black Bean ROM. I did all the usual things to install and rebooted twice, still froze up. I tried to change CPU settings with No Frills and the phone froze up on both attempts. No complaining just reporting what happened in my case, it might work just fine for others.
Click to expand...
Click to collapse
might just be your phone.... either way baked black bean rom already comes preloaded with this overclockable kernel...

ReckYoChips said:
might just be your phone.... either way baked black bean rom already comes preloaded with this overclockable kernel...
Click to expand...
Click to collapse
Yeah but it's nice to have all the extra govs & so forth. 500 points higher on Quadrant is nothing to sneeze at either, though most of it is I/O related.

Re: [KERNEL][DemonsBlood][3.0][4.2.2][v3] OC/UV
Running great here
Sent from my SGH-T679

ReckYoChips said:
might just be your phone.... either way baked black bean rom already comes preloaded with this overclockable kernel...
Click to expand...
Click to collapse
I tried it again, this time with much better results. Don't know why the difference this time as I flashed it exactly as before but glad I did. Check out the benchmark on this one! That's the highest I've ever gotten, and I'm not OCd above 1.6.

Re: [KERNEL][DemonsBlood][3.0][4.2.2][v3] OC/UV
ArtfulDodger said:
I tried it again, this time with much better results. Don't know why the difference this time as I flashed it exactly as before but glad I did. Check out the benchmark on this one! That's the highest I've ever gotten, and I'm not OCd above 1.6.
Click to expand...
Click to collapse
Glad its now working for you. How's battery life for everyone
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Its the best IMO . I get around 6-8 hrs of heavy usage

Re: [KERNEL][DemonsBlood][3.0][4.2.2][v3] OC/UV
N/A

Re: [KERNEL][DemonsBlood][3.0][4.2.2][v3] OC/UV
ArtfulDodger said:
So far same as stock kernel that comes with the ROM. That's one thing about 4.2 ROMs is that battery consumption has been higher than any other ROMs. Can't really pin it down other than Maps, screen and the android OS in general. Nonetheless happy with the ROM and the kernel too as it's the best JB performance you're going to get with this phone.
Sent from my SGH-T679 using xda app-developers app
Click to expand...
Click to collapse
Try greenify on Google maps. Maps will drain even when not in use.
Sent from my SGH-T679 using xda app-developers app

Re: [KERNEL][DemonsBlood][3.0][4.2.2][v3] OC/UV
ricedragon said:
Try greenify on Google maps. Maps will drain even when not in use.
Sent from my SGH-T679 using xda app-developers app
Click to expand...
Click to collapse
Did, doesn't work but thanks for the suggestion.
Damn phone froze up again so things were short lived I hate to report. Bad enough I had to restore my nandroid of CM 10.1 since re flashing the ROM didn't solve anything. I was looking at starting over so I had to say sh** on it. Should have left well enough alone. Again no reflection on Tim's work just something maybe I did wrong, IDK.
Sent from my SGH-T679 using xda app-developers app

New Build
V4 is now available check op for changes

Tim1928 said:
V4 is now available check op for changes
Click to expand...
Click to collapse
Ironically working great with CM 10.1. Free memory seems easier to come by than with the Chimera built-in kernel which is why I wanted to give this version a try. I was getting lag whenever using memory hogging apps like Gnow & Poweramp at the same time, and Awesome Beats was getting closed every time I tried to activate it. So far none of that. Set CPU to 368 min, 1636 max, row I/O and fantasy scheduling.
Great job as usual. Now that I've said that, my phone will start acting up no doubt!

Re: [KERNEL][DemonsBlood][3.0][4.2.2][v3] OC/UV
ArtfulDodger said:
Ironically working great with CM 10.1. Free memory seems easier to come by than with the Chimera built-in kernel which is why I wanted to give this version a try. I was getting lag whenever using memory hogging apps like Gnow & Poweramp at the same time, and Awesome Beats was getting closed every time I tried to activate it. So far none of that. Set CPU to 368 min, 1636 max, row I/O and fantasy scheduling.
Great job as usual. Now that I've said that, my phone will start acting up no doubt!
Click to expand...
Click to collapse
Let's hope this one works better for you. How's battery life vs v3
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Tim1928 said:
Let's hope this one works better for you. How's battery life vs v3
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Have had it only a few hours and plugged in to my USB port to charge just after flashing. Tomorrow I should get a good idea, I'll let you know. The RAM benefit alone is worth it regardless even if battery was worse. Memory always makes this phone a challenge to use as everybody knows!

Re: [KERNEL][DemonsBlood][3.0][4.2.2][v3] OC/UV
Installed configured and used in beta testing of an online game. Smoother and more responsive and game likes it as well. Had many crashes on 4.2.1 with earlier version with beta game test but not system now both on 4.2.2 seems good paired.
Curious as to OC @ 1631 versus 1604 not that I care cause my cpu handles up to 1881 with no crashes though 1804 I spaced and used it for a week with no ill results.
Anyways I will watch battery drain and can only compare right now to latest chimera version. Started off with massive drain on it untill it settled in and had 2 errors constant on boots that finally tapered to 1. Yours so far started off with 1 but after settled for a bit on boot it fixed itself. Beginning to think the error is due to swapsd as I no longer see the checks happen but the mounts are right. If case be then I care not and don't care as is anyways.
Great kernel so far. Thanks
Sent from my SGH-T679 using xda premium

Re: [KERNEL][DemonsBlood][3.0][4.2.2][v3] OC/UV
Battery life has definitely increased by 3% per hour in rootbox 4.2.2 using your v4 over my previous install.
Both chimera and dbk for 4.2 are outstanding performers so win win all the way around. I OC @ 1.6 no matter what and have not had 1 stutter yet since installed within moments of your post of new version.
Had to do double take and verify it wasn't misleading on drain as I accepted fast drains in 4.2.2 nope it isn't fast drains now.
Gratzy and much thanks
Sent from my SGH-T679 using xda premium

incredible s becoming unusable

Hi guys,
I think I am at the point in my ownage of the incredible s where I am about ready to launch it off the wall as its driving me mad. It seems to work ok for a little bit then gradually lags and lags and lags until its almost unresponsive. Rebooting the phone just seems to make it go weird, with the gallery losing all the photos/videos etc and requiring a rescan to show everything back where it should be. Apps become so slow that i dont use them (worst of which is Songpop) and im now at the end of my tether.
Is this a common theme with this phone? It is currently unrooted, with the stock 4.0.4 android, and sense 3.6. would rooting it and putting a new rom on solve this?
cheers everyone
Ray

labpedro said:
Hi guys,
I think I am at the point in my ownage of the incredible s where I am about ready to launch it off the wall as its driving me mad. It seems to work ok for a little bit then gradually lags and lags and lags until its almost unresponsive. Rebooting the phone just seems to make it go weird, with the gallery losing all the photos/videos etc and requiring a rescan to show everything back where it should be. Apps become so slow that i dont use them (worst of which is Songpop) and im now at the end of my tether.
Is this a common theme with this phone? It is currently unrooted, with the stock 4.0.4 android, and sense 3.6. would rooting it and putting a new rom on solve this?
cheers everyone
Ray
Click to expand...
Click to collapse
It should. The stock sense ROM was quite bloated and slow. In comparison, even optimized sense stock based ROMs like blackout ICS run circles around stock. A new kernel will do a good job too
I had major slowdowns on stock but on blackout ICS (which is probably the stockest sense ROM I can recommend) everytnkngs much better
That's my opinion on it
Sent from my Nexus 7 using the xda app

markj338 said:
It should. The stock sense ROM was quite bloated and slow. In comparison, even optimized sense stock based ROMs like blackout ICS run circles around stock. A new kernel will do a good job too
I had major slowdowns on stock but on blackout ICS (which is probably the stockest sense ROM I can recommend) everytnkngs much better
That's my opinion on it
Sent from my Nexus 7 using the xda app
Click to expand...
Click to collapse
Cheers Mark, I'll have a look at rooting and see what happens
Ray

labpedro said:
Hi guys,
I think I am at the point in my ownage of the incredible s where I am about ready to launch it off the wall as its driving me mad. It seems to work ok for a little bit then gradually lags and lags and lags until its almost unresponsive. Rebooting the phone just seems to make it go weird, with the gallery losing all the photos/videos etc and requiring a rescan to show everything back where it should be. Apps become so slow that i dont use them (worst of which is Songpop) and im now at the end of my tether.
Is this a common theme with this phone? It is currently unrooted, with the stock 4.0.4 android, and sense 3.6. would rooting it and putting a new rom on solve this?
cheers everyone
Ray
Click to expand...
Click to collapse
A factory reset could already get it better ( don't forget to backup important data like contacts ) but if you install a custom ROM you will be able to get the best result for the reasons stated in previous post
Sent from my Incredible S using xda app-developers app

well, I did a factory reset on sunday and its running a lot better with no huge slowdowns (yet). I did look at the guides for rooting/s-offing the inc s however whilst I am not a n00b, and consider myself to be proficient in most things, the guide has me baffled as to what to do.
Ah well, looks like im stuck with stock for now

labpedro said:
well, I did a factory reset on sunday and its running a lot better with no huge slowdowns (yet). I did look at the guides for rooting/s-offing the inc s however whilst I am not a n00b, and consider myself to be proficient in most things, the guide has me baffled as to what to do.
Ah well, looks like im stuck with stock for now
Click to expand...
Click to collapse
try bootloader unlock. its easier and you just have to remember to fastboot flash the boot.img after a rom flash my inc s absolutely speeds on a custom rom but now i use my gs3 as my main device and my inc s is a lag piece of crap compared to that thing quad core <333

poondog said:
It should. The stock sense ROM was quite bloated and slow. In comparison, even optimized sense stock based ROMs like blackout ICS run circles around stock. A new kernel will do a good job too
I had major slowdowns on stock but on blackout ICS (which is probably the stockest sense ROM I can recommend) everytnkngs much better
That's my opinion on it
Sent from my Nexus 7 using the xda app
Click to expand...
Click to collapse
Hello poondog. I have no permitted to post to development-related forums.
I use Kangaroo Kernel r8, and I overclock to 1.497Ghz,then it stuck;after reboot, I oc to 1.2Ghz, and then it also stuck.
I changed the vdd_level but the problem not solved.
But I use redux 0.8 kernel and oc to 1.497Ghz with default vdd_level, it's works fine, no stuck.
Any idea with this problem?

Volftooth said:
Hello poondog. I have no permitted to post to development-related forums.
I use Kangaroo Kernel r8, and I overclock to 1.497Ghz,then it stuck;after reboot, I oc to 1.2Ghz, and then it also stuck.
I changed the vdd_level but the problem not solved.
But I use redux 0.8 kernel and oc to 1.497Ghz with default vdd_level, it's works fine, no stuck.
Any idea with this problem?
Click to expand...
Click to collapse
Hi
Yeah something is messed up in the acpu table, szezso also had the same as me and he reverted it. I think I will do the same
Its not your fault its mine, ever since I changed stuff in the acpu table from 3.4
Next release will have it fixed, thanks for your interest

poondog said:
Hi
Yeah something is messed up in the acpu table, szezso also had the same as me and he reverted it. I think I will do the same
Its not your fault its mine, ever since I changed stuff in the acpu table from 3.4
Next release will have it fixed, thanks for your interest
Click to expand...
Click to collapse
Thanks for your reply.
I will waiting for your next release.

Volftooth said:
Thanks for your reply.
I will waiting for your next release.
Click to expand...
Click to collapse
No problem I am doing it now

poondog said:
No problem I am doing it now
Click to expand...
Click to collapse
You are so fast!!
I tried the newest r9 kernel.oc cpu to 1.2GHz 1.4GHz works fine, up to 1.497Ghz it stuck.
And I guess you might missing 184320 and 192000 in freq table.
because I see them in CPU Voltages list use Trickster MOD, and I not see them in OC options drop-list when I tap it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Waiting for your answer.
ps: 2 posts left I can post to the development-related forums
sorry for op I borrowed your thread

Volftooth said:
You are so fast!!
I tried the newest r9 kernel.oc cpu to 1.2GHz 1.4GHz works fine, up to 1.497Ghz it stuck.
And I guess you might missing 184320 and 192000 in freq table.
because I see them in CPU Voltages list use Trickster MOD, and I not see them in OC options drop-list when I tap it.
Waiting for your answer.
ps: 2 posts left I can post to the development-related forums
sorry for op I borrowed your thread
Click to expand...
Click to collapse
Nearly there
Must be the voltages don't like your device. (too low)
Because it works fine on my phone :thumbup:
Even 2GHz works
I do not have 184 or 192 cause imo it doesn't need them, they are too close to 122 and 245. Too many frequences close together is not always good, especially for some governors
Try this: Boot the phone again to default settings, go to voltages, bump them all up by like 50 or 100 and then try set it to 1.5

poondog said:
Nearly there
Must be the voltages don't like your device. (too low)
Because it works fine on my phone :thumbup:
Even 2GHz works
I do not have 184 or 192 cause imo it doesn't need them, they are too close to 122 and 245. Too many frequences close together is not always good, especially for some governors
Try this: Boot the phone again to default settings, go to voltages, bump them all up by like 50 or 100 and then try set it to 1.5
Click to expand...
Click to collapse
You are right! I bump up by 50 and it works.The voltage on 1497600 now is 1300.
But I have a qustion: I used Redux 0.8 kernel before, and I adjust the voltage on 1497600 is 1200, it works fine.
why kangaroo r9 can not running on 1497600 by voltages 1200 ?

Volftooth said:
You are right! I bump up by 50 and it works.The voltage on 1497600 now is 1300.
But I have a qustion: I used Redux 0.8 kernel before, and I adjust the voltage on 1497600 is 1200, it works fine.
why kangaroo r9 can not running on 1497600 by voltages 1200 ?
Click to expand...
Click to collapse
Not entirely sure, it might be a combination of a lot of things. Kangaroo and Redux are two entirely different beasts

[Q&A] AICP builds by prangr8

Questions & Answers/Troubleshooting​[SIZE=+2]Specific to[/SIZE]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP​Android Ice Cold Project​
Click link here>> to return to ROM thread <<Click link here
Please feel free to share issues, questions and offer help
It is always best to thank a ROM OP, in lieu of simply posting "Thank you".
Please keep discussion focused, on the topic described in the OP

Frequently Asked Questions (FAQ's)
Q) My Bootloader Is Locked But Can I Try This Without Unlocking?
A) No. Flash this Only if you are on UBL.
Q)I'm On Locked Bootloader Please Help Me Unlock My Bootloader/Root My Phone
A) Please don't ask such questions in this thread. THere are many other threads in General Section Which Can help You.
Q) Can I dirty flash build X over Build Y?
A)(X&Y being both AICP Official Nightlies) If you want to, you may. But Report Bugs Only If You Have Clean Flashed.
Q)"ROM feels laggy after a few days of usage. Please Help Me"
A)
Go to your build.prop. At the end add these lines
dalvik.vm.image-dex2oat-filter=everything
dalvik.vm.dex2oat-filter=everything
Then Go To recovery and wipe cache/dalvik cache (don't skip this step or it won't work!!!!)
basically it makes ART compile more stuff than just the usual apps. it optimises many things.
Downside of this is a slightly longer booting time (AICP Had This Before but has now been removed)
Q) " Help!!! Can't flash anything because of ugly Cyanogen Recovery"
A) Go download Rashr from playstore and flash philz from that app or search for a TWRP Image and flash it with Rashr
Q)FM Transmitter range is very less.
A)Take your standard headphones/earphones/whatever you call it and insert it halfway into the headphone jack. Not completely, just halfway so that the phone doesn't recognise the earpods. Then transmitter range will be improved.
Q)You call it nightlies, yet an update doesn't come on a night to night basis
A) Nightlies for huashan are built in every 36-48 hours gap on the build server
Q)I want to have a lollipop xperia styled AICP
A) Install XperiaPOP Z4 Theme, [if you want you can download some more wallpapers from the link at my signatture] then search for ibanez 7 sony apps port for cm12 and install your choiced apps and enjoy a near to sony experience.
Note: This is what I do, if you have a better setup, please do share and I'll update it here
Q) How do I know when AICP for huashan is going to be built?
A) Here visit this link : http://jenkins.aicp-rom.com/job/android/
Note: If any one else wants to build a cm12.1 based ROM for XSP, here is my local manifests file, feel free to download it and use it ​

Patrikm said:
flash- said:
It's great to hear it. Thank's maaan, I'm going to try this ROM
Click to expand...
Click to collapse
don't forget to flash t-kernel with it v5.2 ...it will boost your battery and performance+a lot of features
good luck my friend and happy flashing
Click to expand...
Click to collapse

flash- said:
Patrikm said:
don't forget to flash t-kernel with it v5.2 ...it will boost your battery and performance+a lot of features
good luck my friend and happy flashing
Click to expand...
Click to collapse
Yes I will, thank's :good:
One more Q , What about free RAM ?
Now, with instagram, facebook and messenger app I have about 200MB free.
Click to expand...
Click to collapse

Patrikm said:
flash- said:
Yes I will, thank's :good:
One more Q , What about free RAM ?
Now, with instagram, facebook and messenger app I have about 200MB free.
Click to expand...
Click to collapse
you can see my review of this ROM (the review was not about this build,,,this build is more better )
free RAM with me with 50 apps installed 350mb ....use greenify app it will help you :good:
Click to expand...
Click to collapse

flash- said:
Patrikm said:
you can see my review of this ROM (the review was not about this build,,,this build is more better )
free RAM with me with 50 apps installed 350mb ....use greenify app it will help you :good:
Click to expand...
Click to collapse
Again, Thanks :good:
Click to expand...
Click to collapse

Patrikm said:
flash- said:
Yes I will, thank's :good:
One more Q , What about free RAM ?
Now, with instagram, facebook and messenger app I have about 200MB free.
Click to expand...
Click to collapse
i have 336 mb free ram right now with 82 apps (using greenify)
Click to expand...
Click to collapse

Lagging a lot
I installed this rom 3 days back.
Initially it looked pretty nice but on installing apps and other stuff it started lagging.
Random Hanging is quite common.
is this the problem with everyone or i am the only one ?

flash- said:
it work fine for me but you can expect behavior like that yeah ...but not all the time
Click to expand...
Click to collapse
Thanks!
I will flash new Build and see what heappens.

me.ashish8 said:
I installed this rom 3 days back.
Initially it looked pretty nice but on installing apps and other stuff it started lagging.
Random Hanging is quite common.
is this the problem with everyone or i am the only one ?
Click to expand...
Click to collapse
did you flashed the latest build ? anyway ...install greenify app it will help,, and flash t-kernel(v5.2) and then go to kernel auditor in settings>>AICP and set cpu governor to smartassv2 and cpu clock speed to 1.8 ghz

flash- said:
it work fine for me but you can expect behavior like that yeah ...but not all the time
Click to expand...
Click to collapse
albertojr.neto said:
Thanks!
I will flash new Build and see what heappens.
Click to expand...
Click to collapse
Update.
I flashed new build (Build 3) + Tangerine v5.2 and it got worst :crying:
Now the display flickers and doesnt show the notification.
I tried to enable/disable ambient display, but it didnt work.
Anyone knows why this is heappening?
I'll keep trying to fix it.

i wondering is there any apps for xperia or any setting on this rom that make the LED light to turn on individually (like when charging only 1 led glow), i would like to set all notification to only using 1 led
also is there any way to make status bar icon (wifi, signalbar, battery icon) more narrow ?
thank you very much

sendal773 said:
i wondering is there any apps for xperia or any setting on this rom that make the LED light to turn on individually (like when charging only 1 led glow), i would like to set all notification to only using 1 led
also is there any way to make status bar icon (wifi, signalbar, battery icon) more narrow ?
thank you very much
Click to expand...
Click to collapse
only the charging is one led. led notification is always 3 bars but you can lower its brightness by setting the color of choice near black
Sent from my Xperia SP using XDA Free mobile app

can i suggest new function?
i just want to suggest a function known as QUIET HOURS you can see this function in CM11... .
coz this function is very helpful to me.. thanks

flash- said:
avi.singh9993 said:
yes 1.8 :good:
if you need more put the i/o to zen both inter/exter ..read ahead to 128
Click to expand...
Click to collapse
Im a bit confused whith the auditor . i need my phone to be smooth in lag free in game ( even big games like real racing 3 ) but not that full throttle that drains battery fassst ! Need something kinda balanced i guess .
I put max frq to 1.8 gov to smart . gpu to 400 and io to zen. What els ?
If this drains battery fast then tell me two diff set up. Mid use (lght games ) and heavy performance . tnx
Click to expand...
Click to collapse

sendal773 said:
i wondering is there any apps for xperia or any setting on this rom that make the LED light to turn on individually (like when charging only 1 led glow), i would like to set all notification to only using 1 led
also is there any way to make status bar icon (wifi, signalbar, battery icon) more narrow ?
thank you very much
Click to expand...
Click to collapse
Unfortunately there's no option to pick individual LED's for notifications. Fortunately, as has been mentioned quite a few times before, the color of the LED's can be changed to reduce the brightness.
Do you mean reduce the icon size or the space between em? Either way don't think there's any such options in the ROM to do that but you could try some themes and pick one with statusbar icons more to your liking. Just apply the status bar part of the theme if that's all you want.
Also maybe you could check Xposed modules to see if there's one that might let you make the changes you want to though I do not know of one.

flash- said:
improved yes ...alot no
---------- Post added at 06:12 PM ---------- Previous post was at 06:09 PM ----------
it's very smooth right now..no fixes needed ...put cpu governor to smartassv2 and cpu to 1.8 .....and yes for sure the t-kernel is recommended(v5.2)
---------- Post added at 06:13 PM ---------- Previous post was at 06:12 PM ----------
don't worry my friend t-kernel v5.2 is safe and recommended for better smoothness
Click to expand...
Click to collapse
So after flashing t-kernel 5.2 u need to change governor to smartassV2 and cpu to 1.8?
If I do so will the battery saving steps in post 3 work?
And ya one more thing is xposed working fine on this ROM?
(Missing that piece of hell since KitKat!?)

albertojr.neto said:
Update.
I flashed new build (Build 3) + Tangerine v5.2 and it got worst :crying:
Now the display flickers and doesnt show the notification.
I tried to enable/disable ambient display, but it didnt work.
Anyone knows why this is heappening?
I'll keep trying to fix it.
Click to expand...
Click to collapse
the flickering screen have no solution my friend ....it's a problem between a lot of users ....if you want to adapt with it just put a colorful wallpaper and theme
for t-kernel after installing it did you put the cpu governor to smarassv2 and the cpu clock speed to 1.8 ?
you should do that
---------- Post added at 05:13 AM ---------- Previous post was at 05:10 AM ----------
ehsan rajabi said:
flash- said:
Im a bit confused whith the auditor . i need my phone to be smooth in lag free in game ( even big games like real racing 3 ) but not that full throttle that drains battery fassst ! Need something kinda balanced i guess .
I put max frq to 1.8 gov to smart . gpu to 400 and io to zen. What els ?
If this drains battery fast then tell me two diff set up. Mid use (lght games ) and heavy performance . tnx
Click to expand...
Click to collapse
for me these settings are the best and they don't drain battery for me....for big games when you play them put the GPU governor to performance and play after you finish put it back to ondemand and to 200mhz
---------- Post added at 05:15 AM ---------- Previous post was at 05:13 AM ----------
prajjwal2345 said:
So after flashing t-kernel 5.2 u need to change governor to smartassV2 and cpu to 1.8?
If I do so will the battery saving steps in post 3 work?
And ya one more thing is xposed working fine on this ROM?
(Missing that piece of hell since KitKat!)
Click to expand...
Click to collapse
yes you need to do that ....the battery on these settings is good for me but you can try the ones on post #3
and yes xposed is working on it :good:
Click to expand...
Click to collapse

ehsan rajabi said:
flash- said:
Im a bit confused whith the auditor . i need my phone to be smooth in lag free in game ( even big games like real racing 3 ) but not that full throttle that drains battery fassst ! Need something kinda balanced i guess .
I put max frq to 1.8 gov to smart . gpu to 400 and io to zen. What els ?
If this drains battery fast then tell me two diff set up. Mid use (lght games ) and heavy performance . tnx
Click to expand...
Click to collapse
If you want GPU intensive games to run lag free, then you need your cpu/gpu operating near its max level and that costs battery life. On the other hand if you're gonna run these type of games with reduced cpu/gpu settings then you will get choppy performances. Can't have it both ways I am afraid.
Also everyone's phone is gonna have different battery life even with the same kernel aduitor settings depending on everything else going on on their phones. It seems like you are asking for more tweaks even before thoroughly testing out the ones you know of on your own phone.
Now if you are playing light/medium games which don't require as much cpu/gpu power and you wanna extend battery life, you can always drop your cpu/gpu clocks and change the CPU governor. Maybe something like Conservative or even Powersave(locks the CPU frequency at the lowest frequency set by the user). Also enable Multicore Power Saving. Latest kernel doesn't have undervolting option or you could have tried that.
Disable Auto brightness and reduce the brightness.
Greenify/kill background apps while playing games.
Click to expand...
Click to collapse

XenolithicYardZone said:
ehsan rajabi said:
If you want GPU intensive games to run lag free, then you need your cpu/gpu operating near its max level and that costs battery life. On the other hand if you're gonna run these type of games with reduced cpu/gpu settings then you will get choppy performances. Can't have it both ways I am afraid.
Also everyone's phone is gonna have different battery life even with the same kernel aduitor settings depending on everything else going on on their phones. It seems like you are asking for more tweaks even before thoroughly testing out the ones you know of on your own phone.
Now if you are playing light/medium games which don't require as much cpu/gpu power and you wanna extend battery life, you can always drop your cpu/gpu clocks and change the CPU governor. Maybe something like Conservative or even Powersave(locks the CPU frequency at the lowest frequency set by the user). Also enable Multicore Power Saving. Latest kernel doesn't have undervolting option or you could have tried that.
Disable Auto brightness and reduce the brightness.
Greenify/kill background apps while playing games.
Click to expand...
Click to collapse
thanks man but you should quote or mention him not me (he need these info ):silly:
but thanks
Click to expand...
Click to collapse